Machine protection: Machine safety devices

291 companies | 1,459 products
hydraulic for tensile loads safety catcher
hydraulic for tensile loads safety catcher
KR/T, K/TA series

Safety Catchers are used where personal protection and accident prevention must be provided against failure of lifting members in an area where loads or tools are raised. Protection, for example, if a hydraulic or pneumatic pressure system ...

See the other products
SITEMA
hydraulic press safety catcher
hydraulic press safety catcher
KR, K series

Safety Catchers are used where personal protection and accident prevention must be provided against failure of lifting members in an area where loads or tools are raised. Protection, for example, if a hydraulic or pneumatic pressure system ...

See the other products
SITEMA
pneumatic for compressive load safety catcher
pneumatic for compressive load safety catcher
KRP series

Safety Catchers are used where personal protection and accident prevention must be provided against failure of lifting members in an area where loads or tools are raised. Protection, for example, if a hydraulic or pneumatic pressure system ...

See the other products
SITEMA
rubber bumper
rubber bumper
RBH series

Used for stops, guides, bumpers and protection. Molded bumper bonded to steel core for durability. Urethane offers highest resistance, strength and load bearing. High elongation hardness. Resistant to ozone and oxygen.

See the other products
Fairlane Products
elastomer bumper
elastomer bumper
RB series

Used for stops, guides, bumpers and protection. Molded bumper bonded to steel core for durability. Neoprene offers good resistance against weather, gasoline, oil, ozone and high temperature. Urethane offers highest resistance, strength ...

See the other products
Fairlane Products
steel bumper
steel bumper
RB-516 series

Used for stops, guides, bumpers and protection. Molded bumper bonded to steel core for durability. Neoprene offers good resistance against weather, gasoline, oil, ozone and high temperature. Urethane offers highest resistance, strength ...

See the other products
Fairlane Products
brass handle
brass handle
QLCA-04

These cam handles allow for quick fastening and unfastening without the use of tools. They allow the user to tighten by threading like a traditional fastener; however, for final tightening, the cam lever is pushed downward. To unfasten, ...

swing handle
swing handle
ATCL6X15-OG

Size: 15 mm - 40 mm

These adjustable torque handles allow the user to set a specified torque to prevent over-tightening by the operator. They are ideal for applications where a consistent force is required or where over-tightening can damage or distort a ...

security safety edge
security safety edge
SENTIR edge GF series

The new SENTIR edge GF series of our safety contact edges qualifies through its various benefits. Optimized material properties guarantee fast and improved switching results. Enhanced overtravel distances are also realized with the special ...

See the other products
ASO GmbH
solenoid interlock
solenoid interlock
SCL

- Solenoid controlled single-key or multi- key switch interlock - Suitable for use in high-risk, category 4 applications - 1 to 4 locks (keys), multi-key ref: 2E, 3E, 4E - 2NO+2NC contacts + 2 solenoid position control contacts (positive ...

See the other products
SECUMS Interlocks
handle with electrical switching function
handle with electrical switching function
P-KUBE Krome Series

Safety handles P-KUBE Krome General features Control devices: Without button

See the other products
Pizzato Elettrica
vertical roll-up cover
vertical roll-up cover

A SAFER WAY TO WORK Aluminum roll-up doors not only avoid dangerous situations, they also offer a more compact, safer, and durable solution than standard hinge doors. • Safer than hinge doors which can swing out into traffic • ...

roll-up cover
roll-up cover

Available in coated fabric, stainless steel, aluminum extrusions (with polyurethane or aluminum hinges), or coated polyester (with metal lamellas), open reel or protective canister design.

safety device
safety device
VZFH-HVZ

STORM BRAKE / RAIL CLAMP TYPE VZFH-HVZ, WITH LIFTING AND POSITIONING FUNCTION About the product Patented: Storm brake / rail clamp with integrated lifting and positioning function. With integrated lifting function No contact to ...

See the other products
Römer Fördertechnik GmbH / RFT
safety device
safety device
VZFH

STORM BRAKE / RAIL CLAMP TYPE VZFH, SPRING FORCE – HYDRAULICALLY About the product Storm brake / rail clamp to protect crane systems or railbound machines against unwanted movements e.g. storm. Closing by spring force with toggle ...

See the other products
Römer Fördertechnik GmbH / RFT
safety device
safety device
VZH

STORM BRAKE / RAIL CLAMP OPERATED HYDRAULICALLY TYPE VZH About the product Hydraulically operated storm brake / rail clamp to protect crane systems or railbound machines against unwanted movements e.g. storm. Hydraulic closing and ...

See the other products
Römer Fördertechnik GmbH / RFT
pull handle
pull handle

Handles / Ferrules Handles, also referred to as mounting handles or pull handles, are added to the outside of cabinets or other storage units to allow for easy access to the unit. Our handle styles include folding and non-folding and ...

wireless handle
wireless handle
FUFT50040B

• Greater security thanks to lock monitoring • Reliably transmits the status of the window ("open" or "closed") to the alarm panel • Simple installation by replacing the existing window handle The Secvest wireless window handle uses ...

pull-out handle
pull-out handle
WDS 8539 series

Size: 129 mm

Collapsible Tray Handle with Snap Lock - Grey (WDS 8539) (Available)£24.53 - £27.25 Each WDS 8539 Type - Recessed & Tray Handles MATERIAL Aluminium in grey. Snaplocks work in both open and closed positions. Suitable for 19" ...

floor mounting column
floor mounting column
11468

Specified instead of the SkyReach adaptor when a reduced overall height is required, eg when working under a low roof.

functional handle
functional handle

A full range of handles is available for most of the applications. This plastic handle has the possibility to mount a considerable quantity of switches in several different positions, so that the operator has all the necessary functions ...

pull handle
pull handle
3783.7002

Easy assembly – stable in use Our carrying- and rear up handle systems made of a material mix of plastic /aluminum are easily mounted due to their bushing mount and best suitable for carrying and supporting small appliances. The black ...

T handle
T handle
113899P1

The “T” handle makes mating and unmating the connector easier. Thenon-conductive red plastic material is strong and safe. (2) Self tappingscrews are used to secure the handle to the connector housing. Red “T” Handle Only. Also found in: ...

robot robotic compliance unit / collision sensor
robot robotic compliance unit / collision sensor
AGO-1

Features & Benefits *Dynamically Variable Trip Points - Use air regulator to adjust the breakaway moment. Being able to program your collision sensor offers protection at all speeds of operation. The breakaway threshold adjusts to ...

robotic compliance unit / collision sensor
robotic compliance unit / collision sensor
AGO-2

Features & Benefits *Dynamically Variable Trip Points - Use air regulator to adjust the breakaway moment. Being able to program your collision sensor offers protection at all speeds of operation. The breakaway threshold adjusts to ...

tubular handle
tubular handle
DL2

DL2 Blade guard cast miter saw Pedrazzoli mod. Brown. DL3 Control handle machine with button protected. Protec offers machine tool's standard protections for the national and the European market. Apart the use of these shelters by ...

flat interlock device
flat interlock device
010102080

Attributes straight, with lug Material stainless steel (V2A) Surface - Variants galvanized

flat interlock device
flat interlock device
000107100Z

Attributes straight, with lug Material steel Surface galvanized

rubber bumper
rubber bumper
1279

The borehole diameter needed for the universal clamping mechanism depends on the thickness of the sheet metal used. Please refere to the datasheet below. General measuring tolerances (DIN ISO 3302, section 2 M2F) All Measurements ...

air-operated robotic compliance unit / collision sensor
air-operated robotic compliance unit / collision sensor
QuickSTOPTM

The QuickSTOPTM is a dynamically variable collision sensor that operates on an air pressure system – and provides excellent protection in machine load/unload robotics applications. A regulated air supply provides positive, variable ...

air-operated robotic compliance unit / collision sensor
air-operated robotic compliance unit / collision sensor
QS-7

Dynamically variable collision sensor that operate on air pressure. Breakaway threshold adjusts to match the working force ranges of robot/application Non compressive, metal to metal seal for reliable and consistent operation ...

See the other products
PES S.A
air-operated robotic compliance unit / collision sensor
air-operated robotic compliance unit / collision sensor
QS-25

Uniquely designed to help protect your automation equipment - from laboratory to car construction, our collision sensors meet your productivity issues. With moments trip point from 0.3 to 30 Nm, small payload collision sensors will be ...

See the other products
PES S.A
air-operated robotic compliance unit / collision sensor
air-operated robotic compliance unit / collision sensor
QS-50

With moments trip point from 0.3 to 30 Nm, small payload collision sensors will be the most appropriate models for your applications such as pick and place or dispensing. Dynamically variable collision sensor that operate on air ...

See the other products
PES S.A
security interlock device
security interlock device
8.02.51.19

Used to lock doors, hatches, drawers or used as a safety stop on production tools. Fail-safe or fail-secure locking. An internal spring return also ensures the bolt returns. Locking mode Fail-secure Stroke (in mm) 8 Maximum ...

handle with push button
handle with push button
P7 series

P7 - CompactPCI Inject/Eject Handles Industry-standard fit is complemented by ergonomically friendly design enhancements that provide an ample grip, easily accessible release button, and low operating force for easier use. The paired ...

See the other products
Southco Asia Ltd
safety guard
safety guard

Belt Guards are precisely measured high quality products, which can be easily adjusted for industry requirements. Pre-dimensioned and designed, they are also inexpensive to acquire. The Belt Guards include a rotating adjustment plate, ...

access control door unit
access control door unit
MCA Net

Versatile equipment for access control in industries, schools, hospitals, condominiums and other environments. It uses technologies such as biometric fingerprint reader, touch pad, Mifare cards, RFID and barcode. • Easily installed ...

exhibit your products

& reach your clients in one place, all year round

Exhibit with us