large saw / band / double-column / CNC
large saw
H 1000 II

Diameter cut capacity: 400 mm - 1000 mm

This H1000II features dual cut control system that is easy to set up as it was being merged along with the fine feed roller for material indexing. Its blade feed is controlled by pressure and flow. This Amada product hinders the movement ...

See the other products
Amada Machine Tools
large saw / band / double-column / semi-automatic
large saw
H 1300 II

Diameter cut capacity: 530 mm - 1300 mm

This hydraulic vise offers a simple set up. While sawing, it serves to eliminate material movement. The entire range has a positive clamping system. The vise also comes with a dual cut control system. This helps facilitate a simple, ...

See the other products
Amada Machine Tools
miter saw / double-column / semi-automatic
miter saw
BMSY-560DG NC

Diameter cut capacity: 560 mm

Capacity of the machine is 500/850 and projected for fast cuttings straight or with angle . Sensetivity of the machine lets cutting with percentage angles. BMSY 560 DG has automatic control system and open to future developments. Rollers ...

See the other products
Beka-Mak
double-miter saw / double-column / semi-automatic
double-miter saw
BMSY-750DG NC

Diameter cut capacity: 800 mm

Two way powered mitre with NC angle setting Features ►Powered mitre setting with NC control ►Mitre cuts to +/-60 deg with +/-0.1 deg tolerance ►5-deg inclined blade for optimum cutting performance ►Hydraulic blade tensioning ►Blade ...

See the other products
Beka-Mak
blade saw / band / double-column / horizontal
blade saw
HBS A C series

Diameter cut capacity: 0 mm - 560 mm

Rapid down to cut height with automatic transition to the sawing feed rate (light sensor) Powered chip brush, reliably provides clean saw teeth Robust blade guides and wear-resistant carbide guides Desired quantity and ...

band saw / double-column / horizontal / automatic
band saw
HBS A series

Diameter cut capacity: 0 mm - 325 mm

Automatic bandsaw for sawing solid material, tubes, profiles Solid cast monoblock saw frame Automatic lift of the saw heat at the end of the cut by hydraulic cylinder with adjustable lifting height Material feed and clamping is carried ...

band saw / horizontal / double-column / automatic
band saw
400 × 350 mm | KBS 400 DG

Band Saw with Mitre Unit for light to medium Steel Construction and Trading Capacity Range 90° [mm]: 400 x 350 Capacity Range (w x h): 400 × 350 mm Vertical saw in robust twin-column construction Single, layer and bundle ...

See the other products
KALTENBACH
band saw / horizontal / double-column / automatic
band saw
400 × 350 mm | KBS 400 DG NA

Band Saw with Mitre Unit for light to medium Steel Construction and Trading with an attached Automatic Feed Capacity Range 90° [mm]: 400 x 350 Capacity Range (w x h): 400 × 350 mm Vertical saw in robust twin-column construction ...

See the other products
KALTENBACH
band saw / horizontal / double-column / automatic
band saw
PA13/3 EPC

Capacity: 13” x 14” rectangular (250 x 355 mm); 13” round (330mm) Blade: 1-1/4” x .042” x 162” (34 x 1.1 x 4115 mm) Blade Tension: Hydraulically controlled tension (30,000 psi) provides consistent square cutting accuracy. The motion ...

See the other products
MARVEL
band saw / horizontal / double-column / automatic
band saw
PA18/3 EPC

Capacity: 18 x 18 rectangular (460 x 460 mm); 18 round (460 mm) Blade: 1-1/2 x .050 x 154 (41 x 1.3 x 4670 mm) Blade Tension: Hydraulically controlled tension (30,000 psi) provides consistent square cutting accuracy. The motion ...

See the other products
MARVEL
band saw / horizontal / double-column / automatic
band saw
800SNC

Part of the new StructurALL family of machines, the 800-SNC is an affordable NC controlled angle cutting saw that increases flexibility and provides greater efficiency for general purpose sawing. The saw head swings 60 degrees, conveniently ...

See the other products
DoALL Sawing Products
horizontal saw / double-column / automatic / electric
horizontal saw
C-650S

The DoALL C-650S horizontal band saws feature a full 26 (660 mm) cutting capacity and are available in 3 models with manual or automatic numerical control and a stationary or swivel base for production sawing of all materials including ...

See the other products
DoALL Sawing Products
horizontal saw / double-column / automatic / electric
horizontal saw
max. ø 260 mm, 300 x 260 mm | MEBApro 260 AP

90° automatic straight cutting bandsaw Simple and easy to use NC-control Innovative electric saw feed with ball screw technique: provides ultimate cutting performance and quality while minimizing blade wear Powerful ...

See the other products
MEBA Metall-Bandsägemaschinen GmbH
horizontal saw / double-column / semi-automatic / electric
horizontal saw
max. ø 335 mm, 500 x 335 mm | MEBAeco 335 G/DG

Innovative electric saw feed by ball screw technique: An innovative electric ball screw saw feeding system provides ultimate cutting performance and quality while minimizing blade wear Uses of latest linear ball guideway ...

See the other products
MEBA Metall-Bandsägemaschinen GmbH
horizontal saw / double-column / semi-automatic / electric
horizontal saw
60° | S-23P

The S-23P is a semi-automatic scissor style band saw providing exceptional miter cutting capability for light to medium duty applications. This new model has been completely redesigned and features a manual to semi-automatic mode control ...

See the other products
HYD•MECH
band saw / horizontal / double-column / automatic
band saw
90° | H-14A

The brand new H-11A is an automatic horizontal band saw providing accurate 90° metal cutting for medium to heavy-duty applications. A Windows based touch screen NC controller stores up to 99 jobs with 5 in queue. It operates both manual ...

See the other products
HYD•MECH
band saw / horizontal / double-column / automatic
band saw
max. ø 260 mm, 300 x 260 mm | OL 260 AP

Fully automatic bandsaw for straight cutting; * Material feeding – mechanically, by a ball screw, single stroke 600 mm; * Material clamping – hydraulically, via short stroke cylinders. Iinfinitely variable adjustable clamping pressure; * ...

See the other products
Siloma
band saw / horizontal / double-column / automatic
band saw
max. ø 320 mm, 320 x 320 mm | OL 320 AP

Fully automatic bandsaw for straight cutting; * Material feeding – mechanically, by a ball screw, single stroke 600 mm; * Material clamping – hydraulically, via short stroke cylinders. Iinfinitely variable adjustable clamping pressure; * ...

See the other products
Siloma
band saw / horizontal / double-column / semi-automatic
band saw
max. 100 m/min (328 ft/min) | SH-5542

Two oversized, precision ground dual columns support and guide the massive saw head. This dual column feature insures rigid support throughout the cutting cycle by keeping the blade parallel and square to the work piece. Blade Drive: The ...

See the other products
COSEN
band saw / horizontal / double-column / semi-automatic
band saw
max. 100 m/min (328 ft/min) | SH-7050

Cosen's SH-800F and SH-2028F are excellent machines for metal cutting, due to its special design and rigid structure. The frame's movement is guided through TWO COLUMNS which are reinforced with a CROSS LINK on top of both columns, so ...

See the other products
COSEN
band saw / horizontal / double-column / automatic
band saw
CHB 320 DC

It is well supported by two rigid hard-chrome plated & ground vertical columns, which are guided by self lubricated bronze bushes. The blade is guided by adjustable bearings & carbide wear pads. The cutting blade can be tightened and ...

See the other products
Santec Hydrofluid Engineers
band saw / horizontal / double-column / automatic
band saw
CHB 520 DC

It is well supported by two rigid hard-chrome plated & ground vertical columns, which are guided by self lubricated bronze bushes. The blade is guided by adjustable bearings & carbide wear pads. The cutting blade can be tightened and ...

See the other products
Santec Hydrofluid Engineers
band saw / horizontal / double-column / automatic
band saw
ø 260 mm, 310 x 260 mm | H-260HB

Shuttle type automatic feed. P.L.C. control for all electric and hydraulic function. Hydraulically controlled dual vise full stroke clamping system. (only for H-260HB) Floating shuttle vise system. Split front vise. ...

See the other products
EVERISING
band saw / horizontal / double-column / automatic
band saw
ø 360 mm, 360 x 360 mm | H-360HA

Shuttle type automatic feed. P.L.C. control for all electric and hydraulic function. Hydraulically controlled dual vise full stroke clamping system. (only for H-260HB) Floating shuttle vise system. Split front ...

See the other products
EVERISING
band saw / double-column / automatic / CNC
band saw
SWN 420

Standard Accessories NC ( Numeric ) Control System , Hydraulic Vise , Automatic Driver , Inverter , Hydraulic streching , Apparatus Multiple Cutting of Material , Material Carrier , Encoder for length of material , Chip drawer , Material Conveyor

See the other products
Baertec
band saw / double-column / automatic / for metal
band saw
SWO 420

Standard Accessories Hydraulic Vice , Automatic Driver , Inverter , Hydraulic streching , Apparatus Multiple Cutting of Material , Material Carrier , Material Counter Chip drawer , Material Conveyor

See the other products
Baertec
band saw / horizontal / double-column / automatic
band saw
10 100 x 54 x 1.6 mm | UMSO 1010 SF

TECHNICAL SPECIFICATIONS (UMSO 1010 SF) Rectangular Square Diameter 90° cutting 1010x1050 1010 1010 Vice Jaws Height 770 Main Motor : 11 KW Coolant Motor : 0,37 KW Hydraulic Motor : 1,1 KW Cutting ...

See the other products
Uzay Makina
horizontal saw / double-column / semi-automatic / electric
horizontal saw
4320 x 34 x 1.1 mm | UMSY 350

Blade breakage detection and auto shutoff Coolant pump Cutting height adjustment Double direction, 45° angular cut by adjustable vice jaws Electrovariator for blade speed Ergonomic moveable control panel Hydraulic vice Hydromechanic ...

See the other products
Uzay Makina
band saw / horizontal / double-column / semi-automatic
band saw
260 x 260 mm | HBS 260 S

presents with the model HBS 260 S-HA a high speed metal band saw which convinces by its characteristics: durable building method control friendliness very high quality standard hydraulic sinking rapid traverse ...

See the other products
DP Werkzeugmaschinen GmbH
band saw / horizontal / double-column / semi-automatic
band saw
320 x 320 mm | HBS 320S-HA

presents with the model HBS 320 S-HA a high speed metal band saw which convinces by its characteristics: durable building method control friendliness very high quality standard hydraulic sinking rapid traverse ...

See the other products
DP Werkzeugmaschinen GmbH
horizontal saw / double-column / semi-automatic / electric
horizontal saw
max. ø 120, 100, 180 x 100 mm | H 601

Possibility to make cuts with variable angle up to 60° to the left, with the manual shifting of the saw frame. Steel sawframe with tubular section; worktable supported by a central pivot with preloaded bearings. Sawframe movement onto ...

See the other products
imet spa
horizontal saw / double-column / semi-automatic / electric
horizontal saw
max. ø 510, 480, 610 x 450 mm | H 601 AF-NC

The H 601 AF-NC is a semi-automatic dual-column miter horizontal band saw, manufactured by imet spa. This product is ideal to use in cutting sections of steelwork, tubes and solids. It can cut with variable angle up to 60° to the left. This ...

See the other products
imet spa
band saw / horizontal / double-column / automatic
band saw
QuadroLine

Reducer bandsaw sytem for high throughput, recovery and maximum flexibility The reducer bandsaw allows to process large sawing heights with a minimum saw kerf. The positioning of the saw lines and therefor the production of any lumber ...

band saw / horizontal / double-column / semi-automatic
band saw
max. 25 m³/8h | 1000

weight: cca. 4380 kg height: 1870mm width: 3080mm diameter of main wheels: 1000mm main motor power: 15kW,18,5kW ali 22kW max. diameter of the log: 950mm capacity of cutting: max. 25m3 / 8h depends from type, ...

See the other products
Wravor d.o.o.
band saw / horizontal / double-column / semi-automatic
band saw
max. 28 m³/8h | 1100

weight: cca. 4.600 kg height: 1970mm width: 3330mm diameter of main wheels: 1100mm main motor power: 15kW,18,5kW ali 22kW max. diameter of the log: 1050mm capacity of cutting: max. 28m3 / 8ur (depends from ...

See the other products
Wravor d.o.o.
band saw / horizontal / double-column / automatic
band saw
max. ø 24" x 11' (ø 610 x 3 300 mm) | LT10

Simple, Accurate Sawing - Easily push the cutting head through the log to produce high quality lumber. - Heavy-duty ball bearing rollers ensure smooth operation - Zinc-coated rust resistant bed and log clamps The Wood-Mizer ...

band saw / horizontal / double-column / automatic
band saw
max. ø 28" x 11' (ø 710 x 3 300 mm) | LT15

The LT15 is an overachiever in its class and has produced more than 2.5 times its published board foot per hour rate in several industry competitive events. The LT15 is a powerhouse that will take on any size project, dream, or lumber demand.

band saw / horizontal / double-column / semi-automatic
band saw
W-9-1

The W-9-1 is the flagship model of the W. F. Wells, Inc. product line and is the premier double column machine on the market. The double column design is universally recognized as the optimum method of sawing. The W-9-1 is equally adept ...

See the other products
WF Wells Inc
band saw / horizontal / double-column / semi-automatic
band saw
W-10-1

Specifications Capacity .......................... Rectangular at 90° 10" High x 17" Wide, Round at 90° 10" Diameter Optional Miter Vise.......... Rectangular at 45° 10" High x 7½" Wide, Round at 45° 7½" Diameter Weight Capacity.............. ...

See the other products
WF Wells Inc
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.