Advanced 10GbE Networking for Your Sun Blade and Rack Servers
Oracle's Sun Dual Port 10GbE PCIe 2.0 Networking Cards with the Intel 82599 10GbE Controller with pluggable transceivers are designed for today's changing datacenter environments ...
With parallel processing and chip multithreading (CMT) technologies becoming more pervasive, high performance applications are now more dependent on I/O throughput and memory latency for performance gains. Oracle's Sun multithreaded 10GbE networking cards help accelerate application performance by optimizing I/O throughput within environments ...
Oracle's Sun Multithreaded Quad Gigabit Ethernet Networking Cards host four high-performance Gigabit interfaces in a single PCIe slot to provide high bandwidth server-to-server and server-to-switch connections while conserving valuable PCIe slots and providing a lower cost per port. It extends CPU and OS parallelism to networking with its support for Oracle VM Server ...
Transfer images at full gigabit Ethernet bandwidth ...
The Brocade FCOE10-24 Blade provides wire-speed, cut-though, and non-blocking Data Center Bridging (DCB)/Fibre Channel over Ethernet (FCoE) performance to Brocade DCX and DCX-4S Backbones. ...
The Brocade FC4-16IP enables organizations to integrate lower-cost Ethernet-connected servers into Brocade Fibre Channel storage networks by using the iSCSI protocol. Low-cost Ethernet attachment avoids the cost of additional Host Bus Adapters ...
The Brocade FX8-24 Extension Blade, designed specifically for the Brocade DCX 8510 and Brocade DCX, helps provide the fastest, most reliable, and most cost-effective network infrastructure for remote data replication, backup, and migration. Leveraging next-generation 8 Gbps Fibre Channel, 10 Gigabit Ethernet (GbE), and advanced Fibre Channel over IP ...
Westermo's short haul modem MA-19 is used for data communication over long distances and in harsh environments. The MA-19 is used to connect equipment with RS-232/V.24 interfaces. Westermo's ±10 mA balanced current loop (W1) transmission technique ...
The TR-36 is a rack based modem designed to meet industry demand for reliability and functionality in environments with high levels of electrical interference. The RV- 07 (19" rack) can be fitted with up to 17 TR-36 modems, which makes it ideal for use where numerous modems need to be installed in a central location (modem pool). The TR-36 is a V.34 modem meaning that it can support bidirectional ...
CP342 is a Dual Gigagbit Ethernet controller board, based around Intel 82546GB chip, designed for operation in CompactPCI systems offering versatile connectivity to your application ...
DeviceNet Network Interface Cards
Data acquisition for real-time control applications
Brad® Network Interface Cards connect various ...
Features
PICMG® 2.0 R3.0 compliant
Supports 32bit/33MHz, 66bit/64MHz CompactPCI® ...
The IXXAT PC/CAN interfaces enable PC applications to access CAN networks with a singular variety of different PC interface standards. The customer can select an optimum PC/CAN interface according to the application, performance ...
Matrox Concord is a family of Gigabit Ethernet network interface cards (NICs) and IEEE 1394b adaptors that are pre-licensed for use with the Matrox Imaging Library (MIL) drivers for the GigE Vision® and ...
Overview
Moxa's new CP-602U-I CAN (Controller Area Network) interface board supports the Universal PCI interface. As a stand-alone CAN controller, the CP-602U-I is a cost-effective solution that provides two active CAN controllers ...
Part Number 99430-5
The RocketModem IV uPCI 4-Port product is a PCI multi-modem card designed to be compliant with the PCI 2.1 specification and supports installation in 3.3V supported bus architectures. Four RJ11 modem port connections are provided on the edge of the card. Modems support V.92 and communication speeds from 300 bps to 56 Kbps, plus 14.4 Kbps fax.
Highlights
...
Part Number 99431-2
The RocketModem IV uPCI 8-Port product is a PCI multi-modem card designed to be compliant with the PCI 2.1 specification and supports installation in 3.3V supported bus architectures. Eight RJ11 modem port connections are provided on the edge of the card. Modems support V.92 and communication speeds from 300 bps to 56 Kbps, plus 14.4 Kbps fax.
Highlights
...
The PCX20 Series of Network Interface Modules (NIMs) offers dependable ARCNET connectivity for XT/AT compatible computers.
This product is designed with the COM20020 ARCNET controller chip. Features include command chaining, sequential access to internal RAM, duplicate node ID detection, and variable data rates up to 5 Mbps. There is no requirement for wait-state ...
Just like the PC10420 Series of Network Interface Modules (NIMs), the PC10422 Series enables ARCNET connectivity for PC/104 compatible computers. However, this series is designed with the more advanced ARCNET controller chip which is the COM20022.
The COM20022 controller chip has benefits such as command chaining, sequential access to internal RAM, and duplicate ...
Server-grade network adapter
Intel® 82599ES 10000M network chip
2 ...
Server-grade PCIe network adapter
2 x SFP + 2 ...
Qualcomm’s MDDI standard provides a proven solution for the interconnect challenge between the upper and lower clamshell in a flip phone. The MDDI high-speed solution supports ...
PC-USB and Polymath Machine Edition: the complete solution for PC supervision
ESA completes the offer of supervision using XP based (Windows XP Embedded and Windows XP Professional) devices with PC-USB interface cards, which allow the use of Polymath Machine Edition on any PC, with the possibility of using all Polymath drivers
The PC-USB cards are not merely adaptors, they are ...
TIC 020 is a TAP Interface Card (TIC) for the SCANFLEX boundary-scan hardware platform. The module features a programmable multi-bus ...
The technology of the Nic (Cards) is based on the RTL8139C/D ...
FEATURES
3 serial ports
Self Resetting Fuse
Bi-Directional Data Transfer
Ethernet connectivity to the network
Each CNC a node on the network
Converts Ethernet to Serial RS232
Supports maximum baud-rate transfers
Supports RS232 Barcode ...
■ Based on Intel 82576EB;
■ 4 electronial Gigabit Enthernet interfaces ...
MiniCore%u2122 RCM5600W
Mini-Microprocessor Wi-Fi Core Module
Large View
Models: RCM5600W
* RCM5600W Series Description
* RCM5600W Series Specifications
* RCM5600W Product Documentation
* MiniCore RCM5600W Data Sheet
Description
The MiniCore RCM5600W series is Rabbit's most compact ...
Synopsys offers designers a broad portfolio of complete, silicon-proven IP solutions for the ...
DDC designs and manufactures innovative board- and component-level products for the commercial, military and aerospace marketplace. These products are used for onboard or laboratory applications ...
