|
|
Aurea 2
High-temperature ground-source (earth or groundwater) reversible heat pump for heating and cooling of individual homes and small businesses. Built with all the necessary hydraulic components on the sensor and emitter side. May be connected to emitters that radiate gentle heat, such as underfloor heating and cooling systems, terminal units (such as fan coil units and water cassettes) or low-temperature radiators
Seven models available
Heating capacity: 9 to 36 kW
- Complete packaged unit,
- Coated, corrosion-resistant galvanised steel casing,
- ABS exterior panel,
- Free-standing inside frame separated from main frame by vibration isolators,
- Scroll compressor,
- Water-cooled brazed plate heat exchangers,
- Hydraulic module on both exchangers, with accelerator pump and expansion vessel,
- Microprocessor-based control unit with MICROCONNECT two-wire remote control.
- Inrush current limiter as standard on single-phase model, as required by French standard NF C 15 100
- Domestic hot-water tank optional. |
|
Ecociat
Recovers heat from exhaust air to heat domestic hot water.
- R410a refrigerant
- Unit completely encased in dual-skin insulated panels
- 1 refrigeration circuit
- 1 high-efficiency scroll compressor
- Brazed-plate condenser
- Evaporator coil made of polyurethane-coated copper tubes with aluminium fins
- Optional intermediate gasketed-plate heat exchanger and circulator
- Three models available
- Flow rate of treated exhaust air: 2000 to 5000 m³/h
- Heating capacity: 10 to 30 kW |
|
*** Cantek Hermetic Condensing Unit ***
Basic Equipment, low cost solution for small cold rooms and refrigrated cabinets and displays.
- Hermetic Compressor
<< (-5/+5 deg. C) from 0,37kW to 1,48kW
<< (-18/-25 deg. C) from 0,74kW to 2,22kW
|
|
Aqualis Caleo
Air-source heat pump for heating of individual homes and small businesses. As it operates in the high temperature ranges (+65°C for an outdoor temperature as low as -12°C), it can be connected to emitters of all types, terminal units (such as fan coil units and water cassettes) or radiators. May be installed in new or renovated housing and buildings to replace or be used in conjunction with a gas or oil-fired boiler. Provides complete autonomy and offers comfort and real energy savings when combined with a domestic hot-water tank and a buffer tank. Designed as standard for outdoor installation without any special weather protection.
Three models available
Heating capacity: 13 to 19 kW
- Complete packaged unit housed in a corrosion-resistant recyclable plastic casing,
- EVI (enhanced vapour injection) scroll compressor,
- Water-cooled brazed-plate heat exchanger,
- Variable-speed propeller fan,
- Inrush current limiter as standard on single-phase model, as required by French standard NF C 15 100,
- Hydraulic module with accelerator pump,
- Microprocessor-based control unit with MICROCONNECT two-wire remote control and self-regulating functions,
- R-407C refrigerant,
- Domestic hot-water tank optional. |
|
New space
Packaged, self-contained rooftop unit intended for air conditioning large surface areas. It is designed for outdoor rooftop installation on the premises requiring air conditioning.
Heating capacity between 20 and 286 kW
Cooling capacity between 19 and 277 kW
Air flow rate of between 4 000 and 46 000 m3/h
Available in 17 models and 2 versions:
- M0: Standard version - All-air return,
- MT: Version with a fixed fresh air inlet for the intake of a minimum amount of clean fresh air which can be manually adjusted using a damper,
- MS: Version with motorised damper at the air return and for the fresh air, thereby providing free-cooling operation when needed,
- ME: Version with motorised fresh air intake damper for the fresh air and at the air return + extraction propeller fan
- MK: Version with motorised fresh air intake damper for the fresh air and at the air return + automatic extraction damper which opens when there is a positive pressure in the room
- MA: Version with motorised intake damper at the air return and for the fresh air for free-cooling operation + an air return propeller fan with adaptable extraction damper depending on the positive pressure in the room,
- MC: Version with motorised intake damper at the air return, for the exhaust air and fresh air for free-cooling operation + an air return centrifugal fan to ensure the flow of exhaust air is equal to the fresh air intake flow.
- RPF: Cold only,
- IPF: Hot or cold reversible |
|
Heat problems in data centres can only be avoided through the implementation of new modular climate control concepts. Due consideration must be given to parameters such as temperature, humidity, the velocity, pressure and direction of air flows, as well as the heat losses of the installed components.
Rittal RimatriX5 offers the solutions:
- Passive cooling (utilising the ambient air)
- Active, rack-specific cooling
- High-performance cooling for temperature-neutral data centre expansion
In each case, the systems are tailored exactly to your specified wishes and application requirements, taking into consideration all ambient conditions. Software-assisted planning tools minimise investment outlay and provide for maximum peace of mind. |
|
J & E Hall International are able to design marine water chillers for both commercial and navy use. Navy chillers are designed for high shock loads and conform to SOLAS & Lloyds Register of Shipping.
Marine water chillers are available from 300 kW to 5,000 kW cooling capacity and marine low temperature chillers from 150 kW to 2,000 kW cooling capacity.
please refer to the "Chiller Design Check List" under literature available before submitting your enquiry. |
|
DESCRIPTION:
Equipment conceived to cool and ventilate terraces, night clubs, tents, working areas, vegetable warehouses, gardens, etc., where it is necessary a breeze of fresh and humid air to comfort people or for food conservation.
FUEL:
Water
APPLICATIONS:
Ideal equipment for cooling and humidifying premises that range from 165m3 to 275 m3 approximately. |
|
DESCRIPTION:
Air conditioner conceived to cool and ventilate terraces, night clubs, tents, working areas, vegetable warehouses, gardens, etc., where it is necessary a breeze of fresh and humid air to comfort people or for food conservation.
Completely ecological equipment which only needs water connection and a single-phase electric connection for working.
FUEL:
Water
APPLICATIONS:
Ideal equipment to cool and humidify premises that range from 165 to 275 m3 approximately. |
|
DESCRIPTION:
Coolers conceived to cool and ventilate small and medium-sized premises where it is necessary to have mobile equipment to cool concrete working or machinery areas.
It can also be used for conditioning farms and greenhouses. It can be installed in the interior of the premises or on the wall with its base shelf (it can be used with opened doors and opened windows.)
FUEL:
Water
APPLICATIONS:
Ideal equipment to cool and humidify premises that range from 340 to 625 m3 approximately. |
|
| Extensive experience and expertise in the design, manufacture and service of compressor and refrigeration technology has established Toromont Energy Systems as a leading supplier of products and services to the specialty gas process industry. From SCR systems for reducing stack emissions to PSA/VSA modules and oil adsorption systems, we engineer and manufacture these specialty process systems to meet unique customer needs. |
|
| With a compact design the 600mm x 600mm ceiling unit neatly fits inside a standard ceiling module which minimises any installation work. The user can select between 2-way, 3-way or 4 way operation of auto swing louvers. With the twisted wing design of the compact turbo-fan the noise level is just 25dB (sleep mode). |
|
+ filterless maintenance-free.
+ cooling performances 600...2600 W (L35/L35)
+ space-saving recessed mounting
+ flat design sheet steel housings
+ customer specific painting
+ stainless steel models
+ Microprocessor controls + R134a refrigerant
|
|
| The Summit range is an DC inverter PAM driven heat pump system operating with R410a and available with wall mounted indoor units giving 2.0Kw, 3.5Kw, 3.5Kw or 5.0Kw cooling (nominal)capacities. |
|
Air conditioning for your home? Our Split range offers solutions for up to 7 rooms.
You can choose from:
- wall mounted,
- floor standing,
- flexi type,
- concealed ceiling indoor units.
Daikin air conditioning units are easy to install, easy to use, ultra reliable, quiet and come in an elegant and up to date range.
Min. - Max.
Capacity (kW): 1,8 - 9,5
Power input (kW): 0,24 - 3,07
Sound power (dB(A)): 50 - 62
Weight (kg): 8 - 18
Dimension (mm): 273x784x185 - 298x1050x190
Refrigerants: R-410A or R22
Outdoor unit: non-inverter or AC- or DC-inverter
available in cooling only and heat pump
Eurovent certified |
|
Mini size Maxi cooling for small enclosures
+ filterless maintenance-free
+ cooling performance 200...500 W (L35/L35)
+ for external, internal & top mounting
+ flat design sheet steel housings
+ customer specific powder coat painting
+ stainless steel models
+ Micro-processor controls
+ R134a refrigerant
|
|
The APEX range of roof-mounted cabinet air conditioners automatically includes a UNIQUE fixing frame to reinforce the cabinet roof and keep it flat.
This avoids the "bowl" phenomenon that occurs with use and causes seepage of oil condensation, etc.
Your cabinet's leaktightness is further guaranteed by a polyurethane seal heat-sealed to both faces of the frame.
The electrical and cooling components of this range of horizontal air conditioners are identical to those of the range of vertical air conditioners. |
|
Filterless cooling via the cabinet roof
+ filterless maintenance-free
+ cooling performances 200...3000 W (L35/L35)
+ space-saving top mounting
+ stainless steel housings available
+ Microprocessor controls
+ R134a refrigerant
|
|
Powerfull cooling and/or heating installations for industrial, agricultural and commercial use.
You can choose from:
- air cooled chillers
- water cooled chillers
- condenserless chillers
Daikin chillers are know in the market for their advanced technology, high reliability and quality and for their energy efficiency.
Min. - Max.
Capacity (kW): 9,1 - 685
Power input (kW): 3,71 - 169
Sound power (dB(A)): 64 - 99
Weight (kg): 113 - 3360
Dimension (mm): 600x600x600 - 2000x2672x898
Refrigerants: R-134a or R-407C
HP: 5 - 200
Eurovent certified |
|
Dual discharge unit coolers :
• GTI 10 > 78 kW
• GT2I 20,5 > 123,5 kW
Cubic unit coolers :
• NK 6 > 130 kW
Unit coolers for blast freezing tunnels :
• NW 4 > 63 kW
• NQ 7 > 73 kW
• NF 35 > 110 kW
Centrifugal unit coolers :
• NC 5,2 > 80 kW |
|
|
|
Air conditioning
