Viscometers, rheometers

75 companies | 312 products
Filters
  • What’s new?
rheometer - 0.07 - 1.2 mm, 0.3 - 25 000 mPa.s | RV-10000

What if you could evaluate the viscous behaviors of paints, creams, greases, polymers and many other kinds of non-Newtonian fluids more quickly, easily and precisely than you ever thought possible? With A&Ds tuning fork vibro rheometer RV-10000, you will have the following unique advantages:

First, you can quickly alter the vibration amplitude to eight levels to create different shear...

viscometer - 2ml, 0.3 - 10 000 mPa.s | SV-A series

The Tuning Fork Vibro Viscometer, the SV-A Series, is a solution to the excessive use of expensive sample fluids during viscosity measurements. This new viscometer can perform viscosity measurements with sample liquid as small as 2ml (SV-1A).

The SV-A Series incorporates the tuning fork vibro method. Unlike a rotational viscometer, which requires several different rotors to cover a wide...

{{productDetail[54946]}}
rheometer - 0.2 - 350 U/min, max. 400 Nm

The Plasti-Corder® Lab-Station is suitable for mixers and extruders with temperature control, using the model's universal docking station. The 16 kW model's speed ranges from 0.2 –...

rheometer - 0,2 - 150 U/min, max. 200 Nm

The Brabender® Plastograph® EC is the economical table-top version of the universal torque rheometer Plastograph® applied all over the world for application investigations...

rheometer for the food industry - ICC No. 115/1, AACC, ISO 5530-1

Farinograph®-AT
Application

The determination of the flour quality and its processing characteristics are a basic demand in the milling and baking industries for ensuring optimum and uniform flour qualities for the manifold baking and noodle products.

Measure the water absorption of flours
Determine the rheological properties of the dough
Check production...

rheometer for the food industry - ICC No. 115/1, AACC No. 54-21, ISO 5530-1

The Farinograph-E Application is utilized to determine the flour quality and its processing characteristics. In the baking and milling industries, these are basic demands in order to ensure uniform and optimum flour qualities for manifold baking and...

laboratory viscometer for flour - ICC No. 126/1, ISO 7973, GB 14490-93 | Amylograph®-E

Amylograph®-E
Application

The baking properties of flour mainly depend on the gelatinization of the starch and on the enzyme activity (a-amylase) in the flour. The Amylograph®-E measures wheat, rye, maize, and rice flour and provides

Assessment of the flour quality
Suitability...

{{productDetail[50061]}}
melt flow indexer (MFI) for thermoplastics - 30 - 400 °C

■ Instron®'s CEAST Melt Flow Indexers are specifically designed for easy and accurate measuring of the Melt Flow Rate (MFR) and the Melt Volume Rate (MVR).

CEAST Melt Flow Indexers range from systems that perform a simple manual test procedure to automated testing systems performing multiple weight tests. Our testers meet International ASTM and ISO standards.

►...

capillary rheometer - max. 50 kN

Plastics are materials with unique ability to flow when heated to low temperatures. They are formed in different shapes for applications. Their flow properties are complex and affected by...

instrument for determining heat deflection temperature (HDT) and Vicat softening point - max 500 °C

Instron's CEAST HDT & Vicat tester measures thermal properties of plastic items with accurate values like analysis of heat deflection temperature (HDT) and Vicat softening temperature....

{{productDetail[18463]}}
instrument for determining heat deflection temperature (HDT) and Vicat softening point - max 500 °C

The Pet Plus Series, manufactured by Lloyd®, is a polymeter testers that is designed for the safe solvent-free intrinsic viscosity measurement of moisture-sensitive PET. It can be operated in stand alone mode or with our powerful data analysis software...

melt flow indexer (MFI) for thermoplastics - MFI-10

MFI-10 Melt Flow Indexer
(Tests to BS2782 Part 7: Method 720A, ISO 1133 and ASTM D 1238 Methods A and B)

The MFI-10 is an intelligent, modular system, which offers flexibility of testing and increased automation, especially when...

melt flow indexer (MFI) for thermoplastics - MFI-9

Key Features

*
Simple set up, operation and maintenance
*
Manual test method according...

{{productDetail[15292]}}
asphalt rheometer - 0.01 - 10 mNm | DSR

Market proven worldwide, the Malvern DSR dynamic shear rheometer has been...

rotary rheometer - 0.005 - 250 mNm | Kinexus ultra+

The Kinexus ultra+ rheometer has the highest sensitivity air bearing and widest torque range, coupled...

rotary rheometer - 0.01 - 200 mNm | Kinexus pro+

Targeted at the rheological characterization of dispersions and other complex fluids and soft solids, the Kinexus...

capillary rheometer - 10 nNm - 200 mNm | Kinexus lab+

The Kinexus lab+ is designed to withstand the rigors of a busy Quality Control laboratory, to provide robust and reliable rheological test capabilities. Ease of use is paramount in this environment, and the rSpace software enables Standard Operating Procedure (SOP) driven rheological testing for test protocols that can be used company wide.

The Kinexus lab+ rheometer can be easily configured...

rheometer - m-VROCi

The m-VROCi is an innovative microfluidic rheometry manufactured by Malvern. It functions...

{{productDetail[14669]}}
digital penetrometer - PNR 12

The PNR 12 model is a penetrometer that mechanically gauges the resistance an element...

softening-point tester - RKA 5

Anton Paar's RKA 5 is a softening point tester equipped with a mechanical ball-centering and dispensing...

rheometer - MCR series

The MRC series is manufactured by Anton Paar, and is a rheometer that is based on a concept at the cutting edge of technology. It has a powerful synchronous...

asphalt rheometer - SmartPave

The SmartPave dynamic shear rheometer (DSR) is based on the technology of MCR rheometers with the established EC...

rotary rheometer - RheolabQC

The Rheolabqc is manufactured by Anton Paar, and is a rotational rheometer that is based on technologies also used in R & D rheometers....

{{productDetail[16352]}}
capillary rheometer - CFT-500D/100D

The CFT-500D/100D series, manufactured by Shimadzu, is a flowtester capillary rheometer capable...

{{productDetail[25210]}}
automated modular viscometer - PVS 1

Th Processor viscosity measuring system PVS 1, has a modular concept and this allows for an efficient, quick and also...

laboratory viscometer - PVS

The S 5 is the actual measuring station of the PVS system. The head of the stand-alone measuring stand S 5 is comprised of the opto-electronic meniscus detectors as well as the entire micro-processor control...

capillary viscometer - -20 °C ... +150 °C | iVisc

The iVisc from Lauda DR. R. Wobser GmbH & Co. KG, is a capillary viscometer with temperature range from -20°C to +150°C. The viscometer is fully automatic, space-saving, and is easy to operate....

capillary viscometer - 3 - 75 ml

This Glass Capillary Vascometers is manufactured in different variety of designs with an application that differs in area, accuracy and operation. This is provided by...

{{productDetail[23650]}}
fully-automatic melt flow indexer (MFI) for thermoplastics - ISO 1133, ASTM D 1238 | Aflow

The Aflow, manufactured by Zwick, is an extrusion plastometer that is designed for laboratories with high testing volumes. It is used to measure the melt mass flow rate and melt volume flow rate to...

semi-automatic measuring device / for thermoplastic - ASTM D 3364, JIS K 7210 | Mflow

The basic version of the Zwick Roell Mflow extrusion plastometers can be used to establish the melt mass flow rate (MFR). The plastometer’s modular design is expandable using the piston transducer to permit determination...

plastometer - Cflow

The compact Cflow extrusion plastometers are designed as a stand-alone instrument for rapid monitoring of melt mass flow rate. They are primarily used for goods inwards checks at plastics...

instrument for determining heat deflection temperature (HDT) and Vicat softening point - HDT/Vicat Allround

Zwick's HDT/ Vicat all round instruments have been designed in a manner that enables them to be convenient for testing in research and development, inwards checks of goods,...

instrument for determining heat deflection temperature (HDT) and Vicat softening point - HDT/Vicat Standard

The HDT/Vicat Standard instruments are designed for use in goods inwards checks and production monitoring, as well as for education and training purposes. Different...

{{productDetail[15660]}}
melt flow indexer (MFI) for thermoplastics - LMI4000 series

Features and Benefits

Advanced microprocessor design
ASTM D1238 and ISO 1133-2005...

capillary rheometer - LCR 7000 series

Features and Benefits

All digital calibration
Increased speed and force range
Advanced electronics and software enable up to 45 shear stress or shear rate data points...

capillary rheometer - LCR 7000 series

Attaches to process using a single M18
Cost effective solution for on-line viscosity or melt index monitoring
No waste stream, tested...

in-line rheometer / with melt - CMR IV

On-line ASTM D1238 melt flow rate
On-line apparent viscosities
Data exchange by analog and digital input/outputs
...

in-line rheometer / with melt - FCR

Features and Benefits

Unique dual capillary design
On-line ASTM D1238 melt flow rate at two load conditions
Ideal...

{{productDetail[9068]}}
rotational viscometer - Elcometer 2300

The Elcometer 2300 range of rotational viscometers measures the viscosity of liquids in accordance with several standards.

Using a rotational viscometer, the properties of liquids and their resistance to shear or flow can be accurately measured.

Available...

{{productDetail[21009]}}
rotational viscometer - DV-E

To measure the absolute viscosity a rotational viscometer is used. For non-Newtonian liquids a digital viscometer that applies a precise shear rate is needed. For laboratory viscosity measurement BYK-Gardner offers a comprehensive...

rotational viscometer - KU-2

The KU viscometer is a digital version of the Stormer viscometer.

Automatically...

viscometer - CAP 1000+

Cone and Plate Viscometer with two fixed speeds.

Direct...

viscometer - AOC, ASTM, FTMS

The bubble viscometer sets are bubble tubes arranged in the most common...

viscometer - 20 - 1800 cSt, ASTM | Zahn

BYK-Gardner offers three brands of Dip cups:

Ideal...

{{productDetail[18571]}}
viscometer - max. 100 cSt, -50 °C ... +200 °C | 7829

The 7829 Viscomaster and 7829 Viscomaster Dynamic Viscosity Transmitters are major innovations in the measurement and control of heavy fuel oil (HFO) that supply engines, turbines and burners...

in-line viscometer - max. 20 000 cP, -50 °C ... +200 °C | 7827

The 7827 digital viscosity meters are used for quality and analytical measurements where kinematic viscosity at line and reference temperature...

viscosity transmitter - max. 20 000 cP, -50 °C ... +200 °C | 7829

The 7829 Visconic Viscosity Transmitter is used for the measurement and control of on-line process viscosity applications. It simultaneously measures real-time viscosity, density and temperature and...

{{productDetail[14564]}}
rotational viscometer - 20 - 50 000 cP | RVA

The RVA is a cooking, stirring viscometer with ramped temperature and variable shear capability optimized for testing the viscous properties of starch, grain, flour and foods. The instrument will analyze as little as two or...

rheometer for the food industry - doughLAB

The doughLAB includes a user-friendly Windows software program with traceable calibration designed for both millers and researchers, and automated water dispensing (no need for a buret). The mixing chamber and blades are...

rheometer for the food industry - micro-doughLAB

The micro-doughLAB is a small scale (4g) dough mixer and analysis system to determine the quality and processing characteristics of flour and dough....

{{productDetail[61918]}}
rotational viscometer - DV-E

To measure the absolute viscosity a rotational viscometer is used. For non-Newtonian liquids a digital viscometer that applies a precise shear rate...

rotational viscometer - DV-E

BYK-Gardner offers many choices to measure the kinematic viscosity of coatings, resins, and ink. A kinematic viscometer does...

{{productDetail[11684]}}
laboratory viscometer - DV-I Prime

The New DV-I Prime Viscometer...
...exciting new look, new feel and new features!


Middleboro, MA - Brookfield Engineering introduces the new DV-I Prime Viscometer featuring a totally new look and feel with several exciting new features. The shape, color scheme and keypad...

viscometer - CAP-2000

The CAP2000+ rotational viscometer is engineered with lower shear rates that makes it...

viscometer - CAP-2000

The Höppler principle is used to measure the viscosity of Newtonian liquid by measuring the time required for a ball...

in-line viscometer - 10 - 500 000 cP | TT-100

Brookfield's TT-110 In-Line Viscometers are engineered to deliver...

viscometer - 2 - 12500 cP | AST-100

The Viscometer Series AST-100 is manufactured by Brookfield. It has functional instrument that is good for users who are looking for viscosity...

{{productDetail[20805]}}
flow-time measuring instrument for viscosity measurements - DIN EN ISO 2431, ASTM D 1200 | 243 T

The 243 T by Erichsen is a flow time measuring instrument which is designed...

{{productDetail[20681]}}
falling ball viscometer - Viscobille V3T

Geserco has manufactured the Viscobille V3T falling ball viscometer for VI100 and VIE150 oils. The device...

falling ball viscometer - Viscobille V2T VI100

The GESERCO ViscoBille® V2T VI100 patented drop-ball viscometer is ideal for measuring monagrade VI100...

falling ball viscometer - Viscobille V2T VI150

The Viscobille V2T VI150 is a drop-ball viscometer that enables simple, rapid, and accurate...

falling ball viscometer - Viscobille VCD

The GESERCO VCD falling ball comparative viscometer / dilution-meter allows immediate cross check of the viscosity of any viscous liquid...

viscometer - ViscoTest

The GESERCO ViscoTest comparative viscosity gauge is used whenever the user needs...

{{productDetail[86541]}}
automated micro-viscometer - MINIVIS 445

MINIVIS 445 Viscosity Tester
Portable Micro-Viscometer

The MiniVis 445 is the clever combination of a rolling ball viscometer, an advanced density meter, and an automatic filling system: Precise determination of dynamic and kinematic viscosity over a wide temperature range, all in rugged instrument fit for heavy duty environments,...

automated micro-viscometer - MINIVIS II

MINIVIS II is an automatic, temperature-controlled viscometer suitable for all kinds of Newtonian liquids. It has reflection sensors...

{{productDetail[25243]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation