|
|
Everyone talks about the future, but Rittal helps shape it and that includes the field of climate control.
Development work focuses on the holistic protection of process control with the minimum possible energy consumption.
Modern cooling units with excellent efficiency and perfect interface technology, together with liquid cooling concepts, offer fresh new perspectives for the correct cooling of electronic components. This is crucial to the availability and reliability of machinery and IT technology.
For this reason, Rittal collaborates closely with you to develop customised climate control concepts.
|
|
| Montel can also provide cabinets that recreate the microclimate needed for storing fragile items and valuable collections (ventilation slots, trays and windows on the doors). |
|
| Investing in the best industrial PC makes no sense if the enclosure is not suitable for use in harsh industrial environments. The racks and enclosures shown on the following pages are optimized for the special conditions of industrial use and ensure the highest degree of safety against external interferences. Our twenty years of experience in developing and producing industrial electronics ensures that you will find the optimum solution for your application. |
|
| Assembled enclosures with backplanes, power supplies, and various configuration options. Modified standard and custom solutions also available. |
|
VME bus
- Available from stock
- Combination from VMEbus and 19 technique
- System with plug and play technique
CompactPCI
- Available from stock
- Combination from CompactPCI bus and 19 technique
- System with Plug and Play technique
VME64xbus
- Available from stock
- Combination from VMEbus and 19 technique
- System with Plug and Play technique
|
|
- Door with safety lock and polycarbonate glass. Useful dimensions 660x525 mm h.
- Suitable for monitor sizes up to 21". Internal dimensions of upper compartment: 690x600x580 mm h.
- Retractable keyboard shelf Useful dimensions 620x510 mm h.
- The lower compartment can be fitted with retractable and height-adjustable shelves for housing hardware systems and printers. Internal
dimensions 690x600x720 mm h.
- Cooling fan with dust filter.
- 4 channel cable duct.
- 5 socket electrical system with circuit breaker.
- Air inlet hole with dust filter.
- Intlet hole for network cables and outlet hole for power cable.
- Room temperature for use -5/+40 C with humidity up to 50%
- Room temperature for use -5/+20 C with humidity up to 90% |
|
- A 4" base with front access makes it easy to move with a forklift or pallet-jack when required. It is also possible to add casters and have the cabinet be mobile at all times.
- The 21 " x 19" glass panel is demagnetized to avoid image distortion.
- The palm rest on the keyboard drawer provides good wrist support when consulting computerized data.
- The back panel provides easy installation of your computer system
- Built-in ventilator with filter to limit dust infiltration and reduce heat, allowing you to protect your equipment. |
|
| For the best protection of PC Blades and BackPacks, ClearCube recommends using a full cabinet enclosure. Cabinets come standard with a glass door that provides protection and Blade front panel LCD visibility. Each cabinet also includes adequate space for routing User Port and Ethernet cables. |
|
CARDMASTER range is ideal for packaging instrumentation, measurement, monitoring and process control equipment. It provides two compartments - one for circuit boards and sensors with slots for printed circuit board insertion, and another one for terminal and wiring. All sizes are available in both polycarbonate and ABS.
Dimensions range from 166*160*80 mm to 390*316*167 mm.
PC: IP 65; IK 07/08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V; UL 508
ABS: IP 65; IK 07; NEMA Type 1, 4, 4X, 12 and 13; UL 94-HB
|
|
Front panel unshielded
Al natural, anodised
Al natural, pre-anodised, cut edges clean
AI, front anodised, rear yellow chromated
Partial width front panel, Al, 2,5 mm
Front panel shielded
Shielding through EMC profile seal (please order separately)
Front panel, 2.5 mm aluminium, front anodised, rear yellowchromated, 2 alignment pins (up to 28 HP) pressed in, stainlesssteel
Front panel shielded, U profile
High stability (U profile)
Shielding through EMC profile seal (please order separately)
Front panel, Al, front anodised, rear yellowchromated, 2 alignment pins (up to 28 HP) pressed in, stainlesssteel
Partial front panel, bottom-hinged
For subracks and case, can be unhinged at 135 (subracks,ratiopacPRO, propac case)
Usable height is not reduced
For mounting on horizontal rails
Unshielded
Shielded, U front panel with EMC textile seal |
|
Geotest's offers a large selection of PC, 3U and 6U PXI instrumentation chassis allowing test engineers to design system configurations specifically for automatic test equipment (ATE) systems, data acquisition, process control applications, and other industrial applications that require PC-based and PXI-based instrumentation.
|
|
Due to the hardness of the material, we recommend using metal multi-tooth screw
SZ 2486.300 for the interior installation.
Rittal Service:
TS stainless steel (1.4301) available in protection category NEMA 4x on request please add extension .640 to the Model No.
Material / Surface finish
Material:
Stainless steel 1.4301:
Enclosure frame, roof, rear panel and gland plates: 1.5 mm
Door(s): 2.0 mm
Mounting plate: 3.0 mm sheet steel
Surface finish:
Enclosure frame and gland plates: Bare
Door, roof and rear panel: Brushed on the outside,
grain size 240
Mounting plate: Zinc-plated
Supply includes
Enclosure frame with door(s), mounting plate, gland plates, rear panel and roof, 2 support strips fitted in the enclosure depth (only with depth 600 mm).
Protection category
IP 55 to EN 60 529/10.91, NEMA 12 is met.
|
|
| Two frames with different stability but identical outer appearance. Two colour combinations for immediate selection on ServicePLUS. Large variety of versions and dimensions (up to 1200 mm depth). Unique profile with many assembly possibilities and new ways for cable management. |
|
- Vertical masts, internal uprights and anchoring cross-beams in metal sheet steel, 2mm. thickness, upper and lower base 1,5mm. thickness, painted in RAL 7035 (smooth finishing)
- Tempered glass door according to UNI 7142 -(88) norm
- Rapidly removable side panels in pre-painted RAL 7035 sheet steel and protected by a key lock
- Ventilation flutes on both upper and lower areas
- Roof equipped to accept forced-air ventilation unit
- Possibility to install a second pair of 19" frames in the rear position
- Roof and base equipped with cable entry holes with sliding covers
- Ready for ground wiring
- IEC borings on 19" frame
- IP 20 protection degree according to EN 60529 norm |
|
The Rosenberger-OSI Data-Center-Rack has been developed especially for FO patch distributors in data centers. In data centers the requirement for highest density becomes increasingly more important than in other cabling areas. To lead the through the very high density emerging large cable volumes professional and appropriate away from the patch fields, new cable management solutions are needed.
Advantages:
- installation of single data racks
- module system
- variable side wall and rear wall doors concept
- cable management system
- accessories
|
|
| Logstrup can supply customised 19" rack solutions to suit all requirements. Heights, depths and widths are infinitely variable due to the three dimensional design of the Logstrup system. Racks can be designed in an open framework system to give total freedom of access or fitted with doors and plates to provide safety, security and a pleasing aesthetic finish. |
|
Standard PCs are increasingly used as control systems for machines, complex plants and installations. Protecting the main PC unit and the peripherals, e.g. printer and keyboard, from illegitimate access and from sources of pollution is the purpose of the PC Enclosure range. These systems conform to common safety requirements and provide the standard of easy and comfortable operation that has come to be expected. They also feature a range of concepts for heat dissipation.
- powder coated RAL 7032, front doors painted 7023
- robust industrial design
- complete pre-installation (ready for use upon delivery)
- front with three compartments, full-size door on back
- roof plate screwed tight (optionally raised, meeting IP 23)
- two-part bottom gland plate, 1/3 and 2/3, with patented rubber profiles for cable entry
- two mounted device carrier plates included in standard supply
- one pair of side panels also pre-installed
- multiple cable entry options
- appealing design |
|
"PRATIK PC" is a special configuration particulary engineered to accomodate industrial Personal Computer.
- The upper tempered glass door with handle allows the operator to look at the monitor.
- The lowest part, equipped with 19" rack mount frames or full-width separator shelves, is suitable to contain PC, UPS and/or printers. For safety sake this part is closed by a blind metal door with handle.
- The middle part contains a sliding shelf for housing the keyboard. This section has its own opening, in order that the operator can have access to the keyboard only.
Like all PRATIK cabinets, it has a rear metal door with lock and keys and metal side walls.
It is available in 1.795 (37U) and 2.018 (42U) heights.
Dimensions (width x depth): 640x640 or 640x800 |
|
| The DS-M1 uses an ultra light, specially-made metal outer covering, while the DS-M2 features a highly rigid double-decked structural design. The inner layer of both cases utilizes the DS-M1s ultra light outer covering, while the outer layer of each case is finished in a magnificent polished ebony coating with the added protection of reinforced fire retardant plastics. Apart from their sleek elegance and precision, the new cases also effectively dampen noise from radiating fans inside during operation. The layout of ports at the back of the frame has further been designed for user-friendliness, allowing even elementary DIY users to easily identify and plug in ports. |
|
| We offer an extensive range of products for industrial PCs to the ATX standard, from 482.6 mm (19") rack-mount versions in 1, 2 and 4 U, through to solutions for direct mounting on mounting plates. |
|
| A 3U-high chassis which houses up to eight PC Blades. Each Cage is a self-contained unit that provides all of the Ethernet connections, airflow management, and power required by the Blades. Up to 14 Cages (112 Blades) can be mounted in a standard 6' rack. A BackPack connects directly to the back of each Cage, and PC Blades slide in the front. |
|
IPC-810A
19" rackmount, EIA RS-310C compliant
14-slot ISA/PCI/PICMG passive backplane
Provide 3 x 3.5" HDD bays and 2 x 5.25" HDD bays
The front panel contains power switch, CPU reset button, keyboard lock, power LED and HDD LED
Dust-proof and lockable door protects control parts.
With keyboard interfaces on the front and rear of the plane both
Anti-vibration bar for preventing the inserted card from vibrating
Support PS/2 power supply
Support ATX motherboard
Dimensions: 177(H) x 482(W) x 452(D) mm |
|
A frontal frame is mounted on the standard ARETA cabinet to form the
basis of this PC cabinet assembly. |
|
PC 4650.000 with keyboard drawer
- Lock insert, lock no. 3524 E
- Swing-down front for handrest
- Mousepad support (also suitable for IP 67 mouse), may optionally be used on the left or right
- Hinged cable support
PC 4650.704 with desk section
- Cover plate top and bottom
- Designer strip made from plastic approved for use with foodstuffs
Material:
Stainless steel 1.4301
Enclosure: 10-fold profiled, 1.8 mm
Rear door: 2.0 mm
Gland plates: 1.5 mm
Monitor field with single-pane safety glass for screen diagonal 482.6 mm (19).
Surface finish:
Brushed, grain 240
Protection category
IP 55 to EN 60 529, NEMA 12 is met. |
|
The WMC-1004 is a full-length shoe-box wallmount industrial chassis for both SBC's (8-10 slot backplanes) and micro ATX motherboard. Its two-story modular design allows convenient installation of CPU boards and drivers while keeping the size of the chassis compact. Within its heavy-duty steel construction, it is equipped with two 5.25", one external 3.5" and one internal 3.5" drive bays for basic system requirements. To further enhance the unique design of the WMC-1004, (2) 9cm ball-bearing fans have been allocated especially for the CPU board to maintain the integrity of the higher speed processors. The WMC-1004 offers an ideal solution for computers in public areas or mobile computers where size is one of the main concerns.
Features:
Heavy duty steel construction shoebox industrial chassis can be mounted vertically or horizontally.
Two 5.25" and two 3.5" drive bays (one hidden).
Two 9 cm ball bearing fans with replaceable air-filter and one 8cm ball bearing fan.
Supports 8-10 slot backplane or micro-ATX
motherboard.
Supports PS/2 power supply |
|
|
|
Computer boxes, Chassis
