|
|
| Products 91 to 120 of 232 |
Since 1957, the Myron L Company has designed and manufactured highly reliable analytical instruments for a wide variety of applications. Thousands of professionals around the world rely every day on the performance of our instruments. Demanding uses range from boiler water testing to ultrapure water control to medical instruments for artificial kidney machines.
We are proud of the trust our handheld instruments and monitor/controllers have earned in the past. Our product line has evolved to a new level of outstanding performance and value in analytical instruments: the Ultrameter II series. While priced like affordable single-parameter instruments, the Ultrameter II does the job of three, four or even six instruments.
|
|
|
|
|
|
Analyzer/station of alarm AQUAPOD SPE
The analyzer/station of alarm AQUAPOD SPE detects and analyzes on line the micropollutions of water.
Thanks to patented technology SPE Box and analysis UV (+ Fluoresence in option) AQUAPOD SPE allows levels of detection lower than the µg/L (ex: 0,06 µg/L in the case of pesticides).
Its just evolutionary database:
- the pesticides (Triazines, derived Diuron, Isoproturon, organophosphates, pyrethrinoid, Ethyl parathion, amides...)
- hydrocarbons (SP 95, SP98, Kerozene, gas oil, oils,...)
- industrial products (Phenols: Chlorophenols, Nitrophenols...)
- complex mixtures (rejections of STEP, liquid manures...)
Aquapod SPE detects also any anomaly of spectrum UV of the eaaux one. Associated with an integrated automatic sampler, it makes it possible to identify new sources of pollution or évévenement
Applications:
- Drinking water: Collectings - Raw waters - treated Water
- Natural Water: Rivers - underground - stoppings
- Cleansing: Rejections of purification plants
- Industry: Water of process
|
|
the AQUAPOD the AQUAPOD LIGHT detects and analyzes a broad range of parameters and pollution in drinking water, water natural, industrial wastes and sea water:
NITRATES
DBO
DCO
COT
MY
UV 254 NM
GENERAL ANOMALIES OF WATER
COLORIMETRY
HYDROCARBONS
URBAN REJECTIONS
COMPLEX INDUSTRIAL PRODUCTS
SPECIFIC PRODUCTS
The AQUAPOD LIGHT integrates an analysis UV and fluorescence (in option) making it possible to reach thresholds of sensitivities about the ppm and Pb
Easy to install, without reagents nor calibration, the AQUAPOD Light ensures you a cost of very low exploitation.
The AQUAPOD LIGHT can accept any type of physico-chemical sensors Modbus RS485, 4 - 20 my...
Moreover, thanks to its exits Modbus, Profibus and Can Open, the AQUAPOD LIGHT can be interfaced quickly towards any system of supervision or communication GPRS or STN
|
|
multiparameter sensor MPS-D8
13 parameters can be measured: water level, °C, conductivity, salinity, O2, pH, ORP, NH3, NO3-, Cl-, NH4+, Na+, Ca2+, F-, K+ and turbidity. For use with data logger MDS-5.
|
|
The PowerMon Kolorimeter is a versatile applicable on-line measuring
instrument. It guarantees a permanent optimal water quality by the
continuous supervision of the legally prescribed limit value for total phosphate and ortho-phosphate in the outlet of municipal and industrial purification plants.
Advantages:
-precise results
-connection of up to 100 external,
-physical measuring sensors
-fully automatic operation
-easy, comfortable operation
-fast data transfer
-self-monitoring system
-remote maintenance and
network ability
-graphic user interface with interactive Touch Screen operation
-update of the operating software or
download of data by USB stick
-minimum operating cost by small reagent consumption
-second measuring point without surcharge
-operation also possible without housing
|
|
|
|
|
|
Leakwise Oil on Water Monitor
Leakwise Oil on Water MonitorLeakwise Oil-on-Water Monitoring and Detection Systems from GE Analytical Instruments provide early, reliable, low maintenance warning of hydrocarbon leaks and spills 24/7 without false alarms. A Leakwise system consists of a wire or wireless signal processor and one of more sensors, depending on the application.
Leakwise oil detection sensors use high frequency electromagnetic energy absorption floating sensors, which enable reliable monitoring of hydrocarbon on water regardless of dirt or oil coating of the sensor or change in water level or water salinity. Advantages include:
%u2022 Provides reliable coverage 24/7 with no false alarms
%u2022 Operates virtually maintenance free for years
%u2022 Detects oil layer thickness (as little as 0.3 mm)
%u2022 Offers an affordable solution for oil leak detection
Applications include oil leak monitoring at refineries, petrochemical plants, pipelines, gas stations, power plants, underground transmission, remote substations, transformer switchyards, marine ports, airports, steel and aluminum manufacturing plants, offshore rigs, groundwater and stormwater runoff, wastewater treatment plants and more.
Leakwise is also an ideal tool for strengthening Spill Prevention Control and Countermeasure (SPCC) plans, as required by the USEPA.
|
|
|
|
|
|
Model 6600 Oil-in-Water Analyzer System
Teledyne's Model 660/661 was the industry standard in oil-in-water analysis for 30 years. The microprocessor based 6600 / 6610 improves upon our proven analog circuitry and the sample handling system. The new, compact modern design incorporates many new features at a significantly reduced cost. Critical features include:
Folded optical system optimized for excellent signal-to-noise ratio and stability
Increased reliability by eliminating many moving parts
New sonicator homogenizes oil (in-line) in water instantly (less than one second)
Improved auto-zero filter system prepares zero fluid for calibration and zeroing without long sparging cycle
Specially developed software with auto calibration features
Automatic self-cleaning sample cell suitable for high pressure and temperature
Manual calibrations done easily with collected zero fluid from sample system using the gravity fed reservoir
Manual or automatic span sensitivity easily checked with internal span flag once field calibrated
Faster response time
Modular design configured to meet specific application requirements
|
|
|
Oil content analyzer for water or soil applications. This 5 minute test provides an accurate analysis using Horiba's S-316 extraction solvent.
|
|
The instrument provides on-line monitoring of active chlorine or total free chlorine in drinking water plants, drinking water distribution networks, and in cooling water.
-Low detection limit for efficient residual chlorine monitoring
-Measuring range of 0 - 5 mg/L of HOCl or free chlorine
-Two analog outputs
-Automatic temperature compensation
|
|
CHLORINE RESIDUAL ANALYZER
The CRA 3500 Chlorine Residual Analyzer is the first polarographic CRA to offer automatic calibration. Cleverly engineered and using state of the art electronics the CRA 3500 is able to save customers considerable sums of money by auto- calibrating at user defined time intervals.
BENEFITS
- Automatic Calibration
- Low Purchase Cost
- Low Cost of Ownership
- Reduced pH Dependency
- SMS Text Alarms
- Webserver*
- Bluetooth
- 4-20mA and Relay Outputs
- Carbon Dioxide or Acid Buffer if Required
- Can Operate for Three Months without Operator Intervention
|
|
General description:
Free residual chlorine analyzer type M 1032 C is designed for measurement and control in drinking water, waste water treatment and swimming-pools applications.
The unit consists of two electrodes (gold and copper - measurement electrodes) measurement cell with mechanical cleaning and microprocessor controlled unit with graphic display. With clear measured signal control unit evaluates and amplifies cell current and with an automatic temperature compensation we have an accurate measured signal on the output and on the graphical display shown in mg/l.
Control unit is equipped with galvanically separated 4-20 mA signal on the amplifier output.
User can easily communicate with control unit over graphic display and four keys.
|
|
Measuring and control instrument for free chlorine
- Easy and safe operation by plain text menu guidance
- Safety by password function
description
The K 100 (W) CL2 is a sophisticated single-channel instrument for measuring and control free chlorine. Additionaly temperature measurement of the measuring media is possible. The instrument is available in a panel mounted housing (K100 CL2) and in a wall mounted housing (K 100 W CL2).
|
|
* 0 to 5 mg/L range, dual, fully-adjustable set-point alarms
* IP62 enclosure rating, suitable for indoor installation
* Automatic, self-testing diagnostics
* Minimal routine maintenance required
* Colorimetric DPD chemistry - fast, reliable, economical
* Unattended operation up to 30 days
* Manual or automatic feed pump control
|
|
Online Monitoring System for Oil and Hydraulic Fluid
OLMS 4
- 3-channel digital online monitoring system with built-in pump
- LED-Display for triple ISO codes
- According to ISO 4406:1999 4µm(c), 6µm(c), 14µm(c) based on ISO 11171:1999 calibration and
- According to ISO 4406:1987 (2µm), 5µm, 15µm based on ISO 4402 calibration
- Pressureless sampling as well as pressurized sampling from 7 bar up to 420 bar (6000 psi)
- Flowrate: 25ml/min
- Pressurized sampling up to 350 cSt
- Minimess M16x2 and standard connectors (DIN ISO 2353) or user specific
- Operates on 90 - 230 V AC (50/60 Hz), 12 - 30 V DC
- Optional 4-20mA output
- Optional Alarm-Relay output
|
|
The SOLA II (Sulfur OnLine Analysis) instrument measures total sulfur in liquid hydrocarbon fuel and gaseous process streams. The SOLA II addresses the need for a low maintenance sulfur analyzer that can reliably measure low ppm levels to help customers meet the tightening regulatory requirements limiting sulfur levels in fuels.
The SOLA II analyzer uses the low-maintenance Pulsed UV Fluorescence (PUVF) detector with the proven Pyrolysis system for measuring total sulfur in gasoline, diesel, kerosene, and jet fuel. The PyrolyzerTM performs the conversions for total sulfur measurement without requiring a source of pure oxygen. A field-proven valve injection system includes hardware and software for precise control of sample introduction.
Full scale measurement ranges are from 0 - 5 ppm/wt to 0 - 9000 ppm/wt detection limits as low as 0.25 ppm. Automatic stream switching is also available for dual-stream applications.
|
|
|
|
|
|
Sievers 500 RL On-Line
GE Analytical Instruments’ new Sievers 500 RL On-Line TOC Analyzer delivers the accuracy, automation, and confidence needed to transition from laboratory to on-line TOC for enhanced operating efficiencies and science-based risk management. Using the proven Sievers laboratory TOC measurement technology, the Sievers 500 RL provides continuous quality assurance for on-line pharmaceutical water release, cleaning validation, and Process Analytical Technology (PAT) quality initiatives.
The Sievers 500 RL On-Line TOC Analyzer uses no reagents and features the revolutionary four-port Super iOS standards introduction device that fully automates system protocols, and transfers critical standards information directly to the Analyzer for secure data management, significantly reducing costs and risks.
The 500 RL Analyzer shares many productivity and ease-of-use features of other Sievers TOC Analyzers, including 12-month calibration stability, a color touch-screen display, USB port, and minimal maintenance (a few hours per year). With a wide operating range of 0.03 ppb to 2,500 ppb, the 500 RL also measures USP conductivity.
|
|
TOC is used in a variety of applications from management of waste water treatment plant influent and effluent, to drinking water supply management and monitoring of impurities in process and natural waters. And the range of applications in which this type of on-line technology is used is expected to continue expanding.
In addition, because nitrogen is considered to be one of the factors which contributes to the over-proliferation of organisms in enclosed bodies of water, management of these public water sources and of treatment plant influent and effluent also includes demand for monitoring of nitrogen levels.
|
|
the AQUAPOD the AQUAPOD LIGHT detects and analyzes a broad range of parameter and pollution of drinking water, natural water, industrial wastes, sea water:
NITRATES
DBO
DCO
COT
MY
UV 254 NM
GENERAL ANOMALIES OF WATER
COLORIMETRY
HYDROCARBONS
URBAN REJECTIONS
COMPLEX INDUSTRIAL PRODUCTS
SPECIFIC PRODUCTS
The AQUAPOD LIGHT integrates an analysis UV as well as a detection of fluorescence (in option) making it possible to reach thresholds of seusibilities about the ppm (for the majority of the parameter to the µg/L (hydrocarbons)
Easy to install, without reagents nor calibration, the AQUAPOD Light 2000 ensures you a cost of very low exploitation.
The AQUAPOD LIGHT UV FLUO can accept any type of physico-chemical sensors Modbus RS485, 4 - 20 my...
Moreover, thanks to its exits Modbus, Profibus and Can Open, the AQUAPOD LIGHT can be interfaced quickly towards any system of supervision or communication GPRS or STN
|
|
BioTector - TOC ONLINE ANALYZER
TOC, COD, BOD, TC, TIC, VOC - The oxidation process that totally self-cleans
PRODUCT OVERVIEW
• Self-cleaning technology
• Uptime - Typically 99.7%
• Results < 6.5 minutes
• Multi-range
• Single and multi-stream option
• Nitrate & phosphate analysis modules available
General Information
Designed to withstand corrosive environments, the BioTector TOC Analyzer is housed in an FRP enclosure with dual compartments to keep all electronic components separate from the “wet” or analysis section. The BioTector TOC Analyzer has an in-built microcontroller and is operated through a membrane keypad. An SD Falsh Card allows easy software & configuration updates and may be used to download the 5,000 event archive.
|
|
|
|
|
|
The oxidation stability of biodiesel can easily be determined with the 873 Biodiesel Rancimat from Metrohm, a modern and reliable instrument with a 3 years’ warranty. In addition to reliable hardware and easy operation, it offers all the comfort to be expected from a PC-controlled instrument.
The method: oxidation stability according to EN 14112
The determination of the oxidation stability according to EN 14112 is an accelerated oxidation test. The sample is held in a sealed reaction tube at a constant temperature of 110 °C while a continuous flow of air is passed through the sample. The fatty acid methyl esters (FAME) in the sample are oxidized to peroxides as the primarily oxidation products. After some time, the fatty acids are completely decomposed into the secondary oxidation products. In addition to volatile organic compounds, these are low-molecular organic acids, mainly formic and acetic acids. An air flow transports them to a measuring vessel containing distilled water as the absorption solution.
|
|
|
|
|
|
Portable Particle Counting System for Oil and Hydraulic Fluid
PAMAS S40
- 8 channel high resolution digital system for analysis
- According to ISO 4406:1999 4µm(c), 6µm(c), 14µm(c) based on ISO 11171:1999 calibration
- According to ISO 4406:1987 (2µm), 5µm, 15µm based on ISO 4402 calibration
- Pressureless sampling as well as pressurized up to 420 bar (6000 psi)
- User friendly operation using touch screen with graphic display
- Compatible with ISO 4406:1999, SAE AS 4059D, ISO 4406:1987, NAS 1638
- Real portability with lab system accuracy
- User can configure the system to their needs in profiles
- Pressurized sensor avoids degassing
- Display and printout provide triple ISO codes, NAS- and SAE cleanliness classes, measurement volumes and particle numbers
- Highest repeatability and accuracy
- Password protected user levels
- Storage of more than 500 measurement data sets
- Built in battery for data backup
- Viscosity independent up to 200 cSt
- Pressurized sampling up to 350 cSt
- Minimess M16x2 and standard connectors (DIN ISO 2353) or user specific
- Operates on 90 - 230 V AC (50/60 Hz), 12 - 30 V DC or internal battery
|
|
Parker's IQ200 particle counter is specifically designed to provide continuous, on-line monitoring of the particulate contamination level of hydraulic and lubrication fluids. This compact, affordable particle counter can connect to virtually any system to give the user real-time data at the specified interval. Other features include:
• Remote and multiple system monitoring from one location
• Completely automatic
• Laser accuracy and repeatability
• Programmable test intervals from 3 seconds to 24 hours
• Adjustable contamination level alarms
• Integral flow and calibration check
• ISO 4406-1999 reporting format (4, 6, 14 micron) and correlation to NAS 1638
• User friendly Windows-based software
• Data displayed instantly in chronological or graphic form
|
|
|
|
|
|
· Rugged portable unit for quick and simple particle
analysis on site
· Simple menu-driven operation
· Laser sensor with 12 channels for exact and reproducible
results
· Possibility of suction and pressure side operation
· Integrated suction pump with new system. Flow
regulation independent from viscosity and pressure
· Prior to each measurement automatic flushing of
the gauge head
· Adjustable measuring mode (single and cyclic
measurements
· Long term measurements up to 330 hours
· Memory bank for 1400 measurement values (up to
99 series).
· Calibration according to ISO 11171:1999 (NIST)
· Analysis according to ISO 4406:1999
Analysis according to ISO 4406:1987
Class 1 up to 24
· Analysis according to NAS 1638
Class 0 up to 12
· Measuring range ISO 4402: 2 - 100 µm
Measuring range ISO 11171: 4 - 50 µm
· Indication of the absolute numbers of particles in all
channels
· Serial interface for further data processing via PC
· Integrated printer
· Threshold function contact for preset min. and
max. classes
|
|
Precision optics and advanced electronics make Chemtrac Particle Counters perform with unparalleled accuracy. Chemtrac's patented sensor flow cell is externally mounted to eliminate any possibility of water damage to counter electronics. A constant head, flow controller with low flow alarm provides a simple, reliable, sample system. The PC 2400 D communicates digitally using a nonproprietary serial interface which emulates the Optomux Opto 22 protocol. Ninety six (96) counters can be multi-dropped on a single RS485 serial communications loop up to 4,000 feet
BENEFITS
- Optimize Crypto and Giardia removal
- Provides Particle Size & Quantity Information
- Immediate Response To Process Changes
- Maintain High Quality Finished Water
- Optimize Filter Backwash
- Improve Filter Performance
- External Sensor Simplifies Sensor Maintenance
- Network or Stand-alone Operation
|
|
General description:
Portable system for the measurement of particle number and size in liquids and super-viscose media. The available sensors include a measuring range of less than 1 µm - 150 µm. It is possible to measure directly at pressure pipes up to 10 bar (optional 315 bar). Results are shown immediately on the LCD screen. For additional data processing there is also the Log and Show 3.1 (water) or 3.2 (Oil) evaluation software available.
The protocol printer integrated in the device provides printout of measuring sequences and sensor response lines.
The measuring system is available in either the oil or water version.
Optional DPS-1 pump system: self-priming pump for measuring volumes of more than 10 ml.
|
|
|
|
|
|
Icount PD
A new generation of detectors of particles on which industry can "count"
Technical description:
Technology of luminous screening per laser diode recognized by industry
Approved calibration, methods on line
Indicators LED for levels detected ISO & NAS
Technology entirely PC compatible /PLC
Simple connection by catches of M16 test or with an interface by sensors STI on line.
Advantages:
The most modern technology in the field of the analysis of the contamination by solid particles
Trace program of preventive maintenance
Analyzes on site combined with the laser technology
Simple communication protocols for the configuration of use and exploitation
Ecological nylon material reinforced with glass fiber
Accreditation IP66
Economic solution.
Applications:
Mobile sylviculture
Industrial facilities, paper Paper & pulp - Steel-works - energy Conversion
Transformation of alternative energy - Systems of transmission for wind mills
Installations of military support on the ground - testing grounds & quality control.
|
|
|
|
|
|
Icount Particle Detector
The Icount Particle Detector from Parker represents the most up-to-date technology in solid particle detection. The design dynamics, attention to detail, and small size of the permanently mounted, on-line particle detector brings a truly innovative product to all industry. The laser based, leading-edge technology is a cost effective market solution to fluid management and contamination control.
Features and benefits of the Icount PD include:
• Independent monitoring of system contamination trends.
• Early warning LED or digital display indicators for Low, Medium and High contamination levels.
• Moisture % RH LED indicator (optional).
• Cost effective solution in prolonging fluid life and reducing machine downtime.
• Visual indicators with power and alarm output warnings.
• Continuous performance for dependable analysis.
• Hydraulic, phosphate ester & fuel fluid compatible construction.
• Self diagnostic software.
• Fully PC/PLC integration technology such as: RS232 and 0-5 Volt, 4-20mA.
|
|
|
Transmitters are an integral part of on-line measurement systems used to monitor and control industrial processes. METTLER TOLEDO offers a comprehensive range of transmitters for pH, DO, conductivity, resistivity, TOC, dissolved ozone, turbidity,
|
|
The PowerMon Kolorimeter is a versatile applicable on-line measuring
instrument. It guarantees a permanent optimal water quality by the
continuous supervision of the legally prescribed limit value for total phosphate and ortho-phosphate in the outlet of municipal and industrial purification plants.
Advantages:
-precise results
-connection of up to 100 external,
physical measuring sensors
-fully automatic operation
-easy, comfortable operation
-fast data transfer
-self-monitoring system
-remote maintenance and network ability
-graphic user interface with interactive
Touch Screen operation
-update of the operating software or
download of data by USB stick
-minimum operating cost by small
reagent consumption
-second measuring point
without surcharge
-operation also possible
without housing
|
|
The low level phosphate ion analyzer, model 7121, is used for online measurement of phosphate ion concentration in the boiler water, etc., of thermal power plants.
* Measurement time as short as 5 minutes
* Concentrations are output for each sample point separately, or those at all the sample points may be output together.
* If there is no sample at a sample point, the analyzer automatically skips to the next sample point.
|
|
|
|
Liquid analyzers
