Circular saws

109 companies | 482 products
Filters
  • What’s new?
    Submit
circular saw / for wood - VNK 300|360

The flexible double arbor circular saw VNK is used as primary-, secondary break down or combination machine in medium...

circular saw / for wood - DWK 700

The flexible double arbor circular saw DWK 700 is used as a primary-, secondary break down or combination machine in medium to large sawmills.

In...

circular saw / for wood - DWK SG|ZE

Universal Sawing Centers for primary and secondary breakdown with merry-go-round system for large log diameters

The circular saw unit DWK 6 captivates with three independently moveable saw units...

circular saw / for wood - FVHTK

Double arbor circularsaw unit for 2 horizontal split cuts

The double arbor...

circular saw / for wood - BNK 6

Top arbor circularsaw unit for all edging/resawing jobs from 17-225mm sawing height

The saw arbors of the BNK are adjustable in...

{{productDetail[117063]}}
circular saw / for metal - max. Ø 65 mm, 750 W | 754N

Disc Ø 225 mm, single phase motor, one speed

-blade...

circular saw / for metal - max. Ø 70 mm, 1.1 kW | 756N

Disc Ø 250 mm, single phase motor one speed

-blade...

circular saw / for metal - max. Ø 70 mm, 1.35 kW | 759N

Disc Ø 250 mm, three phase motor, two speed

-blade...

circular saw / for metal - max. Ø 90 mm, 2.2 kW | 761N

Disc Ø 315 mm, three phase motor, two speed

-blade...

miter saw / circular / automatic - 1 800 W | 1050 3D

Three functions mitresaw, with blade D.305 mm and extraordinary cutting...

{{productDetail[16213]}}
cross-cut saw / circular - US-X


Available in 28, 50 or custom lengths of cut
Scoring for chip free...

cross-cut saw / circular / automatic - US-X


Available in 28, 50 or custom lengths of cut
Scoring for chip free...

{{productDetail[116223]}}
circular saw / for metal - 10

Complete with 3 HP TEFC motor, coolant tray, magnetic starter with 110 volt at the pushbuttons, steel stand, settling tank and pump

Ideal For METALLURGICAL LABS as well as for Exotic Alloys. Typical wet cutting speeds are 30 seconds per square inch of material based on...

circular saw / for metal - 14 - 16

COMPLETE with 10 HP TEFC motor, magnetic starter with 110 volt at the pushbuttons, air operated “V” shaped chain hold-down vise, coolant tray, settling tank and pump
Ideal For METALLURGICAL LABS as well as for Exotic Alloys. Typical wet cutting speeds are 30 seconds per square inch of material based on application
This dependable EVERETT cutoff features an adjustable...

{{productDetail[11862]}}
circular saw / for aluminum / CNC - Ø 550 mm | Mizar

Electro welded solid steel construction
Machine totally enclosed
Axis movement on linear guides and recirculating ballscrew
CNC unit with...

{{productDetail[41292]}}
granite bridge sawing machine / for marble - max. 3500 x 400 x 450 mm | FTS series

The movements of the mobile parts of the machine are all under operator control, and the machine is suitable to cut slabs of marble and granite, virtually of any thickness, with the following main characteristics:

...

{{productDetail[100453]}}
programmable automatic cutting line - JIH-I 455 A/B

The 455 A/B Series manufactured by JIH-I is an automatic sawing machine. This device...

{{productDetail[127135]}}
{{productDetail[116379]}}
circular saw / hydraulic - max.120 x 100 mm | A3

Cutting capacity
- Round tube mm. 12/120
- Square tube mm. 100x100
- Rectangular tube...

circular saw / for bars / for tubes / with automatic loading - max. ø 125 mm, 100 x 150 mm | VK370

VK 370 - Technical Data
- Disk diameter mm. 250-370
- Disk motor Kw 3/4
- Feed stroke mm. 2000
Cutting capacity 90°
- Round...

circular saw / programmable - ø 140 mm, 125 x 125 mm, 220 - 240 mm | KS 425 AR

Blade sawing machine with blade stroke from underneath; this system is
particularly suitable for cutting profiles and tubes; for the clamping
system as well as for the blade upstroke motion which improve the
pedormance and increase the blade life. The bar feed and angular blade
support head rotation are CN-controlled for the programming of the
lengths...

circular saw / hydraulic - ø 140 mm, 125 x 1254 mm, 220 - 240 mm | KS 425H

Semi-automatic blade sawing machine, controlled by a microprocessor, fully hydraulic-operated, with upstroke blade for angled cuts from ±90'.
Semi-automatic cyde: closing of the horizontal vices, of the vertical vice, motor start, biade upstroke, biade stop, head descent, opening of the
vices. Manual cycle: vice opening and closing head descent and upstroke, storing of the head up and...

programmable automatic cutting line - max. 100 x 100 mm | AR1

ARI - Technical Data
Cutting capacity
- Round tube mm. 100
- Square tube mm. 100x100
- Rectangular tube mm. 100x80
- Full...

{{productDetail[33413]}}
carbide blade saw / circular - P-100B

Capacity: Round: Min. 5/8; Max. 4; Square: Min. 5/8; Max. 3-1/8.
Blade: 360mm x 2.5mm.
Blade Speed Range: 30 130 RPM controlled through an Inverter Drive.
Servo Blade Feed: Servo drive blade feed...

carbide blade saw / circular - P-150B

Capacity: Round: Min. 2 3/4, Max. 5.9; Square: Min. 2 3/4, Max. 4-1/8; Rectangle: Min. 2 3/4, Max. 4 3/4.

Blade: 460mm x 2.7mm.
Blade Speed Range: 30 130...

circular saw / carbide blade - P-70B

Capacity: Round: Min. 3/8, Max. 2-3/4; Square: Min. 3/8; Max. 2-3/8.
Blade: 280mm x 2.0mm.
Blade Speed Range: 30 150 RPM controlled through an inverter...

{{productDetail[11669]}}
circular saw / for aluminum / CNC - max. ø 300 mm

1.This equipment adopts TCT Saw Blade; it's a special-purpose equipment for accurate cutting the aluminum

and copper.

2.Adopt...

circular saw / automatic / for metal - ø 250 - 400 mm | KM-xxxA series

1.Use HSS blade with slow rotating speed. Suitable for cutting stainless steel and carbon steel, without burrs.

2.Servo-motor control feeding with high...

circular saw / for metal - ø 250 - 400 mm | KM-A series

1.Use HSS blade with slow rotating speed. Suitable for cutting different materials without burrs.
2.Feeding is pneumatic or hydraulic, (optional)
3.Controlled by...

circular saw / for metal - ø 250 - 400 mm | KM-Q-PA series

1.This series of machine adopts hydraulic drive. It's especially suitable for thick material.

2.Vertical and stable cutting.

3.Adopt two sides and two direction...

circular saw / semi-automatic / for aluminum - ø 250 - 350 mm | KM-PA, KM-PA-S series

1.This series of pneumatic cutting machine is especially suitable for thin wall tube.

2.Adopt two sides and two direction clamp which make...

{{productDetail[37250]}}
circular saw / for wood - VC 700 IND 110/75

Is a multi-blade double axis circular saw with two motors: a 110 kW one and a 75 kW one....

circular saw / for wood - SDH 320

The Mebor SDH 320 is a multi-blade circular saw designed for cutting thin logs that have a maximum diameter of 320 mm. The Mebor SDH 320 is great for smaller lumber that is not suitable...

circular saw / for wood - VR 800

The VR 800 is a multi-blade circular saw for edging boards and allows the possibility of up to 10...

circular saw / for wood - VR 900

Is a multi-blade circular saw, allows the use of up to 12 circular...

circular saw / for wood - CEL 700 P

The CEL 700P is a circular saw for cross board cutting. It has a pneumatic board...

{{productDetail[117067]}}
circular bridge sawing machine / automatic - 60 – 200 mm | RKA

Suitable for solid material, tubes or profiles of almost all standard...

circular saw / CNC / with automatic loading - 4 – 800 mm | KTC NF

heavy duty pivot arm saw head CNC
carbide-tipped saw blades
infinitely variable cutting speeds
...

circular saw / CNC / with automatic loading - KTC F

Heavy duty pivot arm saw head CNC
Material feeding CNC
Carbide and hss saw blades
Infinitely...

{{productDetail[83709]}}
circular saw / cold / manual - 45° | P225

The P225 is a manual, pivot arm, bench model cold saw ideal for use...

cold saw / circular / manual - 45° | P250

The P250 is a manual, pivot arm cold saw ideal for use in small...

cold saw / circular / manual - 45° | P350

The P350 is a manual pivot arm cold saw ideal for use in small job shops....

circular saw / cold / vertical / manual - 45° - 60° | C350-2AV

The C350-2AV is a manual vertical column cold saw ideal for quick, clean, accurate metal cutting.

The...

cold saw / circular / vertical / semi-automatic - 45° - 60° | C350-2S

The C350-2S is a semi-automatic vertical column cold saw ideal for light to medium...

{{productDetail[26851]}}
circular saw / for wood - SP400

The pendular circular saw OMEC SP 400 is utilised for cutting the wooden boards and by products....

{{productDetail[116255]}}
cross-cut saw / circular - SPT – TEP

Complete range of cross cut saws with retractable blades and various mechanizations

MACHINE...

circular saw / cross-cut - SPT Optim

SPT cross cut saw equipped with a digital pusher with optimization
- The part is placed by the operator on a roller conveyor.
- He marks with a fluorescent pencil the cuts he wishes, in order to eliminate defects.
- The pushing tray equipped with a sensor...

{{productDetail[25644]}}
circular saw / cross-cut - SPT Optim

We have been producing cross-cut saws since...

cross-cut saw / circular / automatic - Push_Cut_CX II

Simple and maintenance-free operation.
Thanks to the inclined position of the machine, side-pressure units can generally be dispensed with. The timber slides automatically against the fence.
The saw blade is very convenient to change from the...

cross-cut saw / circular / automatic - Push_Cut_CX-Z II

Alongside the benefits of the conventional push-feed saw Push_Cut_CX II, the gripper version Z offers a number of impressive additional features designed to help maximize profits

A plus for positioning
The gripper system ensures very precise feed and exact positioning of even difficult workpieces (e. g. iced or wet timber or coated boards).
A plus for reliability
...

cross-cut saw / circular / automatic - RAPID series

The RAPID Series CNC cross-cut systems are designed for continuous heavy-duty operation. With this series PAUL offers profitable solutions for all industrial requirements in the field of high-performance cross-cutting with maximum timber yield.

Unlike other high-speed...

cross-cut saw / circular / automatic - C11 series

Apart from the cross sectional size, the C11 series is in every way equal to the larger models:



Thoroughly engineered machine frame ensuring stability and durability
Clear construction and additional...

{{productDetail[117099]}}
cross-cut saw / circular / automatic - C11 series

Our range of up-stroking saws provide an effective answer for cutting rigid
plastic...

{{productDetail[72920]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation