Material testing machine: compression, tensile, bending, ...

123 companies | 1038 products
Filters
  • What’s new?

Abrasion resistance is an important property for paint and coatings. An abrasion test is also common for tile, flooring, furniture, wall coverings,...

adhesion tester / paint - 10 g - 12 kg

Several stylus designs to optimize the test method
Fast setup and...

adhesion tester - PosiTest  AT-A

Built-in hydraulic pump with user selectable pull-off rate for precise results
Battery operated for...

adhesion tester - PosiTest  AT

Portable instrument for in the field use
Easy to read display
Wide selection of dolly sizes to maximize...

impact  tester - esp-10

Portable design to run tests outside the laboratory
Can...

{{productDetail[18571]}}
texture analyzer / for the food industry - TVT 300

Food texture is closely linked with customer perception of sensory properties and hence with food products customer value. The TVT 300 texture...

{{productDetail[61918]}}
dynamometer testing machine / with digital controller - 500 - 5000 N | FMS series

The Starrett FMS500 Series is a single-column force measurement testing system optimized for high-volume production and quality control testing. The FMS500 frame has a 500N (112lbf) testing capacity ideal for tensile or...

{{productDetail[11639]}}
traction test stand / manual - max. 1000 N | BAT1000

Precision Manual Force Test Stands: BAT1000
The model BAT1000 is a versatile and smart systems designed specifically for testing in quality control, manufacturing, and R&D areas. It is suitable to control a wide range of samples and testing protocols. Application examples include: Tensile force measurement, compression force measurement, peeling test, tensile strength or shear...

force measurement stand - max. 2500 N | TEX 555

The TEX 555 test stand is ideal for low and medium force testing when a quick result is required. This manual test stand makes accurate and repetitive tensile and compression...

dynamometer testing machine / with digital controller - max. 2500 N | Stentor II

The test stand Stentor II is a complete force measurement system, ready to be used. Designed with all the technology of our force gauge Centor Touch, it can perform force measurement in tension and compresion up to 1000 N. The Stentor II is designed to perform tests on various type of materials in production or quality labs when the speed of the test is specified or when the speed changes the results...

dynamometer testing machine / with digital controller - max. 2500 N | Stentor II

The ANDILOG TWIST is a manual torsion testing device, capable of performing accurate, repeatable and versatile torque measurements. It is available in a range from 1 to 60 Nm and features advanced Centor Touch...

wedge grip - max. 100 kN

Our most popular clamp! Extra strong self closing sliding wedges...

{{productDetail[7999]}}
wedge grip - max. 100 kN

Abrasion resistance is an important property for paint and coatings. An abrasion test is also common for tile, flooring, furniture, wall coverings,...

wedge grip - max. 100 kN

In order to perform satisfactorily, coatings must adhere to the substrates on which they are applied. There are three different adhesion test procedures to assess the resistance of paints to separate from...

wedge grip - max. 100 kN

For a coating to perform properly during use, the paint must have the proper amount of flexibility to withstand cracking under stress....

wedge grip - max. 100 kN

The Impact Tester is a widely used device for the coating and plastic industries. In both industries impact resistance is measured by a falling weight...

{{productDetail[11684]}}
texture analyzer - CT3

The new Powerful CT3 Texture Analyzer has characteristics of Compression and Tension. The new CT3 texture analyzer is introduced by Brookfield Engineering. It is the most powerful, affordable and stand-alone Texture Analyzer...

texture analyzer - CT3

The TA-GPJ General Peeling Jig was developed to measure the force required to peel the lid off a sealed container. A strong adhesive bond is critical to preventing contamination and spoilage, but ease and consistency when opening is equally important to...

{{productDetail[20805]}}
force measurement stand - 150 lbf | MT150

The MT150 Manual Force Tester (150 lbf / 660 N) made by Ametek is intended to supply a variety of cables for the purpose of interfacing with Chatillon® force gauges, force testers, printers...

force measurement stand - 500 lbf | MT500

CHATILLON® presents MT500 Series manual force tester. The mechanical test stand is a user-friendly solution for measuring force up to 500 lbf (2.5kN) capacities. For controlling crosshead speed and travel, it is possible to equip the stand with a quick-action...

pneumatic force test stand - 500 lbf | TT series

TT Series Pneumatic Tester (500 lbf / 2.5 kN)

The CHATILLON® TT Series is a pneumatically-operated tester for measuring breaking strength of electrical leads, terminals, connectors, wire wraps, etc. It is ideal for areas...

traction test stand / compression / vertical / motorized - 110 lbf | LTCM100 series

The LTCM100 Series is a line of motorized test stands manufactured by Chatillon®. The series is a cost-effective motorized tester enhanced for product floor operations.

When integrated with...

traction test stand / compression / vertical / motorized - 550 lbf | LTCM500 series

The CHATILLON® LTCM500 Series comprises of motorized test stand. It is well suited for product floor operation. Testing system that is ideal for compression, tensile and peel testing operations...

{{productDetail[15294]}}
sheet testing machine - 1000 kN

Erichsen Testing machines are the result of exceptional engineering, with deep emphasis on quality control, perfection and innovation. The outstanding machines are geared to deliver long-lasting durability, efficiency and solidity in performance, combined with virtually negligible maintenance requirements.

The machines are manufactured in compliance...

ear measuring device for cupping deep drawing test - Model 126

The 126, manufactured by Erichsen, is an ear measuring instrument that is ideally...

sheet testing machine - Model 161

Electro-hydraulical Testing Machine to carry out the cupping test on all ferrous and non-ferrous metals, including:

Programmable Logic Controller (PLC),
maximum drawing force of 1,000 kN,
maximum drawing speed of 200 mm/min, controlled via proportional distributing valve with pressure balance
...

the formability of coating materials testing machine - DIN ISO 1520 | 202 M

The 202M is a lacquer and paint testing machine manufactured by Erichsen. These tools are used for lacquers and paints with all types of...

the formability of coating materials testing machine - EN ISO, EURONORM, BS, NF, GOST, UNI, UNE | 242-Basic

242 Basic is a cupping and deep-drawing cup test material from Erichsen. It functions as an automatic test sequence, with a stop function at specimen failure. It is...

{{productDetail[20681]}}
traction testing machine / compression - DYNO

It is a universal testing machine capable of carrying out tensile, compression, bending and shearing tests. Operation is manual, semiautomatic, and automatic. The test instrument can be modularised...

universal testing machine - AURA

UNIVERSAL TESTING MACHINE CAPABLE OF CARRYING OUT TENSILE, COMPRESSION, BENDING AND SHEARING TESTS.
Operation is manual, semi-automatic, and automatic.
Testable objects include: springs, metal wires, plastics, cables, chains, hooks and other. The test instrument can be modularised taking into account that the structure can house 3 permanently...

torsion testing machine - TR series

The equipment is manually operated using both right and left torque control units on springs, which have two flexible and adjustable stops for the angular position. It has a horizontal structure...

compression testing machine - SIDE LOAD

The Side Load Series , manufactured by EasyDur® , is a measurement that is taken through to a platform with 6 load cells along with an equipped software with 3D graphics...

compression testing machine - BOGIE PORTAL

The Bogie Portal is a compression testing machine developed by Easydur Italiana. It is mainly used for railway bogies. The unit is supplied with 20+20 tonnes fixed crossbar for compression tests, and 2 electric or hydraulic pressers with...

{{productDetail[39701]}}
friction tester - H16

The H16 Model is a friction and wear analyzer developed by Kett. It is mainly used to tests friction along the...

scratch tester / resistive - H18

Scratch resistance is calculated as the result of continuous loading. A scratch needle is loaded onto the test surface. The mobile base holding...

friction tester - H10

Install a test piece onto the ascending board under the flat indentor. The ascending board is equipped...

friction tester - Heidon94AI

The Heidon94AI Model of Friction and Wear Tester, manufactured by Kett, is specifically designed as a portable and non-destructive...

{{productDetail[71402]}}
traction testing machine / compression - max. 500 N, 950 mm | XLW(EC)

The XLW (EC) Auto Tensile Tester is a tensile/compression testing machine which features eight independent test modes. The machine has...

peel force test stand / motorized - 0 - 200 N | Resolution:0.01N | BLD-200N

The Motorized Peel Force Test Stand Series BLD-200N is manufactured by Labthink Instruments Co.,...

compression testing machine / for cardboard boxes - Max 45kN, 1% of FS, 1daN | XYD-15K

XYD-15K Box Compression Tester designed specifically for cardboard boxes. It is lightweight too, weighing just 800 kilograms. There are four testing modes, namely, maximum load, deformation under defined...

plastic films friction tester / paper - max. 5 N, ASTM D1894, ISO 8295 | MXD-02

MXD-02 Coefficient of Friction Tester is applicable in static and kinetic coefficient of friction tests on the surface of materials, floor,...

tear resistance tester - ISO6383, ISO1974, ASTM D1922, D1424, D689| 200~6400gf|SLY-S1

The SLY-S1 is an Elmendorf tearing tester engineered by Labthink. It is suitable for use in tearing test of textiles, paper...

{{productDetail[58198]}}
tear resistance tester - ISO6383, ISO1974, ASTM D1922, D1424, D689| 200~6400gf|SLY-S1

This hot set test and heat pressure tester is developed by iiM AG. It is specifically designed to...

sample cutting machine - 1 - 65 mm

The Cable Cutter 65 prepares your cable samples optimally for qualitative measurements in offline cable measuring instruments. With the Cable...

sample cutting machine - 1 - 65 mm

The Cable cutter ORC Micro is a sample cutting device...

sample cutting machine - 20 - 150 mm

The ORC 150 cable O-ring cutter is engineered with a cable sheath cutter that provides...

materials testing machine - HCP 1000

The HCP 1000 is a cable measurement device that features a camera-based system. The device is used...

{{productDetail[80993]}}
materials testing machine - OCFM

The One Component Foam Measurement device OCFM is specially designed to measure the rise profile, the rise pressure, and the reaction temperature of One Component Foams (OCF). The OCFM comprises a cylindrical expansion...

materials testing machine - Resimat® 150

The Resimat 150 is intended for measuring the recovery time which is based on the Ikea® specification no. IOS-MAT-0076. This states that a 150x150x150 mm³ foam sample...

materials testing machine - SubCASE®

The Subcase® is manufactured by Formay Messtechnik, and is a laboratory device for measuring the pot life and the curing...

{{productDetail[30235]}}
test kit - INOX TEST

The Inox Test series, manufactured by Nitty Gritty ®, is utilized as a physico-chemical test kit for stainless steel alloys that permits a rapid and neat testing of electrochemical to avoid error when identifying...

stainless steel passivation tester - PASSI TEST PLUS

PASSI TEST PLUS allows to check the real state of passivation on the stainless surface and certify, in accordance with regulations and laboratories standards, the quality of the satinless and of the goods manufactured using it.

The instrument consists of two parts: the probe with inside the electrochemical...

stainless steel passivation tester - PASSI TEST

PASSI TEST PLUS allows to check the real state of passivation on the stainless surface according to international regulations and laboratories standards, the quality of the satinless and of the goods manufactured using it.

The instrument consists of two parts: the...

{{productDetail[24680]}}
varistor tester - 1.5 - 1 000 µs | MIG0603CLP

The MIG0603CLP, manufactured by EMC Partner, is an SMD varistor tester equipped with wave...

varistor tester - 8 - 20 µs | MIG0612UL

The MIG0612UL is a Varistor tester developed by EMC Partner AG. This device is...

{{productDetail[40473]}}
compression test stand / traction / vertical / manual - max. 3000 N

Max. capacity 500 N
Vertical manual test stand with hand wheel for measuring compression and tension forces
Rugged design
Test stand is available with distance measuring system and extended stroke

Special...

compression testing machine / traction / vertical - max. 5 000 N

The vertical motorized test stand is ideal for single as well as continuous tests and comes with a digital adjustable travel speed. One can use it for measurement of compression and tension. For endurance...

compression test stand / traction / horizontal - max. 3 000 N

The Manual horizontal tensile and compression test stand is a horizontally-structured manual test stand that is equipped with a hand-wheel...

compression testing machine / traction / horizontal - max. 3 000 N

Max. capacity 3000 N

Horizontal motorized test stand for single and continuous tests with infinitely adjustable travel speed

For compression and tension tests

Test stand ist available with extended stroke, slow start, distance...

universal testing machine - max. 5000 N | ZPM

The Universal Testing Machine has a maximum capacity of 5000 N for force-displacement-measurements or constant-force-measurements. It also has a programmable traverse...

{{productDetail[34081]}}
compression test stand / traction / horizontal / motorized - 100 lb | FGS-100PXH

FGS-100PXH / L (100 lb capacity)
Shimpo's advanced motorized test stands allow the user to obtain the most accurate, repeatable results available in the market today....

traction test stand / compression / vertical / motorized - 100 lb | FGS-100PVH / L

The FGS-100PVH / L Series, manufactured by Shimpo®, is an exceptional motorized programmable force test stand that enables the user to gather a...

compression test stand / traction / vertical / manual - 110 lb | FGS-100H

The FGS-100H Test Stand(110 lb capacity - hand wheel operated) are capable of obtaining an accurate, consistent results without availing...

compression test stand / traction / vertical / manual - 50 lb | FGS-50S

Shimpo Instruments provide the FGS-50S Manual Hand-lever Force Test Stand, equipped with a modular and compact design for reducing footprint...

compression test stand / traction / vertical / manual - 1000 lb | FGS-1000H

The FGS-1000H is a manual test stand which can support a maximum of 1000 lbs. It is engineered for testing both the tension and compression of target materials. Almost all gauges from various manufacturers are compatible...

{{productDetail[11663]}}
materials testing machine / static - 50 N - 5 kN | CMT2000 Series

Model: CMT2501;CMT2102;CMT2202;CMT2502;CMT2103;CMT2203;CMT2503
Capacity: 50N; 100N; 200N; 500N; 1kN; 2kN; 5kN

Introduction:
SANS...

electromechanical universal testing machine - 50 - 500 N | CMT8000 Series

Model: CMT8501; CMT8102; CMT8202; CMT8502
Capacity: 50N; 100N; 200N; 500N

Introduction:
SANS CMT8000 Series desktop Electromechanical...

electromechanical universal testing machine - 50 N - 10 kN | CMT6000 Series

Model: CMT6501; CMT6102; CMT6202; CMT6502; CMT6103
CMT6203; CMT6503; CMT6104
Capacity: 50N; 100N; 200N; 500N; 1kN; 2kN; 5kN; 10kN

Introduction:
CMT6000 Series table-top universal testing machines...

electromechanical universal testing machine - 500 N - 30 kN | CMT4000 Series

The CMT4000 Series, manufactured by MTS, is an electromechanical universal testing machine which is easy to set up, operate and maintain. It has a high measuring...

hydraulic universal testing machine - max. 2000 kN  Exceed E64

The E64 Series, manufactured by MTS, is composed of hydraulic universal testing machines. Available models are E64.305 (E), E64.605(E), E64.106(E), and E64.206. They have 300kN, 600kN, 1000kN, and 2000kN capacities....

{{productDetail[54100]}}
abrasion tester - 5135 / 5155

The Taber® Rotary Platform Abrasion Tester - Model 5135 or 5155 is first introduced in the 1930's . It is designed with a highly-precised built-in parts that was developed...

abrasion tester - 5750

The Taber Linear Abraser incorporates a horizontal arm that reciprocates in a linear motion. Attached to the end of the arm is a precision bearing spline shaft that creates a 'free-floating' test system and permits vertical movement. The test attachments are affixed to the bottom of the spline shaft and a weight...

abrasion tester - 5900

The Taber® Reciprocating Abraser (Abrader) Model 5900 is a test apparatus which is suitable for use in flat surfaces. It features a counterbalanced arm which pivots on a height gantry system. The test arm can also...

crockmeter - 418

The Crockmeter Model 418 by Taber® offers a fast and precise process in determining the amount of color transported from textile materials, such as fabric, carpeting, yarn and leather, to other surfaces by rubbing....

linear  abrasion tester - 5800

The 5800 model is manufactured by Taber® Industries, and is a heavy duty linear abraser that is utilized to evaluate material components of products with a rugged, durable surface finish. It requires...

{{productDetail[18732]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation