Ball bearings

73 companies | 449 products
Filters
  • What’s new?
    Submit
ball bearing / combined axial/radial / precision - ID: 50 - 1300 mm| HYT

The HYXR Crossed Taper Roller Bearing is ideally designed to provide a good quality performance and functionality. It is a high precision device with a...

ball bearing / angular-contact / high-accuracy / heavy-duty - ID: 325 mm, OD: 450 mm | HYZF325

The Axial angular contact ball bearing features reduced friction, superior accuracy at higher speeds, greater axial and radial loads along with high demands on tilting rigidity. These bearings are suitable for precision applications involving...

ball bearing / angular-contact / high-speed / high-accuracy - ID: 460 mm, OD: 600 mm |  HYZF460

The HYZF460 is part of the HYZF series bearings that delivers a low-friction and accurate operation in high speeds. Its has a 460 mm inner diameter and an outer diameter...

ball bearing / angular-contact / high-accuracy / heavy-duty - ID: 100 - 460 mm | HYZF

The HYZF Bearing is designed with low friction and high accuracy features. It is suitable for high speed, high radial and axial loads, and for applications...

{{productDetail[86155]}}
ball bearing / double-row / angular - id:100-340mm|od:180-520mm

The design of double row angular contact ball bearing is almost the same with that of single row angular...

ball bearing / angular - id:120-4272mm|od:280-4726mm

Angular contact thrust ball bearings mainly carry axial load and it also can carry certain radial load.Compared with thrust ball bearings...

ball bearing / radial - id:150-1400mm|od:190-1700mm

Deep groove ball bearings are one kind of radial bearings widely used.They are simple in structure non-separable cheap in its price.In addition they require little maintenance in service as wll as are capable to be...

ball bearing / single-row / four-point-contact / angular - id:150-480mm|od:225-870mm

Four-point contact ball bearings are radial single row angular contact ball bearings with one split inner ring or one...

ball bearing / single-row / angular - id:420-1600mm|od:500-1760mm

Single-row angular contact ball bearings have a contact angle, they can sustain significant
axial loads in one direction together with radial loads. Because of their design, when a radial
load is applied, an axial force component is produced; therefore,...

{{productDetail[131455]}}
ball bearing / single-row / angular-contact - ø 80 - 750 mm

The THB is an angular contact bearing with a bore diameter of 80- 750 considering...

ball bearing / double-row / angular-contact - ø 80 - 300 mm

The Double-row Angular-contact Ball Bearing, developed by THB Bearing, is built as standard with Normal axial internal clearance. It is available...

ball bearing / four-point-contact - ø 80 - 240 mm

The angular contact ball bearing has a single row angular contact type that has a bore...

ball bearing / double-row / angular-contact - 12 - 50 mm

The Double-Row Angular-Contact Ball Bearing, manufactured by THB Bearings, is specifically designed for screw mounting application. It has a complete unit which is composed of a single-piece outer ring,...

ball bearing / rigid - ø 80 - 1240 mm

THB's deep groove ball bearing is composed of an inner ring, an outer ring, steel balls, and a cage. The inner and outer ring cannot be separated, thus ensuring the simplicity of the device...

{{productDetail[57112]}}
ball bearing - 1, 6 series

The device is available in metric sizes of 1600, 6000, 6200, 6300, 6800 and 6900 series. Bearing rings and balls are made from high carbon chromium bearing steel. It comes with a low noise bearing grease and...

{{productDetail[69450]}}
ball bearing / rigid - ABEG Xforce

The Deep-groove ball bearing ABEG Xforce Series is manufactured by Findling Wälzlager....

ball bearing / rigid - 6000 - 6018 | ABEG Xforce

The ABEG Xforce is a unit intended for heavy duty applications. They are made...

ball bearing / rigid - 6200 - 6216 | ABEG Xforce

Xforce deep-groove ball bearings, developed for heavy –duty applications, is one of the four products in the...

ball bearing / rigid - 6300 - 6315 | ABEG Xforce

Xforcea, a product of ABEG® eXtreme series was developed for heavy duty operations. The Xforce deep-groove ball bearings...

ball bearing / rigid - ABEG eXtreme series

The ABEG Extreme series is a deep-groove ball bearing developed by Findling Wälzlager....

{{productDetail[37598]}}
{{productDetail[15072]}}
ball bearing / single-row - ID: 0.19

Airframe Control Bearings are generally characterized of being relatively lightweight, corrosion resistant, grease-lubricated, and are typically sealed to ensure uncompromising...

ball bearing / angular-contact - ID: 10 - 280 mm, OD : 19 - 400 mm, 1.7 - 730.5 kN

Due to their internal design, angular contact ball bearings can withstand high radial-axial loads and reach high speeds. They are asymmetrical for manufacturing reasons and can withstand unidirectional axial loads only. Angular bearings are usually mounted...

ball bearing / inch-size - ID : 0.1875

Commercial Inch Series Bearings are also commonly known by their numeric series name, the "1600 Series Ball Bearings."...

ball bearing / double-row / angular-contact - ID : 10 - 100 mm, OD : 30 - 190 mm, 3.9 - 212 kN

Double Row Angular Contact ball bearings have two rows of balls arranged back-to-back. The lines of action of the load at the contact between balls and raceways (load lines) diverge...

ball bearing / single-row / water-proof - ID : 0.3543

Felt Sealed Single Row Ball Bearings are defined by the fact that the ball bearing has at least one felt seal. Seal combinations include one felt seal, one felt seal and one...

{{productDetail[11904]}}
ball bearing / single-row / water-proof - ID : 0.3543

CEROBEAR ceramic bearings make it possible to apply rolling bearings in a variety of circumstances. Cerobear ceramic bearings offer new opportunities of application, especially in extreme technical domains, which have been inaccessible up till now.

The inner and outer rings...

ball bearing / single-row / water-proof - ID : 0.3543

CEROBEAR hybrid rolling bearings open up whole new fields of different applications for rolling bearings. Their numerous advantages over conventional rolling bearings make them an economical and high-quality solution in a number of fields of use.

The bearings consist...

ball bearing / ceramic / hybrid - CS

CEROBEAR hybrid constant diction bearings differentiate themselves by having constant cross sections of the diameter. Their compact design makes it possible to massively reduce construction size and weight.

The bearings are constructed of bearing...

{{productDetail[61988]}}
ball bearing / ceramic / hybrid - CS

Boston Gear's comprehensive line of un mounted, inch-size ball bearings are designed to meet diverse manufacturing and budget requirements, adding value and choice to your power transmission purchases. And design...

{{productDetail[9195]}}
ball bearing / carbon steel - ø 0.6 - 200 mm

Material: 1.3505, 1.3520
Grade: G5...

{{productDetail[83721]}}
ball bearing / carbon steel - ø 0.6 - 200 mm

This is a Miniature ball bearing manufactured by Jesa which is made from...

ball bearing / carbon steel - ø 0.6 - 200 mm

This ball bearing unit is developed by JESA. JESA is capable of catering wide variety of applications because of their vast assortment...

{{productDetail[21629]}}
ball bearing / carbon steel - ø 0.6 - 200 mm

The Single-row deep-groove ball bearing is manufactured by KINEX-KLF. The product has high load...

ball bearing / carbon steel - ø 0.6 - 200 mm

The Single-Row Deep-Groove Ball Bearing, manufactured by KINEX-KLF, is a device that has deep raceways...

ball bearing / carbon steel - ø 0.6 - 200 mm

The Angular-contact Ball Bearing is a high precision single row ball bearing developed by Kinex-KLF. It is mainly used for standard seating and for high...

ball bearing / carbon steel - ø 0.6 - 200 mm

The single-row angular contact ball bearing was manufactured by Kineki. It is intended for rotation frequency and accuracy of seating that differ from normal angular contact...

ball bearing / carbon steel - ø 0.6 - 200 mm

Kinex manufactures ball bearings with double row, with an angular contact. These bearings...

{{productDetail[26936]}}
support bearing / ball screw - ZKLF, ZKLN Series

When the ball screw bearings are subject to specific requirements...

{{productDetail[13285]}}
support bearing / ball screw - ZKLF, ZKLN Series

MAST GUIDE BEARINGS

We design and produce special mast guide bearings for OEM forklift trucks manufacturers. These bearings meet specific concept...

{{productDetail[26926]}}
support bearing / ball screw - ZKLF, ZKLN Series

Plastic Bearings
POM and PA materials with good mechanical strength and wear resistance,...

{{productDetail[70940]}}
support bearing / ball screw - ZKLF, ZKLN Series

Owing to 50 years experience in the industry, we are able to solve any motion problems, working out and designing the ideal product for customers' needs.
We supply complete solutions...

support bearing / ball screw - ZKLF, ZKLN Series

Owing to 50 years experience in the industry, we are able to solve any motion problems, working out and designing the ideal product for customers' needs.
We supply complete solutions...

support bearing / ball screw - ZKLF, ZKLN Series

Owing to 50 years experience in the industry,we are able to solve any motion problems, working out and designing the ideal product for customers’ needs.
OMET carries out strict final inspection tests on the products in its in-house lab, guaranteeing...

support bearing / ball screw - ZKLF, ZKLN Series

Owing to 50 years experience in the industry, we are able to solve any motion problems, working out and designing the ideal product for customers' needs.
OMET carries out strict final inspection tests on the products...

{{productDetail[32545]}}
ball bearing / custom -

PEER Bearing manufactures a full range of inch and metric single row deep groove ball bearings & double row angular contact ball bearings that meet the application demands of the global market. The product portfolio is designed to support customers in Agricultural (Lawn & Garden), Distribution,...

ball bearing / custom -

PEER Bearing manufactures a full range of inch and metric single row deep groove ball bearings & double row angular contact ball bearings that meet the application demands of the global market. The product portfolio is designed to support customers in Agricultural (Lawn & Garden), Distribution,...

ball bearing / rigid / single-row - RX, LX series

PEER Bearing manufactures a full range of inch and metric single row deep groove ball bearings & double row angular contact ball bearings that meet the application demands of the global market. The product portfolio is designed to support customers in Agricultural (Lawn & Garden), Distribution,...

{{productDetail[18065]}}
ball bearing - 50 - 475 lb | HW, HWDG series

Unground bearings include various styles and types for different application from casters to sporting equipment. These bearings offer low cost and flexible solutions to meet with customers' requirements in many applications. Materials of these bearings include carbon,...

{{productDetail[26292]}}
ball bearing - 50 - 475 lb | HW, HWDG series

Single-row deep-groove ball bearings are suitable for use at both low and high speeds. They absorb radial and axial forces. They cannot be dismantled. (Electric motors, fans, encoders, flowmeters, etc.)

Single row deep-groove ball bearings consist of

An inner and an outer ring
A set of balls with cage and...

ball bearing - 50 - 475 lb | HW, HWDG series

Spindle ball bearings are single-row angular
contact ball bearings with a contact angle
of 15° or 25° that can support load on one side.
In respect of their design, their running accuracy
and the materials used, they are optimized for
highest...

ball bearing - 50 - 475 lb | HW, HWDG series

Superduplex bearings

Double-row deep groove radial bearing or angular contact ball bearing with divided inner or outer ring are called Superduplex bearings.
The raceways are on the one-piece ring. This reliably...

ball bearing - 50 - 475 lb | HW, HWDG series

Standard program:
- Bore diameter: 1 to 25 mm
- Outer diameter: 3 to 40 mm
- Metric and inch dimensions
- Various kinds of retainers and closures (shields and seals)
- 3...

{{productDetail[66540]}}
ball bearing / thin-section - 35 - 200 mm

Modern designs rely on a compact design, low weight and miniaturization. This highly engineered bearings, such as the KAYDON REALI-SLIM® thin-section bearings are an ideal solution. Each series of REALI-SLIM® thin-section bearings is based on a single cross-section that remains constant even with increasing...

ball bearing / thin-section - 35 - 200 mm

When standard bearings from a design or commercial view are not suitable, Rodriguez offers a multitude of bearings made of appropriate...

{{productDetail[16862]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation