|
|
Measuring Device for Dust Concentration D-R 300-40
Features
In-situ measurement directly in the flue gas flow
Automatic system tests and correction of measured values
Self-calibration in 4-h cycle
Optics and electronics in a hermetically sealed unit - no smoke gas can enter device
Maintenance-friendly, thanks to optimal purge air conduction in front of the heated optical end plates
Direct access to all parameters via the operator display
Automatic measuring range selection in accordance with 17. BImSchV. in relation 1:3:9.
Applications
Fine dust measurements in processes
Waste incineration
Filter monitoring and emission-value measuring in waste incineration and power plants
|
|
The Kanomax Dust Monitor 3442 is a compact and high quality instrument ensures highly accurate dust measurements via a user-friendly & intuitive interface.
Applications include office, school, hospital, manufacturing,laboratory, and other applications where measurement of contaminants is required. It measures particle concentration of PM 10.
|
|
|
|
|
|
testo 330-1 LL flue gas analyzer with long-life gas sensors, rechargeable battery and calibration protocol included
In the testo 330-1 LL, the follow-on costs for the user are greatly reduced by the extended sensor life of up to 6 years for O2 and CO. At least one sensor replacement is avoided during the typical duration of use of the instrument. In addition to this, Testo gives a warranty of 4 years on the complete instrument (testo 330-1 LL incl. O2 and CO sensors as well as probe). The great adavantage of the flue gas analyzer is its capability for dialogue. At the press of a button, the instrument diagnosis provides information on qualitiative status, e.g. the filling level of the condensate trap, or of wearing parts such as the status of the gas sensors. Maintenance intervals are displayed. The modular probes, such as those for differential temperature and pressure as well as for flue gas, are automatically recognized by the measuring instrument. The measurement results thus immediately appear in the menu.
|
|
testo 335 flue gas analyzer, rechargeable battery and calibration protocol included, equipped with O2 sensor
testo 335 is the new generation flue gas analyser, specially tailored to industrial applications' requirements. testo 335 can be used for all emission monitoring applications by the operators of industrial furnaces such as processing and power plants, by service technicians for burner/furnace manufacturers, for plant construction as well as for stationary motors. Even spot measurements for up to 2 hours are possible.
|
|
|
testo 350 XL analyzer box, equipped with O2, CO (with switch-off and rinse function), NO, NO2, differential pressure measurement, 2 temperature probe sockets, gas preparation, Testo data bus adapter, automatic fresh air rinse with valve (including measurement range extension with dilution factor 5 for all sensors), built-in rechargeable battery, data memory, can be upgraded to max. 6 gas sensors (with H2S, HC, SO2, CO2 NDIR)
|
|
Designed for measuring simultaneously up to three gases with NDIR technology with correlation cells. Typical gases are CO, NO, CO2, CH4, SO2, etc. No regular service needed, it executes automatically zero autocal with ambient air. This analyzer is equipped with 4 analogical output (4-20 ma) and 2 serials (mod-Bus RTU/ASCI), double threshold contact alarm for every measurement, fault and service. A special version with a long optical path allows the measure of extremely low amounts.
4 optional analogical input 4-20 ma and 6 digital input make it the perfect controller for every analysis system (CEMS). European certification in progress.
Hart protocol available as option.
|
|
Extractive process gas analysis is characterized by the fact that a sample is extracted from the process line and conveyed to the analyzer. Typically, the sample is extracted by a probe, then transported through a sample line and conditioned before being processed to the analyzer.
Siemens has integrated numerous extractive analytical methods in the series 6 analyzers family with a modular and consistent housing and operating concept. Each of the analyzers is thereby a class of its own:
IR-active components: ULTRAMAT 6 and ULTRAMAT 23
IR-active components and Oxygen
Oxygen: OXYMAT 6 and OXYMAT 61 and OXYMAT 64
Hydrocarbons (total content measurement): FIDAMAT 6
Hydrogen and noble gases: CALOMAT 6 and CALOMAT 62
|
|
|
HazardWatch is a modular Fire and Gas Detection System built using state-of-the-art industrial automation/control equipment to perform the requirements of an integrated Fire and Gas Detection System certified by Factory Mutual to be compliant to NFPA 72 (2002).
|
|
Secure field bus for Fire & Gas system solution
WITHOUT COMMUN FAILURE MODE
Since 1948, SIMTRONICS has specialised in high technology products for the analysis and detection of gas. Today, the Syntel System and its new line of remote sensors come at the leading edge of technologic innovation (30 registered patents) to guarantee a safe and efficient secured system :
• Very high safety level, SIL 2
• Distributed intelligence protocol where each sensor interacts with output modules,
• Safety ring topology with a single cable brings reduced costs,
• Open system,
• Integration and control of digital and analog signals,
• MODBUS / LonWorks gateway enabling connection with supervision systems, SCADA, PLC,
• Flexible configuration using its own dedicated configuration tool,
• Easy-to-use exploitation system.
|
|
ADEV plans and produces probes for the analysis of oxygen to employ in the various industrial fields with problematic different applicative.
The range, based on sensors to zirconium oxide differs for temperature of employment, onerous length of immersion, background, applications and applications to low cost.
It is placed side by side to the extractive models, or to zirconium oxide that paramagnetic or electrochemical and allows the analysis of oxygen in the better solution, beginning from fractions than ppm in volume to 100%.
|
|
In order to permit the measurement and the continuous control of smokes generated by the combustion of natural gas, fuel oil, coal or garbage, Fuji Electric has developed a complete line of gas analysers allowing to adapt all industrial facilities to the standards and regulations limiting the disposals of pollutants in the atmosphere.
|
|
SERVOTOUGH Fluegas (2700) Combustion Gas Analyser
The SERVOTOUGH Fluegas measures oxygen and combustibles in flue gases to allow improved combustion efficiency and reduced emissions. The Fluegas gas analyser is designed to suit the most demanding needs of combustion efficiency applications in the Power Generation and Process Industries.
- Continuous measurement of Oxygen and / or combustibles
- Simple to operate and install
- Fully field maintainable
- High sensitivity sensor: ranges 0-500ppm to 0-2000ppm
- High range sensor: ranges 0-1500ppm to 6000ppm*
- Suitable for high temperature operation up to 1750°C (3182°F)
- *ranges up to 1 or 2% in certain applications
|
|
LAND has a range of dust, smoke and particulates monitors which are the most advanced available, using patented measurement technology to give high accuracy.
The analysers (which comprise a transmitter and a reflector) are mounted across the stack, the optical measurement technique uses no moving parts, giving the highest possible reliability with very low maintenance.
|
|
|
AMETEK Thermox offers three styles of direct-mount flue gas oxygen analyzer - all are easily serviced without removing the analyzer from the flange. Insitu – average response, to 1250°F (677°C). Convective – average response, to 2600°F (1537°C). Close-coupled extractive – very fast response to 3200°F (1760°C).
|
|
|
New analyzer who has the absolutely new characteristic of direct in situ oxygen measuring in processes with various and variable temperatures. The probe, realized in ceramics, can be used in every type of process. The special cell heater is not be damaged also with high temperatures of the process.
|
|
The XZR-500 sensor is an oxygen sensor which has been determines the amount of excess air required for optimum combustion. It uses advanced Zirconium Oxide technology to measure the levels of oxygen in extremely harsh conditions such as boilers, furnaces and incinerators.
When combined with the XCU-500 analyzer it produces fast and accurate readings from the harshest conditions.
|
|
A complete range of flue gas oxygen analysers for all applications
Genesis is a range of flue gas oxygen analysers developed specifically for combustion analysis and control applications. Unrivalled flexibility and ease-of-use enables the Genesis oxygen analyser systems range to meet all process requirements.
The range of Oxygen Analysers for General Purpose Applications includes in-situ measurement probes for a wide range of flue gas temperatures (0 - 1250 °C / 32 - 2282 °F), local and remote control units, and an automatic calibration unit.
The 'stand-alone system' is the world's first truly, This oxygen analyser also carries TÜV approval.
|
|
|
Reliable measurement of ppm combustibles (CO + H2) or carbon monoxide (CO) together with oxygen, allows the user to determine and maintain the optimal O2 set point for the process. This results in improved product throughput, increased safety, longer equipment life, lower emissions and maximized fuel efficiency.
|
|
The analyser ARELCO ARC model 2008 IR MP-R is a compact and reliable instrument for specific measurement of CO2 or CO or CH4 in gas blending. The instrument is based on non dispersion infra red method (NDIR)
The touch sensitive display allow the user to see very quickly all parameters: gas contents, analogue output range, alarms status… and to get access to the menus.
The 2008 IR MP-R model is 19” rack type and integrates some data storing facilities, automatic calibration function. All data are available on digital interface RS232.
The IR technology requires a dry gas. The instrument could be couple to a gas dryer and speciel filter especially for measurement on flue gases.
|
|
The PowerMon Ionometer is a versatile applicable on-line measuring instrument, which is used for the monitoring of the legally prescribed limit value in the outlet of municipal and industrial purification plants.
Advantages:
-precise results
-connection of up to 100 external,
physical measuring sensors
-fully automatic operation
-easy, comfortable operation
-fast data transfer
-self-monitoring system
-remote maintenance and
network ability
-graphic user interface with interactive
Touch Screen operation
-update of the operating software or
download of data by USB stick
-minimum operating cost by small
reagent consumption
-second measuring point
without surcharge
-operation also possible
without housing
|
|
The Monitor 90 Ecometers are used to measure gaseous inorganic chorine, fluorine or ammonium compounds.
They are ideal for process monitoring and emission control, and comply
to the requirements of the German emission control regulations
(BImSchV) - among the strictest in the world. The high system availability makes the Ecometer an ideal component of automatic control systems for emission control installations.
Advantages:
-Minimal reagent consumption
for low operating costs
-Low maintenance, with selfchecking and automatic recalibration
-Automatic correction for
sample pressure and temperature
-Low sensitivity to interference,
below statutory requirements
-High stability, with low standard deviation and drift
-Industry standard interfaces and outputs
|
|
These analyzers and sensor assemblies are suitable for measuring fluoride concentration typically found in drinking water applications and are a simple, cost-effective solution for ensuring regulatory compliance in fluoridated drinking water.
Benefits:
- Low price
- Low maintenance
- No chemical additions
|
|
ANTEK's 9000F offers a cost-effective alternative to the common Wickbold method (oxy-hydrogen torch) of analysis, providing total fluoride determinations on gas, liquid, and solid samples safely within minutes instead of hours. It is far less expensive than ICP/MS; and, unlike other methods, the ANTEK 9000F is specific for fluoride without interference from other halides. The safe, non-hazardous ion specific detection method provides an analytical range from sub-ppm to percent levels.
Features & Benefits
- Specific for fluoride
- Sensitivity from sub-ppm to % levels
- Results in 5 to 15 minutes
- Non-hazardous operation
- Gas, LPG, liquid, and solid samples
|
|
|
In applications such as ceramics glazing, reducing zones of incinerators, annealing furnaces, and other surface treating processes for metals, it is often necessary to control to a specific oxidizing or reducing condition. These analyzers can measure sub-stoichiometric furnace atmospheres accurately and reliably thereby helping to maintain a consistent product quality.
|
|
Analysis Cabinet, Multigas, Turn On Key
Description :
- Study, Designe and Production of an analysis system where are integrated several kinds of analyzers (ARELCO or other), and a sampling system (manual or automatic).
- Exemple : Gas Analysis in furnace atmosphere for heat treatment application (Steel Industry, Glass Industry).
ARELCO offers global solution for gas analysis in galvanizing line, annealing line, reheating furnace (CGL, CAL, ...).
Measured Gas in this application : O2, H2, dewpoint
|
|
FTIR Laboratory Spectrometer
Step up to the new MB3000 FTIR spectrometer from ABB.
It is the most reliable FTIR system in the market with the lowest cost of ownership. Combined with the intuitive Horizon MBTM FTIR software, the MB3000 will facilitate acquisition, processing and analysis of samples.
Easy to use and maintenance free, it will provide constant analysis results for years to come. The MB3000 offers ease of use, reliability and constant results in order to address the concerns of lab users.
|
|
Features:
- A modular industrial spectrometer designed for versatile external sample interfacing
- A selection of optimized gas cells
- Powerful AutoQuant Pro software
- High quality spectral reference libraries
- Assistance with method development, (including EPA and SEMATEC protocols)
|
|
Conditioning Systems
Every kind of gas analysis, either fairly straight forward single component analysis or complex multi component process gas analysis require application specific sample gas conditioning systems. These systems must deliver continuously reliable process data even under varying ambient and/ or process conditions.
It is quite obvious, that stack testing has other requirements than engine emission testing, EPA methods testing or process applications in the food industry just to name a few.
Bühler delivers modular designed prefabricated systems as mobile or stationary stand alone or 19” rack mount solutions and assists in planning application specific gas analysis systems on panels, in cubicles or analyser shelter.
Sample Gas Conditioning System SCS 19
Complete system for 19" rack
One or two gas streams
Modular design
Probe and cal gas controller
|
|
This units provide completely pre-installed sample gas conditioning for continuous use and can excellently be integrated into gas analysis systems. Its compact construction means that it takes up only little space.The units are ready for use within a few minutes.This, at last, makes the usual time-consuming procurement of individual components and assembly superfluous. Examples of applications for sample gas conditioning units: flue gas and process gas conditioning.
The units are also available as portable systems.
|
|
|
|
Gas analyzers, Portable gas detectors 
