|
|
Chilly: Cooling water - Industrial compact water chiller
Standard equipment
Waterlevel control outside
Stainless steel coil evaporator
High tech. scroll compressor / low noise
High efficiency air cooled condensor
Digital thermostat hysteresis +/- 1,0 K
Refrigerant circuit with TÜV approved high pressure switch
Chiller IP 44
Operating temperature max. 42° C ambient
Plastic water tank
Draining through water level control
Environment friendly refrigerant R 407 c
Internal by-pass for pump protection
Non ferrous water circuit
CE-Standard / ISO 9001 / EN 60204
Grundfos/Speck pumps
Water connection quick cuppling
Options:
Water outlet manometer
Waterlevel switch for pump-protection
Common alarm (potetial free)
2 x water inlet / outlet
Special voltage
Flow switch
Autom. fresh water supply
|
|
| CH Series chillers, with a cooling capacity from 6.6 kW up to 108 kW. These “portable” models are particularly versatile and compact, ready for simple and immediate start up. |
|
New HITEMA chillers destiny to world wide Market and available in different version, are machines more energy efficient, more silenced, more compact, certified by international corporation.
The compact size of the units makes for more efficient use of available space, with reduced footprints minimizing the installation surface area required.
The base frame is made of heavy gauge electrowelded tabular steel sections throughout, treated with a hardwearing exterior quality protective finish.
Series ECA and ESE are in gas R407C and in gas R404A. |
|
Complete range from 2.4 to 34 cc / High reliability & top quality components
Specific customized range / Designed to work under 43ºC
Suitable for all refrigerants & applications |
|
- Available for R 134a, R 404A/R507, R 502, R 22 and R 12
- Designed for L/M/HBP application
- Available with low and high starting torque and for tropical applications
- Electrical connections designed for easy service
- High thermodynamic performance
- Customized design to meet specific requirements may include receiver and valves |
|
Condensing units :
• MINI 610 > 3340 W
• MAXI-B 2 > 10 kW
• MEGA 3 > 72 kW
• KS 5 > 75 kW
• MULTIHAVANE 6 > 350 kW |
|
PGC's humidity generating systems are unique. The sources for humidity,
dehumidification, heating, cooling, and circulation are all packaged in
one self-contained unit. This unit is specifically designed to provide 500-
1000 CFM of conditioned air to rooms up to 2200 cubic feet. The conditioner is designed to produce very precise humidity and temperature
control.
Since this generating unit is selfcontained, it can be easily used to
condition existing spaces, small walkin rooms, and custom chambers. The
conditioner can be positioned on top or beside of existing chambers or rooms to circulate conditioned air through the contained space.
FEATURES:
- Precise temperature and humidity control
- High grade temperature compensated humidity sensor
- Stainless steel construction
- High-low or deviation alarms
- Compact Package
BENEFITS:
- Consistent and accurate results
- Confidence in the measured condition
- Durable
- Security and safety
- Easy to apply |
|
PROFESSIONAL DEHUMIDIFIERS (from 57 to 329 l/24h)
DP-MI-01 / DP-MI-02 / DP-MI-03 / DP-MD-01 / DP-BIG-01
Dehumidifiers for swimming pools, Jacuzzi, sausage drying, industrial process, etc...
A large variety of options from equipment with console to equipments with their ductwork.
Covered pools, drying process in food industry and other industries. |
|
Ideal for any requirement in the injection and blow moulding field, Piovan molecular sieve dryers are able to operate with extremely low Dew Point values and reduced energy consumption. Thanks to features such as compact design and flexibility, Piovan dryers can be used as single units as well as in centralised systems feeding several drying hoppers, with on-trolley solution, positioning at floor level or on a mezzanine. For the treatment of non-hygroscopic polymers, hot air dryers are available also for high production potential.
|
|
The BRY-AIR® FFB Compact Dehumidifier is CNC fabricated with powder coated finish and incorporates a high performance fluted metal silicate desiccant synthesized rotor which allows for:
- Reduced Foot Print.
- Increased Performance.
- Lowest Volume/ Weight per CMH.
- Innumerable mounting options.
- Light weight, and can be installed above the false ceiling eliminating the need for floor space.
The FFB Compact Dehumidifier removes moisture through a process of continuous "physical adsorption". The moisture is adsorbed in the dehumidification sector by the fluted, desiccant synthesised rotor and is exhausted in the reactivation sector by a stream of hot air in a counter flow. |
|
| The dehumidication of small and average-sized quantities of polymers may be perfectly carried out with the DD 30 and DD 60 series dehumidifiers. Although these machines have only one silicate cartridge, if the plant is correctly dimensioned, it is possible to easily reach DEW POINT even at 40°C. The temperature control of the dehumidification process is assured by microprocessor system, with a visualization on the panel of the operations carried out and alarms in progress. Silicate regeneration is entirely automatic, the cycle times being personalized by the manufacturer for each machine with the hopper capacity with which it has been fitted, thereby obtaining the maximum efficiency with the least energy expenditure. The original graphics of the control panel facilitate the operator in setting the optimum process temperature, also indicating the minimum stay time in order to obtain a good dehumidification of each material. |
|
Air condensation can operate at temperatures up to 71 °C.
Air condensation technology can be used to air condition a cabinet when there is no industrial water supply.
Apex Technologies is the first to market a range of very high temperature air condensation air conditioners, specifically suited to extremely difficult industrial environments (foundries, forges, iron and stell market, thermal treatement, ovens, cranes...)
This technology is fully compatible with the features of other vertical air condensation air conditioners in our range: cutout, wiring, components, operation without air filters thanks to very wide blades, separation of air flow... |
|
All APEX air-conditioning units are HOMOLOGOUS for the motor industry and are recognised as being among the best performing, above all in harsh environment, such as workshops, factories, forges, foundries, blacksmith's and paint shops.
APEX condensers are specially designed and installed to operate WITHOUT FILTERING ambiant air. Their surfaces and installation are one of the key points in the overall performance of the entire APEX range.
We have developed a specific range of air-conditioning units for outdoor and marine applications. They are portable and/or suitable for operating in all weathers. |
|
+ filterless maintenance-free
+ cooling performances 600...2000 W (L35/L35)
+ space-saving ex./internal mounting
+ flat design-sheet steel housings
+ customer specific painting
+ stainless steel models
+ Microprocessor controls
+ R134a refrigerant
|
|
The Econoclim® are air conditionining units whose operating principle is based on adiabatic cooling. The evaporation of a small quantity of water
requires removing the vaporization heat from the ambient atmosphere, which has the effect of cooling the air. This is exploited in the Econoclim®
unit in order to reduce the temperature of your factory.
Environmental protection:
The evaporation air conditioning units do not use any refrigerants and only consume their own energy, water and electricity. These are simple devices using natural processes.
Economy:
The investment and operating costs are much lower than with the installation of conventional air conditioning.
Efficiency:
The hotter and drier the intake air, the greater the reduction in temperature.
Purification of ambient air:
100% frech air is taken from outside before being distributed in the factory. Frech air is constantly being circulated.
Comfort:
The reduction in temperature and improvement in relative humidity provides comfort for people. Furthermore the evaporation air conditioning units have low energy consumption and are very quiet. |
|
DESCRIPTION:
Coolers conceived to cool, humidify and ventilate small and medium-sized premises or concrete working or machinery areas.
It can also be used for conditioning farms and greenhouses.
Multiple installation positions in order to make easy to place the equipment.
FUEL:
Water
APPLICATIONS:
Ideal equipment to cool and humidify premises that range from 150 to 900 m3 approximately.
|
|
Evaporative cooler "AD" series from 28.000 up to 63.000 m3/h
AD-30 / AD-35 / AD-40 / AD-55 / AD-70
DESCRIPTION:
Coolers conceived to cool and ventilate small and medium-sized premises where it is necessary to have an equipment to cool and humidify premises and other concrete working or machinery areas.
It can also be used for the air-conditioning of farms and greenhouses.
FUEL:
Water
APPLICATIONS:
Ideal equipment to cool and humidify premises that range from 1.125 m3 to 3.150 m3 approximately. |
|
Gas Coolers
Ducon supplies custom engineered evaporative gas coolers and conditioners to cool the gases exhausting from furnaces, kilns, and boilers. Ducon utilizes its proprietary spray nozzles to accurately control the humidity in the gas so as to minimize the corrosion in the equipment. Ducon has designed gas coolers to handle over 1,000,000 ACFM in a single unit.
Ducon also supplies custom engineered gas-to-gas heat exchangers to recover the heat from hot flue gases or to cool the exhaust gases from wet scrubbers. Ducon's heat exchanges are better than rotary type heat exchanges because they do not have any rotating parts and hence require less maintenance.
|
|
Recold MW:
The Recold MW is an induced draft, axial fan design with a weight saving, corrosion free copper coil all in a low height configuration. This Evaporative Fluid Cooler is a ruggedly built unit constructed to provide many years of durable, dependable service with minimal maintenance requirements. Its low profile design simplifies integration into architectural designs and can be placed indoors. Quality materials and workmanship are a key factor in meeting this objective.
Marley MC Fluid Cooler:
The Marley MC steel forced draft counterflow fluid cooler is the ideal solution for sound- and space-sensitive applications.
Recold JW:
The Recold JW is a low noise, forced draft, centrifugal fan design with a weight saving, corrosion free copper coil all in a low height configuration. This Evaporative Fluid Cooler is a ruggedly built unit constructed to provide many years of durable, dependable service with minimal maintenance requirements. Its low profile design simplifies integration into architectural designs and can be placed indoors. Quality materials and workmanship are a key factor in meeting this objective.
Marley MH Fluid Cooler:
Utilizing a low maintenance, hybrid crossflow design, the Marley MH Fluid Cooler is the most efficient fluid cooler in the market. By keeping the process fluid in a clean, closed loop, and combining the function of a cooling tower and heat exchanger into one system, the Marley MH Fluid Cooler provides superior operational and maintenance benefits using CoolBoost™ technology. |
|
COMMON FEATURES
They are specifically designed to cool switchgear or analysis
cabinets in Hazardous areas.
All electromechanical components are certified ATEX, Zone II type Eex-d B or C.
The standard housing is made with AISI304 stainless steel, and upon request AISI316.
The components must be wired at customer care to the cabinet.
As option is available an Eex-d commandbox to control the airconditioner. Upon request other power supplies or temperature classes are available. |
|
Major 2
The Major 2 fan coil unit is designed to be mounted vertically on a wall or horizontally below ceilings to heat and cool homes, businesses and industrial and healthcare facilities. Not only does it combine the economic benefits of installing and operating a central boiler and chiller plant, it also allows individual temperature control in all rooms.
Available in six sizes and two models:
- CH: horizontal cased,
- CV: vertical cased.
Heating capacity: 2 to 20 kW
Cooling capacity: 0.6 to 8 kW
Air flow rates: 115 to 1300 m³/h
- Polymer casing with solid RAL 9010 finish,
- Two access doors lead to air bleed valve and control terminal,
- Water coil: two or four tubes or two tubes and electric heater,
- Condensate drain pan,
- Seven-speed motor (three factory-wired speeds) with balanced, double-inlet aluminium blower wheel,
- Mounting bracket frame,
- Regenerative polyester fibre filter. Efficiency class: G3 (EN 779),
- Fully enclosed electrical junction box,
- A wide selection of control options. |
|
The gas heater KING is an independent appliance that
can be used as a great and convenient alternative to the
standard boiler house heating. With KING you have the
possibility to programme the temperature you want in
the room you need, with the possibility to programme
the temperature in every single room reaching therefore
and energy saving up to 30-40%. It is made up of an
elegant ivory varnished cover, a cast iron heat exchanger
(with control window for inspection pourposes) that
guarantee a very silent working, of a burner with safety
valve and wall flat fume/air kit that ensure a tight working
of the convectors with respect to the inner environment.
KING convectors can be used in houses, laboratories,
bars, shops, offices, and… wherever you want to
save energy! The working characteristics comply with
the standards UNI- CIG7129 for machines type C, gas
fired.
There is also the CLIMA-KING range with models from
7,2 to 13,3 kW which add to the heating function the airconditioning
function for summer time. |
|
Thalassa fan convector are reversible heating and air conditioning.
The offered range includes 4 models and 5 sizes, with powers from 5 kW cold production and 11 kW hot production.
Since there is poor residual pressure with this equipment (20 Pa), they are used preferably for direct blowing either hanging or wall mounted, with or without casing.
Easily integrated in any type of premises due to its discrete presentation and RAL 9010 epoxy painted frame.
Aircalo offers a wide scope of flow control customization. |
|
| Chiller CGD is a economic machine for cooling process waters in the plastics industry, the mechanical and pharmaceutical industries, welding processes, industrial automation, laser technology, EDM, graphics a nd the textile farm ing and food industries. |
|
| Offering exceptional performance levels in terms of efficiency, the units in the new series are able to exploit low ambient air temperature conditions whenever available - all year round. The new range, which extends the existing line of air conditioning units, has been specifically engineered to provide the exceptional reliability demanded in industrial application. Although the maximum saving in energy is obtained during continuous operation of the systems for 24 hours/day, chillers equipped with free-cooling allow very substantial power consumption savings even with short periods of operation, while also guaranteeing longer life expectancy and reduced maintenance requirements when compared to conventional chillers. The operating methods utilized guarantee energy savings typically in excess of 40% with respect to conventional units. |
|
For the supply of fresh air.
Available individually or integrated in the airco application.
In both cases, the HRV technology enables heat exhange between exhaust and supply air. This avoids cold draught and recovers the heat energy lost through ventilation.
When integrated in the air conditioning system, fresh air is supplied without increasing energy consumption. In mid season, when the air conditioning is turned off, the ventilation can work independently
Min. - Max.
Air flow rate (m³/h): 150 - 2000
Dimensions (mm): 269x760x509 - 710x1498x1140
Weight (kg): 24 - 158 |
|
|
|
Air conditioning
