Fire prevention equipment

85 companies | 304 products
Filters
fire alarm control panel - FC721

The FC721 from SIEMENS is capable of processing signals from Cerberus PRO devices up to 126 addresses and are controlled via remote when connected to fast Ethernet. This fire control panel can be...

fire alarm control panel - FC722

The FC722-ZE fire control panel has two-loops in its housing which can be extended to four-loops. It is a compact design containing an operating unit capable of processing signals from Cerberus™...

break glass manual call point - FDM221

Siemens FDM 221 addressable manual call points are designed for immediate manual engagement of...

multi line separator - FDCL221

Sinteso input/output modules are components that allow monitoring of devices for alarms inputs, confirmation signals, or technical states. These modules also allow control of...

fire detection systems terminal - FT2010-A1, FT2011-A1

Cerberus PRO offers floor repeater panels designed to provide a quick overview on floor level. The device include floor repeater display FT2011 and the floor...

{{productDetail[70966]}}
firefighting pump controller / diesel engine - 12 - 240 V | DIESEL Plus

The DIESEL Plus Fire Pump Controllers from Eaton Corporation are designed to control...

firefighting pump controller / electrical - LMR Plus series

The original microprocessor-based LMR Series continues to improve and a newly...

medium-voltage pump controller / firefighting - FDM

The FDM Medium Voltage Fire Pump Controller is based on the AMPGARD controller...

{{productDetail[9191]}}
firefighting pump controller / electrical - 110 - 600 V, 5 - 50 HP | Firetrol FTA550E XG

Utilizing across the line, full voltage starting the FTA550E is the preferred controller...

firefighting pump controller / electrical - 200 - 600 V | Firetrol FTA740

Firetrol® FTA740 Single Phase Limited Service Controllers are intended for use with...

firefighting pump controller / diesel engine - Firetrol FTA1100-H

Firetrol® FTA1100H combined automatic and manual Mark II based diesel engine fire pump controllers are intended for starting and monitoring fire pump diesel engines in Class1, Division 2 hazardous locations. The controllers have a temperature...

medium-voltage pump controller / firefighting - 2 200 - 7 200 V, 1 500 - 3 500 HP | Firetrol FTA2000

Firetrol FTA2000 is an automatic and manual class E2 voltage controlled made for managing squirrel cage motors...

fire alarm control panel - Firetrol FTA200 A

Emerson's Firetrol FTA200 are alarm panels which are constructed to achieve the NPFA 20 specifications that need a remote alarm panel in case the pump house is not...

{{productDetail[7027]}}
addressable break glass manual call point - IP42 | 4433

The Manual Call Point (m.c.p.) features a flawless structure that conforms with the EN54-11 standard....

enclosed addressable fire alarm pull station - 4439

The Manual Call Point (m.c.p.) features a flawless structure that conforms with the...

addressable multipurpose fire alarm control panel - IP54, IP66, IP67 | 3361

Panasonic's addressable systems are capable of delivering dual-program inputs and outputs....

{{productDetail[14692]}}
push button manual call point - PS series

"Evacuation" and "Emergency" stations available
Quick reset
Cover with alarm discourages tampering
ADA Compliant
UL...

explosion-proof manual call point - 120 V, 60 Hz | MPEX

Available in 120VAC
Highly visible red enclosure
Lift cover and pull down ring to activate
Approved for Class I, Division 1 explosionproof applications
UL and ULC Listed, CSA Certified, CSFM Approved

Model MPEX...

{{productDetail[9256]}}
fire protection holding solenoid - 24/48 VDC, 20/50 daN |V7RMF2

The TEC AUTOMATISMES V7RMF2 series electromagnetic door holders are used for different applications, mostly in fire security. They are completely NF S 61 937 and NF EN 1155 compliant, and feature...

fire protection holding solenoid - 24 - 48 VDC , 20 - 50 daN | V7R2

For fire security of infrastructures this voltage cut-off hold magnet is used. The product conforms to NF S 61 937 and NF EN 1155 standards. It is contained...

fire protection holding solenoid - 24 - 48 VDC, 20 daN | V7E2

The TEC AUTOMATISMES V7E2 series electromagnetic voltage cut-off holding solenoids are commonly used for fire safety applications and infrastructures. They are completely...

fire protection holding solenoid - 1.2 W, 50 daN, 24 - 48 V | VEM50R

The voltage cutoff hold magnet finds major use in infrastructure fire security as it conforms to NF S 61 937 and NF EN 1155 standards. The...

fire protection holding solenoid - 150 - 500 mm

The Holding solenoid is made with both fixed or adjustable length support for holding mounting magnets and for fire...

{{productDetail[8614]}}
fire alarm control panel - Cheetah Xi

It's only a few seconds, right? Yet in a fire situation, that can be an eternity. When it comes to potential fire and smoke damage to your critical assets, you deserve the best information and the fastest response time. The Cheetah Xi® intelligent fire suppression control system is the ideal choice...

fire alarm control panel - 120 - 240 V | SHP-PRO®

SHP-PRO is THE reliable, conventional fire suppression system for smaller applications. Unmatched in the industry for sheer versatility and ease of installation, this single-hazard control system boasts incredible power and can be easily configured...

fire safety management software - SpyderGuard™

SpyderGuard is our state-of-the-art monitoring, investigative and administrative tool and is designed to seamlessly access multiple FSM-IP servers over an...

fire alarm system - FAAST

Fike's FAAST is very early warning fire detection featuring the latest in Fire Alarm Aspiration Sensing Technology. Compatible and complementary to each of Fike's fire...

control module - EPSMS

Fike's EPSMS (Emergency Power Shutdown Management System) is designed to consolidate and control equipment emergency power off in a timely, efficient and coordinated manner. This system improves the reliability...

{{productDetail[30490]}}
fire alarm control panel - Cheetah Xi®

t's only a few seconds, right? Yet in a fire situation, that can be an eternity. When it comes to potential fire and smoke damage to your critical assets, you deserve the best information and the fastest response time. The Cheetah Xi® intelligent fire suppression control system is the ideal choice...

fire alarm control panel - 120 - 240 V | SHP-PRO

SHP-PRO is THE reliable, conventional fire suppression system for smaller applications. Unmatched in the industry for sheer versatility and ease of installation, this single-hazard control system boasts incredible power and can be easily configured for use within a wide range of industries and fire suppression...

fire safety management software - SpyderGuard™

SpyderGuard is our state-of-the-art monitoring, investigative and administrative tool and is designed to seamlessly access multiple FSM-IP servers over an enterprise-wide...

fire alarm system - FAAST

Fike's FAAST is very early warning fire detection featuring the latest in Fire Alarm Aspiration Sensing Technology. Compatible and complementary to each of Fike's fire alarm and fire suppression systems, this technology uses an advanced, intelligent smoke detector...

control module - EPSMS

Fike's EPSMS (Emergency Power Shutdown Management System) is designed to consolidate and control equipment emergency power off in a timely, efficient and coordinated manner. This system improves the reliability...

{{productDetail[30491]}}
control module - EPSMS

Hubbell Fire pump Motor Controllers are designed to comply with the latest standard of the National Fire Protection Association for the installation of stationary pumps for...

control module - EPSMS

Hubbell Fire pump Motor Controllers with Automatic Transfer Switches (ATS) are designed to comply with the latest standard of the...

firefighting pump controller / diesel engine - HD5000

The HD5000 Fire Pump Controllers are a microprocessor based combined automatic and manual diesel engine driven fire pump controller. These controllers are specifically designed and tested to start, and monitor fire pump diesel...

fire alarm control panel - LX-908

The LX-908 remote panels are designed to meet the NFPA 20 specifications requiring a remote alarm panel when the pump house or pump room is not constantly attended. These alarm panels can be used...

{{productDetail[16890]}}
fire alarm control panel / adressable - 5541M series

27 tones (Millennium)
4 zone control
Audio, voice & power supervision
Microphone & external input supervision
Up to four five-second voice messages
Hand-held microphone paging
Phone paging from PBX systems
Up to 32 satellite units addressable through RS485
Output and trouble relays designed for fail-safe operation
Top, side and bottom knockouts...

fire alarm system - 5560M series

The Edwards 5560M Millennium Mini-Mi is a compact tone and voice generator which is completely modular in construction. The 5560M base unit is supplied with or without a 110 candela strobe. One of five optional modules may be installed in the base unit.

The 5560M is configured for stand-alone operation when installed with the 556T-M Tone Module Baord. One tone may be dipswitch selected...

fire alarm pull station - 270 series

Die cast metal construction

Terminal strip wiring

Break glass type

Single action



The 270 Series fire alarm pull station is for fire...

addressable fire alarm pull station - E-270, E-278

Edwards intelligent manual pull stations are engineered to deliver high-performance features, superb reliability, and unbeatable quality. From control of ancillary equipment, to enhanced signaling functionality, these products add flexibility and powerful options to Edwards Signaling intelligent systems.

Designed expressly for small...

{{productDetail[9260]}}
fire alarm control panel - 17 - 28 V

When combined with a Message controller, voice sounders can transmit...

fire alarm system - max. 98 dB | Klaxalarm

The Klaxalarm Terrier is a stand alone, self-contained fire alarm



Battery...

{{productDetail[15275]}}
fire protection holding solenoid - 20 - 80 mA | VIR20245048

- EN 1155 Certified
- All the fire door holder magnets include articulated
and fix armature plate
- HRV High Resistance to Vandalism...

{{productDetail[72354]}}
firefighting pump controller - FireEye

The installation of FireEye can alleviate system failures and may reduce - if not prevent - significant faults, costs, downtime and even loss of life. All applications including warehouses, factories, schools and offices can employ and benefit from this concept....

{{productDetail[21773]}}
roll-up door / fireproof  - 692

The 692 fire rated roller screens are ideal for situations with a limited available...

roll-up door / fireproof  - 693

The 693 fire rated roller shutters...

fire-rated door / sliding - 694

The 694 fire rated sliding doors close automatically. They form an economically...

sliding door / with escape way function / fireproof  - 695

The automatically closing 695 fire/escape door is used in fire resistant...

{{productDetail[18497]}}
intrinsically safe push button manual call point - GRP - GNExCP6BP

GNExCP6BP - Push Button Call Point GRP

Push button with optional protective cover to prevent nuisance tripping. It is protected by a spring loaded cover therefore the switch requires two-way action activation. It can be reset by...

intrinsically safe break glass manual call point - GRP - GNExCP6BG

GNExCP6BG - Break Glass call points GRP

The Break glass call point is approved for Zone 1, 2, 21 and 22 hazardous areas for the control of fire and gas alarm systems. Available with either single or double...

{{productDetail[7632]}}
intrinsically safe break glass manual call point - GRP - GNExCP6BG

When clearance is less than 650 mm, horizontal sliding doors can be installed.

The...

{{productDetail[28630]}}
explosion-proof manual call point - BGX

TECHNICAL CHARACTERISTICS
EC type examination certificate
LCIE 03ATEX6069 X
Type approved : AD531008
Zones...

{{productDetail[20906]}}
fire protection holding solenoid - FT series

The FT 65 is a holding solenoid manufactured by Kuhse. It is suitable for use in fire...

{{productDetail[62796]}}
fire protection holding solenoid - FT series

LICO Alarmpanel for LICO HDL Heat-, Overheat-...

{{productDetail[57861]}}
fire detection and alarm unit - ML-121X series

Maxlogic series fire alarm control panels, offering high performance by the VIP communication protocol, provide 254 address capacity with its expandable...

fire detection and alarm unit - ML-1280 series

Ability to monitor graphically for all Maxlogic fire alarm system small site and big site applications. ML-1280 7 TFT Mimic Panel contains stylish exterior design and Surface Mount Technology(SMT) production...

adressable control module - 8 A, 250 V | MG-6700

The module has one relay output with volt-free,...

adressable control module - MG-6300, MG-6400 series

MG-6300 Sounder controller, 1-way output

MG-6308 Sounder controller, 8-way output

The modules...

firemen's telephone - ML-5011 series

Maxlogic analogue addressable system firefighter...

{{productDetail[35525]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation