|
|
|
The eP Digital Controller is a closed loop servo controllerfor tension and compression testing machines. It is a pre-settable unit that simplifies materials and product testing and requires a minimum amount of training. The eP features load and crosshead position inputs plus enhanced closed-loop servo capabilities for accurate and repeatable testing. It eP provides one pre test and two test control seg-ments. The eP is an inexpensive and easier-to-use alternative to PC/Windows based materials testing systems. It can store six test methods in memory so that the operator can per-form a variety of tests quickly and error free.
|
|
The Universal Power Cell uses Hall Effect sensors that are
not affected by odd waveshapes or frequencies. Also, no
Voltage or Current Transformers are used. It works on the
output of a drive and can be combined with a modified
"V" Series Load Control.
|
|
|
|
|
|
The new Digital Indication and Control Instrument VarioFox from AFRISO is a compact, ready-to-connect universal measurement and control instrument with integrated sensor supply and 2 (also choice of 4) voltage-free switching outputs. The instrument is very easy to operate and to program due to its text-orientated menu guidance (German, English or French).
VarioFox features a measurement unit listing, where units can be freely edited, as well as a free scaling/calibration of start and end of scale display values (99.999 - 9,999) which allows for almost all possibly required parameter settings. For horizontal cylindrical and spherical tanks integrated calibration charts can be accessed. For non-linear vessels or specially fabricated tanks a customer- specific 24-point linearization is available. The highest and lowest operational values are memorized but can also be utilized as instrument-internal visual and audible alarms on request. An alarm mute/accept button on the front of the instrument requires the responsible operator to act and this in itself provides for additional operational safety.
The measuring instrument works off an AC 50-253 V or DC 20-253 V supply and integrates a sensor input (4-20 mA, 0-20 mA, 0-10 V) and two isolated separate analogue outputs (0/4-20 mA und 0-10 mA).
|
|
|
|
|
|
The Z32Embedded DOS is the base components for realizing a Z32 CNC system. It is installed in the electrical cabinet, and it come sin two versions:
- Embedded DOS.
DOS Operative syetem.
Simply connecting a standard qwerty keyboard and a SVGA monitor to Z32 Embedded it is possibile to use the simple, but complete, DOS interfaces.
If it is connected (through Ethernet cable) with an external console PC, the strongest point of the Z32Embedded DOS is the complete and definitive separation between the real time controller (axes and PLC) and the supervisor connected with an Ethernet cable.
- Embedded WRT
Windows Real Time Operative System
The Embedded WRT has the same features of the Embedded DOS, but the Windows operative system permits to use evolute human-machine-interfaces without needing an extern console PC.
(HMI) -- Human-Machine-Interface:
D.Electron has developed a full software suite ("Z32 for Windows") for installing, servicing and using the Z32 CNC's.
It is however possibile for the machine manufacturer to develop its own interface.
|
|
|
|
|
|
iCM4011 is a dsPIC embedded communication module that makes it possible to quickly and effectively develop applications requiring calculation capacities of up to 30MIPS.
Its architecture is based on a next-generation DSP and incorporates transceivers for the most common communication protocols (RS485, RS232, USB and CAN) to allow interaction with the largest possible number of peripherals.
The board can also be USB powered, giving the module full plug&play functionality.
The processor comes preprogrammed in the factory with bootloader firmware that allows the user to load programs through a RS232 or USB port in a few seconds, without the need for an external programmer or additional software.
It also incorporates an ICSP connector for debugging applications.
Main features:
------------------
* dsPIC 16 bits processor (RISC MCU + DSP)
* 48 KBytes of program FLASH memory
* 2048 Bytes data RAM
* 1024 Bytes data EEPROM
* 30 I/O Ports
* 9 ADC channels (10 bits/sample)
* Auto switching power supply modes: Regulated / USB
* LED indicators
* Small size (38.1 x 38.1 mm)
* Interfaces and Transceivers
o SPI
o I2C
o USB
o RS485
o RS232
o CAN
* Motor control features
o 6 PWM channels
o Quadrature encoder interface
* Other features
o 5 timers
o 4 input capture/compare
o Brown-out reset
|
|
VM-1 is a highly capable, low power embedded controller intended for
Intelligent instruments
Hand-held devices
Industrial automation
Process control
Security systems
and many other applications
Programmed in Venom-SC, the VM-1 can handle
Analogue and Digital I/O
Graphical User Interfaces
TCP/IP Internet protocols
Data and Text files
More capabilities...
VM-1 has lots of I/O on board and an enormous potential for expansion.
2 Serial Ports up to 38,400bd Async; 250Kbd Synch
1 Serial Port up to 9,600bd Async
2 I2C bus (Master only)
1 SPI Bus
1 Dallas 1-Wire Bus
10 Pulse I/0 Channels (6 PWM..., 4 Pulse counting)
2 Quadrature shaft encoders (4 inputs)
8 Analogue inputs (10-bit)
2 Analogue outputs (8-bit)
42 Digital I/0
System bus for Ethernet, Graphic LCD, etc
|
|
|
Computer independence is a key advantage of the VXI platform, and a wide range of solutions are available from many different sources. To provide complete VXI subsystems, VXI Technology offers a broad array of VXI slot 0 interfaces and controllers.
|
|
Sigma Air Manager
To be able to control air systems reliably, a comprehensive exchange of data between the master controller and the internal compressor controller is required.
Unrivalled technical performance and large memory capacity are the main features of the industrial computer that is the heart of the SIGMA Air Manager. The Profibus DP interface (master) allows a single cable to quickly and efficiently exchange large amounts of data with the the SIGMA Control Profibus interface (slave).
The components of this automation system allow a far more sensitive, energy-saving and sure control of compressed air supply equipment than conventional base-load sequencers with their limited rates of data transfer and processing.
- Enables unrivalled control and system flexibility
- Simple installation and interconnection
- Clear menu structure
- Easy parameter setup
- Pressure band control to within +/- 0.1bar
- Fast 32bit technology
- Teleservice capability
|
|
SIMATIC S7-mEC-RTX F is a safety, embedded controller in S7-300 design pre-installed with Windows XP Embedded and the SIMATIC WinAC RTX F S7 software controller.
It combines the benefits of the field-proven modular S7 controllers and PC technology in a single device, and it is especially suitable for high-performance applications.
All common PC interfaces, such as Ethernet or USB, are onboard as standard for open networking with the office world.
Both standard and safety tasks can be solved with just one controller.
The SIMATIC S7-mEC-RTX F can be expanded centrally with the safety I/O modules of the ET 200M. Distributed expansion is possible with the safety I/O ET 200S, ET 200M, ET 200pro (IP67) or the safety block I/O ET 200eco (IP67).
Communication can take place via the PROFIBUS or PROFINET interface.
|
|
|
|
|
|
Industrial communication has become a key technology of industrial automation. Modular machine structures and the necessity of data management require new concepts of networking automation systems.
For this reason, Jetter AG has developed JetWeb technology - a solution that is based on Ethernet, widely-used in most companies from factory to office floor. Jetweb technology is a trendsetter in the market and offers a whole range of significant advantages:
- One Single integrated networking technology for the entire manufacturing realm
- Transparent communication between all devices of a plantin a company
- Integration of machines into the company's IT system
- All devices can be programmed and serviced from any free Ethernet port
- Transparent access to any device allows for uncomplicated commissioning and servicing
- Network technology with high reserve capacities
- Ethernet is the leading standard in the IT-world
- Plug & Play functionality – unaidedautomatic log-on of devices to, and log-off from the network.
- Benefits will increase as IT standards are developed further (e.g. 10 Gbit/s Ethernet)
- Wireless-LAN for mobile applikations
|
|
Positioners and process controllers
PLC-independent positioners and process controllers for process automation as well as 3-point controllers for the position control of motorized valves, electro-pneumatic controllers for pneumatic valves with quarter turn or linear actuators as well as industrial controllers for precise temperature, pressure, flow and level control. Serial RS-232-interfaces, infrared interfaces, field bus connection for Profibus-DP are available depending on the version. Basic settings can be initialised via an automatic intelligent teach mode.
|
|
|
|
|
|
Neuron(R) Chips are sophisticated, very large-scale integration (VLSI) devices that make it possible to implement low-cost control networking applications. They provide all the key functions necessary to intelligently process inputs from sensors and control actuator devices, and propagate control information across a variety of networking media such as twisted-pair cables, power lines, and fiber optics. Neuron Chips provide support for all layers of the LonTalk(R) control networking protocol, an open industry standard approved by the American National Standards Institute as ANSI/EIA 709.1-A-1999.
Control networks using Neuron Chips are used in a wide variety of applications in building automation, industrial control, transportation systems, and so on. These applications include : Heating, ventilating, and air-conditioning (HVAC) ; Lighting control ; Access control ; Fire and security monitoring ; Machine control ; Food industry applications ; Electrical metering and utility automation ; Home automation, domestic appliances ; Scientific and medical instrumentation ; Semiconductor processing ; Fuel monitoring and distribution ; Aircraft flight control ; Train braking and signage ; Entertainment applications.
Cypress offers a line of high-performance, low-cost communications and control processors that are compatible with legacy designs and provide double the maximum clock rate of earlier products and expanded internal memory configuration options.
|
|
Toshiba's LON product line is a family of Neuron ICs, which are based on LonWorks technology developed by Echelon® Corporation.
Local Operating Network (LON) is an intelligent control network that facilitates communication between a group of devices that sense, monitor, communicate and control. LON networks are being used today in various market segments including building automation, industrial automation, power/utility automation, and transportation. Common applications include HVAC systems, lighting systems, alarms and security devices, medical safety equipment, power metering, load management, and more.
|
|
|
|
|
|
MICROCONTROLLER BASED MANUAL LOADER
PRODUCT DESCRIPTION:
This is a microcontroller based manual loader – designed to generate stable and accurate 4-20mA dc current signal, which can be fed to the 4-20mA operated load or actuator such as motorized valve, I/P converter etc… Unlike simple current source meter, the source output 4-20mA is also taken internally as the input feedback to ensure the external loop continuity of the signal which is being fed to the load. In case, the external 4-20mA loop is open, the fault message is indicated on the display, which ensures that the signal is actually being fed or not fed to the load. The 4-20mA signal is of 12 bit resolution, and is fed to the external device in the range of 0.0 to 100.0 %. The smallest change in the output is 0.01% or 16uA. Both the set value and the feedback values are simultaneously displayed on the 4 digit red LED display. The serial communication in the form of RS485, having MODBUS RTU protocol is also provided for SCADA or DCS. The protocol, allows configuration of digital ID of each such DCS-723/DCS-966 and monitoring of source and set parameters. DCS-723/DCS-966 works on 230VAC and is protected against industrial RFI/EMI interference by suitable filter.
|
|
|
The Honeywell HC900 Hybrid Controller is an advanced loop and logic controller offering a modular design to satisfy the control and data acquisition needs of a wide range of process equipment. When combined with the optional, performance rich 1042 Operator Interface that fully integrates the controller database, configuration and set - up time is minimized. This powerful combination together with Honeywell's performance proven control technology provides users an ideal solution for process control. Open Ethernet connectivity also allows network access using a variety of HMI/SCADA software.
|
|
The HC900 controller provides a cost-effective platform for combining loop and logic control. The HC900 is ideal for unit process applications that require a combination of analog process control functions and discrete control actions. When networked with the Experion system for supervisory control, the HC900 controller provides an ideal unit controller for standalone processes, skid-mounted systems and other periphery operations in a process facility.
The HC900 controller offers a blend of analog process, logic and sequencing control algorithms. There are no preset limits on the number of times a function block type may be instantiated in a controller (limit based on memory availability and required scan rate). Features include:
- 1,920 I/O points
- Compact 4, 8 or 12 I/O slot rack sizes
- Open Ethernet network connectivity
- Peer-to-peer data exchange
- Automated loop tuning
- Setpoint programmers
- Setpoint schedulers with multiple ramp/soak outputs andultiple 64-step sequencers
|
|
RabbitNet is a point-to-point synchronous protocol developed by Rabbit to connect peripheral cards to a master.
The signals themselves are differential RS-422, which are series-terminated at the source. Peripheral cards and masters connect using standard 8-conductor CAT 5/6 Ethernet cables into RJ-45 female connectors.
|
|
|
DIN bar controller with incorporated SSR and heatsink for 25, 40, 60, 75, 90, 120 Ampere currents
|
|
|
|
|
|
MKS.TKS
Designed to offer outstanding performance and provide a comprehensive solution for a wide variety of applications such as; food processing,
plastic manufacturing, and process applications requiring heat/cool control process protection alarms.
Additional functionality includes; Servo valve positioner, (mA) linear control or retransmission output, CT input, ModBus communication
interface option, PC Configuration software.
Universal-thermocouple or RTD input coupled with a responsive SMART auto-tuning PID control algorithm that is equipped with special
functions including soft start and non linear cooling. A complete set of process protection alarm function; high and low limit, band and
deviation are included.
The user interface is a large, dual 4 digit LED display with output and status beacons. Logic or Relay outputs are user configurable as either
control, timer status or alarm functions. A logic input may be used to select up to 4 predefined operating set-points. NEMA 4X & IP65 panel
sealing allows these units to be used in wash down or dusty applications.
|
|
|
|
|
|
You will always find the perfect device for your application from our exceptionally wide range of controllers.
Choose the ideal instrument from our range of flexible and high-performance digital and analogue controllers to execute your temperature, pressure and humidity process control tasks without problems.
The pluggable instruments, which can be replaced from the front, can be simply installed in switch cabinets and are easy to operate and adjust.
Furthermore, our product range also contains controllers for top hat rail installation. With the aid of an optionally available RS485 interface, it is possible to interlink numerous controllers and to achieve data exchange and central monitoring.
The following features are impressive:
•Programmable sensor inputs enable the simple connection of numerous sensors
•Up to 5 alarm outputs (relay, SSR or norm signal)
•2 or 3-point controller, 3-point-step controlleras well as PID controller
•Safe heater break function
•Digital control inputs for external set point setting
•RS 485 interface, MODBUS protocol
•Programming adapter for easy transfer of operating data
|
|
A Multiloop controller, a Micro PLC for logic sequences and a powerful Process Computer... ALL IN JUST ONE INSTRUMENT!
AC Station controllers represent the single most effective and innovative solution to the increasing demand of functionalities and flexibility of modern automation system. One AC Station instrument can performe:
data acquisition and monitoring
regulation and control
complex mathematical functions
logic and sequencing
alarm functions
local monitoring of process data, control functions, alarms and events
automatic and manual commands
This flexibility dramatically reduces: control cubicle size, the number of components required and the engineering time to develop an automation system.
|
|
Sophisticated multifunction process controller with high level communication
Process controller with PROFIBUS DP and Modbus/Jbus Master/Slave
1/4 DIN - 96x96 mm
Update time: 50 ms
Frequency input
2 analogue outputs
Setpoint programmer
Memory Chip
|
|
The series of single loop controllers with dual LED displays are used for non-sophisticated system, state-of-art design, sufficient features, easy for operation and low-cost
FEATURES
- Easy-to-use
- Fuzzy modified PID heat & cool control
- Fast A-D sampling rate (5 times/s)
- Universal input (PT100, thermocouple) with high accuracy 18-bit A-D
- Analog output (linear current or voltage) uses high accuracy 15-bit D-A
- RS-485 RS-232 interface
- Programming port provided on board
- Support manual control & auto-tune function
- Wide variety of alarm mode selection
- Lockout protection control
- Bumpless transfer during failure mode
- Soft-start ramp and dwell timer
- Bright display stabilized with digital filter
- SEL function allows to rearrange user menu
- UL/CSA/CE approval
- High performance with low cost
|
|
|
|
|
|
Libratherm offers Four new models of PID controllers ,Model PID-723,PID-966,PID-948 and PID-489. These are indigenously designed and developed using the latest microcontroller chip and programmed with the time tested and field proven PID algorithm. PID controllers are mainly used for the precise process control. Unlike On/Off type of oscillatory control, PID control action gives smooth and steady state control. These model offers, all the useful features which are required to control the complex system.
These models accept factory set single or dual fixed input or the user selectable universal input. The control action is user selectable as PID or On/Off for both direct and reverse or Heat and Cool action . Control outputs are given in the form of optically isolated DC pulse to drive external SSR, Triac or AC SSR to operate AC operated load, electro mechanical relay and/or linear analog output. The analog output levels can also be configured for (0-20)mA or (4-20)mA or (0-5) / (0-10) volt using the front panel key board, In brief, PID-723, PID-948 and PID-489 provides 4 switching outputs and 2 analog outputs whereas PID-966 provides 6 switching and two analog outputs. Both Auto and manual tuning of PID values makes the controller versatile and user friendly. The model PID-723,PID-948 and PID-489 being small in size, can easily be accommodated in small size equipments. One Ramp/Soak function allows user to gradually increase the set value and hold the process value for desired soak time.
|
|
|
|
|
|
Red Lion offers a wide variety of 1/16 DIN and 1/8 DIN controllers, as well as DIN rail mounted models. All devices provide auto-tune for easy setup and an advanced control algorithm to limit overshoot.
- T16 : 1/16 DIN LOW COST PID CONTROLLER
* PID Control with Reduced Overshoot
* Accepts TC and RTD Inputs
* On Demand Auto-Tuning of PID Settings
* DC Analog Output (Optional)
* PC or Front Panel Programming
* PC Configurable with TP16KIT
- T48 : 1/16 DIN PID CONTROLLER WITH ADVANCED FUNCTIONS
* 50 mm x 50 mm
* Dual 4 Digit Display, 0.4" (10 mm) Red and 0.3" (7.6 mm) Green
* Relay, SSR Drive, Triac Outputs
* Linear DC Outputs
* Heat/Cool
* Optional Triac output
* Second setpoint setting
* Optional remote setpoint output
* Optional RS485 serial communication
- TCU : 1/8 DIN PIN CONTROLLER WITH ADVANCED FUNCTIONS
* 97 mm x 50 mm
* Dual 4 Digit, 0.4" (10 mm) LED, 0.3" (7.6 mm) LED
* Auto-tune
* Relay, SSR Drive, Triac Outputs
* Linear DC Outputs
* Heat/Cool
For simple multi-zone applications, our rail mounted Dual Loop Controller is designed to interface via Modbus, DH-485 or DeviceNet, allowing easy connection to your control system.
For more complex multi-zone applications, our state-of-the-art Modular Controller is recommended. This device provides high loop densities, and more advanced communications options, including Ethernet.
The Modular Controller includes in standard in its enhanced version:
web server for remote monitoring and control, data logging, FTP server/client, email/SMS messaging, protocol converter...etc...
|
|
C2s
Proportional Systems Controller
The C2s is an enclosed high-speed, high-accuracy analog PID controller with an enhanced user-interface that allows the user the flexibility to create breakthrough applications.
Features:
* Mutiple PID and Feed Forward Options
* Digital GUI
* Enhanced Tuning via Digipot Adjustments
* Independent Input Signal Scaling
|
|
C2d
Proportional Systems Controller with Integrated Driver
The C2d is an enclosed high-speed, high-accuracy analog PID controller with an enhanced user-interface that gives the user the flexibility to create breakthrough applications.
Features:
* Mutiple PID and Feed Forward Options
* Efficient PWM Driver
* Digital GUI
* Enhanced Tuning via Digipot Adjustments
* Independent Input Signal Scaling
|
|
|
|
|
|
MAC Amplifier-Controller-Combination
As a compact cost effective unit, the MAC is designed to provide a closed loop control functions for strain gauge transducers (e. g. web tension measurement).
The MAC is optimized for use in electrical cabinets. There it can be DIN rail mounted or directly to a mounting plate.
The enclosure of the MAC contains an amplifier and controller.
The amplifier supplies the auxiliary power to the strain gauge transducers and conditions the output signals. Two voltage outputs with different filters are available.
The independent function of the current output can be connected either to the high or low dampened voltage output. The external use of as 10 Volts / 20 mA signal converter is also possible.
The PID components of the controller can be individually adjusted and also partially switched off. Additional adder and multiplier circuits enable the processing of other signals, e. g. diameter signal.
24 volts control signals can shut off the controller portion or gradually activate or deactivate the output signal.
|
|
|
|
|
|
851/852 series electronic controllers is able to fulfill a large application range.
These instruments are especially designed for temperature control in industrial machines and process, but their capability to accept standard input analog signals (4 - 20 mA, 0 - 10 V, etc.) and to give the same standard output signal, make them suitable for different than temperature control loops too (e.g. relative humidity, PH, position, voltage, level, etc.).
TYPICAL APPLICATION AREAS :
- Plastic and rubber processing
- Packaging machinery
- Refrigerator controls
- Thermal treatments
- Food production
- Chemical processes
Textile machines and processes
851 and 852 series PID controllers have a large range of parameters adjusting field and they are intended to constitute a "building block" in whatever automatic control loop.
The ordering code composition allow the selection of the exact desired function among all the possible alternatives.
Mechanical structure is designed for fulfill all the field users request.
Plug in facility, faston or screw electrical connection, large display dimensions, reduced depth and conformity to standard DIN 43700, DIN 4050, VDE 0110, UL 508, make this instrument range suitable for acceptance in any specifications.
|
|
|
|
|
|
Smart PID Controller MS-5300
Universal control output
and RS-485 Modbus communications
1/8 DIN (48 x 96 mm)
The MS-5300 Series is a high range process controller, fully configurable, provided with a response time of 500 ms suitable for fast process control, and universal control algorithms Step-by-Step, Heat-Cool, Analog and Time proportional control or digital control through DCS system. Designed for controlling fast response processes in industrial applications requiring high performance devices.
Fully configurable by keypad or from PC using LOOP WIN software programming tool
Universal analóg input 8 TC, RTD, mV or mA
High accuracy 0,1%
Bimodal PID control, Autotuning and Fuzzy-Logic
500 ms response time
Time proportional relay control output
Step-by-Step, Heat-Cool and Bimodal control
Analog control output 0...4-20 mA (optional)
3 relay outputs and 6 alarm modes
Direct Auto-Manu station from keypad
Transmitter power supply 24 Vdc standard
RS-485 modbus communication standard
Compatible with DCS-8000 system
|
|
|
|
Universal controllers and regulators
