|
|
|
The FOUNDRY-MASTER COMPACT is a modern spark emission spectrometer designed for process control and routine analysis of metals and alloys. Based on the tested and approved components of the FOUNDRY-MASTER UV, the "compact" is a less complex system. The FOUNDRY-MASTER COMPACT is specially designed for non-ferrous applications and convinces by its excellent price-performance ratio.
|
|
|
With the new sample excitation system SPECTRO Plasma Generator, CCDs selected especially for emission spectrometry, a high-performance read-out system, a novel spark stand, innovative optical systems, and the unique ICAL logic system, the SPECTROMAXx provides analytical capabilities previously achieved only with conventional photomultiplier systems. The novel spark stand of the SPECTROMAXx is distinguished by minimal maintenance requirements and argon consumption that has been reduced by nearly half.
|
|
PolySpek Spectrometers are low cost, high performance desktop type spectrometers that utilize the latest in CCD detector technology.
The PolySpek utilizes a unique optical system with multiple CCD spectrometers. The result is a flexible system that can be easily expanded to meet your growing needs.
If you have limited space, the PolySpek is only 19" square and weighs only 70 lb! It can be easily shipped by UPS or Fedex without damage.
|
|
Teledyne Leeman Labs Introduces a New Tool for Trace Metals Analysis in Solid Samples – The Prodigy DC Arc
Fast trace element analyses of difficult samples are hallmarks of the DC Arc approach. Few other techniques can challenge the ease-of-use or productivity of DC Arc when it comes to samples that are difficult or impossible, to digest, like:
• Ceramics such as Metal Oxides, Carbides, Borides, Nitrides
• Refractory powders such as SiC
• Graphite
• Geological Materials
• Nuclear Materials – Uranium Oxide, Plutonium Oxide
• Soils, Sludges, Ashes
The Prodigy DC Arc will enhance materials testing capabilities for many labs by providing low detection limits and fast turn-around times for a virtually unlimited number of elements in even the most challenging sample matrices.
|
|
HORIBA Jobin Yvon provides spectrometers for the surface, depth profile and bulk analysis of both conductive and non-conductive samples with Radio Frequency Glow Discharge sources (RF-GD-OES). It is an extremely fast technique and easy to operate.
GDS is the ideal tool to investigate from the surface down to more than 150 microns with a depth resolution that can be as good as 1 nm.
Patented HDD (High Dynamic range Detection) used in the HORIBA Jobin Yvon GD instruments allows real time, automatic optimization of each detector permitting to analyze elements at trace levels in one layer and as major in a second layer without compromise on sensitivity.
|
|
|
The SPECTRO iSORT performs a 'fingerprinting' procedure to independently recognize the sample material. The optimal instrument settings for the material are then automatically used for the analysis without manual operator intervention.
|
|
The Metalscan "A" series portable spectrometers utilize a miniature CCD based optical system that allows for a small, compact unit that can be transported to the material site. "A" series can be used for a wide variety of purposes including sorting and on-site analysis/certification.
The ASSORT utilizes arc excitation, which allows quick grade identification (PMI). The ASCERT utilizes arc and spark excitation and provides laboratory-like analysis as well as quick PMI.
|
|
General description:
The Optima 7300 DV Instruments offer the ideal solution for laboratories requiring excellent performance and productivity but that don't require the degree of sensitivity and flexibility offered by a dual-view optical system. The Optima 7300 V also delivers all the functionality and reliability of the Optima family to users (such as used oils or specialty metals laboratories) who may require - or simply prefer - a vertical torch configuration.
Features/Benefits
- Improved RF transistor cooling provides better power efficiency.
- Improved cover access for easy and reliable serviceability.
- Enhanced real-time graphics and FIAS control allow transient measurements.
- The SCD detector provides fast and accurate performance.
- Exclusive high-resolution mode provides easier method development and greater accuracy
- Enhanced sample throughput and performance with simultaneous background correction.
|
|
|
The SPECTRO ARCOS can be outfitted with an interface for either axial or radial plasma observation. The new CCD optic system with a Paschen-Runge mount assembly delivers a matchless resolution of 8.5 picometer in the wavelength range from 130 to 340 nm.
|
|
|
Prodigy brings together the latest in solid-state detector technology and Leeman Labs advanced high dispersion Echelle spectrometer to provide the most power ICP available today. Not only does Prodigy provide superb resolution, stability and detection limits for reliable concentration measurements, it also provides a wide variety of optional features (e.g. chromatography interfaces, laser ablation interfaces, etc.) that are guaranteed to enhance the capabilities of your inorganic analysis lab.
|
|
|
The iCAP 6300 and iCAP 6500 are small in size yet big on performance while the advanced design guarantees excellent stability and performance. Using the latest computer aided design and software simulation packages has allowed Thermo’s engineers to develop a revolutionary new design with many unique features, reduce running costs and improve ease of operation.
|
|
|
|
|
|
Introducing the 700-ES series
Inductively Coupled Plasma-Optical Emission Spectrometers (ICP-OES)
Varian, Inc. is a recognized world leader and innovator in AAS, ICP-OES and ICP-MS, with over 50 years of comprehensive experience in analytical instrumentation. When you buy a Varian ICP-OES, you're buying more than just an instrument. You’re buying a relationship with one of the most respected and experienced instrument companies in the world.
Varian's new range of ICP-OES are designed to suit every elemental analysis need.
Varian 720/730-ES series
Both the 720-ES and 730-ES series feature a patented CCD detector that delivers the world's most flexible, best performing and fastest ICP-OES platform.
The Varian 720-ES series is completely customizable, providing scientists with the flexibility to configure the perfect solution for their specific application needs.
The 730-ES series has been specifically configured for maximum productivity, including productivity enhancing features such as a fully automated switching valve system, a
4-channel pump and mass flow nebulizer gas control.
Varian 710-ES series
The Varian 710-ES series features a solid state CCD detector,
ideal for laboratories with moderate sample loads that value
uncompromised performance. Now available new ICP Expert™ II
software (version 1.1.3), that will increase the speed of analysis by
50%
|
|
ICPE-9000
ICPE-9000 is a simultaneous ICP-OES spectrometer utilizing a vacuum type Echelle optical system in combination with a large scale CCD detector designed for stable performance over extended periods. The ICPE-9000’s innovative Mini Torch minimizes cost by reducing consumption of argon gas to half that of conventional torches.
The ICPE-9000 features easy-to-use, innovative ICPEsolution Software, which offers such features as a Method Development Assistant and a Diagnosis Assistant and easily handles automatic wavelength optimization as well as interference corrections.
|
|
ACTIVA-S: an affordable solution of simplicity in ICP-AES analysis with no compromise on quality.
Valuing the superior SMARTVIEW function to get a rapid and accurate image of the sample, through automatic and re-processable calculations.
|
|
|
The FuelPro Biofuel Metals Analyzer is specifically designed for the analysis of Biofuel. FuelPro is fully compliant with both ASTM D6751 and EN14214 for metals analysis. The system is pre-programmed with all methods and procedures to ensure a smooth start-up. All reagents and training required to get you up and running with FuelPro are included. FuelPro is provided with all operator instructions on both a video i-Pod and laminated easy to understand cards.
|
|
|
The SPECTRO GENESIS is the first and only ICP-OES spectrometer available with a complete set of factory calibrated methods for environmental and industrial applications - truly "plug & analyze" without needing to first develop a method. The methods are delivered ready for use straight out of the box with an application package that includes the sample introduction system, sample preparation instructions and method documentation.
|
|
|
|
|
|
Analyze Up To 2 Samples A Minute
Today, there are numerous requirements for the analysis of oil based materials. Some of the more frequently employed include: the measurement of wear metals in lubricating oils, the measurement of additive packages in lubricating oils and the measurement of the elemental content of edible oils. Although the specific requirements of each of these analysis are quite different, the analytical approach used is very similar.
Typically, laboratories interested in measuring the elemental constituents of edible oils have fairly conservative sample analysis requirements; perhaps only 10 to 100 samples per day. Most of these labs chose the Profile Plus Oil Analyzer for this application.
Laboratories for which the primary application is the analysis of wear metals often have extreme sample throughput demands; often in excess of 1,000 samples per day. High throughput wear metals labs typically chose one of our simultaneous oil analyzers, such as the Profile HT or Prodigy HT for this task. A system like the Profile HT is capable of analyzing in excess of 2 samples per minute.
|
|
PORTA-LIBS-2000 System
Laser Induced Breakdown Spectroscopy LIBS PDF Download
The PORTA-LIBS-2000 is the first truly portable low cost analyzer that can be used for real-time qualitative measurements of trace elements. It can be used for dedicated applications in the field or just about anywhere. Portable high resolution EPP2000 spectrometers are integrated with a high intensity pulsed laser, and sample chamber, to permit UV-VIS- NIR spectral analysis of unknown samples. The portable instrument case is just 18 x 14 x 7 inches and operates via 12 volt adapter or battery. Detection requirements determine the number of required spectrometer channels. Up to 8 high resolution spectrometers can be attached via USB-2 computer interface with 0.1 or 0.2nm resolution.
|
|
PMI-MASTER PRO is a robust portable spectrometer designed to quickly establish the composition of metals. The alloy measurement is initiated by an "easy to hold" pistol and does not require extensive training to use. The alloy grade or chemical composition appears in seconds on the integrated flat screen and can be printed with an external printer.
The Data is easily entered and the instrument controlled via a "touch screen" panel using standard windows based software package.
|
|
The TEST-MASTER PRO is a robust, mobile spectrometer for precise analysis of metallic samples.
This decisive newly developed product is optimised for sorting demands common in depot/storage facilities of steel producing and metalworking plants. In arc-mode, measuring times of less than 2 seconds are possible allowing a complete analysis of large batches in a short time.
A high frequency power source operating in argon allows the exact analysis of nearly all metals (including cast iron) on the one hand and on the other hand, rapid sorting (including carbon determination) is completed within 4 seconds. To cool the instrument heat is transferred, without any air flow, using a heat exchanger, to dissipate heat produced during normal operation. This WAS innovation, ensures that the TEST-MASTER PRO stays operative in the most challenging of environments. (i.e. automated testing systems).
|
|
|
The readout system, special optic and ICAL logic system form the basis for the superior efficiency and flexibility of the new SPECTROTEST. They simultaneously minimize operating expenses and make operation of the instrument incomparably simple and safe.
|
|
The new FOUNDRY-MASTER PRO is the first class laboratory optical emission spectrometer for complete metal analysis.
Engineered for high performance and reliability, the new FOUNDRY-MASTER PRO, with it’s innovative optical system and extended wavelength range assures precise identification and trace analysis of important elements, such as: N in steel and P in aluminium.
Proprietary detector and read-out technology, developed specifically for spectroscopy applications, out perform conventional photo tube based systems, positioning FOUNDRY-MASTER PRO as the system of choice for metal manufacturers, processors and the foundry industry.
- Wavelength range 130 nm – 800 nm covering all elements
- Precise analysis including grade determination
- Uncompromising analysis
- High long term stability and lowest limits of detection
|
|
Thermo Scientific ARL 3460 Advantage – OES metal analyzer
The ARL 3460 Advantage has been specifically configured to address the analytical requirements of foundries and metals processing companies. It is the next generation of the renowned ARL 3460 and combines cost effectiveness, high quality, performance and reliability, well proven technology and superior overall performance of PMT detectors.
As for all Thermo Scientific OES spectrometers, true calibration of the ARL 3460 Advantage is performed in the factory, ensuring excellent accuracy. It provides an immediate cost-effective and high-performance «turn-key» solution, ready to analyze cast iron, steel or aluminum samples on the installation day.
More information at www.thermo.com/oes
|
|
|
|
|
|
Q4 TASMAN - Advanced CCD Based Optical Emission Spectrometer for Metal Analysis
Q4 TASMAN - New CCD based metals analyser Q4 TASMAN is an advanced CCD based optical emission spectrometer for the metal analysis.
The new Q4 TASMAN provides the answers you need fast, using the very latest, state-of-the-art technologies. Our engineers have designed innovative solutions which make the
the Q4 TASMAN OES system fully suitable not only for your dedicated applications, but also for many general purpose applications. The result is a completely new CCD based instrument, which lets you achieve your goals faster, more reliably, and more cost-effectively than ever before with this class of instrument.
Q4 TASMAN offers dedicated solutions for your analytical tasks. The Analytical Solution Packages (ASP) are available per matrix: Elements, calibration, alloys, and more. In no time at all, you receive reliable, complete analytical results.
Q4 TASMAN´s superior analytical performance and economical run is a great asset for your metal business.
|
|
|
|
|
|
METALYS is new, fast and flexible spectrometer from HORIBA Jobin Yvon. In addition to the stability and performance of proven optics, the instrument offers low Argon consumption Spark Stand and an excitation source which is immune to power line variations.
METALYS is delivered as a turn key system fully calibrated according your needs from certified reference materials. The setting up samples necessary for the long term operation of the system are also supplied.
Product Features:
- Optimized for stability: climate control and shock resistant optics.
- Easy to use, comprehensive software features on-line monitoring of controls through the use of "traffic light" indicators.
- Integrated statistical process control (SPC) and charge correction procedures.
- Low analysis cost: typical total analysis time <10 seconds using minimum Argon consumption (3 L/min).
- Factory or on-site calibration.
- Automatic identification and correction of interferences.
- Surface analysis of conductive coatings.
- Gas analysis: Oxygen and Nitrogen.
- Patented PolyScan function.
|
|
|
With the new SPECTROLAB, SPECTRO introduces a new class of metal analyzers distinguished by improved analytical performance, greater investigative flexibility and simpler operation. Depending on the individual requirements, the analytical scope can be custom designed based on the ten standard matrices, Fe, Al, Cu, Ni, Co, Mg, Ti, Sn, Pb and Zn, or, as an alternative, from the five precious metal matrices, Au, Ag, Pt, Pd and Ru.
|
|
The V-950 is a laboratory-type spectrometer that utilizes a photomultiplier tube (PMT) based optical cell for the ultimate in analytical performance.
The system is equipped with a separate detector for each element of interest, and sensitivity of each channel can be adjusted to provide the best possible analytical results.
If you need to analyze cast iron, steel, nickel, copper, aluminum, zinc, magnesium, cobalt or titanium alloys - one sample a day or three hundred a day - the V-950 can certify the chemistry of your metals for you.
|
|
The FOUNDRY-MASTER UV is a compact emission spectrometer for process-control and the chemical analysis of metals. The original universal-concept used in the FOUNDRY-MASTER UV allows a previously unknown analytical flexibility.
The compact bench-top instrument, can determined nearly all elements in all metals. Steel and cast iron can be as precisely and quickly analysed as i.e. Al, Cu, Ni, Ti, Co, Pb, Sn, Zn, Mg. etc. The compact design does not require laboratory type conditions. This allows operation close to the production line. By using a standard Windows based GUI (Graphic user Interface); the instrument can be safely and effectively operated without the need of intensive training.
Saving, printing or exporting Data are standard functions. Thanks to the reliable vacuum-system and the intelligent standby-function; the FOUNDRY-MASTER UVis always ready for action.
|
|
|
The economics of site characterization and remediation testing are quite different from those of traditional laboratory analysis. Remediation productivity can be significantly enhanced by moving the laboratory to the samples. Teledyne Leeman Labs has developed a new ICP engineered to withstand the rigors of in-field operation, while also providing laboratory quality data. Identical in design and capability to our powerful Prodigy High Dispersion ICP, the Prodigy-Mobile Lab is built to travel to where you need real time analysis; over land or over sea.
|
|
|
|
Atomic emission spectrometers: S-OES, GD-OES, ICP-OES...
