Underground mining equipment

Power in kVA: 9, 8 kVA
Rated capacity: 6, 7 kW
Voltage: 230 V - 400 V

Number of cylinders: 3 Governor type: mechanical Specifications: 4-cycle engine, direct fuel injection , liquid-based cooling Displacement: 1,36 L Compression ratio: 18:01 Engine starting type: electrical 12V Air inlet system: natural ...

Power in kVA: 8, 10 kW
Rated capacity: 8, 9 kW
Rotational speed: 1,500 rpm

Number of cylinders: 3 Governor type: electronics Specifications: 4-cycle engine, direct fuel injection , liquid-based cooling Displacement: 1,53 L Compression ratio: 18:01 Engine starting type: electrical 12V Air inlet system: natural ...

Power in kVA: 38, 41 kVA
Rated capacity: 30, 33 kW
Voltage: 230 V - 440 V

Number of cylinders: 4 Governor type: electronics Specifications: 4-cycle engine, direct fuel injection , liquid-based cooling Displacement: 4,2 L Engine starting type: electrical 24V Type of air intake: natural aspiration Tank ...

The TM4000 Series offers multiple EDS systems to choose from based on application and budget. All detectors offered are of compact design and do not require LN2. *: Example configuration of Quantax75 EDS in combination with a TM4000 ...

The AZtec series offers multiple EDS systems to choose from based on application and budget. High-performance detectors with an energy resolution of 129 eV (Mn-Ka) are available in all classes. • Live Spectrum Viewer with Automatically ...

Power in kVA: 100, 110 kVA
Rated capacity: 88, 80 kW
Voltage: 230 V - 400 V

XCMG generator sets provide customers with reliable, safe, energy-saving, environmentally friendly and intelligent backup power source and base station power supply. It can be widely used in mines, ports, communications, transportation, ...

Power in kVA: 125, 156 kVA
Rated capacity: 100, 110 kW
Voltage: 230 V - 400 V

XCMG generator sets provide customers with reliable, safe, energy-saving, environmentally friendly and intelligent backup power source and base station power supply. It can be widely used in mines, ports, communications, transportation, ...

Power in kVA: 250, 275 kVA
Rated capacity: 200, 220 kW
Voltage: 230 V - 400 V

XCMG generator sets provide customers with reliable, safe, energy-saving, environmentally friendly and intelligent backup power source and base station power supply. It can be widely used in mines, ports, communications, transportation, ...

Speed: 0.01 m/s - 0.1 m/s
Bulk throughput: 100 t/h
Effective width: 2,000 mm

With respect to other apron feeder systems, the RUD apron feeder remains sealed both during straight as well as curved conveyor sections. This system was developed based on the proven round steel chain, and is specifically attuned to ...

ITMH100-6L New Design Intel® Core™ i5-1135G7 M Series Box PC KEY FEATURES Intel® Tiger Lake UP3 Core™ i5-1135G7 processor, rugged Box PC Support LAN port x6 Multi Video Output, HDMI/Display Port Quick & Easy Replaceable Hard Disk ...

IBMH100 Intel® Atom® E3845 embedded single board computer KEY FEATURES Auto detection of the connected display, No settings necessary Quick & Easy Replaceable Hard Disk Design, No Tools needed Support wide range 12-24V DC input embedded ...

IE32SB3-101-6L Intel® Celeron® N6210 Standard Box PC KEY FEATURES Intel® Celeron® Elkhart Lake N6210 Processor 1 x DDR4 SO-DIMM 3200 MHz, max. 16GB Supports 2 x USB 3.2 Gen 1, 6 x Giga LAN Elegant and slim mechanical design Fanless ...

The modular CA Trough Screw Conveyor system is highly versatile offering numerous solutions for conveying powdery or granular materials. They are widely used all over the world in industries such as pet food, plastics processing, soap, ...

THF / TCF Screw Feeders and Conveyors for Filler Dust are designed to match the main requirements of the asphalt industry in feeding and conveying both hot and cold filler dust in stationary asphalt plants, at one end from the central ...

TP / TE Tubular Screw Conveyors are used for both batch and continuous operation in applications where durability and easy replacement of those conveyor components that are subject to wear are among the main requirements. Typically this ...

Rotational speed: 700 rpm - 1,500 rpm

The Vibratory Disc Mill RS 200 is engineered for size reduction, mixing, grinding of medium-hard, frail or course materials to analytical quality. The Vibratory Disc Mill by Retsch, with a variable speed of 700-1,500min, is designed for ...

The Retsch Disc Mill DM 200 is used for grinding medium-hard, hard and brittle materials. Thanks to its robust design it is suitable for usage under rough conditions in pilot plants and laboratories. A major area of application is quality ...

Rotational speed: 912 rpm

The Vibratory Disc Mill RS 300 XL is the mill of choice when it comes to the extremely quick, loss-free and reproducible grinding of medium-hard, brittle and fibrous materials to analytical fineness. It is possible to process up to 4 ...

Rotational speed: 100 rpm - 1,100 rpm

FRITSCH Planetary Ball Mills – high-performance all-rounder in routine laboratory work The Planetary Micro Mill PULVERISETTE 7 premium line with 2 grinding stations is designed for a broad range of applications and ideally suited for ...

Rotational speed: 50 rpm - 400 rpm

Ideal for large quantities The Planetary Mill PULVERISETTE 5 classic line with 4 working stations delivers fast and reliable, due to the particularly high-energy effect of the grinding balls, loss-free grinding results of hard, medium-hard, ...

Features Cutting head The velocity of cutting line matches well with the rock by the higher single cutting capacity of cutting teeth. The arrangement of cutting teeth has reached the world leading level with the strong rock breaking ...

Cutting head The velocity of cutting line matches well with the rock by the higher single cutting capacity of cutting teeth. The arrangement of cutting teeth has reached the world leading level with the strong rock breaking ability, ...

Features Cutting head The cutting head adopts international first-class technology, the design of single cutting force is large, the arrangement of cutting teeth is reasonable, and the ability of rock breaking through fault is strong. ...

In our category hoist chains we offer a variety of high class chain types as well as services for the design of chain drives. The employment of chains with an intelligent and stiff cross profile in the hoist technique is due to our innovation. As ...

Final grain size: 37 µm - 840 µm
Output: 7 t/h - 15 t/h
Motor power: 200 kW - 250 kW

LM Slag vertical mill High drying efficiency, Low running cost, Good environmental effect LM Vertical Mill integrates crushing, drying, grinding, classifying and conveying together, and it is specialized in processing non-metallic minerals, ...

Output: 30 t/h - 80 t/h

Sand powder vertical mill Feeding size (mm): <30 Moisture content (%): ≤3% Processing capacity (t/h): 30-80 Output fineness (≤0,08 mm): ≥25% Output fineness (≤3mm): ≥80% Sand and powder are produced at the same time, one machine ...

Final grain size: 45 µm - 1,600 µm
Rotational speed: 86 rpm - 110 rpm
Output: 6 t/h - 23 t/h

MTW145G European Trapezium Mill Large capacity, Low consumption, Environmental friendly MTW European Trapezium Mill has a large market share in the grinding industry. Whether bevel gear overall drive, inner automatic thin-oil lubricating ...

Bulk throughput: 1,000 t/h

The ship unloading conveyors comprises an equipment made of a mobile hopper on wheels and mobile conveyor belts. The hopper collects the bulk material from the mobile shaft of the self-unloading ship, and it is provided with a mobile ...

Overall length (working): 2,000 mm
Overall width (working): 1,650 mm
Machine weight: 3,000 kg

Designed and built with innovative technical solutions, it is ideal for all types of work and all types of terrain. The drilling unit can also be mounted on a vehicle and can also be equipped with radio-control and magnetic feeder ...

Overall length (working): 2,400 mm
Overall width (working): 2,000 mm
Machine weight: 10,000 kg

Designed and built with innovative technical solutions, it is ideal for all types of work and all types of terrain. The drilling unit can also be mounted on a vehicle and can also be equipped with radio-control and magnetic feeder ...

Drilling depth: 6 m
Machine weight: 3,500, 4,500 kg

The drilling slide is built up privileging strength and use simplicity and it can be mounted on every type of excavator from 3000 to 10000 kg. The slide is supplied complete with a push-button panel which allows to control the rotation ...

Rotational speed: 450 rpm
Motor power: 4 kW

The MACSA 300 Overhung Disintegrator Hammer Mill has been designed to satisfy the needs of Laboratories, Research Institutions and Industries requiring size reduction on a semi-production scale. The Mill is fabricated from Mild Steel ...

Bulk throughput: 2,000 t/h

Belt Conveyors In bulk storage facilities and port terminals, it is often necessary to convey materials across large distances. A ship unloading point may be several kilometers away from the storage terminal. For such tasks, belt conveyors ...

Compared with other conveyor equipment, the bicephalous bearing of this auger conveyor from Zibo United Tech Machinery Co., Ltd. has been installed outside the shell. The hanger bearing is a rolling and sheave interconnected structure ...

ST series underground mining trucks are mainly used in underground non-coal mines, mainly for transporting mine materials after blasting, but also can be used in highway, railroad and other narrow operating site, low, harsh environment ...

ST series underground mining trucks are mainly used in underground non-coal mines, mainly for transporting mine materials after blasting, but also can be used in highway, railroad and other narrow operating site, low, harsh environment ...

ST series underground mining trucks are mainly used in underground non-coal mines, mainly for transporting mine materials after blasting, but also can be used in highway, railroad and other narrow operating site, low, harsh environment ...

NYRIM elevator bucket. -Suitable for the very toughest of industrial applications. The Atlas AM bucket is anti-static, fire resistant and almost indestructible even in industrial applications, such as aggregates. Product Features • ...

Output: 150 kg/h - 200,000 kg/h

The POITTEMILL pendulum roller mill is a vertical mill that works by compressing the material bed. The pendulums mounted on a star wheel are driven by a vertical shaft. Each pendulum is fitted with a grinding roller that rotates upon ...

Output: 5 t/h - 500 t/h

DESCRIPTION The Cylinder mill, commonly known as the Roller Press works by crushing the material between two cylinders kept under pressure by a hydraulic system (2 to 10 T/linear cm). This mill uses a patented process of pulsating ...

Output: 1 kg/h - 50,000 kg/h

The Universal FNG mill is an impact grinder that has the key advantage of being fully adaptable. It can be equipped with different grinding tools (hammer plate, pin plate or blade plates) which are adjustable in relation to the product ...

Length: 22 cm
Width: 9.1 cm
Height: 27.6 cm

HELIUS is the first in the series of ARUN’s XRF handheld spectrometers. Using X-ray fluorescence analysis technology, this mid-size instrument analyses products of various materials quickly, reliably, and non-destructively. Weighing 1.51 ...

Speed: 0.5 m/s - 3 m/s
Bulk throughput: 3,000 t/h
Effective width: 500 mm - 2,000 mm

Each belt conveyor is designed in compliance with the most advanced and up-to-date international technical standards (CEMA, ISO) and Motridal’s engineering department can provide, upon request, complete system, including steel structures ...

Screw conveyors are often used inside plants because they are completely enclosed, thus material transfer is weather-proof and dust-free. Thanks to the small number of installed components, these machines require minimum maintenance. Motridal’s ...