|
|
Full range of heating cabinets gas or oil fired.
Available in vertical or horizontal versions, inside or outside and able of ducted appications.
Air flow from 6000 to 60000 m3/h and power from 70 to 1120 KW.
High temperature resistant steel exchanger or stainless steel.
For various cases, the body can be double skin.
Filtration optional.
Applications : Industrial buildings heating and/or ventilation with sveral kind of applications for high level confort for users.
This equipment is in accordance with European directive related to gas fired equipment 90/396/CEE under n° 49AQ1369 and 1370 and electro-magnetic compatibility CEM 89/336/CEE and low voltage 73/23/CEE. |
|
Craftsmen and construction workers value the many advantages of the practical heaters of the DZH series. Handy and problem-free to use, they are preferably suited for the de-icing or heating of construction materials, vehicles, equipment, water pipes, supply lines, and so on. These devices also provide for effective, immediate heat in closed, well-ventilated rooms
- Installed oil burner in a high-pressure system for EL heating oil or diesel
- Stainless steel combustion chamber
- Direct heater with 100% efficiency
- Integrated tank or Oil-reservoir fitting
- Easy to transport
- Fully automatic controls |
|
These equipment may be connected either with vertical or horizontal vent or through a chimney.
These aerotherms do meet the main requirements of the CE standards requirement related to gas-fired aerotherm.
CAUTION :
These equipment can only be used in sufficiently aerated premises, except where a tight connection is provided.
The proper operation of the aerotherm depends on a correct installation and start-up.
Aerotherm should not be installed in :
- Hazardous areas
- Premises containing vapours of chlorinated combination
- Areas with high contents of inflammable dusts
- Highly humid rooms. |
|
DESCRIPTION:
Gas domestic hot air generator with leakproof operation and smoke outlet through an extractor.
Its operation is completely autonomous and its function is that one of heating the environment air of the premises that must be conditioned.
The basic equipment has the following elements:
- Leakproof combustion with forced draft.
- Combustion oven designed for obtaining a performance of about 90%.
- Three-speed fan (except for the GAS-40 model, which is one-speed).
- Air admission filters.
- Environment thermostat.
- Air impulsion grid on the upper part (GAS-08-12-15).
FUEL:
Natural gas / LPG
APPLICATIONS:
Any kind of premises with a volume between 190 m3 and 980 m3.
|
|
SYSTEMA introduces the new series of EOLO, suspended warm air heaters able to solve all heating problems, both for total and modular space heating. Compared with traditional heating systems needing a separate cabinet, the new EOLO heaters offer an innovative solution for heating while keeping running costs at a minimum.
This is possible thanks to the fact that EOLOs are completely self-sufficient working units, and that you don?t need to heat up a heat transferring fluid such as water for heating the space. In this way you don't have any needless heat losses.
|
|
| The heaters are used successfully by farmers and gardeners. Whether in well-ventilated stalls, equipment sheds, or greenhouses, their mobility makes them practical and universal. The heaters are delivered ready for plug assembly. They are ready for operation after connection to the 230-volt a.c. mains and to propane gas cylinder(s). For energy savings, the devices can be delivered in automatic design (PGT) with a room thermostat that is ready for plug assembly. |
|
A RANGE OF CERAMIC GAS HEATERS ADAPTED TO ALL HEATING NEEDS IN INDUSTRIAL BUILDINGS (height of 4 meters and more).
Use: Industrial buildings, Churches, Sports halls, Car service, Terraces, ...
- a large range of heaters from 2,5 to 27 kW and more.
- a choice of 10 powers for a comfort in all type of buildings whatever the
hanging height of the heaters
- a double-speed option for a better comfort, particularly in well insulated
buildings |
|
A range of gas-fired furnaces with 2 or 4 burners. In full compliance with applicable safety regulations.
All models are equipped with a safety valve that interrupts the gas supply if the flame is extinguished. Economical, fast and clean: ideal for versatile operations.
Typical applications: heating of metals prior to working and creation of ornamental and other products. |
|
A highly innovative and revolutionary product in comparison with the traditional systems up till now before the 'INFRA BAF' sealed gas radiating modules appeared on the market.
SYSTEMA S.p.A. is proud of its product, the 'INFRA BAF' line, and believes that it has made a fundamental contribution to the renewal of animal rearing techniques, achieving - with 'INFRA BAF' - optimum environments for the growth of genetically evolved animals today. The reduction of management costs, with the consequent increase of the overall profitability of the farm, will satisfy the end user and totally pay back the investment incurred in using 'INFRA BAF' modular units in his farm.
|
|
Farming hot air generator completely autonomous with heating gas oil, natural gas or liquefied petroleum gases (butane gas, propane gas) operation.
These equipments function is that one of heating the environmental air by means of the thermal energy produced by the equipment.
The produced heat is driven to the premises that must be conditioned by means of a centrifugal fan.
The combustion products are extracted through a chimney in order to ensure that the driven hot air is exempt of smokes and bad smells.
The main features are the following ones:
-Heating gas oil, natural gas or liquefied petroleum gases operation.
-Closet made with galvanised sheet.
-Heat exchanger dimensioned in order to obtain performances superior to 90%, made with AISI-430 stainless steel.
-Combustion chamber made with AISI-304 stainless steel.
-Control panel made in a watertight box for avoiding the high humidity degree in greenhouses.
-Reinforced environmental thermostat with 5m hose and fast connector included in the equipment.
-Base equipment prepared with air impulsion grid of simple deflection.
-It can have circular hoppers or any other kind of impulsion pipes coupled on it. |
|
| WATERSTRIPs (radiant thermal strips) are suitable for heating large industrial and civil buildings by radiation. They are the best solution where low-noise operation, no air flow, and no dust circulation is required. WATERSTRIPs are suitable to heat rooms housing inflammable mixtures without any problem. No air flow and low stratification ensure low running costs. |
|
HEATING PANEL
Ultraflat flexible resistances of type PTF for radiating panels.
The resistance is equipped of biadhesive and comes applied directly on a panel of painted metal.
The thickness of the resistance is of 280 µ. Supply voltage 230V (realizable in all the mains voltages), power 0,2 W/cm ². The realization of independent fields with differentiated powers is possible.
The found maximum temperature on the panel is of ca. 90°C. The control of the temperature comes carried out for means of a bimetallic thermostat.
Dimensions and type of logons electrical workers on detailed lists of the customer.
|
|
A RANGE OF CERAMIC GAS HEATERS ADAPTED TO ALL HEATING NEEDS IN INDUSTRIAL BUILDINGS (height of 4 meters and more).
Use: Industrial buildings, Churches, Sports halls, Car service, Terraces, ...
- a large range of heaters from 2,5 to 27 kW and more.
- a choice of 10 powers for a comfort in all type of buildings whatever the
hanging height of the heaters
- a double-speed option for a better comfort, particularly in well insulated
buildings |
|
With Watlow's diverse RAYMAX® radiant heater line, we have a solution for almost any application requiring radiant heat. Our capabilities cover a wide range of needs, from contamination-resistant panel heaters to fast-responding quartz tubes to rugged tubular elements and high temperature ceramic panels.
Applying radiant heaters can be complicated. Watlow's engineering staff has the level of training required to help you meet your application requirements, providing a high degree of technical support such as conducting testing for your application at our facility, calculating your watt density and temperature requirements, and recommending system components such as sensors and controllers. With our experience in a wide range of industries, chances are Watlow has already helped someone handle a radiant heating application like yours.
Applications
Thermoforming
Food warming
Paint and epoxy curing
Heat treating
High temperature furnaces
Tempering and annealing processes |
|
| Caloritech™ Infrared Radiant Heaters are available in a variety of configurations for both comfort and process heating applications, including single or double reflector, and single or double element. A range of emitters are available, including quartz lamp elements, quartz tube elements, tubular (Calrod type) elements and hairpin tubular elements. A wide variety of options for wattage, voltage, size and energy spread are available, depending on the application. |
|
Innovative Plaque Heaters with a range of outputs (manual version) or fully modulating (Automatic version).
EASY & SAFE:
- Maximum efficiency in all conditions
- Very flexible mounting, even angled, maintaining high output radiant performance
- Considerable Infrared performance even when installed at maximum height
- Can be mounted on walls to maintain maximum radiant heating cover. |
|
A RANGE OF CERAMIC GAS HEATERS ADAPTED TO ALL HEATING NEEDS IN INDUSTRIAL BUILDINGS (height of 4 meters and more).
Use: Industrial buildings, Churches, Sports halls, Car service, Terraces, ...
- a large range of heaters from 2,5 to 27 kW and more.
- a choice of 10 powers for a comfort in all type of buildings whatever the
hanging height of the heaters
- a double-speed option for a better comfort, particularly in well insulated
buildings
|
|
Hanging irradiation heating unit suitable for heating big environments.
Including a heat generator with power from 35 to 300 kW and a radiating circuit with average surface temperature of 200-250°C.
The circuit layout is optimized according to the environment to be heated .
It is the best solution for huge environments where a good level of thermal comfort is required. |
|
OHA radiant strips are especially fitted for infrared heating of industrial, commercial and sports' buildings up to any type of height. They are on the contrary especially fitted for very high buildings which require large radiant surface with lower surface temperatures.
OHA system does not move the dust in the air, it does not take any space on the floor and its maintenance is extremely reduced. The characteristic of the gas combustion head in premix and afterburning at low NOx emission and high efficiency. The radiant pipe circuit diameter 200/300mm assure a high thermal emission. A special insulation above the radiant strips raises further the radiant yield on the floor.
|
|
Equipments suited for all environments with great height (form 4 to 20 meters) or with high thermal dispersion.
It includes a burner unit and a heat exchanger tube which reaches the temperature of 400 ÷ 550 °C., providing a very high radiation efficiency, also by means of the reflecting cover located over the tubes, which focuses the thermal flow downwards.
By means of a centralized equipment control system it is possible to heat only the areas concerned by operations |
|
The INFRA radiant module is the most classical expression for infrared heating for industrial buildings, sportshalls, ware-houses, poultry farms and glasshouses. The machine is made up of a burner working with forced induction in premix type Baf, with a multi gas head, exhaust fume electro fan, heat exchanger made up of special heat treated steel radiant pipes for high temperature; stainless steel reflecting metallic parabole and support hangers. It has low thermal inertia, and can heat single zones also with limited dimensions activating single modules, it does not move the dust in the air, does not take any space on the floor, it heats the bodies but not the air, so this means that the lower is building insulating, the higher are fuel savings that are achived with infrared radiant tubes.
|
|
2 solutions available : Radiant heaters « U-tube » (U) or linear (L)
Alimentation Natural Gaz or Propane, horizontal or inclined
4 sizes 13 / 22 / 35 / 50 KW
Option : Régulation, stainless steel reflectors, double skin, dilatation rings …
Various accessories : Regulation kit, fume kit, gas conection kit ... etc |
|
These particularly robust appliances have been designed to provide reliable heating for industrial and technical premises, control rooms and mobile site cabins. Connection via gland to a IP55 IK7 aluminium terminal box.
Protected steel brackets and body.
available with an integral control thermostat, adjustable from 0 to 50°C.
Horizontal fitting. |
|
REMKO VRS heaters correspond to the highest technical standards. Without a time-consuming installation as conventional hot water heating systems. The devices are suited not only as individual units, but also as centralised units for warmth channel connection. Extensive special accessories on the intake and outlet sides are available. The intake air is heated via a heat exchanger by an oil or gas burner and evenly distributed in the room using a low-noise radial fan.
In summer, the fan provides pleasant fresh air. The program selection with heat outputs between 33 and 495 kW always permits an appropriate device choice. |
|
The VAPORAD steam radiant panels are used to heat industrial or civil buildings that are particularly concerned with fire prevention.
This system is able to completely fulfil the requirements of a system that must run silently and not cause air movement, heating both large and small spaces.
The lack of air movement and the reduced heat stratification keeps operating costs particularly reasonable.
The steam panels create a greater heat output compared to panels heated with hot water and guarantee a larger amount of diffused heat per radiant surface |
|
Melody
The MELODY cassette is designed for installation in ceiling voids to cool and heat private and open-plan office spaces, conference rooms, commercial premises, and lobbies. Not only does it combine the economic benefits of installing and operating a central boiler and chiller plant, it also allows individual temperature control in all rooms.
Five sizes available
Heating capacity: 2 to 40 kW
Cooling capacity: 1.5 to 13 kW
Air flow rates: 290 to 1690 m³/h
- White return air/supply air grille,
- Corrosion-resistant galvanised steel casing,
- Water coil: two or four tubes or two tubes and electric heater,
- Condensate drain pan made of injection-moulded polystyrene,
- Five-speed motor (three factory-wired speeds) with balanced polymer blower wheel,
- Mounting bracket frame,
- Washable polyester fibre filter. Efficiency class: G2 (EN 779),
- Electric heater controlled by electronic circuit board with quick connectors,
- A wide selection of control options available |
|
Coadis
The COADIS cassette is designed for installation at one end of a ceiling void to heat and cool private and open-plan office spaces. Not only does it combine the economic benefits of installing and operating a central boiler and chiller plant, the COADIS system also allows individual temperature control in all rooms.
Available in three sizes and two versions (classic or raised)
Heating capacity : 1.4 to 12 kW
Cooling capacity: 1 to 4.5 kW
Air flow rates: 100 to 770 m³/h
- Bottom return/supply panel with RAL 9010 finish blends in seamlessly with suspended ceiling tiles. Includes a perforated metal return air grille, a quick-remove filter holder and high-induction, directional round nozzles that use the Coandã effect to keep the air stream moving along ceilings,
- Water coil: two or four tubes or two tubes and electric heater,
- Polymer condensate drain pan. Sloped to prevent standing water. With multi-diameter reversible drain pipes,
- Seven-speed motor (three factory-wired speeds) with balanced, double-inlet blower wheel,
- Mounting bracket frame,
- Aluminium foil-coated foam thermal and acoustic insulation,
- Flexible filter medium made of regenerative polyester fibre. Efficiency class: G3 (EN 779),
- Fully enclosed electrical junction box,
- A wide selection of control options. |
|
DESCRIPTION:
Hot air heater that operates with solid waste, as for example dry wood, coal, husks, cardboard, etc.
Since it is an equipment which uses natural elements as a fuel, it can be classified as an equipment of biomass.
The range is composed of a 69kW model.
For technical specifications and a complete description, go to "READ MORE" and download "DOWNLOAD TECHNICAL INFORMATION ".
FUEL:
Wood, coal, husks, etc.
APPLICATIONS:
Whatever premises that need a heating system in which the fuel to be used is wood or a similar material. |
|
|
|
Heating equipment
