|
|
| Products 91 to 120 of 245 |
Advanced Control Features:
- Displacement and force monitoring
- Force control
- Envelope function
- Combo mode
- Energy and time limits
The HF27 High Frequency Inverter precisely controls and monitors electrical AND mechanical weld parameters. Miniature welds are highly sensitive to small heat profile fluctuations in the resistance welding process. Overheating deforms and destroys parts, while under heating results in a weak, unacceptable bond. To achieve consistent, reliable welds of small to microminiature parts, precisely controlled heating is required. This necessitates superior control of the energy output.
|
|
|
|
|
|
Interlock control system
A plug-in modular system for linking up to 10 doors, or up to 10 groups of doors to create an interlock system.
No complicated control system required as dependencies are set on site with DIP-switches at each control module. The system allows for easy expansion.
Quite often one of the requirements of clean-room technology or laboratories is, that certain doors may only be opened ifothers are closed. The DICTATOR interlock control system is the idealsolution to link units of up to 10 doors.
The dependencies between different doors are programmed directly in the
respective control modules on each door using a very easy adjustable matrix control system. This is done with DIP-switches representing the different doors. The dependences / linksnbetween the doors can also be changed on site at a later stage, not requiring any special programming
know-how. The interlock control terminal is provided with a potentialfree make-break contact. This permits e.g. to pass on the information on each door to a central control system.
The DICTATOR interlock control system is a modular system and therefore
extremely flexible and easy to adapt to different sizes of door units and
requirements.
|
|
Characteristics
0 to 200Hz output frequency
V/f control with several preset and one user definable V/f patterns
Very low audible motor noise thanks to the optimised PWM control
Built in DC reactor and dual diode input (12 pulse) for harmonics reduction on models of 22kW and above
Intelligent energy saving function
Integrated PI controller with HVAC dedicated functions
High Slip Braking (Can reduce the deceleration time without using a braking resistor)
Very smooth speed search function working in both directions
Available Communications options:
- DeviceNet
- Profibus-DP
- Interbus-S
- CANopen
- LONWorks
Integrated RS-422/485 port for Memobus communications
HOA operator (optional)
CE, UL, cUL and German Lloyd compliant
|
|
|
Yaskawa is the largest global variable frequency drives manufacturer with over 30 years of Building Automation System (BAS) and HVAC experience. Our variable frequency drives are designed for HVAC applications, which include air handlers, cooling towers and pumps, by combining reduced size and cost with step changes in performance and quality. The drive features for Building Automation Systems include extensive parameter selection which simplifies management of BAS applications for energy efficiency and closed loop control, industry-standard Hand/Off/Auto functionality, an internal PI controller and a Sleep function. Because all variable frequency drives (VFDs) are rigorously tested, Yaskawa ensures that quality and reliability are designed and built in.
|
|
Controller of organic irrigation for the dosage of up to 6 different products. In addition, Controller 3000 allows to in line manage the most important parameters in an irrigation system: volume, pH, conductivita, pressure and the activated sectors of irrigation.
It has a port USB to the direct communication to PC and other to transfer the historical information of configuration, programming and to a memory type USB (pendrive).
|
|
|
|
|
|
HI 10000 Fertilizer Injection Systems precisely monitors and controls fertilizer concentrations and pH for all types of greenhouse and field agricultural irrigation applications. Unlike flow-driven systems of the past, the HANNA Fertigation System continuously measures the actual EC and pH of the flow-through, and precisely adjusts the concentration of fertilizer into the system. The HANNA System is a bypass system which will not interfere with main line flow and thus does not impede line flow or pressure. This unit will accurately inject fertilizer in flow rates ranging from 5GPM to 300GPM.
HI 8000 Series Controller included with the system has 10 programs that allow the user to set various EC and pH values for a variety of plants. Each system allows the injection of a single fertilizer and 1 minors or (mild) acid. If preferred, each fertilizer injector can be set to a specific percent, allowing customized fertilizer mixtures from salts of the basic elements N-P-K, providing a considerable cost savings.
The HANNA Fertigation System also controls up to 8 irrigation valves (either sequentially or in groups of 2, 3, up to 8 at once) for complete automation of the fertigation process. Programs can be triggered by time, external switching, and/or flow, (e.g. spot watering - timer adjustable). HI 8000 is also capable of controlling an external agitator, handy for mixing fertilizer solutions. A backflow control allows the filtration system to be flushed and cleaned. Alarm controls and redundant monitoring help reduce error and unexpected events. This system can be synchronized with a GSM module which allows for remote monitoring and control from a PC.
|
|
|
The UC-2000 Universal Laser Controller provides an easy user interface for total control of laser power, duty cycle, and modulation frequency. Power control is achieved by pulse width modulation (PWM) at selectable clock frequencies of 5, 10, and 20 kHz. Compatible with Synrad's entire line of CO2 lasers, the all-digital UC-2000 features an easy-to-read LCD screen and easy set-up. Available in standard or rack-mountable packages.
|
|
|
|
|
|
General description:
The SurfBoard-USB is a fully featured board, which provides reliable performance for controlling and synchronizing I/O, 2 and 3-axis scan heads and virtually any laser. The board can operate from any PC platform with a USB port - including laptops and embedded PCs. Gone are the days of opening a bulky desktop to install a board or worrying about address or IRQ conflicts. The SurfBoard-USB is a truly plug-and-play product.
Measuring only 10x10cm, the SurfBoard-USB operates with Windows XP / Vista on NTI's industry leading WaveRunner laser / scanner control software. Your laser scanning system will not be waiting for data with the incredibly fast USB 1.1 or 2.0 PC interface and the 10 micro second laser / scanner update rate. The board includes on-board flash memory to store large jobs, plus 6 inputs and 6 outputs used for automation and a pointer control, mark-in-progress signal, start mark signal, and mark-on-the-fly encoder inputs. Scan head control is through an industry standard XY2-100, 16-bit digital interface or an optional analog interface. Laser control is provided via standard PWM, analog or 8-bit digital signals.
Each board is packaged in a small, rugged enclosure, which can be remotely mounted to facilitate easy system installation. And don't worry about losing your software dongle, because with the SurfBoard-USB, there is no software dongle required.
|
|
Laser Controller
The Laser Controller LC201 is the control- and operation-module for all of the Taufenbach laser systems.
The power and the frequency of the lasers can be adjusted.
The system is provided with a key switch, an emergency switch and inputs for external interlock circuits so that laser systems complying with the demands of laser class 4.
The housing is designed as a 19“-rack-mountable package.
- For all Taufenbach Lasers
- Laser class 4
- Power control - adjustable from 0 to 100 %
- Frequency control - adjustable from 1 Hz - 100 kHz
- Key switch
- Emergency switch
- 2-channel interlock
- Small rack-mountable package (19”)
|
|
The Vitesse family of laser drivers are production-proven and include variants optimized to each of the optical module applications.
Key Features
- Built-in support for IEC-60825 eye safety (VSC7964, VSC7966, and VSC798x)
- Duty cycle, output modulation, and output bias level controls (VSC7980, VSC7981, and VSC7982)
- Programmable output data eye crossing point (VSC7983 and VSC7984)
- Integrated limiting amplifier (VSC7964 and VSC7966)
- Internally stabilized modulation and bias outputs (VSC7983 and VSC7984)
|
|
|
Microprocessor core modules are compact, powerful control devices for embedded applications that require I/O control, data handling, and peripheral connectivity.
|
|
- Basic function: issue an alarm notification e.g. for leakages or overfilling
- LED indicators for: Alarm - Ready - Stop
- Probe cable supervision: in the case of damage or interruption in the probe cable, the "Stop" state will be entered
|
|
|
|
|
|
VOLTAGE CONVERTERS
Voltage converters are specially designed to supply and control lifting direct current electromagnets of any power and simultanious supply of several electromagnets with summary current not exceeding allowed values.
Peculiarities:
1. Increase of the electromagnet service life perod owing to the high-speed election protections and emergency alarm in the course of operation.
2. Overvoltage is missing during recuperation and demagnetization.
3. Continous voltage adjustment, opportunity to separate materials moved by a conveyer.
4. The output increases due to growing in speed of a current buildup and dropping in an electromagnet.
5. Universality - they are intended for the iron separators with 100% duty cycle rating.
6. Alphanumeric display of the running parameters, operating regimes and emergency messages.
7. Sound emergency alarm.
8. Small weight and sizes allow to place a changer of series PN-500 proximately in the crane-s cabine in any place suitable for an operator.
9. At the request of the customer the control system is completed with the remote board.
10. High reliability is achived through a new element base and original designs covered by Russian patent law.
|
|
Hubbell Euclid™ Magnet Controllers utilize heavy duty components and circuitry arranged to provide optimum control of your lifting magnet. Full featured NEMA Type 1 or 3R enclosed magnet controllers are available for immediate shipment. Of course, we welcome inquiries for custom applications as well.
|
|
SKF Magnetic Bearings offers the world's lowest cost, most capable, magnetic bearing digital control systems with features adaptable to your specific needs. Controllers range in size and power to match the dynamic load requirements of your application.
At the core of each controller is SKF's advanced DSP elelctronics and control software. Product testing across numerous applications and customer environments has shown a high degree of user friendliness and reliability.
We have a complete power range to suit nearly any application. Our smallest starts at a compact 2 amps/40 volts for the most sensitive machines with light dynamic loading. Our smaller controllers also include an integrated motor drive for brushless DC motors.
For heavier industrial machines the system scales up to a powerful 50 amp/200 volt system with intermediate sizes along the way.
|
|
|
It is an easy, sturdy and practical manual panel for generating sets control. It is easy for inspection. It is made in a metal box. It is provided with anti vibrating camping pads. It can be directly connected to the alternator.
|
|
|
|
|
|
|
VM20 is a modular, multipurpose measuring and test system for grinding machines easily programmable by the user. Available as independent unit or for rack-mounting, equipped with local hardware or remote operator panel as well as with Windows Software panel, digital I/O logic interfaces, Profibus and RS232. The wide range of grinding wheels balancing devices, with or without embedded acoustic sensors, applicable on single or multiple grinding wheels or long grinding wheels, allow to automatically and rapidly reduce vibrations which generally cause errors and imperfections on worked surfaces. The wide range of AE transducers configuration available, with assembly both on rotating and stationary machine components, can be used to monitor the machine conditions, through FFT analysis, and to determine the grinding wheel position when it contacts the piece to be worked or the tool-dresser. During working, diameter and roundness gauges, as well as the pieces positioning gauges, allow to achieve a constant production quality together with a cycle time improvement, thanks to correct feeding speeds for roughing-out and finishing.
|
|
The CoMo Injection process monitoring system Type 2869A allows zero-defect injection molding production by analyzing the cavity pressure curve.
A bright 12.1" color touch screen monitor Type 5629A3 makes operation of the CoMo Injection system even quicker and easier, and accelerates communication with the system. The new IP Setup Program now being supplied with the system allows simple automatic detection and configuration of CoMo Injection units installed in production.
Version 2.0 of CoMo-MIS Type 2829A…, the database system for storing measured and calculated process data, is now also available in the four languages mentioned above.
All of the CoMo Injection and CoMo-MIS systems that have already been installed can be updated with the latest version. The IP Setup Program works with all CoMo Injection units equipped with Version 1.2.
|
|
Advanced Tiny Giants
The integrated products of the ALPHA family replace many of the discrete components used in conventional systems, opening up a whole new range of possibilities for economical solutions.
Alpha XL
• Extra large program capacity (200 program blocks)
• Output module with 2 analog outputs
• For outdoor applications down to -25°C
• Extra large backlit display and additional HMI functions
• Additional communications capabilities
(including e-mail and SMS)
• DFC radio and clock signal interpretation
Alpha
Up to 64 functions (or 1.5 kB data) can be processed by a program. Each of the available functions (timers, counters, analog processing, calender/clock function etc.) can be used in all programs as frequently as needed.
|
|
Advanced Tiny Giants
The integrated products of the ALPHA family replace many of the discrete components used in conventional systems, opening up a whole new range of possibilities for economical solutions.
Alpha XL
• Extra large program capacity (200 program blocks)
• Output module with 2 analog outputs
• For outdoor applications down to -25°C
• Extra large backlit display and additional HMI functions
• Additional communications capabilities
(including e-mail and SMS)
• DFC radio and clock signal interpretation
Alpha
Up to 64 functions (or 1.5 kB data) can be processed by a program. Each of the available functions (timers, counters, analog processing, calender/clock function etc.) can be used in all programs as frequently as needed.
|
|
|
ITC manufactures and sells a wide range of electronic equipments for dosing pumps control. From equipments that control the CI, RedOx, pH and EC to Fertigation Controllers with automatic pH regulation and the fertilizers in the irrigation water.
|
|
|
|
|
|
BL 931700 mini pH controller has been designed for easy, affordable installation in tight spaces to perform simple yet effective process control. As a result of its compact size, BL 931700 can be installed right next to tanks or vats.
This versatile controller is ideal for a wide variety of applications, such as textiles, papers, photographic solutions, plating baths, chemicals and water treatment.
BL 931700 is provided with a selectable setpoint for acid or basic dosage. Measurements are directly acquired from a pH electrode in the range from 0 to 14 with a 0.01 pH resolution. Accuracy is ensured by the 2 point calibration, performed manually through trimmers on the front panel. You can also choose automatic or manual dosing mode with a switch on front panel. Manual control is particularly useful during maintenance operations, because it permits you to enable or disable the dosing relay according to your need.
The overtime control system advises you when the relay is active too long, helping to prevent overdosing. In addition, this model features a 4-20 mA analog output for recorder connection.
Two models are available, with different power supply input at 115/230 Vac or 12 Vdc.
|
|
Freelance 800F - The compact solution ABB's Freelance 800F control system combines easy engineering with an open, modern system architecture. Freelance 800F is proven in more than 14,000 applications - in all industries.
The compact control system allows the integration of all common fieldbuses, leaving the user to select any they wish - whether FOUNDATION Fieldbus, PROFIBUS, or HART.
The system was and will be continously improved and enhanced to meet our user's needs. Customers choosing Freelance 800F can rest assured that ABB will support them in the long term.
The new AC 700F controller has just been released. In addition, new Information Management functions are available via PGIM 800F, our new Information Mananagment option.
|
|
|
Automatic reversers of source: monitoring of single-phase or three-phase lines, monitoring of emergency request of the generators, monitoring of the contactors, circuit breakers or switches motorized, recording of the events, measures true effective value, monitoring and remote control by microprocessor, ports RS232 and RS485, Modbus-RTU communication protocols and Modbus-ASCII, ticket machine.
|
|
|
|
|
|
The CoMo Logic is a y(t) control monitor with three real-time thresholds and elementary post-cycle curve analysis function. The following operating modes are available: 'GRAPHIC’ for displaying the y(t) signal characteristics, ‘TREND’ for displaying the last 118 peaks of the cycle and ‘PEAK’ with numerical display of the cycle peak.
By their web server functionality, CoMo Net and CoMo View are directly connected to the TCP/IP world. Many functions and information can be operated and viewed via familiar browser functions from any point worldwide, of course protected by security precautions and access authorization. A central storage of quality data from larger, complex production lines is significantly simplified and a cost advantageby use of an existing network structure . Also remote maintenance and diagnosis enable fast, qualified and cost-effective on-site help during servicing.
The dependent measurands, for example press force and displacement are recorded and their functional dependence is evaluated. The evaluation result can reject bad parts for reworking or classify production into different tolerance classes.
The CoMo View is equipped with an integrated 5,7" Touch Color-Display of 320x240 pixels. Possible connection of piezo, strain gauge and voltage output sensors as well as potentiometric displacement and angle sensors make this two channel control monitor versatile for most any application. Real-time capability is given via digital I/Os and a fast export of process data and measured curves add significantly to a safe process monitoring even at high cycle rates.
|
|
|
The PowerDetector senses, whether the drilling-/ grinding-/ or welding machine, etc. is in use, and it opens a damper and/or switches on the fan. A lower energy consumption and savings on the heating bill are direct results of using the PowerDetector, because the system is only activated, when it is necessary. When the system is switched on automatically, the use of the spot extraction system will also increase, and thus a more productive and environmentally conscious working place is obtained.
|
|
Selettra Controller
The control unit combines its compact dimensions with a series of innovative functions, finalized to improve the level of precision on the selection, to monitor continuously the selector's dynamics and to program automatically their machine configuration by software.
|
|
Modern automation, control and remote control systems have become essential for optimized and secure control and monitoring of processes regarding energy distribution and industrial networks.
Depending on the specific field of application, different requirements have to be met by the devices regarding
- Various intputs and outputs
- Process signals
- Environmental conditions
- Communication and transmission technology
- as well as essential logical functions
|
|
Industrial PC-TFT :
Industrial PC-TFT 5,7" and touch screen display
Data input via:
- Touchscreen
- online
- Network
- Memory stick
- Barcode scanner
- Optimisation program and waste piecemanagement
|
|
|
The VS-626M5 is a highly reliable AC vector controlled inverter drive designed for controlling high speed, compact AC motors used in machine tool spindle drive applications. Vector controlled technology through the use of a digital signal processor and proprietary algorithms for speed, torque, and current control allows for minimum speed and torque variations during cutting. This impacts accuracy and surface finish of precision parts. 100% back-to-line power regeneration provides quick spindle deceleration times not limited by the ohmic value of externally mounted regeneration resistors. This allows for faster tool changes and increased machine productivity.
|
|
|
|
Controllers and Regulators for specific applications
