|
|
Wall Clocks
Ex-Time 40 - Intrinsically Safe Wall Clock
For precise time in Ex-hazardous areas.
Features :
Quartz movement
Robust metal housing
Simple daylight saving
|
|
Programmer Calendar Master clock RTCP offers 4 main functions:
- time and date display.
- synchronization of slave clocks
- weekly programmer for ringing and starting up of equipment
- annual programmer for national holidays and vacations.
LED display is legible up to 20 meters. Automatic and programmable Daylight Saving Time. The time base and programmes are equipped with a lithium battery as reserve power supply, ensuring memorization during more than 10 years.
Radio Timing and Radio Timing Network broadcast by Hertzian waves 869Mhz complete time information to the analogue, digital clocks and programmers. No cabling is required for this solution.
Radio Timing 4000 is a modular time center which can be adapted to satisfy the user's expansion needs and security level. Power supply, synchronization inputs and outputs are all redundant.
|
|
|
Mechanical control knobs are handy adjustment units with an integrated measurement system for variable mounting situatuions. A reduction gear enables a extremely fineresolution tracking and precise absolute depiction of adjustment values directly at the measuring point.
|
|
Models: 14G and 27G
Figures: 4
Size of Figures: 4 mm
Resetting by knob.
Counting of persons, parcels, trees, cattle and any type of pieces in factories... etc.
Model 27G With base to place on the table.
Model 14G available also in green, yellow, black and blue colors.
|
|
The model shown is the basic unit, variations are available to special order. All models are robustly constructed for continuous operation at high speeds with the main shaft running in double oil impregnated bearings to ensure accurate, long term, trouble free service.
• Top viewing (front viewing models are available).
• 6 digit 6.4mm character height (0.25in) readout.
• 6.35mm (0.25in) diameter drive shafts.
• Up to 3000 counts per minute with 1:1 gear ratio.
• 1:1, 1:10, 2:1, 3:1, 4:1 gearings as standard.
• Customised gearing available on all models (but some gearings may have fewer digits on the readout).
• Reset to zero and non-reset models available.
• Reset by lever, or cylindrical lock and key.
This counter can be driven from either or both sides. All resettable models can have the reset
lever on the left or the right. A non-reset model is also available.
|
|
LEDI WORLD TIME ZONE CLOCK
LED digital clocks
GORGY TIMING propose a large range of time zone clock, allowing the display of the different time zone in the world. Hour, minute, analogue circle second displays.
The LEDI clock range comply to the EMC directive 98/366 including directive 93/68, EN 55024, EN 55022, EU 60950
Versions :
- Radio synchronized on France Inter or DCF77 transmitter
- AFNOR NFS 87500/IRIG B
- 869MHZ wireless (DHW)
LED lamps colour
- Red
- Green
- Yellow
Case
- Wall mount surface IP20
Power supply
- 230VAC
- 115VAC
- 48VAC
|
|
Easy control of count, time and rate using serial interfaces.
- 48 x 48 DIN-Housing
Typical applications are:
- Timing
- Positioning
- Rate monitoring
- Saw machines
- Cable-cutting machines, loading equipment, specialist machinery
|
|
Description of the programmable, variable and electronic preselection counter GEL 104:
The counter works as coincidence counter. i.e. the output signals (Out 1, Out 2) are activated when the preselected value is reached. Depending on system parameter programming, a monostable and also a bistable signal is available (20 ms, 50 ms, 100 ms, 500 ms, 1s). Resetting to zero or to the set value is achieved manually via the keyboard, electrically via the reset input or by programmed auto-reset.
Important: In the event of a bistable Out 2 -signal, resetting can be achieved only via the keyboard.
* many different control and counting functions programmable
* multiplier for actual-value adaptation programmable
* safe against mains failures
* input frequency up to 40 kHz
* two preselects and one set value
|
|
Preset / Predetermining Electronic Counters
Our rugged and compact Veeder-Root, Dynapar and Eagle-Signal brand electronic counters are the first choice for economy, accuracy, and fast resetability. Our wide variety of totalizers (Totalizing, Predetermining/Preset Counter, Batch Count, Programmable Setpoint Controls and Alarms) can control an external circuit when its counted total matches a user-entered preset limit.
|
|
|
Programmable counters (preset counters or count controls) are counters that provide output signal(s) at preset count value(s). Typical applications include cut-to-length, batching, filling, mixing and dispensing. Available from Eaton are a variety of count controls in different sizes, display types and feature sets.
|
|
CM78 is a microprocessor-based counter/display.
Provided with several different software versions, CM78 performs a long series of functions: from the simple display preset values up to the partial/total counter with double preset.
The new version called CM78N includes three different functionalities in one unit, with a range of settable parameters which allow to tailor it for applications on any kind of operating machine.
|
|
Suitable for a wide range of pulse inputs such as magnetic pick-ups, proximity sensors, photoelectric sensors and flowmeters. The 877X is a versatile unit suitable for many speed or process time indication and control applications.
• 14.2mm character high visibility LED display.
• 1/8 DIN (96mmx48mm) bezel.
• Fully programmable.
• Programmable display update time 0.1 to 99.9 seconds.
• Display scaleable to show engineering units.
• (TAU) process time indication.
• Programme lock out facility.
• AC and DC powered models available.
• Analogue re transmission option.
• Dual relay output option.
• RS485 communications option.
• CE approved. (UL and cUL pending).
|
|
|
|
|
|
Symmetricom's model 700™ Miniature Time Code Generator suits applications where compact size, light weight and ease of operation are required. Generator time is set automatically using the IRIG B synchronized generator input. Internal batteries enable the generator to output IRIG B time code even if power is interrupted for up to ten hours. The time base of this self-contained unit is maintained by a precision crystal oscillator. A small alphanumeric display provides instant visual feedback of the 700's operation. Options are available to add video time insertion, other time codes, or parallel BCD output.
Standard features include an IRIG B synchronized generator input for rapid synchronization to a master generator. This feature makes the 700 ideal for flightline or remote field applications. IRIG B serial time code (1 kHz amplitude modulated carrier) is output via an SMA connector to drive data recorders, remote displays, or other peripheral timing instrumentation.
The 700 operates on 10.5 to 32 Vdc input via a 6-pin MS connector. A locking toggle switch turns power on/off. Once power is "on," synchronization to an external IRIG B input code is automatic. A red LED lights when power is on or if the 700 system is not locked to the input code, and a green LED lights when input code synchronization is complete.
|
|
The Tekron TCG01 GPS Clock provides a time synchronization solution with superb timing accuracy (better than 100 nanoseconds to UTC), designed for synchronizing multiple industrial control and SCADA devices, including protection relays and remote telemetry units.
Outputs are electrically isolated allowing outputs to feed directly to areas with different earth potential zones without compromising the overall site earthing security.
|
|
Based on Tekron’s industry leading GPS Clock the TCG 01, the TCG 08 consists of
two GPS Clocks in one 19” rack mount case. Each clock has multiple isolated outputs and independent power supplies, displays and antennas. The TCG 08 provides a fully redundant system to ensure uninterrupted operation 24/ 7.
Imbedded in the heart of the TCG 08 is the BISA algorithm. In the event that a clock loses satellite reception, BISA enables the clock to automatically synchronize to either the alternate clock or to an outside sync source to maintain time accuracy. The TCG 08, like all Tekron clocks, also supports IEC 61850.
|
|
Compliant with Joint Chiefs of Staff 2006 SAASM GPS mandate and developed for authorized military users only, Symmetricom's XLi SAASM GB-GRAM Time and Frequency Receiver is the world's most powerful, accurate and versatile Selective Availability Anti-Spoofing Module (SAASM) based GPS time and frequency receiver.
The XLi SAASM's GB-GRAM receiver is a third-generation GPS PPS, 12-channel receiver. The internal Ground-Based GPS Receiver Application Module (GB-GRAM) complies with the U.S. Government's GB-GRAM program that fulfills a GPS Wing initiative to migrate to a defined, open system architecture for ground-based embedded military applications.
|
|
|
|
|
|
AALBORG®'s compact TOTALIZER is designed to be used primarily
with mass flow meters and mass flow controllers.
It can also be used in conjunction with
other types of instrumentation with 0-5 Vdc signal
outputs.
The TOTALIZER takes analog output flow signals of
either 5 to 10 Vdc from GFM mass flow meters
and GFC mass flow controllers, or 0 to 5 Vdc from
AFC mass flow controllers, AFM mass flow meters
and other compatible products (jumper selectable).
The TOTALIZER integrates and accumulates up to 7
digits of direct engineering units for the given gas
and flowrate (i.e. standard liters, standard cubic
centimeters.
In order to reduce low signal (noise) totalizing, provision is made for 1% cut off.
A built-in battery back-up holds the total reading
for up to 20 years.
The TOTALIZER can be connected to GFM mass flow
meters or GFC mass flow controllers via either a
modular jack replacing the LCD display or with an
additional connector in parallel with the LCD display.
SPECIFICATIONS:
Input Analog Range: 5 to 10 Vdc/0 to 5 Vdc optional.
Power Consumption: 10 mA at 12 Vdc, less than 0.125 watts.
Accuracy: ±0.5% of full scale.
Temperature Stability: ±200 ppm/ºC in the range of 5º C to 50º C.
Display: 7 digit, 8mm figure height.
|
|
- Your choice of LED and LCD Counters
- Miniature and industry standard counters
- Shock proof versions
- Magnetic field proof versions
- Extremly low power consumption
- kWh counters
|
|
Veeder-Root Electronic Timers & Counters
" The Best Known Name in Electronic Timers & Counters™ "
Profile:
Veeder-Root™ - For over 100 years, no other company offers a broader selection of counters. Veeder-Root, the best known name in counters, offer rugged and economical electronic, mechanical and electromechanical counters, including totalizing, preset and predetermining counters as well as diverse process and rate indicators, for non-stop performance and production monitoring in industrial manufacturing applications. Veeder Root was acquired by Danaher in 1989, but the V-R counter products were then re-aligned under the Danaher Industrial Controls Group business segment beginning in 1991 and is supported by an entirely separate sales channel from the Veeder Root tank gauge and fuel management division.
|
|
Totalizers are the simplest and most common type of counter, used in a variety of applications where accurate totals are needed, including counting the number of parts produced, amount of material used, or the number of machine cycles occurring.
|
|
The 7010 and 7016 are two counters based on the same miniature self powered totaliser. Both counters come ready for fitting and feature flying leads for connection to remote contact closure input devices.
- Self powered for 3-4 years using a 1.5V button cell.
- 4/6 digit 6mm character high contrast LCD display.
- Low power CMOS circuitry to achieve an expected battery life of 3 to 4 years at 20°C.
- Simple to install.
- Integral de-bounce circuitry.
- UL and cUL approved.
The counter increments when contacts are opened. They may be panel mounted with the optional bezels supplied.
|
|
General description :
An electronic counter that's ahead of its time! This top of the line multi-function, counter has 140 combined operating configurations and standard or high-speed count modes. Available with pin or screw terminals, it has a 2-color backlit LCD display, waterproof front panel, four signal inputs, and relay or solid-state outputs.
|
|
|
Panasonic offers a versatile line of counters and hour meters to meet just about any application need. Panel mount or PC board mounting are available. These products are of the highest quality and offer our customers an outstanding value. Click on a product below to discover how our solutions can seamlessly conform to your applications requirements.
|
|
| ... products without technical information |
| |
|
|
Counters, Totalizers
