Fire suppression systems

120 companies | 514 products
Filters
  • What’s new?
    Submit

The FLIR K-Series is widely known for the thermal imaging cameras intended for fire fighting operations. To continue, this top of the line device is very essential...

{{productDetail[7945]}}

The actuators of OpenAir are made for fire protection dampers within the interface which contains a unified protection system and people as they operate reliably particularly in times of emergency....

{{productDetail[70966]}}

The DDH line pumps have horizontal configurations and two stages. A double suction set works on the first stage in particular. The balancing...

{{productDetail[23312]}}

The Flowserve HED is a radially split, two stage pump designed...

The MEN Overhung, End Suction Industrial Process Pump is a heavy-duty tool...

{{productDetail[6194]}}

The PYRO WAS RT is a fire-service folding hose. It has special features such...

{{productDetail[14764]}}

- Roof fan
- Dual purpose: smoke extraction and ventilation for all types...

{{productDetail[22453]}}

The DIAS fire detection surveillance systems of the PYROVIEW 380L and 640 L/PYROSOFT FDS series are a perfect choice for quick fire recognition inside bunkers or free air dumps of waste...

{{productDetail[35299]}}

Dry powder fire extinguishers are suitable for mixed fire risk environments and are especially suitable for flammable liquids and fires involving flammable gasses such as methane, propane, hydrogen, natural gas etc. Multi-purpose powder extinguisher interferes with the combustion process and provides rapid-fire knock down.

The range offers...

Modern stylish fire extinguisher stand
Suitable for all flat bottomed 6-12 kg extinguishers and 2 kg CO2 extinguishers
Ideal...

Modern stylish fire extinguisher stand
Suitable for all flat bottomed 6-12 kg extinguishers and 2 kg CO2 extinguishers
Ideal...

The original design from Jonesco.

Suitable for all portable fire...

Suitable for 6-9 kg extinguishers (powder, foam, etc)
Fully recyclable,...

{{productDetail[31893]}}

AFW Lufttechnik GmbH FW presents a single fire brigade extractor. An exhaust hose hanging from the ceiling is fastened to the exhaust pipe with the help of an exhaust grommet and clamping...

The FW extraction system is an effective extraction unit mounted on the top of the fire brigade automobiles. On the extractor front side a pneumatic coupling is fixed to the exhaust pipe that makes it 100 % vacuum sealed....

The Magna Track Basic is an element extraction framework mounted on a runner for flame detachment vehicles. The extractor in the runner goes with the vehicle when it drives out, discharging itself consequently from the vehicle at the entryway...

{{productDetail[65992]}}

The DN 25-65 is a freely adjustable coupling for fire hose that is available...

{{productDetail[8958]}}

The 3600 from Hannay Reels has a special design that can endure fire. The device is equipped with an aluminum stainless steel, supplied with spring...

The 3100 Series Reel of the Hannay Reels® is used for industrial fire protection which can handle hose sizes ranging from 3/4" I.D. through 1-1/2" I.D. It is normally...

1½" Manual or Power Rewind Reels are strong and heavy reels that feature a gear-driven crank rewind or chain and sprocket drive that is powered by an electric, hydraulic, or compressed air motor....

The Hannay 3600 series is a reel made for industrial fire protection. This steel reel can accommodate a modular inlet of 1-1/2"...

Hannay's 3600 Series Reel Housing Structure has been made out of steel materials, with aluminum or stainless steel-material constructions available upon request. This enables the unit to deliver industrial fire...

{{productDetail[7341]}}

The ZM I-II model engineered by RuhrPumpen, is a centrifugal pump enclosed in an axially split case. This device is a dual stage horizontal pump consisting with...

The LVZ pump is a radially split single entry volutecasing centrifugal pump, mainly used in floating docks and also as a fire protection...

{{productDetail[38190]}}

Rupture discs and Safety valves may be used independently as primary safety devices or in conjunction.
Flame arresters...

{{productDetail[23181]}}

Fire blankets
STANDARD :
BS EN 1869
USE :
The fire blanket is useful for the protection of the men and the material. It must always be...

{{productDetail[8308]}}

This fire-fighting pump is driven by a diesel engine and is end suction,...

{{productDetail[31220]}}

DESMI has an extensive product range of mobile and stationary diesel-driven pump units.

These pump units are made to comply with the demands of the marine industry as regards materials, design, and ease of handling.

All DESMIs mobile pumps are in compliance with the...

{{productDetail[21088]}}

Great to have in every garage, on the road, at the track, anywhere a small fire can start quickly, this Fire Suppression...

{{productDetail[113675]}}

The WRT, which is manufactured by Winkel, is a hose reel suitable to use in winding...

{{productDetail[7055]}}

The MMI is a split-case fire pump that is constructed in a horizontal split enclosure, integrated with a centrifugal pump body and 2 opposite impellers. The body is divided on the horizontal...

APPLICATIONS
Marine portable diesel engine pump for emergency services, fire fighting and drainage.

CHARACTERISTICS
Compact and lightweight construction for easy transportation, it can be pushed by one individual with front wheels, or two individuals in case of obstacles can lift it. Self-priming pump with high suction capacity,...

{{productDetail[104833]}}

The range of these fans includes 9 models suitable for estracting air and smoke from warehouses, etc. incase of fire according to the European rules EN 12101 – 3:2002 maximum temperature of the aspirated air: 60°C...

The range of these fans includes 9 models suitable for estracting air and smoke from warehouses etc. incase of fire according to french safety rules maximum temperature of the aspirated air 60°C (continuous work) or...

GENERAL USES

The range of these fans includes 10 models, suited to extract vitiated air from industrial factory units, ware hauses etc…

In all applications that require large airflow with low pressure, working range from -20 °C...

The range of these fans includes 9 models, suited to extract vitiated air from

industrial factory units, warehauses etc…

In all applications that require large airflow with low pressures,...

{{productDetail[25385]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation