|
|
Stacker LB 931 - Plate Handling System
The Stacker unit LB 931 will complete the Mithras LB 940 and TriStar LB 941 multimode plate reader models and the Twinkle LB 970 fluorometer in terms of throughput. These instruments can now be used as a stand alone unit, equipped with the new 25 or 50 plate stacker or can be integrated into the Berthold BUTLER LB 930 or any other robot system.
|
|
FEATURES
- High Speed: 8 second transfer times
- Scalable System: Integrate to various Velocity11 and 3rd party devices
- Storage Options: 2, 4 or 6 stacks handle up to 360 standard plates
|
|
FEATURE
- Unique eight plate position, small footprint design
. Space savings for all applications
. Seamless integration into a variety of Velocity11 and third party automation systems
- Simultaneously pipette while other plates changed
. Impressive throughput and significant reduction in assay time
- Pipetting range of 100 nl to 200 ul
. Save on costly reagents and compounds
. Miniaturize your assays with confidence
- Pipette Heads are easily interchanged in < 2 minutes
. Flexibility: One system can scale to handle a variety of applications
. No service person required for a head change.
|
|
FEATURES
- Fast
. High throughput plate stacker is faster than most robotic arms in typical applications
- Small Footprint
. Compact size allows for multiple stackers, increasing speed and efficiency
- Smart Design
. Automatically checks for correct plate type and orientation
- Variety of Storage Racks
. Your choice of sizes in low cost storage racks
- User Interface
. The VStack is intended to be routinely used for automated runs controlled by platform software. If you are using Velocity11's BioCel, the platform software is VWorks™ automation control software. If you are running the VStack in a system developed by your own organization, the platform software will have been custom-written using a program such as C++ or Visual Basic and Velocity11's ActiveX software
|
|
|
|
|
|
Biochrom Asys Atlantis Microplate Washer
The Atlantis microplate washer combines ease of use and excellent performance for both absorbance based and luminescence based assay procedures.
Superb wash performance with a minimum residual volume of less than 1.5 µl/well. The built-in software is easy to use and has 20 different cycles, 50 diferent procedures and can run many different plate types.
-Two manifolds as standard.
-Quiet operation- no noisy vacuum pump.
-Built in safety features include aerosol protection and emergency stop.
-3 different manifolds (wash heads) available 8, 12 way for 96 well plates and 16 way for 384 well plates.
-Two configurations of liquid lines are avalable, Atlantis 2 allows users to use two bottles and Atlantis 4 is ideal for applications requiring up to 4 wash buffers.
-Optional liquid level sensors.
-Optional extra manifold
The Atlantis is a reliable microplate washer designed for laboratories running microplate based applications such as ELISA and requiring a quiet efficient solution to washing microplates.
See www.biochrom.co.uk for a video demonstration.
|
|
Biochrom Anthos Fluido 2 Microplate Washer
The Fluido 2 microplate washer combines ease of use and excellent performance for both absorbance based and luminescence based assay procedures.
Superb wash performance with a minimum residual volume of less than 1 µl/well. The built-in software is easy to use and has 20 different cycles, 50 diferent procedures and can run many different plate types.
-Two manifolds come as standard.
-Quiet operation- no noisy vacuum pump.
-Built in safety features include aerosol protection and emergency stop.
-3 different manifolds (wash heads) available 8, 12 way for 96 well plates and 16 way for 384 well plates.
-Two configurations of liquid lines are avalable allowing users to use two or four bottles- ideal for applications requiring up to 4 wash buffers.
-Optional liquid level sensors and warnings.
Excellent washing performance, quiet operation, reliability and attractive pricing make the Fluido2 an ideal choice for Enzyme Immuno Assay (EIA) applications.
|
|
|
|
|
|
CELLROLL and CELLSPIN ¨C The cell cultivation system that grows with your needs
CELLROLL is a modular instrument for cell cultivation in roller bottles allowing fine tuning of rotation speed. The modular design makes a flexible production scale-up possible: depending on the needs, one motor unit can control up to eight bottle racks, each rack accommodating two standard roller bottles.
CELLSPIN is a moisture-resistant stirrer for cell cultivation in spinner bottles with volumes from 100 to 1000 ml. It offers a wide range of stirring options that can be individually programmed at any time for accurate optimisation and control of culture conditions. The spinner flasks - available in the four sizes 100 ml, 250 ml, 500 ml and 1000 ml - improve the performance of your cells thanks to their "cell-friendly" design.
The CELLROLL and CELLSPIN systems are based on a modular assembly concept that allows configuring and combining the two instruments. One control unit operates two CELLROLL drive units or two CELLSPIN stirring platforms or a combination of one instrument each. The programmable control unit is located outside of the incubator. In case of power failure or accidental disconnection of control and motor unit an alarm system is activated.
Special features:
- Modular and flexible
- Durable: non-corroding and sealed, removable control unit
- Cultivation success: gentle moving
- No heat transfer to cell suspension
- Process security and data recording
|
|
The Triathler luminometer is a compact, portable, manual instrument for measuring
samples in various vial sizes up to 20 mL in volume.
Key characteristics:
• Large dynamic range, (200 CPS to 50,000,000 CPS)
• High sensitivity, 0.6 10-15 mol/ml ATP
• Portable or regular laboratory use
• 32 character alphanumerical display
• RS-232 port to send out results to a PC or a printer
• Software for MS WindowsR to download the results to file or MS Excel worksheet is included
• 1.5 " head-on PM tube makes very high counting sensitivity possible
|
|
|
The BioCube System EX incorporates a 6‐axis robotic arm. It can be used as a stand‐alone system for integrating devices in a self‐contained protocol (for example, loading plates from a CO2 incubator into a fluorometric imaging plate reader system). It also can be mounted on a rail. As with the BioCube LX and SX modules, the design of the EX emphasizes versatility and reliability.
|
|
|
|
|
|
RTS A3 is a compact and space efficient automated sample store; an ideal sample management solution for organisations from large pharma to academia.
With the highest density storage in its class, A3 operates from ambient to -20degC and delivers reliable, high integrity automated sample management, through its combination of industrial quality robotics and proven RTS sample tracking and ordering software.
A3 has a high level of flexibility, can be easily installed either in modules or as a complete unit, and comes with an optional ‘Walkaway’ unit for extended unattended operation.
Key Features:
•Multi format storage capability for tubes, plates or vials within the same unit
•Temperature controlled and conditioned environment, with inert nitrogen option available
•Use stand-alone or integrated to up/downstream automation via optional walkaway unit
•Compatible with most industry standard labware
•Easily integrated into LIMS or corporate inventory systems
Designed for collections up to 360,000 samples. As standard A3 includes:-
•Fully automated sample storage
•Robotic cherry picking
•Sample tracking & ordering software
•12 months warranty
•Support package options
For technical details of this product, please visit the download section above. Alternatively contact an RTS Specialist by emailing lifescience.info@rts-group.com or call +44 (0)161 777 2065.
|
|
|
Bristol ISOLOK® Powder Samplers are designed specifically to take representative composite samples from tanks, pipes and other vessels.
|
|
Sampling of powdery and pelletized products out of the product stream in gravity pipes or hoppers at normal atmospheric conditions or over/under-pressure range (max. 1 bar).
Design Characteristics
- Compact housing of weld stainless steel construction
- Connection flange according to DIN 2501
- Piston of stainless steel with PTFE slide ring seals. Piston volume approximately 0,05 ltrs. or 0,2 ltrs.
- Electro-pneumatic equipment, complete with pipework
|
|
|
|
|
|
Precision Dispensing Pump for UV Sensitive Fluids
Fluid Metering, Inc. of Syosset, NY
announces their new VMP Electronic
Variable Displacement Metering Pump
for accurate dispensing of UV (Ultra-
Violet) sensitive fluids.
Typical fluids that fall into this category are,
UV curable adhesives, UV coatings, and
photo lithography chemicals.
The VMP Variable Displacement
Dispenser is a fully programmable
dispensing system, which utilizes FMI’s
patented CeramPump® Valveless piston
pump design. A precision stepper motor
controls the pump speed.
However, what makes the VMP truly
unique from other FMI dispensers is the
addition of a second stepper motor, which
electronically adjusts the piston
displacement. This provides ultra-fine
dispense adjustments through varying of
piston stroke length.
The VMP can be programmed for a variety of functions using a user-friendly Touch Screen Interface (TSI) which can control up to 16 pumps on a single bus. Up to 128 metering devices
can be controlled using a PLC or computer.
The VMP will store up to 100 programs letting you change between setups on the fly. For UV applications, the pump head is made from either 316 stainless steel or opaque PVDF to isolate UV light from the process fluid as it travels through the pump head.
Typical applications include dispensing of UV curable adhesives for medical component assembly, photo resist for printed circuit and semiconductor manufacturing, and UV adhesives & coatings for DVD manufacturing.
|
|
The microdispensers DMP range has been specially designed for a very highly accurate microdosing of all kind of powdery products. They are often used for accurate filling operations with powders.
Its operating principle makes possible a high rate dosing.
Dosing from 0.05 to 150 grams
Accuracy: ±1%
Rate: up to 1 dose per second
|
|
A shaft encoder records every hundredth of a turn, and a preselection counter is used to set the number of turns corresponding with the volume - and hence weight - you need.
Once this machine reaches the number of turns needed, the screw stops, and the filling system is ready for a new container.
|
|
|
|
|
|
EVERYTHING about dispensing that has been valued in terms of precision and consistency. Autotronik High Precision Dispenser System was designed to concentrate on the essentials, which is cost effective and simple to maintain.
Super fast valves and clever control firmware ensure perfectly controlled dispensing processes. With this elaborate technology and little need for cleaning of the dispensing head, the unit can be used much more effectively. This does not only apply to conventional dot sizes, but also for any sort of microdot, down to a diameter of 0.15 mm.
At the center of the demand for high precision stands the Advanced-Time-Pressure (ATP) method. This is supported by reliable electronics, five super fast valves and highly accurate temperature measurement. All support the automatic calculation and control of precisely appropriate pressure pulses to ensure absolutely constant dispense volumes.
Adhesives, too, can be used without problems. The patented dispense head heating prevents 'stringing'. When dispensing thin potting compounds, for example, the ATP method of the Autotronik High Precision Dispenser System proves its worth. Cartridge fill levels are automatically determined by the pressure built up response and the required snuff back vacuum applied.
|
|
|
|
|
|
NEMO® Dispensers guarantee the highest level of precision in dosing and reproducibility. For this reason, NEMO® Dispensers and NEMO® Hand Dispensers are employed in a great variety of applications and industries.
Such as:
- in vehicle manufacturing
- in the electronics industry
- in renewable energy resources
- in the pharmaceutical and foods industries
- in other adhesive and sealing industries
Features of NEMO® Dispensers and Hand Dispensers
- very gentle conveyance
- compact dimensions at a high number of stages
- large cross sections of inlet
- conveyance also of compacted products
- conveyance of solids
NEMO® Dispensers and Hand Dispensers offer you:
- conveyance volume in proportion to rotation speed
- high dosing precision
- drip-free dosing
- constant low-pulsation conveyance
- high efficiency
- low life cycle costs combined with easy serviceability
Everything from a single supplier
Our broad product portfolio makes it possible for us to design complete dosing systems for you. Take advantage of our many years of experience and know-how.
|
|
Features:
- Provides a low-cost means of dispensing fluids accurately, to better than 1%.
- Ideal for repetitive and volumetric dispensing of acids, solvents, and aqueous solutions.
- FMI's unique low-dead-volume, valveless pump heads.
- High accuracy, synchronous motor drives.
|
|
ASC30 sample changer allows measurements on powder in reflection. Its includes 30 sample crucibles, which are able to spin.
SHCC sample holder allows a continuous measurment on a powder, the sample is spread on a linear support of given lenght. A linear motion is controlled with acquisition. This attachment allows to control the homogeneity of small amount.
|
|
MPS WorkStation
The GERSTEL MultiPurpose Sampler MPS can be configured as a WorkStation or sample preparation robot, independent of the chromatography system.
Using the MAESTRO software, sample preparation steps are easily set up for maximum flexibility and ease-of-use:
- Derivatization and Standard addition
- Dilution and extraction
- Cooled or heated conditioning and mixing
- Sonication or Centrifugation
- Automated weighing of liquid samples and standards
- Solid Phase Extraction SPE
- Disposable Pipette Extraction DPX
For increased flexibility and performance, the WorkStation can be configured with two independent robotic systems enabling the combination of different syringes and the performance of multiple tasks using one automated system
|
|
|
Reduce capital and operating costs by time sharing on-line analyzers. Sample Sequencer® is capable of operating with either continuous or batch-type analyzers. A Manifold Sampling Valve is also available for stream switching with the Sample Sequencer®. Share up to 8 analyzers. CE approved.
|
|
! Most accepted machine for small swatch and sample cutting
! Sizes available from blade width 12” upto 30”
! Equipped with 1 no. Serrated blade and 1 no. Cutting board
! “HSO FREE OF SAND” cutting board for extended life of blade
! Safety is equipped with P.L.C controls for two-hand safety operation.
! Model ‘SUPER CUT’ is equipped with electro mechanical drive.
! Solidly built table Model ‘SUPER CUT’ is provided with millimeter
graduation
! Machines manufactured following the safety classes of EU.
! M.S. rigid frame to with stand vibration
! Maximum of 2 inches of fabric sample can be cut in one quick cycle
! Proxy sensor mechanism provided to hault the machine automatically after
single blade stroke
! Blade reverse & forward provision to set the blade at desired cutting
point
! Lights are provided internally for clear vision of cutting process
! Provision of lockable wheels to move & fix the machine at desired location
! Most economical machine in its range
|
|
The EDDY JET is the ultimate instrument to carry out any spiral inoculation.
It can perform all the spiral plate patterns of any manufacturer in the past.
Patented disposable high accuracy micro-syringe to avoid completely cross-contamination.
Disposable Micro-syringe: World wide patented system to forever eliminate the mistrust in the classical spiral plater instruments. Each sample remains inside the disposable micro-syringe during the whole process .
Immediate replacement: The EDDY JET contains all the spiral plate programs used in the past. It can substitute immediately any old model of spiral plater.
Verifying capability: All the spiral spreading can be checked at any time using a laboratory balance. The volume can be confirmed in the six different zones.
Printer (interface serial, 40 columns)
|
|
The PORTA BAG is a device which allows six bags filled with the sample and the diluent to be held in a vertical position without the fear of spilling the contents.
The tray which holds the pincers and these themselves are made of stainless steel.
|
|
|
|
|
|
INHECO Single TEC Control (STC)
The INHECO Single TEC Control (STC) is a compact plug & play temperature and RPM controller for the use with INHECO’s CPAC and temperature controlled shaking devices. The controller box includes a temperature controller with high accuracy, a device connector slot, a touch display, a wide-range power supply for worldwide use, an USB interface, a rugged housing and a RPM controller for shaking operations.The STC can be individually equipped with a controller slot for the CPAC devices or with a controller slot for temperatur controlled shakers. The device slot can be exchanged easily, giving maximum flexibility. The STC can be either operated manually using the touch screen, or through an USB interface. The soft- and firmware of the controller allows programming of complex temperature and shaking sequences.
Application Areas
The STC is mostly used together with the principal INHECO heating/cooling/shaking units in/on robotic platforms and systems in Lab Automation. The purpose is to form temperature controlled areas, which offer direct and easy access by robotic grippers and pipetting heads. The STC is designed for the use in fundamental research, drug discovery, clinical research and diagnostics in the Life Science market. The STC is also prepared for use in customer IVD applications.
The STC is used with the following INHECO heating/cooling units:
- CPAC Microplate
- CPAC Ultraflat
- Variomag Teleshake
- Variomag Thermoshake
|
|
|
|
|
|
862 Compact Titrosampler – Unique in Size and Performance
Metrohm has launched the 862 Compact Titrosampler. This new instrument combines an autosampler and a titrator on the footprint of a typical analytical balance. The 862 is designed to become the new benchmark in automated routine analysis. Forget lengthy system configuration and hours of user training. Plug-and-play function, predefined titration methods and straightforward operation allow the system to be used immediately after installation.
The 862 Compact Titrosampler accommodates 12 sample beakers and allows various determinations to be carried out fully automatically, including cleaning and conditioning the electrode between the determinations. The new system features a large display, which allows the status of sample series to be followed via live titration curve. Sample series can be interrupted at any time to determine samples with higher priority.
The 862 Compact Titrosampler has a high-precision measuring input and as well as connections for an intelligent dosing unit, stirrer and USB printer. The plug-and-play function means that complicated configuration of the connected devices is no longer necessary. The 862 Compact Titrosampler can be operated by mouse-click; various dialog options are available to adapt the instrument to the particular user.
Also available are the Food/Beverage Compact Titrosampler, which is a package for the most common applications in the food industry, and the Salt Compact Titrosampler, a complete package for the determination of chloride in a diversity of samples.
|
|
|
|
|
|
The capabilities of the TitroLine alpha plus range from simple end-point titrations (EP) to complex and difficult, non-aqueous titrations such as the determination of the acid and base numbers in oils (TAN/TBN).
Two RS-232 interfaces and a Centronics interface combined with the possibility of concatenation (Daisy chain) of periphery make for a comprehensive titration system of titrator, piston burettes, sample changer, balance, printer and PC.
The TW alpha plus sample changer by SI Analytics helps you meet the increased requirements of the GLP and ISO 900X standards and the growing number of samples to be processed and to relieve qualified employees from routine work. With four sample racks for up to 24 samples and titration head fittings for a variety of beakers and titrator vessels you get the flexibility your lab needs. A mere flick of the wrist is sufficient to change the sample racks and titrator heads. As standard, the TW alpha plus comes with an integrated magnetic stirrer.
You can control the sample changer from the TitroLine alpha plus titrator or from a PC with the TitriSoft software. The software can be used with WINDOWS and supports your daily work procedures during sample preparation, titration and evaluation of the results.
|
|
HeoloS industrial suction units of the HSE series are suitable for the suction of all kinds of fluids and emulsions; thanks to the reversed flow system, standard on the entire HeoloS range, it is possible to discharge the sucked fluids in just a few seconds.
The filtering unit is effectively protected by a laminar structure, with tangential inserts which means that only the dusts touch the cartridge filter.
The HSE series is fitted with an elimination unit through which, after the reverse of flow, it is possible to quickly and safely empty out the large 100 liter tank.
The stainless steel structure, standard on the entire HeoloS range, is an extremely important feature, because in the long term, the frequent contact with fluids does not lead to corrosion.
|
|
| ... products without technical information |
| |
|
|
Laboratory automation equipment
