|
|
europacPRO
- 19’’ subrack
- With high flexibility
- EMC shielding can be retrofitted
- Fully IEEE 1101.1 compatible
europac integral
- Subrack with integrated functions
- Simple assembly
- Cost effective alternative for high quantities
multipacPRO
- 19" chassis for horizontal board installation and non-standardized components
- Versions in aluminium or sheet steel
inpac
- 19" chassis with high mechanical stability
- Modular design for standardised board formats
- Front and rear frame Al die cast frame Al die cast
|
|
Features:
* Tool-free assembly, accessibility and maintenance.
* Full access from all sides.
* Security. One lock secures all access.
* Internal and external installation helps.
* Design which combines aluminium, steel and thermo-plastics. |
|
Eldon's Upgraded Floor Standing ElRack Patch and Server Rack Series
ElRack just got better! Not only is the "one-rack-solution" to providing a variety of different mounting possibilities a real winner with the industry, but now with the newly released accessories available, ElRack truly becomes a real trend setter! Whether you need 19", 23", 24" or ETSI (metric) requirements, the ElRack%uFFFD copes with all sizes, as standard.
Dimensions available:
H: height from 21U (1000mm) to 48U (2200mm),
W: width 600mm, 800mm and 900mm,
D: depth 600mm, 800mm, 900mm, 1000mm and 1200mm.
The Elbox wall mounting range
Boasting a fresh, appealing design, the new ElBox patch box comes in 400mm, 500mm and 600 mm deep versions. While both the 400mm and the 500mm will be supplied as knock-down or flat-pack versions, the 600 mm deep model will be delivered pre-mounted at the factory. |
|
Due to the hardness of the material, we recommend using metal multi-tooth screw
SZ 2486.300 for the interior installation.
Rittal Service:
TS stainless steel (1.4301) available in protection category NEMA 4x on request – please add extension .640 to the Model No.
Material / Surface finish
Material:
Stainless steel 1.4301:
Enclosure frame, roof, rear panel and gland plates: 1.5 mm
Door(s): 2.0 mm
Mounting plate: 3.0 mm sheet steel
Surface finish:
Enclosure frame and gland plates: Bare
Door, roof and rear panel: Brushed on the outside,
grain size 240
Mounting plate: Zinc-plated
Supply includes
Enclosure frame with door(s), mounting plate, gland plates, rear panel and roof, 2 support strips fitted in the enclosure depth (only with depth 600 mm).
Protection category
IP 55 to EN 60 529/10.91, NEMA 12 is met.
|
|
PE Rack Complete Professional cabinets - Complete Solutions for Networks and Professional servers
Project and Effi ciency Range with low-cost Complete
Cabinets for networks
-Models for maximum market coverage with 25 U and 43 U in
heights of 1200 and 2000 mm respectively, depths of 600, 800
and 900 mm and widths of 600 and 800 mm
-Extremely strong framework with a load bearing manufacturer capacity of up
to 700 kg
-Frame can be “halved”
-High quality powder painting fi nish in light grey RAL 7035 on all
panelling components
-All panelling, such as side panels and professional doors, can be removed in
seconds.
-Top and bottom modules prepared for professional brush strips and/or
ventilators
-Doors fi tted with T-handles and locks. Can be exchanged for
pivoted handles.
-Plinths are passively ventilated, 100 mm high.
-Standard depth-adjustable 19” mounting angles
-Extremely high savings on baying solutions due to intermediate
sets
Material:
-Framework, vertical: 1mm steel sheet, multiply profi led; horizontal:
2 mm rectangular tube.
-Panelling: 1 mm steel sheet
Finish:
-High-quality powder coating in light grey RAL 7035
-Top/bottom modules, installation set for mounting angles and
19” mounting angles all galvanised |
|
| Logstrup can supply customised 19" rack solutions to suit all requirements. Heights, depths and widths are infinitely variable due to the three dimensional design of the Logstrup system. Racks can be designed in an open framework system to give total freedom of access or fitted with professional doors and plates to provide safety, security and a pleasing aesthetic finish. |
|
IP 20 protection degree according to EN 60529 norm
258mm. depth
350mm. width
400mm. height
It is available in 2 versions and colours:
GREY RAL 7035
code: MAGN0001 - Standard type
code: MAGN0062 - with open-top uprights
BLACK RAL 9005
code: MAGN0462 - Standard type
code: MAGN0463 - with open-top uprights |
|
Features:
* Pre-assembled structure in aluminium.
* Quick mounting with 8 ¼ turn bolts.
*Accessibility from 4 sides.
* Flat pack packaging that reduces the transportation and stock cost.
*Absolutely reversible structure.
* Springswivel system which allows fast an easy assembly/ disassembly and changing of the opening direction without any tool.
* Standard option to customise the rack using different corner cap colours.
* Vertical and horizontal stock options.
* Easy installation and assembly in places with difficult access. |
|
Eta offers a number of RACK solutions to satisfy a majority of applications including:
19" swinging frames
19" fixed frames
19" rails
Double Hinge Boxes (CR)
- Swinging frames with solid rotation professional hinges are manufactured from sheet steel and offer outstanding strength and versatility. The rotation direction is reversible (left-right) and the opening angle varies according to professional cabinet width.
- Fixed frames are applied directly on the cabinet framework. Only for cabinet with 600 width.
- CR Box (Double Hinge)
CR Boxes have two sections. The central section is used for mounting 19" components whilst the rear section with mounting plate, can be used for assembling standard components. The front with silk-screened security glass offers excellent visibility and aesthetic. Door can be mounted left or right. |
|
A complete offer of chassis will cover all needs:
Industrial Rack Mount Chassis 4, 8, 14 or 20 slots with different combinations ISA/PCI.
Industrial Rack Mount Chassis with different height: 1U, 2U, 4U, 5U, 6U or 8U. Available with LCD screen
Switched mode power supply 150W in 500W AT / ATX / AT-
Function PFC - verbose power supply- Power supply " hot-swappable ",... Chassis with tolerance of breakdown,control of machines, control of temperature, indicators of states in front panel, management of aeration,...
|
|
| The new Internorm Stil desktop enclosure system is the innovative enclosure solution for the 19" sector. All space-optimised versions are based on the Interzoll module mounting rack programme and offer excellent value for money. Different front elements give the Internorm Stil its own individual and functional design. The enclosure variant with integrated ventilation (2 x 1/2 U) provides increased heat dissipation and is one rack unit higher on the outside. All standard models offer good EMC screening, which can be increased even further by the use of additional components. |
|
Dimensions acc. to IEC 60297 or IEEE 1101.1, Aluminum or sheet steel versions, up to superior EMC level. Large selection of assembly options.
|
|
SYSTEM-90E base racks are designed as 19'' subracks for mounting various modules. All racks are suitable for wall mounting. They are powered by 24 VDC, which simplifies the use of SYSTEM-90E in different power-supply systems.
Base racks are available with 5 to 19 slots, thus ensuring a cost efficient solution for various applications |
|
| Allows quick, easy assembly to the rack, as well as optimum wiring distribution. The new design, attached to the rack with L-shaped pieces that are adjustable for depth, with built-in, take-out panel and distribution base, allows access to the interior of the unit without the need to remove the unit from the rack. |
|
Permanent availability of your IT systems is undoubtedly crucial.
This is your company's heartbeat. For this reason, it is important to ensure stable conditions for your complex server and software system architecture. With this in mind, Rittal combines the five key elementary infrastructure components to create an extremely variable, and above all secure system:
Rack, Power, Cooling, Security, Monitoring & Remote Management.
With Rittal, a high level of IT availability is guaranteed. |
|
NT Box® 3-part Wall Professional cabinets - For optimal accessibility from 4 sides
High-grade steel housing (light grey RAL 7035) complete with basic
equipment.
-Hinged centre section, 500 mm, with a twoway ock
-Optimum accessibility for fast installation: once the door is open, the side
panels can be drawn forward
-Mounted ready for installation, glass door at front, inc. lock, central swivel
mounting frame,19” mounting angles at front, cable entry apertures in top
and bottom .
-Transportable packaging for single units
-Overall depth of 650 mm, from 6 - 18 adjustable
shelf height units.
The wall-mounted 3-part NT Box was specially
developed for small networks, sub-distributors
and fl oor distributors.
The major practical problem of accessibility is
solved by the fact that the door can be very
quickly removed once opened, allowing the side
panels of the centre section to be slid out forwards.
In addition, the entire centre of the box can
be swung out to one side.
This way, the housing is easily accessible from
all four sides and allows all components to be
installed easily.
To change the doors from left to right-hand
opening, simply lift out the hinge pin and replace
them in the fi xings provided.
|
|
PKM series professional cabinets are made up of a main unit and tempered glass professional door.
Two product families belong to the PKM system, with different cabinet depths: PKM-400 and PKM-500.
The removable side walls allow the access to the rear cabling while at the same time guaranteeing securety since they can be removed only after the front door has been unlocked.
PKM-400
DEPTH 413 mm
WIDTH 600 mm
Five dimentions availables:
MAGN0749 - h 360 mm - 6U
MAGN0750 - h 493 mm - 9U
MAGN0751 - h 626 mm - 12U
MAGN0752 - h 760 mm - 15U
MAGN0972 - h 1027mm - 21U
PKM-500
DEPTH 513 mm
WIDTH 600 mm
Five dimentions availables:
MAGN0753 - h 360 mm - 6U
MAGN0754 - h 493 mm - 9U
MAGN0755 - h 626 mm - 12U
MAGN0756 - h 760 mm - 15U
MAGN0973 - h 1027 mm - 21U
* * * SAME PRODUCT - DISASSEMBLED * * *
Two product families belong to the PKS system, with different cabinet depths:PKS-400 and PKS-500
PKS-400 (413 mm depth - 600 mm width)
Five dimentions availables:
MAGN0741 - h 360 mm - 6U
MAGN0742 - h 493 mm - 9U
MAGN0743 - h 626 mm - 12U
MAGN0744 - h 760 mm - 15U
MAGN0970 - h 1027 mm - 21U
PKS-500 (513 mm depth - 600 mm width)
Five dimentions availables:
MAGN0745 - h 360 mm - 6U
MAGN0746 - h 493 mm - 9U
MAGN0747 - h 626 mm - 12U
MAGN0748 - h 760 mm - 15U
MAGN0971 - h 1027 mm - 21U |
|
Elma offers AC and DC horizontal enclosures in 2U and 5U heights and a DC-only version in 4U height. They include a wide range of backplane, shelf management,and other options. Pluggable and redundant professional fan trays, PEMs and shelf managers provide the highest level of availability (99.999%). The units have been optimized via backplane signal integrity studies and chassis thermal simulation.
The 2nd Gen 19" rackmount vertical ATCA chassis is designed for carrier-grade applications. The 13U chassis features a 14 -slot Dual Star or Mesh backplane. The unit is fully pluggable, designed for NEBS compliance, and radial or bussed IPMB shelf management. The chassis has been optimized via thermal simulation studies.
|
|
AdvancedTCA (ATCA) is the new standard for telecom applications bringing the features of proprietary architectures and the CompactPCI standard with his high packing density and RAS (reliability, availability, serviceability) together.
|
|
- Integrated Systems
14 slot dual star or full mesh system; AdvancedTCA systems available in Stock-2 week delivery!
- ATCA backplanes
- Front Panels & Accessories
Hot Swap AdvancedTCA handle and AdvancedTCA Sheet Metal front panels and air block filler panels
- Adapter Boards
- Shelf Management
|
|
Intel® Server Chassis are designed and validated for easy, cost-effective integration with Intel® Server Boards. A full line-up of pedestal and rack-optimized chassis are available to meet your customers' diverse needs.
Intel® Server Chassis SR1500 is a performance 1U rack-mount chassis. Feature set supports the high-density server market
with: improved serviceability, accessory kits allowing
for configuration options and Intel® Cable Reduction Technology that simplifies server infrastructure by eliminating cables to support up to three hot-swappable SAS (Serial Attach-SCSI) or SATA (Serial ATA) hard drives and one slim-line optical device.
The Intel® Server Chassis SR2500 features integrated manageability with upgrade options including flexible drive configurations - up to 6 SAS or SATA HDDs or 5 drives plus tape and SAS RAID options which increases data protection and HDD I/O performance. Intel® Server Chassis SR2500 is designed for increased uptime and tool free serviceability.
The Intel® Server Chassis SC5400 offers an ideal solution for a variety of business environments. With great reliability, wide-ranging scalability, strong manageability, the SC5400 is a solid, cost-effective solution for a range of environments, from small businesses to database professional servers. The SC5400 chassis family supports SAS, SATA and SCSI drives for configuration and application flexibility. Applications needing maximum reliability, serviceability and uptime can benefit from the SC5400LXI SKU, which integrates fully redundant hot-swap psus and professional fans, and support for 6-drive hot-swap SAS/SATA drives.
|
|
Highlights
1Gb PICMG® 2.16 platforms
Easier integration - bring solutions to market faster
Comprehensive shelf management throughout platforms
Flexibility and scalability, maximizing reuse
Targeted at high availability and standard applications
Wide range of interoperable blade functionality
- Manufacturers of single board computers
- I/O & Communication
- Media & Voice Processing
- Storage
- Embedded SS7 & SS7/IP
- Carrier Blades |
|
Construction:
-Back and side panels manufactured in 1.5mm sheet steel.
-Mounting plate manufactured in 2.5mm sheet steel.
-Door Manufactured in 2mm sheet steel with reinforcing frame.
Finish:
T&J standard cycle thermosetting epoxypolyester powder pigment.
-Structure,door RAL 7032 textured finish.
-Mounting plate:RAL 2004 smooth finish(Also available for zinc coated)
Protection degree:IP 55 to EN60 529 NEMA 12.
Supply includeF
-Back and side panels(structure)
-Mounting plate.(Also available without mounting plate)
-4 Mounting plate suppots.
-Front door with reinforcing frame with 4 professional hinges a 4 point locking system.
-Supplier of cable gland plate supplied
-4 Lifting eyebolts |
|
|
|
Computer boxes, Chassis
