I/O modules

333 companies | 2262 products
Filters
  • What’s new?
    Submit

Much more than a well-made I/O that features a unique design, the X20 system provides more than your average system. It provides total control. The X20 family allows it...

Beckhoff has come up with an Ethernet-based fieldbus namely EtherCAT. The protocol is suitably designed for hard and soft real-time requirements...

The X20 System goes well beyond being a mere remote I/O system, to an entire control solution, thanks to its advanced ergonomic design as well as careful detailing. Specific...

Mount, connect, and you're ready to go. The new dimension for remote I/O mounted directly on...

Well known manufacturers are having difficulties in integrating valves. With the XV valve connection, it...

{{productDetail[7334]}}

Bus systems have individual control panes and up to this point with additional programming this was possible, yet complicated and costly....

{{productDetail[5441]}}

This I/O module has 20 channels with ten being universal inputs for analog and binary signals. It uses Pt 1000 analog inputs...

Utilizing the latest in software engineering, TROVIS presents their newest in automation technology, The 6600 Automation System Input Module TROVIS 6625. Designed...

{{productDetail[11609]}}

This input expander features inputs able to support four sensors per interface...

This input expander is best known for the fact that it allows the connection of up to four...

SCHMERSAL solution to the ever growing technologies and developments today, the AES - E 3035 Input expander is designed as part of safe signal processing. The...

Solenoid interlocks and sensors get series-wired with SD interface. For that, series wiring of both serial diagnostic lines and...

{{productDetail[787]}}

The Sitrans LU AO Analog Output Module is specifically designed to provide an excellent quality performance...

{{productDetail[18343]}}

If you are looking for an advanced analog input module that supports up to eight channels, it may be worth...


8 stations with regard to Two-cable HART transmitters

Fundamentally secure inputs...

The HART Ex j/I.S. is an analog input module featuring four channels for two-wire transmitters and four channels for...

This nine channel series 9461/15 analog input module supports two-wire HART transmitters and is compatible...

This safety analog input module is suitable for all applications that require a PROFIsafe protocol of type V1 or V2 and comes...

{{productDetail[9224]}}

The F3YP22-0P, F3YP24-0P and F3YP28-0P positioning modules are the modern input-output(I/O) modules to be connected to the base module of FA-M3 range free regulator. Through...

This wireless management station is based on a wireless communication standard ISA100.11a. This is ideal for industrial automation as well as any other high end operations. One of the main advantages...

{{productDetail[19033]}}

The Liebert IntelliSlot Web Card series of products is made to work with UPS, cooling and power management systems. This allows units to use web signals and to get on telnet...

In the Lorain Monitoring Units, the popular features of previous DC monitoring products are...

{{productDetail[7027]}}

This range of Guardmaster® Safety t-ports/splitters, distribution boxes and shorting plugs...

This chassis-based I/O is intended for use with an Allen-Bradley®
controller as they...

The In-Cabinet Modular Distributed I/O can be placed in several locations within your application and requires an enclosure. The design...

Bulletin 1738 ArmorPOINT® I/O is designed to provide enhanced environmental protection in addition to POINT I/O™ architecture.
It provides...

Guard I/O™ Safety products ensures system's safety with traditional...

{{productDetail[7901]}}

16 channels digital in and 8 channels Relay out
Input Voltage Range Low: -3V..5V
Input Voltage Range High: 11V..30V
High Nominal...

The CP3923 is an Ethernet switch that is fully managed and provides IPv6/IPv4 routing capabilities. Various sets of management...

The Kontron CP932 is a 5+1 Port Gigabit Ethernet Switch with integrated NIC (with Intel 82541,...

CP930 is a metal crafted 5 port quick Ethernet switch which is created for application in...

The CP342 is a Dual Gigabit Ethernet controller board, based around Intel 82546GB chip and...

{{productDetail[29073]}}

GENERAL PAC8000 I/O is a completely modular I/O solution for both general purpose and hazardous area applications. Based upon...

GE's 8x0 VME64 bus-to-bus adapter is an affordable unit that can manage VME64 to VME64 or VME64 to...

From the makers of quality innovations bringing their top of the line Bus Adapters,GENERAL ELECTRIC's 810 VME64 to PCI bus-to bus adapter are created to connect...

These bus-to-bus adapters (8x0 series-VME64) from GE Intelligent Platforms are cost-effective solutions for applications...

The PMC-422 is a flexible solution for integrating multiple...

{{productDetail[7314]}}

The CDF600-2 Profibus fieldbus module is an easy-to-use unit that integrates identification sensors in PROFIBUS-DP networks ideal for handling and warehousing systems, consumer...

Flexi loop is an economical solution to meet the need for safe switches and sensors within a machine that also supports transfer of detailed diagnostic information....

{{productDetail[894]}}

This uses two wires for eight digital I/O. It has...

This unit is used as a voltage/current signal acquisition. It has a configurable...

The 8 channels thermocouples module is used for translating millivolt level signals from...

This unit manages four temperature channels with PT100...

This uses eight digital I/O channels and a 24V input with a 24V 0.5A...

{{productDetail[6014]}}

The EL1124 (5 V DC), EL1144 (12 V DC) and EL1134 (48 V DC) digital input terminals acquire the...

The EL3xxx and ES3xxx Series analog terminals gives signals ranging from 0 to 10V. the...

The EP1008 and EOP1018 are EtherCAT box modules that use digital inputs. These will take in binary signals from a process and will move them out to a controller. The signals will be identified and read...

{{productDetail[7183]}}

These newly designed Bulletin 1492 I/O wiring systems are unique and cost saving. being affordable and reliable,...

Guardmaster® Safety t-ports/splitters,...

Bulletin 1753 GuardPLC™ Safety I/O comes with all the advantages of standard distributed I/O intended...

Bulletin 1791DS and 1791ES CompactBlock™ Guard I/O™ modules
are designed to deliver all the benefits of the...

Bulletin 1715 Unnecessary I/O Program enables a ControlLogix® control to speak to distant, unnecessary I/O by using...

{{productDetail[5071]}}

Looking for quick-disconnect systems dedicated to machine safety? Guardmaster® Safety t-ports/splitters,...

ROCKWELL AUTOMATION's solution to the growing need in industrial automation, the ArmorBlock Guard Safety I / O. Designed to provide all the advantages of traditional...

This Bulletin 1753 GuardPLC™ Safety I/O offers the same convenience that the Allen-Bradley®...

Modules of Bulletin 1791DS and 1791ES CompactBlock™ Guard I/O™ score over other equipment for its...

POINT Guard I/O™ segments tend to be safety-rated I/O segments made to squeeze into the conventional...

{{productDetail[9138]}}

If your industry project or application requires communication between EXTER operator panel and a network of type Profibus, this compact...

This MPI expansion operator panel can link an EXTER panel to an MPI network. The EM-MPI will facilitate this link by being mounted onto the...

The EM-CAN module allows communication between the EXTER operator panel and the J1939 network. The model provides support for...

{{productDetail[11655]}}

Beijers I/O systems provide solutions for most conceivable areas of use. These I/O systems function with the most popular communication interfaces on the market, including EtherCAT, Modbus...

{{productDetail[23849]}}

Mitsubishi Electric CC-Link is a device level network designed for interconnecting a range of automation applications including I/O, Controllers, HMIs, VFDs and Servo products. The high performance network uses 10 MBit twisted pair wiring.

For remote I/O control...

This CC-Link IE Field is a network that can be constructed to append automation devices and if it is configured for remote I/O networks, a slave...

Just like the name suggests, CC-Link Safety is all about safety. It is fully ISO13849-1 CAtegory 4 and IEC 61508 certified. The safety network is high performing and it's based on the modern CC-Link technology...

CC-Link/LT is designed using 10MBit twisted pair wiring. This sensor level network delivers high performance when interconnecting remote I/O devices.
Systems configured...

The ST Series is a modular system that is allowing operators to configure nodes that are very versatile without any complications. It serves as a...

{{productDetail[25880]}}

Digital triggering and external clocking with a defined range that is generated by...

2 16-bit analog components (833 kS/s); 24 electronic digital I/O; 32-bit counters
NIST-traceable standardization certification and...

60 VDC constant financial institution solitude, 1,400 Vrms/1,950 VDC station-to-shuttle solitude endure for five s

4 analogue outputs...

60 VDC constant financial institution solitude, 1,400 Vrms/1,950 VDC station-to-shuttle solitude endure for five s

2 analogue outputs (...

60 VDC constant financial institution solitude, 1,400 Vrms/1,950 VDC station-to-shuttle solitude, endure for five s

2 analogue outputs...

{{productDetail[5074]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation