Positioning stages

Stroke : 1,951, 2,815 mm
Speed: 0.73, 0.47 m/s

2RB (SuperSlide) Linear Tables Thomson's 2RB (SuperSlide) positioning slides are continuously and intermittently supported systems with integral screw assemblies in both metric and english standard units. Based on Thomson's ...

Speed: 33.3, 10, 25, 8.3, 41.67 m/s

2DB (SuperSlide) Linear Tables Thomson's 2DB (SuperSlide) positioning table is a continuously supported system designed for rigid applications moving medium to heavy duty loads. The table comes from ...

Stroke : 50 mm - 3,500 mm
Speed: 4,000 mm/s
Repeatability: 0.05 mm

... the customer's requirements, our technical team designed the following structure. Belt Driven Actuator Multi-axis Positioning Stage Linear Motion Gantry Robot

Stroke : 50 mm - 1,500 mm

... running stability, and a load of up to 120kg. It is mainly used for high-load and high-precision companies. The repeat positioning accuracy can reach ± 0.02mm. It is currently the most popular high-load product in the ...

Stroke : 50 mm - 1,500 mm
Speed: 350 mm/s - 500 mm/s

... module, fully enclosed structure, body width 120mm, two guides and four sliders, with high precision, multi-segment repeat positioning, compact structure, strong versatility, suitable for use in special environments. Range ...

Stroke : 0 mm - 200 mm
Load: 1, 2, 5 kg

Manual positioning table drived by metric fine thread screw. Actuated by grip knob. Guided by 2 rods on bronze bearings. Robust and economical table. Interchangeable with the 309B range. Options ...

Stroke : 0 mm - 200 mm
Load: 1, 2, 5 kg

Economical manual positioning table drived by leadscrew. Actuated by grip knob. Guided by 2 rods on bronze bearings. Options : Positioning indicator Position clamping Base plate ...

Stroke : 0 mm - 400 mm
Load: 2 kg - 50 kg

Manual positioning table drived by lead screw Guided by 2 rods on bronze bearings or ball bushings Options : Handwheel or grip knob Positioning indicator Position clamping Assembly ...

Stroke : 1 mm - 40 mm
Speed: 1 mm/s - 200 mm/s
Repeatability: 0.3 µm - 5 µm

LA92 High Speed UHV Linear Axis Application: High resolution and fast scanning applications Benefit: Fast positioning in UHV, also vertically Features: Outstanding resolution, very slim, with internal motor • ...

Stroke : 1 mm - 130 mm
Speed: 1 mm/s - 10 mm/s
Repeatability: 0.4 µm - 5 µm

LA170 Precise high load XYZ linear axis Application: Transport Stage, scanning stage for high loads Benefit: High life time despite dry lube Features: lead screw with dry lube or ball screw with ...

Stroke : 1 mm - 100 mm
Speed: 1 mm/s - 10 mm/s
Repeatability: 0.4 µm - 5 µm

LT300 Precise high load linear stage Application: Transport Stage, scanning stage for high loads Benefit: High life time despite dry lube Features: lead screw with dry lube or ...

Stroke : 0 mm - 920 mm

Designed for manual adjustment with stellar price-performance ratio, the RK Compact profile linear actuator ensure optimum adaptability of supplements and individual components while reducing assembly and increasing precision. This ...

GCM-TPS series products are compact high-precision stainless steel translation stages of Daheng Optics. The thickness is 16mm and the travel is 13mm and 25mm. The platform size is 40X40mm and 65x65mm respectively. They ...

Stroke : 6.5, 12.5 mm

... products are high-precision translation stages of Daheng Optics.The stage is constructed with a full aluminum body and crossed-roller steel bearings for precision motion and high-load capacity. The thickness ...

Stroke : 6.5 mm

GCM-T Series Translation Stages manufactured by Daheng Optics, which is made of aluminum alloy. These stages use crossed-roller bearings to support precision motion and high load capacities. The translation ...

SPIDER - POLYVALENT PALLETIZER • Maximum gripping surface • Reduced drive inertia • Ideal for handling, positioning and storing

... Motion control in position by Ethernet protocol • Configurable motion speed and acceleration • Accurate and vibration-free positioning en-ables optimal reading • Optional vibration of micro plates in reading position ...

Stroke : 100 mm - 1,500 mm

Characteristics Product type • Linear table Characteristics • Linear table for precise postioning • Integrated Aluminium roller guide • Spindle drive • Metal cover Stroke lengths • Infinitely variable from 100 to 1500 mm

Stroke : 26 mm
Speed: 20 mm/s
Repeatability: 40, 200 nm

... piezo stage show the dimensions and specifications of an SLC-1740 for atmospheric or HV environments, equipped with an S-position sensor. For technical drawings and detailed specifications of other variants, such as UHV ...

Stroke : 31 mm
Speed: 20 mm/s
Repeatability: 40, 200 nm

... piezo stage show the dimensions and specifications of an SLC-1750 for atmospheric or HV environments, equipped with an S-position sensor. For technical drawings and detailed specifications of other variants, such as UHV ...

Stroke : 41 mm
Speed: 20 mm/s
Repeatability: 40, 200 nm

... piezo stage show the dimensions and specifications of an SLC-1760 for atmospheric or HV environments, equipped with an S-position sensor. For technical drawings and detailed specifications of other variants, such as UHV ...

Stroke : 0.5 in

Ball Slide Positioning Stage (plain model with no micrometers) Please note: This unit is supplied with no micrometers, no micrometer brackets and no springs. Work surface dimensions, height dimensions, ...

Stroke : 0.5 in

Ball Slide Positioning Stage Family: 100 Model: 101-XY Price: $ 420.00 Add metric micrometer heads w/standard inch threaded holes $0.00 Add Posi-Lock carriage lock $108.00

Stroke : 13 in

Ball Slide Positioning Stage Family: 100 Model: 101MM-XY Price: $ 420.00 Add metric micrometer heads w/standard inch threaded holes $0.00 Add Posi-Lock carriage lock $108.00

Opto´s Measuring Stage 25 x 25mm analog is designed for incident and transmitted light application. Technical Features Glass plate D=100mm for incident and transmitted light application - Cover plate 135 x 135mm - ...

Opto´s Measuring Stage 50 x 50mm analog is designed for incident and transmitted light application. Technical Features - Glass plate D=100mm for incident and transmitted light application - Cover plate 135 x 135mm - ...

Measuring Stage 50x50mm Analog Technical Features Aricle Number 100-MS50-AN - Cover plate 135 x 135mm - Stage height = 35mm - Maximum load 10kg - with 2 manual micrometer spindles Measurement ...

Stroke : 28 mm - 5,694 mm
Speed: 9 m/s
Repeatability: 5 µm

... features a cable outlet for added versatility in its applications. Information of this linear motor stage Capacities of this linear motor stage: Measuring system repeatability: ± 0,5 μm Maximum ...

Stroke : 52 mm - 5,716 mm
Speed: 9 m/s
Repeatability: 5 µm

MLC5 linear motor stage: electromechanical actuator for automation MLC5 is a covered linear motor stage, certified for ISO3 clean room environments. It stands as the optimal choice for applications ...

Stroke : 8 mm - 3,272 mm
Speed: 9 m/s
Repeatability: 10 µm

... under demanding cleanliness and particle control conditions. Information of this linear motor stage for Cleanroom Capacities of this linear motor stage: Measuring system repeatability: ± 1 μm Maximum ...

Stroke : 10 mm
Speed: 1.5 mm/s

10mm travel with 22 x 15 mm footprint compact design smallest product in our portfolio Ultra small miniature translation stages with piezo electic inertial drive.

Stroke : 3.5 mm
Speed: 1.5 mm/s

3.5mm travel with 15 x 15 mm footprint compact design smallest product in our portfolio Ultra small miniature translation stages with piezo electic inertial drive.

Stroke : 8 mm
Speed: 1.2 mm/s

... for various application fields our all-rounder multi axes combinations without adapter plates Miniature translation stage with piezo electric inertial drive.

Stroke : 100 mm
Speed: 3 m/s

... testing, alignment and component assembly in any application on the factory floor or laboratory environments. The precision ball screw or micrometer grade lead screw provide excellent accuracy and repeatability with ...

Stroke : 100 mm
Speed: 40, 100 mm/s

... are driven by preloaded zero-clearance ball screw/nut system. These units achieve travel speeds of up to 80 mm/sec and a positioning repeatability of 5 microns when driven with rotary stepper or brushless servo motors. ...

Stroke : 200 mm
Speed: 40, 100 mm/s

... are driven by preloaded zero-clearance ball screw/nut system. These units achieve travel speeds of up to 80 mm/sec and a positioning repeatability of 5 microns when driven with rotary stepper or brushless servo motors. ...

Stroke : 3.81 cm - 64.77 cm
Repeatability: 4 µm
Load: 6.8 kg

The smallest of the UniSlide Linear Stages with a body width of 1.5 inches, slider length of 1.5 inches and a carrying capacity of 15 lbs. horizontal load. The A15 can travel up to 25.5" with the 1.5" slider/carriage. ...

Stroke : 3.81 cm - 62.23 cm
Repeatability: 4 µm
Load: 13.6 kg

The A25 Series UniSlide stage has a body width of 2.5 inches, slider length of 2.5 inches and can carry a 30 lbs. horizontal load. The A25 can travel up to 24.5" with the 2.5" slider/carriage. A25 Series UniSlides ...

Stroke : 5.08 cm - 96.52 cm
Repeatability: 4 µm
Load: 45.5 kg

The A40 Series UniSlide stage has a body width of 4 inches, slider length of 4 inches carrying a 100 lbs. horizontal load. The A40 can travel up to 38" with the 4" slider/carriage. The A40 is very versatile for a variety ...

Stroke : 250, 300, 150, 200, 100 mm

Zaber's LC40B-KM Series of motorized linear guides are belt-driven recirculating ball bearing guides designed to interface seamlessly with most 40 mm T-slot extrusion framing systems and accessories. Hardened bearing steel rails are mated ...

The TSB series is a unit manufactured by Zaber. They are ball bearing linear stages having a 28 mm or 60 mm of travel that aree compatible with T-LA series miniature linear actuators. It has a capacity of 10 kg ...

... closed-loop, belt-driven motorized linear stage with a built-in motor encoder and controller. With travel lengths up to 3 m, 10 µm repeatability, and a maximum speed of 2.0 m/s, X-BLQ-E stages are ...

Stroke : 12 mm - 320 mm

This platform is a hybrid planar mechanical/air bearing platform dedicated to step and scan applications. It is a 6 axes platform moving in X, Y, Z and Theta directions. Dynamic flatness over the full travel as well as bidirectional repeatability ...

TILTING-ROTATING TABLE COLIBRÌ The Colibrì rotary-tilting table was designed to meeting the need for 5-axis machining operations for the manufacturing of glasses with dedicated NC machines. The main advantage of this table is without ...

... hydraulic clamps feed by pneumatic pressure multiplier •Maintenance free •Superior dynamic performance •High degree of positioning accuracy

Stroke : 25 mm
Speed: 2.9 m/s

The 3DMS is a motorized translation stage with sub-micron precision that is capable of converting a conventional Sutter MP-285 manipulator into the 3-dimensional motorized stage. It consists of a manipulator ...

Stroke : 22 mm

The MT-1000/MT-2000 and MT-2200 Microscope translator and tower combination for fixed stage microscopes allows the user to have 2 manipulators and one sample conveniently positioned around the microscope. This system ...

Stroke : 25 mm

... 1078/MT-2078/MT-2278 systems consist of a X-Y translator and a large fixed stage. The MT-78-FS is designed for users who prefer a large platform stage for their experiments. The stage ...

Stroke : 80 mm - 120 mm
Speed: 40 mm/s - 100 mm/s
Repeatability: 0.2 µm - 0.7 µm

... applications. The H101F is the highest speed non-encoded option flat top upright stage range, featuring Prior's patented Intelligent Scanning Technology (IST) to optimize stage accuracy, linearity and ...

Stroke : 120, 72 mm
Speed: 0.3 m/s

The HLD117 series of flat top stages with linear motor technology for inverted research microscopes set new standards for convenience and performance. Designed to seamlessly integrate with other items such as micromanipulators ...

Stroke : 108 mm
Speed: 0.02 m/s

The HT1111LC ProScan™ Solid Frame Stage is designed for upright microscopes and hardness testers. The HT1111LC has a travel range of 108mm x 108mm, repeatability of 0.7 microns and a weight capacity of up to 100kg and ...

Stroke : 500, 350 mm
Speed: 0.5 m/s

The XY positioning table, manufactured by Jenaer Antriebstechnik, is a 2-axes precision table equipped with a sheet metal sealing. It has a payload capacity of 50 kg, velocity of 1 m/s, positioning resolution ...

Stroke : 490, 440 mm
Speed: 0.5 m/s

... ready for mechanical and electrical connections. It is designed with a screw lead of 20 mm, travel range of 500 x 500 mm, positioning resolution from 0.5 up to 1.0 µm, and repeatability of < 10 µm without linear measuring ...

TU Series is a compact and slim type positioning table, consisting of a U-shaped track rail and a slide table. The slide table assembled inside the U-shaped track rail is an integral part of a linear motion rolling guide ...

IKO Precision Positioning Table TE is a lightweight and compact positioning table using high-strength aluminum alloy for its main components, with a slide table assembled inside a U-shaped ...

IKO Precision Positioning Table L is a lightweight, long stroke positioning table configured with the slide table and bed made from high-strength aluminum alloy. High accuracy and carrying ...

... producing infinitely variable relative rotation of the hubs. • Phase Adjuster • Shaft Phasing Coupling • Available in 6 sizes • Torque: 500-20,000 in-lb HDI phase adjusters are available ...

Rotary Stage DT232 for Radar System - Precision Assemblies Customized solution with rotary stage Steinmeyer Mechatronik developed a system to realize a monitoring device with a radar sensor. In ...

Speed: 150 mm/s

XY scan stage for automated sample scanning | X-ray, ion radiation as well as non-tiltable beam sources e.g. synchrotron - Laboratory / Analytics Scan stage for high-precision analysis of laboratory ...

Stroke : 50 mm - 720 mm
Speed: 5 mm/s - 1,400 mm/s

This inspection system (shown here without cover) is specially designed for automated quality assurance. The positioning system allows positioning along two linear axes. A high-resolution camera or sensor ...

Stroke : 6.5 mm

... laboratory, precision fine-tuning, production machinery, inspection equipment, precision positioning, quantitative movement, and more. Single Axis : X Axis Manual Stage Feeding Position ...

Stroke : 12.5 mm

... laboratory, precision fine-tuning, production machinery, inspection equipment, precision positioning, quantitative movement, and more. Single Axis : X Axis Manual Stage Feeding Position ...

Stroke : 6.5 mm

... laboratory, precision fine-tuning, production machinery, inspection equipment, precision positioning, quantitative movement, and more. Single Axis : X Axis Manual Stage Feeding Position ...