|
|
| Products 121 to 150 of 244 |
|
|
|
|
MC700 Motion-Controller with Firmwares CT701.xx:
Outstanding Performance with Rotary Cut-to-Length Shears in Coil Steel Applications
MC700 is a universal motion controller for 1 to 4 axis, programmable for multiple motion applications by simple download of the corresponding function firmware.
With use of our CT701xx firmwares this unit provides excellent solutions with all kinds of guillotine cutters and rotary eccentric shears needing a cosinus-compensated speed profile during the penetration of the tool.
The CT70104 Firmware (“light version”) is suitable for cutting aluminum or regular coil steel with lower thickness. The CT70110 firmware is recommended to cut hard stainless steel or coil steel of higher thickness.
Extremely smooth motion to protect mechanical solution, by self-optimizing polynomial speed transitions
High cutting accuracy, even during acceleration and at high line speeds
Programmable cosinus-compensated speed profile
Special torque control features to master the impact load when cutting hard materials like stainless steel etc.
Special profile features to avoid deadlock between tool and material
Embedded virtual master axis (selectable)
The MC700 hardware is a black-box unit for cabinet mounting.
Remote control and communication facilities via external operator terminal, serial PC communication, CANBUS, PROFIBUS etc. (see also Accessories)
|
|
Optimal Engine Power through Hydro-Mechanical Torque Control Eaton has added Hydro-mechanical Torque Control option for the versatile 420 series pump product line. Torque control limits the amount of input power that an open circuit pump will draw from the engine or prime mover. This control prevents engine stalling and helps in optimal utilization of engine power. This control allows a wide variety of application options to be met by a single pump control option.
Hydro-mechanical torque control provides a simple, low cost option for open circuit pumps. This new control complements the power-dense package offered by the 420 series product and is available in all four displacements (41cc, 49cc, 62cc & 80cc).
Applications
- Backhoe loader
- Skid steer loader
- Telehandler
- Mini-excavator
- Log-skidder
Features and Benefits
- Power dense design
- Compact design
- User defined torque setting
- Power/energy savings
- Prevents engine stalling
- Cost effective solution
|
|
|
The Promess Motorized Torque Control System is a plug and play, closed loop, CNC, measure and control system. The system is composed of an AC -Servomotor with integrated overload-protected torque transducer. This allows to link the NC-controled rotary-motion with monitoring of the torque / angel of rotation process. With the Unit you can trigger and monitor preciscly force and angle of force. The systemes can be linked with current bussystems and is availabel in different DIMENSIONS
|
|
|
|
|
|
Full Range Supplier
- YORK manufactures a full range of microprocessor and PLC-based control systems for operation and safety control
- Panels can be unit-mounted or free-standing, and are housed in carbon steel, stainless steel, or fiberglass enclosures
- All Panels are built in our UL508 shop and designed for the harshest environments, including hazardous area classifications. Built to NEC or IEC requirements to suit your needs around the world
- Single-source supply of controls with your process equipment ensures trouble-free commissioning and long term parts and service support
Quantum™
- Powered by a Pentium-class processor
- Continuous monitoring of critical system parameters
- Maintains desired operating conditions
- Protects the health of your equipment investment
- Quantum technology means local operator control
- Supports industry-standard, communication interface protocols, including:
Modicon Modbus ASCII serial
Allen-Bradley DF-1 serial
YORK Refrigeration/Frick ASCII serial
YORK ISN
Custom PLC Panels
- YORK builds custom-designed PLC (programmable logic controller) panels for both centrifugal and screw compressor systems
- A typical foundation uses Allen-Bradley ControlLogix, SLC500, or PLC5 Series PLC and hardware
- The PLC's are often combined with Bently-Nevada vibration and temperature monitoring systems, as well as centrifugal compressor anti-surge systems
- Extreme outdoor environments are no problem for YORK custom PLC panels
- They can be designed to ship loose for remote location in a control room
|
|
|
|
|
|
General Description
The profichip MPI12x is a communication chip with processor interface for MPI applications.
The MPI12x handles the message and address identification, the data security sequences and the protocol processing for PROFIBUS, which is the underlying transmission protocol.
Token handling, error detection and data pre-processing is executed out automatically by the MPI12x, relieving the host processor from all time-critical tasks and time-consuming arithmetic operations. Support of data transmission rates up to 12 Mbit/s, the integration of the PFOFIBus protocol into hardware, 4 KByte communication RAM and the configurable processor interface are features to create high-performance MPI applications.
Alternatively, the MPI12x can be used as a Serial Interface Device supporting synchronous and asynchronous standard protocols as well as user defined protocols with data transmission rates up to 12 Mbits/s.
Moreover the well-known PROFIBUS Slave Core VPC3+C (extended by DP-V2 service “Clock Synchronisation”) is integrated as well.
|
|
C-220
2 channel controller for one or two guns. Production speed up to 300 meters/min (984 ft./min). Typical application: spine glued brochures, spot closure of direct mail or signatures, edge gluing for sleeves etc., carton seeling with hot-melt.
|
|
deltadue® series control modules with fieldbus for DIN rail mounting
A complete range of compact and flexible modules open to the external world
ASCON's process control experience and the increasing need for integration of the control systems have brought to the development of the deltadue® series temperature and control modules, single and dual loop.
|
|
The oil management system controls the oil level in the compressor crankcase. The system consists of the following ESK-components:
• ESK – Oil Separators
• ESK – Reservoir
• ESK – Oil Level regulators
• ESK – Pressure Valve
• ESK – Strainers
The oil carried over by a compressor in parallel systems has to be returned in the same quantity under all operating conditions. ESK-Oil management systems provide this control and work reliable.
Oil management systems are essential to control oil level if different compressor models are equipped in one a refrigeration system.
|
|
The panel-mounted measuring and control stations DULCOTROL® are online measuring and control units which are available in a variety of designs and optimised depending on the individual application for the three most important applications in water treatment:
Drinking water / Food & Beverage
Cooling water
Waste water
|
|
DST4601/PX is the evolution of SICES renowned DST4601 AMF controller.
Aimed particularly to parallel application, thanks to its high degree of configuration, it can easily be used in quite all standard and special gen-set applications.
Born to manage the last generation of electronic engine, it supports CAN interface toward quite all most popular engines: J1939 protocol for VOLVO, SCANIA, DEUTZ, PERKINS, CAT, IVECO and MTU protocols for MTU engines.
A large graphic display, with a resolution of 240x128 pixels, allowed to implement a simple to use operator interface that is able, at the same time, to report an huge number of electrical and engine measures and information. Engine troubleshooting now can be made by textual interface (for example all MTU diagnostic codes are translated in plain English text).
|
|
Generator Paralleling Controller – GPC-2
Compact all-in-one control unit designed for applications programmed in a PLC. The GPC-2 contains all necessary functions for protection and control of a synchronous/asynchronous generator along with all necessary galvanically separated 3-phase measuring circuits.
The GPC-2 is intended for land-based applications. It is designed for the following applications (can be combined):
> Stand-alone
> Parallel with other generators
> Parallel with the mains
The GPC-2 can synchronise the generator and after synchronisation carry out all necessary generator control and protective functions. It is well-suited for PLC-controlled systems and the interfacing can be done via binary and analogue I/Os or via (optional) serial communication.
|
|
Generator Paralleling Controller – GPC-2
Compact all-in-one control unit designed for applications programmed in a PLC. The GPC-2 contains all necessary functions for protection and control of a synchronous/asynchronous generator along with all necessary galvanically separated 3-phase measuring circuits.
The GPC-2 is intended for land-based applications. It is designed for the following applications (can be combined):
> Stand-alone
> Parallel with other generators
> Parallel with the mains
The GPC-2 can synchronise the generator and after synchronisation carry out all necessary generator control and protective functions. It is well-suited for PLC-controlled systems and the interfacing can be done via binary and analogue I/Os or via (optional) serial communication.
|
|
The PHC-100A interface converter can be connected to the RS-232C port on your programmed PC to control most PATLITE products, both visual and audible.
* 16 terminals provide 8 isolated non-voltage contact outputs.
* Reset push-button switch provided to reset all outputs to the off-state.
* Commercially available serial to USB converter can be used with this
converter for control from a USB port.
* AC adaptor is not included.
|
|
The DP5000 is a dual channel pH Controller providing either relay or proportional pulse outputs to drive chemical metering pumps. A custom backlit display provides constant information regarding
controller conditions.
High and low alarm points, delay and limit timers, and other programmable features make the DP5000 the most adaptive pH controller available.
Features:
Custom Backlit LCD
Temperature Reading
High and Low Set Points
Proportional Pulse or Relay Output
Both Standard
Limit Timers for Each Output
pH Programmable Response Delay
Single and Dual Point Calibration
0%u201314 pH Scale
UL CUL CE - Certified
Display Items:
Current pH Value
Current mA Output Level
Current Pump Speed
Temperature
Timer Settings and Readings
Alarm Conditions
|
|
|
|
|
|
|
ATI's versatile Q45P/R pH/ORP system is designed for use in all industrial and municipal applications. The sensors are engineered to function normally in applications where conventional sensors quickly fail. Conventional pH/ORP sensors have an “open reference system,” which means the reference element and electrolyte are in contact with the process. This allows chemicals to diffuse into the reference chamber and alter the reference system. When any of these problems occur, cleaning and calibration cycles increase and the sensors fail much faster, all of which costs you time and money. The differential pH/ORP sensors utilize a “sealed reference system,” where the sensors are constructed with a second glass pH electrode as the reference element. The glass reference system protects the sensor from chemical poisons (sulfide, cyanide, chlorine, bisulfite, etc.) that destroy conventional pH sensors. The Q45P/R Auto-Clean System is designed to extend sensor cleaning intervals on pH and ORP sensors that are mounted in applications containing high levels of solids contamination. The Auto-Clean System uses high pressure air to remove contaminants from the face of the sensor automatically.
|
|
|
|
|
|
alpha-pH800 1/4 DIN pH/ORP Controller
Product Features :
- User-Customization through Advanced Setup Menu offers flexibility in matching the controller's functions to suit individual's specific requirement
- Automatic Calibration with Auto-Buffer Recognition eliminates mistakes during calibration
- Symmetrical Mode Operation eliminates electronic noise problems when used with solution ground
- One-Point Online Calibration without shutting down the line
- Hold Relay for use with float switches/flow switches and other controllers as a failsafe function
- 0 to 2000 Second Time Delay Adjustment on control and alarm delays
- Galvanically Isolated Scaleable 0-20/4-20 mA Outputs for pH/ORP
- Hysteresis Band Protection against rapid control switching of relays from wear and tear
- Non-Volatile Memory retains all stored parameters and calibration data even if power fails
- Large Dual Display shows pH (or ORP) with temperature
simultaneously - features clear multiple icons, set points, and status messages
- Choice of Temperature Sensor Pt100/Pt1000 with
2-wire or 3-wire temperature input selection
- Easy Installation and Wiring with detachable plug-in connectors
Applications :
General: Useful for any batch or on-line type application that requires accurate pH or ORP control.
Water Purification/Treatment: Use for batch and on-line control of incoming process water, rinse water treatment, recirculating system and waste water treatment.
Industrial: Ideal for chemical processing, food processing. aquarium, pharmaceutical, hydroponics and waste control industries.
|
|
Features:
- Compact 1/16 DIN size fits into standard industry panel cutouts.
- Microprocessor for reliable, accurate measurement and control of pH.
- Large and super bright LED display of pH (red) and temperature (green)
- Rear screw terminals for power, 2 sets of relays, Pt 100 input and BNC for pH input.
- Optional NEMA-4X gasketed lens cover fits over front bezel of controller-made of watertight corrosion resistant ABS plastic.
|
|
The WPH410/420 and WDP410/420/440 Series pH/ORP on-line process controllers are designed for a broad range of industrial, commercial, and municipal water treatment applications. WPH controllers are easily configured to accurately measure pH or mV (ORP) values from Walchem’s WEL and WDS differential combination electrodes, or any conventional combination electrode.
A versatile output configuration allows you to program up to four outputs in a variety of control modes. Select from on/off mechanical relays or pulse proportional control for direct connection to metering pumps. The easy-to-use menu format and pre-wired, pre-mounted panel system options make set-up and installation quick and simple.
Integrated datalogging is available to validate system performance. A USB memory stick is all that’s needed to extract data and event logs that include electrode measurements, temperature and relay status. Download log files from the USB stick to a PC at your convenience. It couldn’t be easier!
|
|
range of industrial microprocessor-driven instruments with automatic temperature measurement and correction, wall mounting IP65 or flush fitting, with two thresholds, two analogic output functions 4 - 20 mA, available as:
- pH meter
- millivolt meter (Redox)
- conductivity-meter
|
|
Model SC104V:
- Three independent channels allow full control of three devices
- Modular design permits addition or removal of channels
- Soft limits always visible on display
- Variable speed control through front panel or GPIB interface
- Rack mount option
- Fiber optic interface; ST connectors
- Full manual control from front panel
- 115 or 230 volts AC
- System diagnostics
- Six channels for remote switching of auxiliary equipment
- Compatible with industry standard automation software
- User friendly
- Expanded command set: SPEED, TARGET, SCAN, AUX
- LCD display
- Independent jog keys
- GPIB TARGET command
- Self-test
- Fully IEEE488.2 compatible
|
|
|
Whether long or short strokes, the ZA reciprocator and XT positioner from ITW Gema provide efficient automation for optimized coating quality.
|
|
iControl® Integrated Control System
Stop The Waste And Take Control with iControl.
Now you can stop the waste and take control of your powder coating operation with Nordsons iControl integrated control system, featuring closed loop digital flow control, automatic gun triggering and reciprocator control.
Traditional open loop controls lack repeatability and don't compensate for incoming air pressure changes at the powder pump. With closed loop flow control, like iControl, changes in compressed air input are measured and converted in to digital signals, then sent to a proportional valve.
This valve then compensates for varying pressure by changing the airflow to the pump accordingly - resulting in repeatable powder output from the gun and uniform film build on the part beng sprayed.
The technology provides digital control of all application parameters and gun movers through a single, user-friendly operator interface.
|
|
As a major Original Equipment Manufacturer and Supplier of turn-key plants, ALSTOM Power Service delivers not only after sales service for the key components, but also a broad spectrum of instrumentation and control as well as plant information systems solutions that allow to modernise plant control and improve and optimise your power plant business.
Instrumentation and Control Systems (I&C) perform the functions of regulation, protection, control, monitoring, alarm and information management on your power plant. It is a central information system that enables plant operators to supervise the plant effectively and to make the right decisions in time, and it ensures fault free operation of your plant. Therefore, state of the art I&C is beneficial and vital for plant information, decision making, competitive high end performance and high reliability of the plant.
|
|
This decentralized control system applies personal computers to a high degree in order to obtain an extremely high cost-performance ratio in process control.
|
|
|
|
|
|
PowerAGC 2000 Power Plant Control System
The PowerAGC 2000 Power Plant Control System is designed according to the specific requirements of a power system, combining the most advanced technology and Wescon's 10 year engineering experience. It has been widely used in Tianwan nuclear power plants and in more than ten power plants in China. With metering, control and signaling all integrated in one, PowerAGC 2000 is designed specially for power plants, It consists of two parts, the first being the main control level which is provided by two redundant D200 SMU, and the second level which is bay level control, provided by D25 devices.
functions & Features:
- With reliable AGC function, the dispatching center sends AGC commands to DCS and SIS directly by a communication host (D200)
- The bay level device (D25) communicates directly with communication hosts of both the dispatching center and the backup center by linking directly to Ethernet
- Utilizes latest technology and design techniques to improve system reliability
- Supports remote control, substation system control and local control with high reliability
- Performs synchronization checks
- Locks Local or Remote operations, and inter-locks the operations between units
|
|
|
|
|
|
The GAC21 is the heart of the main electrical power distribution system. It optimizes power management and saves electrical energy in controlling all onboard generating plants on board vessels.
Both the hardware and software for the PLC conform to IEC61131, the international standard for programmable controllers. The PLC also conforms, as standard, not just to the IEC/JIS, but also to the CE marking/UL standard.
Processing speed : 70 ns
Program memory capacity: Multiple of 16k/32k
Number of input/output points : 8192 max.
Processing speed for dedicated bus : 25Mbps
The PLC constantly monitors the power, CPU, and signal transmission lines. If an error occurs, the error indicator on the malfunctioning module will light up, allowing you to identify the module very easily. The PLC is designed in modules, allowing you to replace any module easily in a short time.
Terasaki's multiple transmission system"TM", which has many records on uses, has been configured using loop topology. It covers data transmission between the switchboard, group starter panel, and integrated type engine monitoring system. It is also applicable to communication with the bridge if serial transmission is used. This allows personnel in the bridge to very easily monitor the status of the power distribution system.
The modules of the PLC are independent for each function. Therefore, if a failure occurs, it can be rectified by replacing only the module in question. This saves the maintenance cost.
The P-ROM containing the software for the PLC comes as a cartridge. Therefore, if any change is made to the software, the P-ROM can be easily changed for this purpose.
The settings for the automatic control of the generator can be changed easily using the handy type setting device (HT21-001).
The GAC21 may be located in a decentralized position for each generator, allowing you to control the generator independently. When used with Terasaki's watch-free system as the best combination, the GAC21 is applicable for a more advanced onboard LAN system.
|
|
|
The Model 233v3 Pulsed DC Controller has been designed to operate with the Series 200 range of ionisers for ESD applications. The 233v3 is light, compact and features lockable plug and socket connectors for quick release. It also provides the option of Steady State DC (SSDC) output.
|
|
|
The Model 977v3 Pulsed DC Controller has been designed to operate with the full industrial range of Meech Pulsed DC static elimination equipment. It is light and compact but able to cope with the most technically demanding industrial applications. In addition to the ability to control power output, frequency and polarity, the 977v3 also offers alarm and remote monitoring and control functionality. A new feature of the 977v3 is an 8- way DIN for connection of an ion balance sensor and feedback system. Patent No. ZL200530000278.0
|
|
|
The NORTECH TT offers an excellent and increasingly cost-effective solution for direct, accurate and real time hot spot temperature measurement of power and distribution transformers.
|
|
|
|
|
|
DESCRIPTION:
The PSP 100 is a tool able to manage up to five controls simultaneously.
It is equipped with three entries reserved for controls of ejection, two entries reserved for the positional checking of band, an exit poiur the stopping of the press.
Principle:
The selection of controls corresponds to the sensors used. With each lathe of crankshaft of the press, the signals of the sensors are considered and put in memory. The cyclic probe (inductive detector provided with the controller actuated by a cam fixed at the crankshaft) makes it possible to question the memory and to stop the press in the event of absence of the one of the signals. The angular position of the cam (cyclic probe) takes as reference the last signal sensor because the PSP 100 has an entry cam. there is defect for the controller if all the signals of ejection or position did not appear before the cyclic signal probe.
Car training:
Controller PSP 100 functions by car-training. Initially to the installation of the apparatus, the PSP 100 will memorize in learning mode the configuration of production. Then, in production mode, it will compare automatically the cycle memorized with the successive cycles and will act in the event of defect.
FEATURES:
Tension: 220 V AC 50 Hz (110 V on request)
Entries sensors: 24 V PNP (NPN on request)
Cyclic probe: Provided M12 PNP
Cyclic probe esp necessary if the press is already equipped with an electronic cam (typeME 8C DIMECO)
|
|
|
|
Controllers and Regulators for specific applications
