|
|
| Products 151 to 180 of 244 |
QUALITY CONTROL SYSTEMS
VISUAL POINT
Control system based upon a data processing microprocessor.
Controls the pressing curve on eight present points of the process stroke.
also available:
CSQ VISUAL: controls the curve by means of an envelop
TRO AUTOMATION: controls the curves of two axis simultaneously
|
|
Box of indicators and alarms, from 1 to 3 stages.
Each stage comes in modules of 8 to 32 channels (96 channels in total).
Each channel can be in simple indicator mode or alarm mode (same functions as the J1900).
It is possible to group together different states of the same organ on the site:
- Start / Stop / "PUMP" alarm.
- Start / Stop / Defrost / "FRIDGE" alarm.
- "BOILER" alarm.
Battery and charger included.
|
|
21Plus! TM Measurement and Control Platform
The newest release of 21Plus! TM, is the very latest technology
offered to the continuous web gauging market. This is the
latest, significantly enhanced release of EGS’ widely installed
21Plus! TM Measurement and Control platform. It takes all the
proven features of 21Plus! TM and enhances them to include
improved operating features and data security features, while
maintaining the safety and security of proven operational
experience.
|
|
|
|
|
|
The Control is a PID controller that makes any solenoid valve "intelligent", the choice of solenoid valve depending on the user's application (from among the 601, Posiflow, Preciflow solenoid valves etc), and on the installation, which may be in a critical environment.
The Control can control 2 loops in the same manufacturing process, whether they are open, closed or double (cascaded). For instance:
- In an open loop: the Control adjusts the valve's pressure or flow rate (without a sensor) by measuring the feedback value.
- In a closed loop: the Control continuously compares the set pressure or flow with the set point thanks to a signal emitted by the sensor. The benefits? Very precise control (hysteresis of 1%) that reacts to external interference
- In a double loop (with 2 sensors): the first loop adjusts the valve's pressure or flow for optimum control, while the second loop returns the signal of the relevant feedback value (pressure, position, force etc). Because the process's response time is integrated into the control process as a whole, the latter is more stable.
|
|
General Description
The D3C and D3D Series directional control valves are high-performance, 4-chamber, direct operated, cam controlled, 3 or 4-way valves. They are available in 2- position and conform to NFPA?s D05/CETOP 5 mounting patterns.
Features
Choice of 2 cam roller positions (D3C and D3D)
Short stroke option
High flow, low pressure drop design
|
|
|
|
|
|
The Control is a PID controller that makes any solenoid valve "intelligent", the choice of solenoid valve depending on the user's application (from among the 601, Posiflow, Preciflow solenoid valves etc), and on the installation, which may be in a critical environment.
The Control can control 2 loops in the same manufacturing process, whether they are open, closed or double (cascaded). For instance:
- In an open loop: the Control adjusts the valve's pressure or flow rate (without a sensor) by measuring the feedback value.
- In a closed loop: the Control continuously compares the set pressure or flow with the set point thanks to a signal emitted by the sensor. The benefits? Very precise control (hysteresis of 1%) that reacts to external interference
- In a double loop (with 2 sensors): the first loop adjusts the valve's pressure or flow for optimum control, while the second loop returns the signal of the relevant feedback value (pressure, position, force etc). Because the process's response time is integrated into the control process as a whole, the latter is more stable.
|
|
LS-C10
Proportional Controller/Driver
The LS-C10 combines a proportional closed-loop controller with a proportional high current driver. Designed to optimize the performance of the LS and M2 valves, the LS-C10's driver can also control other current driven devices.
Features:
* Proportional Gain Adjustment
* Analog Response and Resolution
* 2 kHz Dither with Adjustable Amplitude
* Regulated Linear Current Output
|
|
LS-C41
Hybrid PID Controller/Driver
The LS-C41 is a complete, high-speed, high-accuracy analog PID controller paired with an efficient PWM-based valve driver to maximize the performance of the LS and M2 Valves.
Features:
* Mutiple PID and Feed Forward Options
* "Nested Loop" Control Architecture
* Adjustable Dither Frequency and Amplitude
* Adjustable Dead-Band Compensation
|
|
A feature packed compact Advanced Lubrication Controller for small and medium lubrication systems.
The VIP5 controller has been designed with an extensive set of parameters that offer unrivalled ease and flexibility for controlling and monitoring your automatic lubrication system - from a simple timed system, injector, progressive or dual line system.
Three operating modes have been designed into the VIP5 to offer control possibilities not found elsewhere in single, compact and affordable unit.
No need for many different version of controllers any longer - the VIP5 does it all.
|
|
EPC Servo Controller
EPC is an acronym for Electronic Pump Controller. However it is much more than a simple pump controller. The EPC Servo Amplifier Module is a micro controller-operated component that can be applied to operate servo or proportionally operated pumps and valves. Because of it's onboard microprocessor this unit can perform many additional functions that your typical Servo Amplifier can not. The unit can be configured for several types of control applications including:
- Flow Control
- Flow Control with Pressure Limit
- Flow Control with System Horse Power Limit
- Pressure Control
- Pressure Control with Flow Preset
- Closed Loop Speed Control
- Load Sense Control
|
|
|
The iQpump® controller was designed with the pump service operators and pump system owners in mind. iQpump® offers ease of setup and comprehensive pump and motor protection features. The integrated pump specific software and setup parameters, allow the operator to setup specific control values for a wide rantge of applications. The iQpump® controller will automatically adjust pump operating conditions conditions, as the process variables change while still maintaining optimum pump performance and protection. iQpump® can also replace phase converters when converting from a single phase to a three phase pump motor.
|
|
|
The Axiom is a discrete valve communication & control device for quarter-turn automated valves. The advanced position sensor offers reliable long-life performance with push-button settings that may be made quickly and conveniently. The integral pneumatic pilot valve offers contemporary features which further enhance the operating performance of your automated valve system. And, with the Axiom's rugged construction will withstand your most challenging plant environments.
|
|
|
The Axiom is a discrete valve communication & control device for quarter-turn automated valves. The advanced position sensor offers reliable long-life performance with push-button settings that may be made quickly and conveniently. The integral pneumatic pilot valve offers contemporary features which further enhance the operating performance of your automated valve system. And, with the Axiom's rugged construction will withstand your most challenging plant environments.
|
|
|
The Axiom is a discrete valve communication & control device for quarter-turn automated valves. The advanced position sensor offers reliable long-life performance with push-button settings that may be made quickly and conveniently. The integral pneumatic pilot valve offers contemporary features which further enhance the operating performance of your automated valve system. And, with the Axiom's rugged construction will withstand your most challenging plant environments.
|
|
|
The Axiom is a discrete valve communication & control device for quarter-turn automated valves. The advanced position sensor offers reliable long-life performance with push-button settings that may be made quickly and conveniently. The integral pneumatic pilot valve offers contemporary features which further enhance the operating performance of your automated valve system. And, with the Axiom's rugged construction will withstand your most challenging plant environments.
|
|
LX display has contemporary graphics that are easy to read and navigate, just like the web
For today's personal computer user, the look and feel of Quantum LX is second nature.
The graphical interface is perfect for your newest users, while our advanced interface has detail to satisfy even your most experienced operator.
|
|
|
|
|
|
The PCVisor functions as the heart of a fully networked refrigeration plant, HVAC and BMS system. It provides a fully integrated data monitoring system and displays the information in an easy to use menu driven graphical format.
The PCVisor also provides pack controller optimisation to automatically regulate the target suction pressure of a pack compressor / pack, thereby saving energy.
The unit can be connected to a maximum of 192 controllers (6 networks x 32 devices) using Honeywell Genus® network protocols. The PCVisor permits 2-way communication, in that it can be used to retrieve and log real-time system data as well as providing the capability to remotely configure the network controller parameters.
The defrost timer facility permits sequential defrost control of up to 100 channels, thus encouraging an even spread of energy consumption over any 24 hour period. When using a gas defrost system, header station control can be synchronised over the network with evaporator defrost control thus simplifying the field wiring and maintaining accurate defrost control.
|
|
Features:
-Superior Low Energy Control for Micro Welding
-Ultra Fast Closed Loop Control
-Single Phase Power Supply
-Three Feedback Modes for DC Welders
-Graphical Display and Intuitive DC Welder Monitoring
The UB25 linear DC welder provides unsurpassed levels of control for micro-miniature resistance welding. This DC welder power supply should be used for smaller applications where closed-loop feedback control and fast response times are required. Safety critical applications such as those found in the medical and automotive markets will benefit from UB25’s precision low energy control.
|
|
Low Power Linear DC Welder with Built-in Monitor - UB25
Features:
- Superior Low Energy Control for Micro Welding
- Ultra Fast Closed Loop Control
- Single Phase Power Supply
- Three Feedback Modes for DC Welders
- Graphical Display and Intuitive DC Welder Monitorin
The UB25 linear DC welders (successor to the Unibond II) provide unsurpassed levels of control for micro-miniature resistance welding. These DC welder power supplies should be used for smaller applications where closed-loop feedback control and fast response times are required. Safety critical applications such as those found in the medical and automotive markets will benefit from UB25’s precision low energy control.
|
|
General Description
Profichip’s VPC3+C is a communication chip with 8 Bit Microprocessor interface for intelligent PROFIBUS slave applications. This chip represents an enhancement of the VPC3+B in terms of protocol functions and power consumption.
Features VPC3+C
* Upgrade of VPC3+B, pin and function compatible
* supporting PROFIBUS DP-VO, DP-V1 & DP-V2 protocol
* 4 KB communication RAM
* 5V or 3,3V supply voltage, 5V tolerant inputs
* low current consumption (‹90mA/5V, ‹45mA/3,3V)
* lead-free design available (ROHS complaint)
* PNO certified customer applications
* Package PQFP44
|
|
Features
- Operates on 24 VDC
- Increases daily water output up to 30%
- System starts pumping earlier in the morning
- System stops pumping later in the evening
- Protects pump from low or high voltage conditions
- Terminals for float switch
Boost your DC solar pumps performance by up to 30%. Controller optimizes your solar water pumping system by translating the current and voltage available from your photovoltaic panels, into a combination that is better matched to that needed by the pump. With the optional float switch installed, the controller will automatically stop pumping when the reservoir is full.
|
|
SOLID STATE POWER CONTROLLERS UPMO UPMF UPTO UPTF
SCR Power Controllers to regulate resistive or slightly inductive electric heaters in thermal processes.
Availables in single-phase and three-phase, and two control modes each one with zero-cross and phase-angle firing control.
· Single or 3-Phase operation up to 440 Vac lines
· Silent operation and long cycle life with no maintenance
· Two control modes zero-cross or phase-angle firing
· Currents rates from 45 A to 400 A
· Firing Control by Logical Vdc or Analog 4-20 mA signals
· Refrigeration with cooling fan for high current rates
· dv/dt transient and transitory protection
· Compatible with DESIN temperature controllers
|
|
Features/Benefits:
- COTS Solid State Power Controller
- 10-25 Amp, 28VDC
- Short Circuit Protection
- Overload Protection
- Trip Characteristics to MIL-STD-1760
- Trip status to indicate overload events
- Meets surge and spike requirements of MIL-STD-704A
Description:
The PC605 Series are true COTS, non-hermetic Solid State Power Controllers (SSPCs) designed for use in Power Management and Power Distribution applications. Utilizing the latest technology, the PC605 provides low ON Resistance with complete short circuit and overload current protection. In addition, status output lines are provided for trip condition and load voltage to enable load monitoring and BIT (built-in-test) features.
|
|
|
|
|
|
Watlow solid state power controllers complement the rapid switching required by PID temperature controls and help deliver optimum system performance and service life. Available in 1-phase and 3-phase/2-leg and 3-leg configuration, Watlow power controllers meet most industrial heating applications. Random, zero cross or phase angle fire options match power controller to the application requirement. DIN-A-MITE® SCR power controllers provide a convenient DIN rail mount package in current ratings from 18 to 100 amperes – a good replacement for equal mercury displacement relays. QPAC SCR power controllers rated up to 1,000 amperes for those large process heating applications. POWER SERIES microprocessor based SCR power controllers with ratings from 65 to 250 amperes. The POWER SERIES offers extensive system and heater diagnostics features and agency approvals. SERIES CZR is a CSA, VDE and UL® recognized contactor with ratings from 18 to 50 amperes single phase. Single solid state relays from 10 to 75 amperes. E-SAFETM relay is a 3 pole hybrid solid state/mechanical relay with current ratings of 20 and 40 amperes and is UL®-508 listed and C-UL®. E-SAFE is a good mercury displacement relay replacement in the amperages it serves.
Applications
Semiconductor processing
Plastics processing
Heat treating
Drying ovens
Foodservice equipment
Petroleum/chemical
Lighting equipment
Glass processing
Furnace/oven
|
|
|
|
|
|
With MEROBEL’s new DGT300, Web Tension Control has never been so easy to manage.
The newest Digital Controller from MEROBEL combines, in a smart and low profile front face enclosure, the most simple user’s interface with the most advanced technical features.
Designed for both closed loop and open loop tension control, the DGT300 is the up-to-date turnkey solution for unwinding, rewinding and intermediate tension control applications.
Allowing 100% setting up through its user’s friendly Windows PC interface, or through its front panel keyboard, the DGT300 includes all the requested web tension control specific functions : E-stop, soft start, hold & release, taper tension, no-stop splice turrets. Analog set point input is also available for using distant remote control with PLC analog output or potentiometer.
Allowing direct input of position sensors, US sensors, or any kind of load cells technology signals, the DGT300 design gives the benefit of fully digital calibration procedure as simple as 1-2-3 (no switch, strap, or resistance).
|
|
From 1992, over 3000 MW.90.10 systems have been installed, solving numerous tension problems in conjunction with Load Cells, Dancing Rolls, or Sonar.
The real news, however, is that the Microprocessor MW.90.10 is the first system to allow open loop control of mixed systems using one common control. Load Cells and Sonar, Dancing Rolls and Sonar, and Load Cells with Tacho Generator.
The high standard of design ensures the function reliabiiity, repeatability, and precision of the Display values.
Personalised operating parameters are stored in the Microprocessor's memory, which can be recolled easily, speeding up machine changeovers and so increasing productivity. Easily calibrated, small in size yet high in quality and performance, the MW.90.10 offers excellent value.
|
|
Conveyor Tracking and gripping from a running conveyor is already one of the most important applications in industry.
With the Epson conveyor tracking you are able to arbitrate several conveyors parallel, either with a camera system or without one.
|
|
The Wichita Altra Easy Tension Controller offers probably the most versatile tension control system on the market today. Whether your interest is as system integrator, maintenance production, or quality control manager, the powerful tools will be of benefit to all.
The intuitive Windows based software suite provides powerful diagnostic, management and data logging tools. Graphical PID tuning makes light work of commissioning.
Designed in association with TTS, this controller may be configured to control tension on unwind stands or winders working with any electric or pneumatic brakes via appropriate drivers. The one unit interfaces with load cells, dancers and diameters measurement devices as well as handling splicing.
|
|
|
|
|
|
VOLUTRONIC® - that means high-dynamic, precise volume and flow measurements, evaluated according to the application - from a simple display unit to an intelligent micro-controller solution.
The basis for all this is the KRACHT gear type flow meter. This flow measure product presents the successful result of our long-experienced engineers. The sophisticated tooth system geometry in connection with application-specific bearings are made for the gear type flow meter being an absolute "All-rounder". The gear type flow meter covers a wide medium range: to go from hydraulic oil to printing ink, from gear grease to water based lacquer. The highly-efficient KRACHT electronics take the signals given by the gear type flow meter and ensures that processes are exactly monitored, regulated and controlled.
For example, in process technology as micro-controller for metering and mixing systems, or as flexible measuring and recording electronics for differentiated applications in test bench technology. KRACHT know-how guarantees functional solutions - standardized and optimized for application.
|
|
|
|
Controllers and Regulators for specific applications
