|
|
Monitor enclosures
Example/ applications
* Enclosures for touch panels
* Enclosures for light panels
* Enclosures for plasma screens
|
|
- Vertical masts, internal uprights and anchoring cross-beams in metal sheet steel, 2mm. thickness, upper and lower base 1,5mm. thickness, painted in RAL 7035 (smooth finishing)
- Tempered glass door according to UNI 7142 -(88) norm
- Rapidly removable side panels in pre-painted RAL 7035 sheet steel and protected by a key lock
- Ventilation flutes on both upper and lower areas
- Roof equipped to accept forced-air ventilation unit
- Possibility to install a second pair of 19" frames in the rear position
- Roof and base equipped with cable entry holes with sliding covers
- Ready for ground wiring
- IEC borings on 19" frame
- IP 20 protection degree according to EN 60529 norm
|
|
The Rosenberger-OSI Data-Center-Rack has been developed especially for FO patch distributors in data centers. In data centers the requirement for highest density becomes increasingly more important than in other cabling areas. To lead the through the very high density emerging large cable volumes professional and appropriate away from the patch fields, new cable management solutions are needed.
Advantages:
- installation of single data racks
- module system
- variable side wall and rear wall doors concept
- cable management system
- accessories
|
|
Features:
- 24" width aligns with floor tiles
- Vertical cable management options for mid to high density cabling applications are simple to install and allow user to configure system to their needs
- Rack is UL listed for 1500 lbs. load rating to accommodate large networking equipment
- 6" deep vertical channel design provides distribution cable pathway
- System accessories provide maximum flexibility that allows the user to customize the rack layout
- Rack features 19" or 23" EIA mounting
- Rack space identification allows quick and easy location of rack mount items
- Full length dual and single hinged doors provide an aesthetic finish and easy access to the vertical pathway
- Top channel provides pathway for cable or ladder rack up to 18" wide
|
|
SP20 Rack
- High-grade steel cabinet (light grey RAL 7035). Profi le technology guarantees maximum stability
- Fully assembled with basic accessories
- Flexible interior - designed to accommodate all currently available IT components
- Simple to assemble and disassemble - all cabinets can be dismantled
- Accessible from all sides (removable doors and panels)
- Can be used as stationary or mobile units
- 100% modular system, can be extended at any time
- Extremely strong frame with load bearing capacity of up to 1000 kg
|
|
|
|
|
|
APPLICATION
The 2-Post Open Frame Rack is a key element in a structured cabling system. With models sized to fit either 19 in. or 23 in. equipment, this floor mounted unit is particularly well suited for networking and data transmission applications.
FEATURES
Range of heights from 4 ft. to 9 ft. (24U to 58U) to match capacity requirements; 19 in. Rack Packages are 7 ft. high
Side rails are tapped on both sides with 12-24UNC threads for quick installation
EIA Universal 5/8 in. - 5/8 in. - 1/2 in. vertical mounting hole pattern matches industry standards
RU markings on both front and back of uprights make it easier to mount equipment
Packed unassembled in individual cartons; assembly hardware (including twenty 12-24 mounting screws) is furnished for convenient storage and installation
Can be shipped via FedEx or UPS
Convenient rack and cable manager packages offered with either one or two 6 in. cable managers
Each cable manager in the package includes a two-piece
snap-on cover
Packages are available in black or mill finish
CONSTRUCTION
Frame is a strong and lightweight aluminum (6063-T6 alloy) extrusion with RU markings on both front and back of uprights
FINISH
RAL 9005 black polyester powder paint or milled aluminum
INDUSTRY STANDARDS
UL 1863 listed, File No. E230874
cUL CSA22.2 No. 182.4, File No. E230874
EIA 310-D
|
|
A frontal frame is mounted on the standard ARETA cabinet to form the
basis of this PC cabinet assembly.
|
|
Standard PCs are increasingly used as control systems for machines, complex plants and installations. Protecting the main PC unit and the peripherals, e.g. printer and keyboard, from illegitimate access and from sources of pollution is the purpose of the PC Enclosure range. These systems conform to common safety requirements and provide the standard of easy and comfortable operation that has come to be expected. They also feature a range of concepts for heat dissipation.
- powder coated RAL 7032, front doors painted 7023
- robust industrial design
- complete pre-installation (ready for use upon delivery)
- front with three compartments, full-size door on back
- roof plate screwed tight (optionally raised, meeting IP 23)
- two-part bottom gland plate, 1/3 and 2/3, with patented rubber profiles for cable entry
- two mounted device carrier plates included in standard supply
- one pair of side panels also pre-installed
- multiple cable entry options
- appealing design
|
|
"PRATIK PC" is a special configuration particulary engineered to accomodate industrial Personal Computer.
- The upper tempered glass door with handle allows the operator to look at the monitor.
- The lowest part, equipped with 19" rack mount frames or full-width separator shelves, is suitable to contain PC, UPS and/or printers. For safety sake this part is closed by a blind metal door with handle.
- The middle part contains a sliding shelf for housing the keyboard. This section has its own opening, in order that the operator can have access to the keyboard only.
Like all PRATIK cabinets, it has a rear metal door with lock and keys and metal side walls.
It is available in 1.795 (37U) and 2.018 (42U) heights.
Dimensions (width x depth): 640x640 or 640x800
|
|
PC 4650.000 with keyboard drawer
- Lock insert, lock no. 3524 E
- Swing-down front for handrest
- Mousepad support (also suitable for IP 67 mouse), may optionally be used on the left or right
- Hinged cable support
PC 4650.704 with desk section
- Cover plate top and bottom
- Designer strip made from plastic approved for use with foodstuffs
Material:
Stainless steel 1.4301
Enclosure: 10-fold profiled, 1.8 mm
Rear door: 2.0 mm
Gland plates: 1.5 mm
Monitor field with single-pane safety glass for screen diagonal 482.6 mm (19).
Surface finish:
Brushed, grain 240
Protection category
IP 55 to EN 60 529, NEMA 12 is met.
|
|
one cabling solution for your equipment
- Ten sizes of cable ducting plus associated accessories.
- Optimal ducting sizes for maximum cabling capacity.
- Simplified installation:
- snap-off tongues for cable entry,
- 4 types of fixing accessories to suit the application: screw, clip-in, door mounting and chassis mounting.
- Important: no metal component parts enter the inside of the trunking, thus maintaining electrical insulation.
|
|
|
|
|
|
PERMANENT PROTECTION for workstations with a 14"
to 17" screen, data capture tray and keyboard.
DESCRIPTION:
- Sides in 10mm-thick composite material, self-coloured (white), complying
with hygiene standards in force
- Thermoformed monobox structure (rounded edges)
- Smooth surface for easy cleaning and to prevent accumulation of dirt
- Model also available for LCD screen: AGRO EC LCD
- Self-supporting structure for optional wall mounting
- Sloping top
- Sealed to IP 65
- Fire rating M1 self-extinguishing
FEATURES:
SCREEN COMPARTMENT
- Front protected by opening panel in 6mm-thick transparent, colourless
acrylic glass
- Sealed with compression bolts and peripheral joints in the housing,
in stained wood
- Closure with two compression bolts
KEYBOARD COMPARTMENT
- Independent of the screen compartment
- Compartment with white foldaway polyethylene tray with two runners
in the same material, and safety stops
- Thermoplastic hatch (10mm thick) sealing the compartment
- Cable sleeve for link between the two compartments
|
|
INNOVATIVE PRODUCTS
- Monobox structure
- Sections made from 19mm composite extruded material, self-coloured
(white) and complying with hygiene standards
- Smooth surface for easy cleaning
- No sharp corners to prevent accumulation of dirt
- M1 self-extinguishing fire classified
- High mechanical strength eliminating any risk of condensation
or bacterial development
- High modulus of elasticity guaranteeing high resistance to pressure
and knocks
- High resistance to abrasion
- Sealing to IP 65
Access from the front:
- Opening/closing with sliding curtain made from articulated thermoplastic
sections (food quality) guided by 2 PVC runners with seals
- 2 handles for easy manoeuvring
- Closed curtain, sealed compartments with directional water jet or foam
cannon projections
Access from the rear:
- Removable panel, sliding vertically, giving access to the rear of the IT
equipment (cables, maintenance)
- 2 height adjustable trays (on vertical runners)
|
|
|
The range PAC is intended for difficult environments. This range can accept up to 8 cards (short or long) ISA, PCI, or PCIe. Products of this range have a systeme of blockage for every card and a filter with removable air for easy maintenance.Thanks to conectors, this PC could be defined according to your needs.
|
|
PCI enclosures
Internal and end enclosures with knock outs
Plastic enclosure system withIngress protection IP 66
Version with coloured cover
Classified product range with 13 enclosure variants from 65 x 65 x 57 mm to 254 x 355 x 111 mm
Easy to modify
Extensive range of accessories from installation plates to insulating stoppers
|
|
Laser printer protection in hostile environment
(dust, freeze, deep freeze, washing...)
Made of composite material (thickness 10mm)
Thermoforming processed structure (rays sweetened)
Smooth aspect for easy cleaning and avoiding the accumulation of waste.
Plexiglas lid with actuator
Filtered air ventilation with extraction calories system
Front access for paper
|
|
ROTECTION OF LARGE FORMAT THERMAL
PRINTERS used in the processing industry.
DESCRIPTION:
Sides made from 19mm-thick composite material, self-coloured (white),
complying with hygiene standards in force
Heat-formed monobox structure (rounded edges)
Smooth surface for easy cleaning and to prevent the accumulation
of dirt
Fire rating M1 self-extinguishing
FEATURES:
ACCESS TO THE PRINTER:
Complete side access
1 lid with handle, opening vertically
1 hatch
Sealed housing
KDL cable outlet device
FRONT
Shutter in transparent, colourless acrylic glass (PMMA) or in composite,
opening vertically and mounted on positioning clips
This shutter allows access to printer controls and labels to be collected
A light for direct release of labels can be fitted to order
DEEP FREEZE EQUIPMENT (TO -30C)
Continuous heating within the hatch, by means of a convection
ventilation system with thermostat (maximum power 350 W)
For an exterior temperature of -27C (front shutter closed), the
temperature inside
|
|
PROTECTION & SECURITY: maintaining the best protection against dust, bumps, water, washing...
MODULARITY: large compatibility to fit every printer
Description:
Molded into one piece
Sliding tray: Printer placed on a tray, removable by means of the front shutter. Tray mounted on stainless steel runners
Smooth surface.
Acrylic sliding front panel with opening for printings and easy access to printer
Cable grommets through panel
Easy access to printer and labels
Easy access to front and back panels (2 doors)
|
|
|
RapidNet is a patented, high performance, pre-terminated system that utilizes a proprietary bundled cable cut to customer specified lengths. Combined with our patented cassettes, which protect the terminations, installation is a snap - literally. The cassettes snap easily into the RapidNet modular panel which fits into a standard 19" rack. RapidNet, manufactured in a stringent, quality controlled environment, arrives pre-labeled and pre-tested which contributes to higher quality and lower installation times. Because it can be installed so quickly and carries a high degree of performance and reliability, RapidNet is the ideal solution for mission critical data centers, temporary networks, and disaster recovery planning.
|
|
|
HellermannTyton’s rack mount fiber enclosures are the ideal direct termination and splice solution of LAN applications capable of supporting up to 192 fibers. While offering easy-to-use front slide-out trays for easy access to connections, enclosures are equipped with cable management and cable routing accessories to limit bend radius and add strain relief control. HellermannTyton’s Rack Mount Fiber Enclosures easily fit into 19” or 23” racks.
|
|
- 4U 19'' Rackmount Industrial Chassis for IPC or Mainboard :
- Rugged design constructed in 1.2mm Heavy duty steel and
it's a cost effective solution
- One 12cm lntake cooling for excellent cooling cycle and
comes with washable air filter
- Design for various industrial computer for networking,
communication applications and related solutions
|
|
. Management of the cables
. Modularity and Flexibility
. Capacity of resistance to the load up to 1.350 kg
. Invisible circulation of the cables
. 10 years guarantee
|
|
With a depth of 1000 mm, these cabinets are suitable also for housing very large servers.
The side panels come with ventilation flutes.
Available for both width 640 and 800 mm.
It is advisable to make use of a front and/or rear door with holes, to ensure adequate heat dispersion.
NEW!
Its now available the special dimention 600 x 850 - 42 units, specially made for servers and to be positionned on floating floors!
WE ARE LOOKING FOR DISTRIBUTORS AND AGENT IN FREE AREAS, IF YOU ARE INTERESTED CONTACT US
|
|
Absolutely new , workable for small and medium offices where you cannot place a standard Server Rack 19" Cabinet due to space.
Dim. 600Lx1000Px650 12 Units
Code : MAGN1062 Colour Black Ral 9005
With this new solution you can solve all space problems in office , can contain also Servers with 800 depth.
This cabinet can be placed or under desk or in a corner of the office without be in the way , with a very nice styling .
Contact us for more information
We are also looking for Distributors and Agent for free areas, if you are interested contact us
|
|
SP54 Rack
- High-grade steel cabinet (light grey RAL 7035, black RAL 9005). Profi le technology guarantees maximum stability
- Fully assembled with basic accessories
- Flexible interior − designed to accommodate all currently available IT components
- Simple to assemble and disassemble − all cabinets can be dismantled
- Accessible from all sides (removable doors and panels)
- Can be used as stationary or mobile units
- 100% modular system, can be extended at any time
- Extremely strong frame with load bearing capacity of up to 1000 kg
- Protection rating: IP54, all-round sealing
|
|
- The most up-to-date cabinet solutions for all standard server and network components even for combinations of components from
different manufacturers
- Maximum assembly range: 900 mm deep, 600 mm wide
- Maximum security: side panels attachable/detachable with lock,
doors with pivoted handle and lock
- Optimum ventilation (active or passive)
- Simple to assemble and disassemble − all cabinets can be dismantled
- Mobile or stationary application possible
- In light grey RAL 7035 or black RAL 9005, inc. accessories in black
- Extremely strong frame with load bearing capacity of up to 1000 kg
|
|
|
|
|
|
Application
Designed deeper to house servers and manage power cables, PROLINE FLOTEK Cabinets rely on optimized passive airflow for thermal management. The cabinets may be placed in data rooms randomly or in hot/cold aisle configurations.
Features
Rigid front door made of aluminum extrusions and formed perforated steel offers highly attractive appearance and durability
Fully perforated front and rear doors and fully perforated top allow maximum air movement around equipment; conforms to server manufacturer open space requirements
Models without sides fit together quickly for easy installation in ganged applications
Three-point locking pushbutton swing handle on front door provides easy but controlled access; two keys included
Rear doors are split for easy access and include 3-point, low-profile, locking swing handle
Two sets of 19-in. square-hole rack angles support both front and rear of equipment
Rack angles are infinitely adjustable from front to rear for positioning flexibility
Large gland plate in top allows easy routing of cable, pre-terminated cables and patch panels
Mounting hardware (20 each of 10-32 screws and cage nuts) is included
Specifications
16 or 14 gauge steel doors, sides and cover
Welded 12 gauge steel frame
Rack angles have square holes with EIA 310-D spacing
Open bottom with integral bolt-down brackets
Finish
Phosphatized steel coated with RAL 9005 black textured, low-gloss polyester powder paint. Other finishes availablecontact Hoffman Customer Service.
Patents
|
|
Project and Effi ciency Range with low-cost
Complete Cabinets for networks
- Models for maximum market coverage with
43 U in heights of 2000, depths of 800 and
widths of 800 mm
- Extremely strong framework with a load
bearing capacity of up to 700 kg
- Frame can be "halved"
- High quality powder coating fi nish in light
grey RAL 7035 on all panelling components
- All panelling, such as side panels and doors,
can be removed in seconds
- Top and bottom modules prepared for brush
strips and/or ventilators
- Doors fi tted with T-handles and locks. Can be
exchanged for pivoted handles
- Plinths are always passively ventilated,
100 mm high
- Standard depth-adjustable 19" mounting
angles
- Extremely high savings on each baying solution
Material:
- Framework, vertical: 1mm steel sheet, multiply
profi led;
- Horizontal: 2 mm rectangular tube.
- Panelling: 1 mm steel sheet
|
|
Stainless steel cabinets are used in both corrosive and food processing environments. ARETA has been manufactured in stainless steel without changing its design structure or its accessories, thus providing all the benefits offered by the standard painted version.
The clean external finish gives the product an aesthetically very pleasant and highly professional appearance.
|
|
|
|
Computer boxes, Chassis
