|
|
| Products 211 to 240 of 403 |
Gasman
Intrinsically Safe Personal Gas Monitor
The new Gasman full function personal single gas monitor is compact and lightweight yet is fully ruggedised for the toughest of industrial environments. Featuring simple one button operation, it has a large easy to read display of gas concentration, and audible, visual and vibrating alarms.
* Versions available for flammable gas, oxygen and toxic gases
* Rechargeable versions for all gas types
* Non rechargeable versions for oxygen and toxic gases
* Ultra lightweight – just 80g for toxic versions
* Loud 95dBA audible alarm
* Dual colour visual alarm, red blue twin flashing LEDs
* Vibrating alarm
* IP65 and IP67 ingress protection
* Real time TWA and Peak display options
* Data and event logging as standard
|
|
The SafeLog 100 datalogging single gas monitor is designed for today’s demanding work environments.
It is rugged, lightweight, and features a large four digit display with backlighting and pulsating warning horn and visual alarms.
The SafeLog 100 is protected in an impact resistant ABS housing to take the punishments of real life work conditions.
The unit is powered by a user replaceable 9 volt battery that will supply 100 hours of continuous operation.
User flexibility is as simple as selecting from ten different interchangeable electrochemical sensors. The SafeLog 100 measures gas concentration at one sample per second. With an extended memory capacity, it datalogs 60 plus hours (continuous or multiple sessions) of 1 minute historical data.
|
|
Personal Air Monitoring Systems
3M™ Organic Vapor, Ethylene Oxide and Formaldehyde Monitors sample airborne contaminants by the simple process of diffusion. The results may then be compared to permissible exposure limits published in health and safety standards.
|
|
|
Biosystems, LLC, a Bacou-Dalloz® Company, is a leading supplier of gas detectors, respiratory maintenance equipment and monitoring systems, worldwide. Founded in 1981, Biosystems is headquartered in Middletown, Connecticut.
|
|
|
Volatile Organic Compounds (VOCs) emanate from a broad range of sources in indoor air quality, as well as industrial applications. GrayWolf's TG-502 probes offer a choice of two different Photo Ionization Detector (PID) sensors optimized for each application. Each probe also includes sensors for relative humidity, temperature and up to 3 electrochemical specific gas sensors. Coupled with the power of mobile computing, end-users can efficiently log and annotate readings, while easily accessing on-board information about specific volatiles and potential sources.
|
|
The world's most advanced, humidity resistant photoionisation detector.
PhoCheck+, independently verified to be the most sensitive, most accurate and most reproducible PID available today has redesigned handheld VOC and toxic gas detection.
PhoCheck+ is the most advanced handheld humidity resistant PID for volatile organic compounds, providing rapid response and accurate detection.
Its unique patented Fence Electrode Technology incorporates a three-electrode format enabling proven resistance to humidity and contamination, giving optimal performance in the field.
PhoCheck is a highly sensitive photoionisation detector (PID) with a dynamic detection range from 1 ppb up to 10,000 ppm, making it the only instrument on the market able to detect VOC's at low toxic thresholds and lower explosive limits.
Available in 4 different versions with varying detection capabilities and features ensuring that Ion Science has a detector to meet your specific needs.
|
|
|
The PhoCheck Tiger hand held VOC detector with revolutionary PID technology provides the best available detection and software features, all ready to use straight out of the box! The instrument provides a dynamic detection range of 1 parts per billion (ppb) to 20,000 parts per million (ppm), offering the widest measurement range available.
|
|
The Apex, for professional air sampling in all monitoring scenarios
-Extensive flow range from 5 ml to 5 L/min
-Fast 1.5 hour charge via drop in charger
-Superb battery life > 45hrs @ 2 L/min (GFA)
-Large LCD indicating real time flow & volume
-Stable, accurate digital flow control (<±3%)
-Gas Bag outlet for grab sampling
-On board data logging in Pro version
-Duration and scheduled sampling.
-Compliant to NIOSH 0600, EN1232
|
|
|
|
|
|
SIDEPAK™ PERSONAL SAMPLING PUMPS (SP730)
The 3 and 5 L/min SIDEPAK™ Personal Sampling Pumps weigh as little as 16 oz. All models offer TSI's Smart Battery Management System™ with long-running NiMH or alkaline battery packs and provides precise run time information in minutes remaining.
All SIDEPAK pumps are intrinsically safe and ideal for the sampling of aerosols, gases and vapors in hazardous environments.
Advanced personal sampling pump models feature precision volumetric flow control, continuous measurement and logging of volumetric flow rate for accurate sample volume information, fully programmable multi-mode operation and convenient internal low-flow adjustment.
Features and Benefits:
- Multiple battery options
- Precise run time in minutes remaining
- Intrinsically safe (CSA and ATEX Approval)
- Available in single-, 3- and 5-unit kits
Applications:
- Personal exposure monitoring/IH studies
- Ambient/work area monitoring
- Environmental sampling
- Epidemiology health studies
- Engineering studies
|
|
Capex L2
Contamination free pumping
The Capex L2 vacuum pump/compressor provides a clean oil free vacuum and pressure source.
|
|
MET ONE 3400 Series - Portable airborne particle counter
- Flexible communications – Wireless, Ethernet, Serial and USB
- Test wizard for easier compliance
- Seamless connectivity to data management software
With flexible communication options and open communication architecture, the MET ONE 3400 particle counter can seamlessly integrate into a central environmental monitoring system eliminating the need for any paper work.
|
|
The Model 20-600 is designed for the quantitative measurement of binary gas mixtures. This rugged, battery operated instrument is ideal for on-site gas measurement.
Typical Applications
NH3 in Air • H2 in CH4 • Freon in Air • Refrigerant 12 in Air • CO2 in N2 (flue gas) • Natural Gas in Air • Helium in Air • N2 in Argon • O2 in H2 • O2 in Air • Halon 1301 in Air • Argon in Helium • CH4 in Air • CO2 in Helium • ... and many others
- Dual Range Calibration
- Custom Designed to Your Application
- Response time < 30 seconds
- AC or Rechargeable Battery operated
- Sensitivity: can be calibrated for as low as 0.5% CO2 in Air
|
|
The DS2 Docking Station provides the ultimate flexibility for managing your gas monitors wherever you use them. The DS2 gives you all of the benefits of consistent automated calibration, record keeping, battery recharging and instrument diagnostics for your monitors to limit your liabilities and safety hazards. Two way wireless and/or ethernet connectivity enables you to link up to 100 stand-alone Instrument Docking Stations (IDSs) from remote locations anywhere in your facility and relay the data back to one central database for total instrument management. A graphical user interface tool (DSSAC) allows an administrator to view operations on each Docking Station from a network computer, making it easy to track instruments, print reports, set events and change parameters for any location.
|
|
Monoxor® III
The Monoxor III offers service technicians the easiest and most affordable way to locate CO in ambient air as well as stack gases.
Bacharach's Monoxor III is a continuous sampling instrument that quickly and accurately measures levels of CO between 0 and 2,000 ppm. In addition, the Monoxor III is supplied with a stainless steel probe and five feet of tubing to sample CO found in flue gases of residential furnaces, combustion appliances, commercial and industrial boilers.
An optional wireless IrDA printer provides a permanent record of the detected CO level.
|
|
|
|
|
|
|
The MICRO III, with its small dimensions of only 4,7 x 8,8 x 2,5 cm, is the ideal gas detector for personal protection. It weighs only 70 g, but yet offers the loudest alarm in its class (95dB). Easily placed into the shirt pocket or put on the belt you get the sixth sense for gas hazards for more than 5000 hours on a single battery (AA). The MICRO III uses the Smart-sensor technology, which means that if your detection requirement changes, the MICRO III can be easily adapted to the new measurement task by pre-calibrated, user replaceable sensors. The MICRO III is available for the following gases: oxygen, hydrogen sulfide, carbon monoxide, sulfur dioxide, nitrogen monoxide, nitrogen dioxide, chlorine, chlorine dioxide, hydrogen chloride, hydrogen cyanide, ammonia, ethylene oxide, phosphine, silan, phosgene, hydrogen and ozone. For gas sampling an optional pump, which has its own power supply, can be attached to the detector. The durablitly, ease of use, and low maintenance of the MICRO III is an investment for many years.
|
|
CO Check is the convenient, dependable way to detect and measure dangerous carbon monoxide (CO) in both residential and commercial/industrial applications.
The instrument combines superior accuracy and reliability with simple, one-hand operation. Intuitive "stoplight" LEDs and an audible alarm alert you to the danger level of CO present, while the large easy-to-read LCD provides a precise readout of the exact CO level. A protective holster case with belt clip adds to your convenience.
CO Check is a natural companion for GAS-Mate combustible gas leak detector, since both enhance heating system safety. For accurate, reliable CO detection in a convenient, affordable package that has all the features you need, CO Check is the tool for you.
|
|
Features:
- Measures ambient CO and ambient CO2.
- Datalogs up to 255 records with variable sampling time from 1-10 minutes.
- Records time and date.
- Prints to optional printer using infra-red emitter.
- User adjustable alarms for CO and CO2.
- Long life Ni Mh batteries changed in situ with charger.
- Internal pump for fast measurements in room air or ducts.
- Long sampling hose for 'silent' sampling of high profile / public areas. Complete with SGAFP probe, spare spigot, fast charger, manual and carry cas
|
|
Fyrite® Tech 50 & 60 Residential Combustion Analyzers
The Fyrite Tech Analyzers offer service technicians the easiest and most affordable way to gain the benefits of electronic-combustion testing.
It used to be that gas and oil fired residential furnaces and appliances could be adequately serviced by conducting visual tests. But with today%u2019s highly efficient equipment designed to comply with regulatory, environmental and safety concerns, "eye-balling the flame" is no longer a sufficient way to test.
Based on the winning technology platform of the Fyrite Pro Analyzers, the Fyrite Tech offers service technicians an economical means to achieve greater precision than can be obtained with visual tests. From carbon monoxide testing to oxygen and stack temperature measurement, the Fyrite Tech lets technicians instantly gather the precise measurements needed to ensure the safe, compliant, and efficient operation of residential fuel-burning appliances and furnaces.
|
|
KANE250 Combustion Meter
The KANE250 is the lowest priced combustion analyser that does not compromise on performance or features. Its unique rotary switch also makes it the simplest and quickest to use.
Features
Unique rotary switch makes it quick and easy to use
Accurately measure O2, CO and temperatire
Calculates CO2, CO/CO2 ratio and efficency
Multi-fuel, gases and oils
Detachable flue probe
Infra-red output to printer
Kit price includes printer, rechargeable batteries, charger and carry case
|
|
The Rapidox 1100 series offers fast and accurate oxygen analysis at an affordable price. The choice of oxygen sensors ensures optimum performance in a broad range of applications.
The 1000Z contains a fast and accurate zirconia sensor that is especially accurate at very low oxygen concentrations. It is fully compatible with mildly acidic gases such as CO2 and SO2.
The 1000E contains a long-life electrochemical sensor which is very suitable for use in high oxygen concentrations and can be used in a wide range of gases such as nitrogen, argon, helium, carbon dioxide and flammable gases. The 1100E is not affected by the presence of hydrocarbons.
This Rapidox 1100 series has a powerful diaphragm pump for continuous gas sampling and comes packed with features usually found only in larger and more costly devices. Windows data-logging software and programmable alarms are supplied as standard and it has a range of programmable outputs and alarms.
|
|
|
Ex-Pex Plus, the instrument for personal safety measuring CH4 in the range of 100% LEL and 100% VOL.
|
|
|
Single gas detectors for combustible gas are the economical way for measuring and monitoring flammable gases or vapors. They can be used for personal monitoring as well as for area monitoring. MSA offers the solution for your needs.
|
|
|
|
|
|
With its expertise in nuclear techniques, BTI provides innovative and reliable solutions for explosives detection. BTI is the first and only company in the world to successfully build landmine detection equipment based on thermal neutron analysis (TNA). Systems equipped with BTI’s TNA sensors have been deployed by the Canadian military for anti-tank mine applications. On-going refinements in detection algorithms and the implementation of a specially-designed, compact electronic neutron generator continue to yield dramatic performance improvements. BTI is applying TNA and similar nuclear interrogation techniques to a wide range of explosives detection applications.
A recent demonstration of the breadth of BTI capabilities was the project for the Canadian Department of National Defence involving the development of a thermal neutron analysis (TNA) sensor for the Integrated Landmine Detection System. This sensor uses a 252Cf source (an accelerator-based neutron interrogation system was also developed) to activate nitrogen in landmine explosives, and then detect the resultant high-energy gamma rays.
- Improved Landmine Detection System (ILDS) built for Canadian Department of National Defence
- First anti-tank mine detection system in the world to use TNA (thermal neutron analysis)
- 4 units built for DND (2 units currently deployed in Afghanistan with Canadian Forces)
- Next generation TNA sensor currently in development
|
|
The new EUROLYZER ST by AFRISO-EURO-INDEX is an ergonomic, light-weight flue gas analyser for checking and servicing oil- and gas-fuelled systems (optionally also for pellet systems). The extremely easy-to-handle device is already approved according to BImSchV and KÜO (TÜV By RgG 190) as well as DIN EN 50379-2. In addition, the user benefits from maximum product reliability since quality and production of the instruments are subjected to regular inspections and stringent checks by TÜV-Süd.
The intuitive user interface excels with high user-friendliness that is further supported by a colour-coded menu system.
|
|
Multi-function portable flue gas analyzer for domestic and light industrial applications. Measurement of oxygen, carbon monoxide, temperature, differential temperature, pressure, combustion efficiency and nitric oxide (optional). Optional plug in gas leak probe with flexible sensor head and integrated white LED lamp for locating leaks in pipework. Automated Room Test feature to measure build up of CO levels over time. Magnetic rubber boot to provide protection and convenience in use, plus ergonomic probe and convenient carry bag. Optional wireless printer for producing reports or wireless bluetooth connection to PDA / laptop for automated record keeping.
Voted Gas Safety Product of the Year in 2008 and with an installed base of many thousands the Sprint V is the most convenient and dependable solution for domestic and light industrial boiler engineers and installers.
|
|
|
|
|
|
KIMO proposes to discover the new analyzers of combustion: KIGAZ 210 and KIGAZ 310.
Especially conceived to answer new decrees 2009-648 and 2009-649, these apparatuses are evolutionary and flexible according to your applications:
- For the boilers gas:
Measure ambient max. CO, CO of smoke (with Qualigaz procedure integrated).
- For the boilers gas - fuel - wood:
Measure O2, output, losses, excess of air, pulling, differential pressure, room temperature, temperature of smoke, DT.
- For the measurement of pollution:
Measure Nox.
The KIGAZ lay out:
- From 2 to 3 interchangeable measuring cells to facilitate maintenance.
- Of a printer integrated with standard paper (not thermics) which makes it possible to durably preserve the documents in proof of each series of measurement.
- Of a hull of magnetized protection.
- Of a maintenance contract over 5 years including/understanding maintenance, the annual calibration, the transport costs.
- In option, of a software for the exploitation of the data.
These instruments are delivered with certificate of calibration.
|
|
|
|
|
|
The FLAMCHECK portable combustion analyser system enables simultaneous quick and accurate measurements of the various chemical parameters bound to combustion with regard to industrial installations such as: Refineries; Steel industries; Power plants…
The gas sample is taken up through a probe and passed through a condensate trap and a solid particle filter, thereby avoiding any trace of humidity and dust.
The clean & dry sample is then directed to three electrochemical sensors allowing simultaneous measurement of the Oxygen (O2), the Nitrogen Monoxide (NO) and the Carbon Monoxide (CO) concentrations.
Advantages:
• Robust industrial design for daily use in harsh environments.
• High reliability of the measurements thanks to its automatic zero calibration (the time period between calibrations can be programmed).
• Automatic Condensate Recovery and draining
Enables optimum protection of the measuring cells.
• Automatic Protection of the measuring cells when highly concentrated or unusually high temperature samples are present.
• Data display on a large and interactive backlit screen for a user-friendly and simultaneous display of all parameters.
|
|
Measuring parameters:
O2, CO / H2, (NO, SO2 and / or CO-high optional), waste gas temperature, ambient temperature, draft or balance pressure.
NOTE: NO2 measurements are not possible.
Computed values:
CO2, CO non-diluted, Lambda, pressure and temperature difference, degree of efficiency (Eta), waste gas losses (qA), NOx, dew point, and Eta combustion value
This lightweight design incorporates many features including:
Powerful storage battery; approximately 30 hours of operation with activated display illumination
Illuminated display showing four simultaneous measuring values in a selectable display combination
Optional upgrades for up to five measuring cells: O2, CO / H2, CO-high, NO, SO2
Integrated printer for plain paper - measuring data can be printed immediately
|
|
LAND has a range of portable gas analysers for testing, checking and monitoring combustion processes for operating efficiency; and analyzing pollutant gas emissions for environmental compliance.
The range comprises lightweight, simple-to-use portable gas analysers with facilities aimed at a wide range of applications. Up to 9 gas measurement are available on a single analyser. There are a wide range of options available, including a data acquisition system - plus the ability to self-configure the analyzer to exactly meet plant and process requirements.
|
|
Features
- Easy to use rotary switch
- Protective rubber sleeve with magnet for “hands free” use
- Multi-fuel: Natural Gas, Propane, Butane, LPG, Light Oils (28/35 sec)
- High accuracy manometer
- Differential thermometer
- “Send” button for instant printout and logging
- Separate reports for: Combustion Pressure Let-by and Tightness Temperature CO build up
- Battery life typically 12+ hours
- Designed to meet BS7927, BS7967 and EN50379
- 5 year extended warranty if serviced annually by KANE
|
|
|
|
Gas analyzers, Portable gas detectors 
