Bearing and bearing unit components and accessories

Inside diameter: 5 mm - 10 mm
Outside diameter: 9 mm - 20 mm
Width: 4 mm - 6.5 mm

Magnetic fluid Sealed Bearing is capable of forming a strong membrane of the magnetic fluid at the sealed area,which blocks the incoming water and/or foreign substances .This makes it possible to maintain the initial performance of the ...

Inside diameter: 1.5 mm - 10 mm
Outside diameter: 4 mm - 19 mm
Width: 1.8 mm - 7 mm

Radial bearings generally feature a single row of balls in a deep groove, and are used in a wide range of precision rotating mechanisms. They can accept loads in the radial direction and a marginal amount of load in the thrust direction, ...

Inside diameter: 3 mm - 12 mm
Outside diameter: 3.2 mm - 12.2 mm

Thrust bearings are bearings that accept loads in the axial direction and rotate. The CRT and SST types come with ball rolling grooves. CRT type materials: SUJ2 SST type materials: SUS44OC Lubricant: Origin genuine oil In response ...

Inside diameter: 10 mm - 20 mm
Outside diameter: 26 mm - 52 mm
Width: 7 mm - 15 mm

LYC deep groove ball bearings are one kind of radial bearings widely used. They are simple in structure non-separable cheap in its price. In addition they require little maintenance in service as well as are capable to be operated at ...

LYC self-aligning ball bearing has a sphere raceway in the outer ring and a double-raceway in the inner ring. This feature gives the bearings the self-aligning property which can keep the machine operating well even when angular misalignment ...

LYC thrust ball bearing is separable including a shaft washer (fit with journal) a housing washer (fit with bearing block) a group of steel balls and a cage which make it very convenient to fit with journal and bearing block respectively. ...

Inside diameter: 0 mm - 800 mm
Outside diameter: 25 mm - 900 mm
Width: 20 mm - 1,000 mm

Spherical bearings are used to transmit the force and moment in linking rods, suspension rods, shock absorbers, etc. and at the same time dampen the in-system transmission of vibrations. The spherical bearings can also accommodate a certain ...

Inside diameter: 10 mm - 300 mm
Outside diameter: 30 mm - 800 mm
Width: 20 mm - 800 mm

Anti-vibration components includes the following elements: bushes, spherical-bearings, buffers, cabin mounts, shock absorbers, engine mounts, suspensions, springs, couplings, etc. They are used in various fields such as the railway industry, ...

Inside diameter: 500 mm - 1,400 mm
Outside diameter: 750 mm - 2,000 mm
Width: 170 mm - 250 mm

Rolling bearings are available in many shapes and varieties, each with its own specific features. The overall dimensions and configuration of standard bearings are defined by international standards: this allows an easy accessibility ...

Inside diameter: 100 mm - 1,800 mm
Outside diameter: 150 mm - 2,000 mm
Width: 50 mm - 462 mm

Spherical roller bearings have two rows of symmetrical barrel rollers that rotate on a single spherical raceway in the outer ring. The two inner ring raceways are inclined at an angle to the bearing axis. Because of their high load carrying ...

Inside diameter: 170 mm - 1,240 mm
Outside diameter: 350 mm - 1,540 mm
Width: 80 mm - 140 mm

Rolling bearings are available in many shapes and varieties, each with its own specific features. The overall dimensions and configuration of standard bearings are defined by international standards: this allows an easy accessibility ...

Rotational movement is everywhere. And so is CGR – we have been called on to develop applications of our products for many different sectors ranging from sports to medical uses, from farm machinery to the leisure industry, and the list goes on...

Special group with two angular contact ball bearings for the medical sector.

Inside diameter: 55 mm
Outside diameter: 170 mm
Width: 32 mm

Crossed roller bearings. The main feature of this bearing is that the cylindrical rollers are arranged with each roller perpendicular to the adjacent roller, in a 90° V groove, separated from each other by a spacer retainer. This design ...

Outside diameter: 10 mm - 800 mm

The radial ball bearings, single and double row that CPM designs and manufactures, go from 10 mm bore up to 800 mm external diameter. This type of bearing may be supplied full complement or with separating cage (steel or plastic) and ...

Daido Metal USA has released CR9436K K-Series Rod Bearing Set for late model Ford Scorpion Power Stroke (Scorpion) 6.7L Diesel. The Daido K-Series bearing set features tri-metal material construction with a lead-tin-copper alloy coated ...

Daido Metal USA has released MNS4668V V-Series Main Bearing Set for late model Chrysler/Dodge/Jeep Gen3 Hemi engines 5.7L-6.4L. The Daido V-Series bearing set features tri-metal material construction and the same high performance lead-indium ...

Daido Metal is a longtime manufacturer of engine bearings used inthe highest levels of international motorsports. With nearly 80 years of experience, Daido bearings have chalked up victories in F1, Moto GP, World Endurance, World Rally, ...

Renogear ball bearings support high axial and radial loads, from any direction, being able to adapt to any different applications in the market. Renogear ball bearings are characterized for their large size and are capable to run at higher ...

Renogear ball bearings support high axial and radial loads, from any direction, being able to adapt to any different applications in the market. Renogear ball bearings are characterized for their large size and are capable to run at higher ...

Designed to meet even higher demands on the capacity to support high loads, Renogear double row ball bearings guarantee precision and high performance under very demanding working conditions. Renogear has a wide range of ball bearing ...

Inside diameter: 30 mm - 500 mm
Outside diameter: 76 mm - 1,135 mm
Width: 26 mm - 627 mm

Turbolink’s tilting pad journal bearings are numerous to ensure that the requirements of each rotating machine can be met in well. Our design skills supply a variety of pad pivot types to provide varying degrees of alignment capability, ...

Inside diameter: 424 mm - 1,012 mm
Outside diameter: 431 mm - 1,024 mm
Width: 165 mm - 395 mm

Turbolink vertical bearings are a standard range of vertical bearings, which are robust, lightweight (dependant on size) and self lubricating. These bearings can be fitted with a variety of resistance temperature devices to measure ...

NEW FOR 2015 ! ENGRENAGES HPC has widened its range of radial contact ball bearings by introducing several new models. The range now comprises: - Self aligning ball bearings - Double row radial contact ball bearings - Angular ...

Inside diameter: 2 mm - 90 mm
Outside diameter: 5 mm - 190 mm
Width: 3 mm - 67.5 mm

ENGRENAGES HPC is enlarging its range of rotary guidance products. The catalogue now contains radial contact ball bearings as well as angular contact ball bearings (with single or double rows of bearings), radial ball bearings, roller ...

Inside diameter: 832 mm - 1,181 mm
Outside diameter: 1,000 mm - 1,308 mm
Width: 90 mm

Industrial ballbearings Our I90-Series and I90/2-Series are our ball bearing turntables for industrial applications, operating at speeds exceeding 60 km/h. We have two lines with one or two rows, both with a 90 mm high profile and ...

Inside diameter: 283 mm - 953 mm
Outside diameter: 400 mm - 1,100 mm
Width: 52, 60 mm

Z-profiled We design and manufacture Z-profile ballbearing turntables with a diameter between 400 and 1100 mm and with a profile of 52 or 60 mm high. Each ballbearing turntable can be customised on request with specific diameters, ...

Inside diameter: 205 mm - 1,052 mm
Outside diameter: 303 mm - 1,207 mm
Width: 55, 65, 80, 90 mm

We design and manufacture ballbearing turntables for light applications with a diameter between 300 and 1200 mm and with a profile from 55 to 90 mm high. Each ballbearing turntable can be customised on request with specific diameters, ...

Inside diameter: 0.5 in - 1.5 in
Outside diameter: 1.8 in - 3.5 in
Width: 1.2 in - 2.6 in

Adapter bearings are mounted units designed for use in equipment where shafts are supported in frames or sheet metal surfaces. They combine a self-aligning bearing with seals, a mounting flange, and a shaft locking collar into a compact ...

Inside diameter: 0.5 in - 0.8 in
Outside diameter: 2 in
Width: 0.8, 1.25 in

These bearings are mounted units designed for use in equipment where round or hex shafts are supported. They combine a self-aligning bearing with seals, a square mounting flange into a compact pre-lubricated, easily installable unit. ...

Inside diameter: 1.06 in - 1.5 in
Outside diameter: 2.8 in - 3.5 in
Width: 0.9, 1.2, 1.4 in

These bearings are designed to support shafts on heavy overhead doors, gates in shopping malls and in agricultural equipment. They combine a self-aligning bearing with seals and a mounting flange into a compact pre-lubricated, easily ...

Inside diameter: 20 mm - 500 mm
Outside diameter: 47 mm - 670 mm
Width: 18 mm - 148 mm

SBI full complement cylindrical roller bearings (Full Complement Bearings) are designed to carry heavy load. Comparing with traditional bearings with cage, full complement cylindrical bearings have much higher loading capacity. The radial ...

Inside diameter: 60 mm - 400 mm
Outside diameter: 85 mm - 540 mm
Width: 25 mm - 140 mm

SBI full complement cylindrical roller bearings (Full Complement Bearings) are designed to carry heavy load. Comparing with traditional bearings with cage, full complement cylindrical bearings have much higher loading capacity. The radial ...

Inside diameter: 20 mm - 300 mm
Outside diameter: 42 mm - 460 mm
Width: 29 mm - 216 mm

SBI full complement cylindrical roller bearings (Full Complement Bearings) are designed to carry heavy load. Comparing with traditional bearings with cage, full complement cylindrical bearings have much higher loading capacity. The radial ...

Modern designs rely on a compact design, low weight and miniaturization. This highly engineered bearings, such as the KAYDON REALI-SLIM® thin-section bearings are an ideal solution. Each series of REALI-SLIM® thin-section bearings is ...

Inside diameter: 20 mm - 350 mm
Outside diameter: 70 mm - 540 mm
Width: 12 mm - 45 mm

Fixing holes have been set, the installation process no require flange and bracket, so it could obtain stable rotation accuracy and torque. High load capacity Taking loads from all directions High rigidity Stable rotation accuracy Easy ...

Inside diameter: 20 mm - 200 mm
Outside diameter: 31 mm - 226 mm
Width: 5 mm - 13 mm