Fans
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
... refrigerants and whose output can be intelligently adapted to the actual conditions. ebm‑papst presented the efficient AxiEco axial fans in various designs at the beginning of 2020. Thanks to their high pressure stability, ...
ebm-papst
Rotational speed: 2,800 rpm
Noise level: 10 dB
Don't give hearing damage a chance! The Sound Absorbing Fan (SAF) reduces noise by more than 10 dB, reducing the risk of hearing damage. The exhaust fans from the SAF series are equipped with sound insulation ...
PLYMOVENT
Air flow: 2,400 m³/h
... UltraFlex, Flex, T-Flex extraction arms FAN-28 is a wall-mounted extraction fan FAN-28 is especially designed to fit the large diameter (200mm) arms in our extraction arm program. ...
PLYMOVENT
Air flow: 3,000 m³/h
... with the extention crane and stationary filter The FAN 42 is an extraction fan used for small welding fume extraction systems The FAN 42 is a wall-mounted extraction fan ...
PLYMOVENT
Air flow: 186.9 m³/h
Diameter: 38 mm
Noise level: 44 dB
... dual ball bearing axial fans offering a cost effective cooling solution without sacrificing on quality or reliability. Provided are a robust die-cast aluminium frame and an AC shaded pole impedance protected motor, these ...
Air flow: 70, 80, 100 m³/min
Diameter: 450 mm
... there? Fans are available in a number of designs, depending on the application required. The most common are: • Ceiling fan • Table fan • Window fan • Tower fan • ...
Air flow: 80, 70, 100 m³/min
Diameter: 450 mm
The RS PRO high-velocity floor fan provides an airflow of 100m³/min. It keeps spaces to feel fresh to aid cooling. It has 3-speed controls and has 18in blades. It has a supply voltage of 230VAC and power rating of 110W. Features ...
Air flow: 35 m³/h - 850 m³/h
Noise level: 48 dB - 71 dB
New design, unaltered quality Kryos³ GS filters fans, for the ventilation of electrical enclosures, are the optimal solution when the ambient temperature is lower than the temperature inside the cabinet, and can be installed, ...
Air flow: 500 m³/h - 1,870 m³/h
Noise level: 52 dB - 63 dB
... radial fans on KryosROOF provide high flow rates and heads to ensure the correct airflow within the cabinet. In addition, there is a high efficiency version with EC fans and an active control probe, ...
Air flow: 452, 564, 258 ft³/min
... Long-life axial fans have an expected life of 100,000 hours, so the number of cooling fans that need replacing is decreased compared to conventional models. *1 - The conventional models are T-MRS16-BTA-G ...
ORIENTAL MOTOR
Air flow: 0.12 m³/min - 18.3 m³/min
Wide lineup including low power consumption fans (9GA type), silent fans (9S type), and high airflow (9GV), high static presure (9HV), and other sub families. This DC fan 5 VDC to ...
SANYO DENKI EUROPE
Air flow: 0.2 m³/min - 4 m³/min
The airflow has 0.21 m3/min. (7.1 CFM) to 3.8 m3/min (134 CFM) with 38 - 40 - 52 - 60 - 70 - 80 - 92 -120 mm square size. It has a pulse sensor and PWM control function. The expected life is 30000 to 60000 hours (at 60°C with 90% survival ...
SANYO DENKI EUROPE
Air flow: 0.4 m³/min - 2.45 m³/min
This S-type fan is 12V DC operated and provides up to 2,45 m3/min (86,5 CFM) air flow, ranging in 60mm, 80mm, 92mm, 120mm square by 25mm thickness. With various styles and lifespan of 40,000 hours at 60°C. Has reduced ...
SANYO DENKI EUROPE
Air flow: 14 m³/h - 630 m³/h
The 7F Series of fans and filter fans for cabinets and electrical panel are products to ventilate and safeguard against high temperatures. The range includes the following features (according to Type): ...
Johnson Electric offers a wide range of vacuum cleaner and industrial product blowers powered by AC, DC and EC motors. Custom engineering is offered to achieve unique application requirements of power and life, and to integrate the blower ...
Johnson Electric
Air flow: 1,250 m³/h
Practical benefits: Professional quality "made in Germany" - Original Trotec fabrication Extremely powerful radial blower- max. 1.050 Pa - optimal for ventilation over long hose distance Adjustable air flow up to max. ...
Trotec GmbH
Air flow: 400 m³/h
... turbo fans are purposed to cater to the challenges that are daily put forward on them, but also proves that they are built for long service life. The TFV 10 S can perform at several angles such as 0°, 45°, 90°, which ...
Trotec GmbH
Air flow: 10,000 m³/h
... 600 Ex the ideal conveying fan for ventilation in ex-proof zones of class 2, e.g. for tank cleaning, in docks, refineries, shafts or silos. Even with long hose distances of 50 metres with multiple arcs this powerful ...
Trotec GmbH
Air flow: 35 m³/h - 870 m³/h
häwa filter fans ensure maximum air flow and at the same time reliably filter almost all types of dust particles. The perfect aerodynamics, ease of installation and attractive design – all of this makes our häwa filter ...
Air flow: 35 m³/h - 870 m³/h
The haewa FixCool filter fan revolutionizes the cabinet climate control. The innovative air flow system, avoiding so-called hot pockets, ensures maximum protection of sensitive components. haewa FixCool filter fans ...
BAF - Fans For Extraction Arm Bomaksan branded BAF model fans are specially designed to work with extraction arms. Bomaksan BAF series fans are preferred thanks to their high suction ...
Air flow: 1,000 m³/h - 35,000 m³/h
The Extractair® is a centrifugal fan that allows the evacuation of polluted air to the workstations. Installed on the roof and connected to piping networks, it is used to: - Cleaning and air renewal; - Cooling ...
NEU-JKF
Air flow: 1,000 m³/h - 35,000 m³/h
... of hot environments, - acceleration of drying and evaporation, - extraction of vapours and steams. The Nylair® fans are axial fans covering a wide flow range (1000 to 35000 m3/h). They of course, ...
NEU-JKF
Air flow: 5,800 m³/h - 7,200 m³/h
The Projectair® fan is a mobile helical fan. Wherever moving air improves working or production conditions, it can provide a solution adapted to: - Cleaning and air renewal; - Cooling of hot locations; - ...
NEU-JKF
Air flow: 0 m³/s - 23 m³/s
Filter Fan FPI size 1 (92 x 92 mm) for climatising control cabinets and enclosures. Configuration: FPI – airflow direction: IN (standard version: blowing). Optimal climatisation of your control cabinet: the Filter ...
STEGO
Air flow: 0 m³/h - 23 m³/h
Filter Fan FPI size 1 (92 x 92 mm) for climatising control cabinets and enclosures. Configuration: FPI – airflow direction: IN (standard version: blowing). Optimal climatisation of your control cabinet: the Filter ...
STEGO
Air flow: 0 m³/h - 32 m³/h
FPO 018 and FPO 118 – Filter Fan Plus FPO for climatising control cabinets and enclosures. Direction of air flow: OUT (sucking). Five standard sizes. Optimal filter fan for control cabinets: the Filter ...
STEGO
Air flow: 0 m³/s - 198.218 m³/s
... EFFICIENCY WITH THE REVOLUTION HVLS FAN The Révolution® is Rite-Hite’s original Hiah Volume. Low Speed (HVLS) Fan and today’s standard for low cost, high-efficiency climate control, delivering the most ...
Designed for manual parcel loading and unloading CoolMan 2800 Trailer Fan swivels on unique bracketing to service two loading dock openings Easy vertical or horizontal adjustment using T-style handle for full access ...
Air flow: 0 m³/h - 1,000 m³/h
Fans are used in combination with duct on KEMPER welding smoke exhaust arms, telescopic arms and suction hoses. They are used for venting or ventilation wherever filtering the air is not important. Due to the cast silumin ...
KEMPER
Air flow: 0 m³/h - 3,000 m³/h
Fans are used in combination with duct on KEMPER welding smoke exhaust arms, telescopic arms and suction hoses. They are used for venting or ventilation wherever filtering the air is not important. Due to the cast silumin ...
KEMPER
Air flow: 2,000 m³/h - 4,000 m³/h
Central fans are the ideal solution when large amounts of air need to be moved. They are put to use in combination with duct on welding fume extraction tables, hoods and arms. Fans are used everywhere ...
KEMPER
Air flow: 32,000 m³/h
Diameter: 500 mm - 1,000 mm
... emission low in the main range of application of the fan, while having an optimal performance curve with the long and short inlet cones. Guard Serves as contact protection and for mounting the fan ...
Rosenberg Ventilatoren GmbH
Air flow: 33,000 m³/h
Diameter: 200 mm - 1,000 mm
... Casing The casings of the EC axial fans are manufactured from galvanised sheet steel with white powder plastic coating and protection guard with black powder plastic coating. Impellers The EC axial fans ...
Rosenberg Ventilatoren GmbH
Air flow: 3,000 m³/h
Diameter: 125 mm - 400 mm
... as sound insulation. The cover can be simply screwed off making the fan area easily accessible for cleaning and maintenance. The fan inside can be disassembled. Impellers The fans ...
Rosenberg Ventilatoren GmbH
Air flow: 15,000 m³/h
Rotational speed: 2,755 rpm - 2,950 rpm
Noise level: 70 dB - 94 dB
FUMEX FBE – an energy-efficient fan designed for industrial environments which can be installed both indoors and outdoors. For expelling non-explosive gases, fumes and lighter particles with an airflow of up to 15000 ...
Fumex
Air flow: 6,600 m³/h
Rotational speed: 2,890 rpm - 2,940 rpm
FUMEX FTE is a range of radial fans for use at high concentrations of dust-laden air. Fan housings and impellers are made from heavy-duty steel sheet for industrial use. The welded impeller has straight ...
Fumex
Air flow: 600 m³/h
Rotational speed: 2,800 rpm
Centrifugal fan for smaller applications FUMEX C 600 – a compact and sturdy fan which can be installed both indoors and outdoors, designed for industrial environments. The forward-curved impeller ...
Fumex
NESTRO fans are the heart of every extraction system - proven, efficient and durable. If the fan is installed on the raw gas side, it blows into the filter system and is referred to as an overpressure ...
NESTRO Lufttechnik GmbH
NESTRO transport fans transport the material to be filtered, e.g. in long pipelines or in the event of high volume flow requirements. They support/relieve the burden on the extraction fans.
NESTRO Lufttechnik GmbH
NESTRO fans are the heart of every extraction system - proven, efficient and durable. If the fan is installed on the clean gas side, it sucks air through the filter system and is referred to as a vacuum ...
NESTRO Lufttechnik GmbH
Air flow: 25 m³/h - 29 m³/h
Noise level: 33 dB
same design as the PF series filterfans snap fastener developed and patented by Pfannenberg door mounting without screws in accordance with VDE 0113 (EN 60204) simple filter mat exchange during operation with integrated foam seal ...
PFANNENBERG
Air flow: 52,000 m³/h
... CCC, EAC, CE) Motor concepts: External rotor motors: ECblue EC technology with integrated controller matched to the fan AC technology
ZIEHL-ABEGG
Air flow: 200 m³/h - 750 m³/h
Diameter: 108 mm - 200 mm
ECOFIT Single inlet centrifugal fans AC single phase motor Forward impeller galvanized steel or plastic, Impeller diameter of 108 up to 200mm, AC single phase capacitor external rotor motor 230V50/60Hz and 120V50/60Hz, Plastic, ...
ROSENBERG VENDÔME
Air flow: 400 m³/h - 1,100 m³/h
Diameter: 120 mm - 180 mm
ECOFIT Double inlet centrifugal fans AC single phase motor Forward impeller galvanized steel, Impeller diameter of 120 up to 180mm, AC single phase capacitor external rotor motor 230V50/60Hz and 120V50/60Hz, Black ...
ROSENBERG VENDÔME
Air flow: 310 m³/h - 2,700 m³/h
Diameter: 170 mm - 400 mm
ECOFIT axial fans AC single phase and three phase motor Plastic and black painted steel propeller, air direction “A” or “V”, Propeller diameter of 170 up to 400mm, AC single phase capacitor external rotor motor ...
ROSENBERG VENDÔME
You'll find Delta fans, blowers and electronic devices inside most of the world's top automotive brands. From the headlights to the interior, automotive applications include seat ventilation, HVAC blowers, air purifiers, ...
Air flow: 95 m³/min
Elektror presents ND low pressure blowers. They provide air flow of up to 95 m³/min, and total pressure difference of up to 2,200 Pa. They have a cast aluminium housing. ND blowers have forward-inclined drum impellers, which are made ...
Elektror airsystems
Air flow: 700 ft³/min
Nederman portable Fans are simple and powerful ventilation units for service, repairs and other temporary work. Ideal as an extractor for welding fumes, steam, dust or for providing fresh air during work in confined and ...
Air flow: 40 m³/h - 50 m³/h
Seifert Systems GmbH
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining