Other cutting machines

Cutting speed: 2.5 m/s - 3.333 m/s

1.Improving the product quality and output capacity; 2.Reducing the labor cost; 3.Reduce the chance of contamination.

Cutting speed: 50,000, 20,000 mm/min
Overall length: 4,000 mm
Overall width: 2,500 mm

NCG2513LE with 4 high-speed main spindles is able to meet various processing requirements like nesting, shaping, grooving, top side boring. Max. speed along X & Y direction up to 50m/min, auto feed-in and out table improve the efficiency, ...

Cutting speed: 100,000, 20,000 mm/min
Overall length: 4,020 mm
Overall width: 2,270 mm

NCG2513E with 4 high-speed main spindles is able to meet various processing requirements like nesting, shaping, grooving, top side boring. Max. speed along X & Y direction up to 50m/min, auto feed-in and out table improve the efficiency, ...

High efficiency fume collection table Metal fume and dust come from CNC plasma cutting is always harmful to our healthy, how to efficiently collect these pollution is always a headache to customer. ProArc special design high efficiency ...

Main features • Cuts virtually all tubular-knitted fabric • Simple and exact scales make the machine easy to adjust and to operate • High capacity as a result of the two-band design • Provides extremely high precision of the cut ...

Semi-automatic slitting machine. Will slit any type of material on the roll (open knits, woven fabric, satin, polyester, some paper products, non-woven, etc.) Main features: • Can handle material on the roll to the max width of ...

Huge fabric savings. Compared to the traditional method of producing two rolls of open-knit fabric from tubular knit for producing of tape or binding. Main features: • Photocell edge alignment • Max Tubular fabric width l 00 cm ...

Coil Fed Laser Cutting Lines enables Our Customers' to Maximize their Production Capacity and Profitability, with Minimum waste and manpower needed. These Lines are Especially preferable to have high Production Capacity and fine Cutting ...

Coil Slitting Lines 600 Our CLT 600 Slitting Lines are Specially Designed to have Proper Slitting for Narrower width of Coils than Standard. As SACFORM, One of Our Strength is to Provide Special Solutions and Designs with Our Expertized ...

Cutting speed: 12,000 mm/min - 60,000 mm/min

Coil Slitting Line 1600 Our SLT-1600 series of Coil Slitting Line has a capacity with Thickness up to 0.2 - 4 mm, Width 1600 mm and Weight 20 Tons. With SACFORM’s R&D department's continuous Renovative and Developed design studies; ...

Winding and cutting of roll brushes out of endles strip brush The WAC 800, in combination with a strip brush machine, allows for external winding of a strip brush into roll segments with a selectable number of turns. The strength ...

for the production of foam paint rollers The foam block is put onto the conveyor belt bottom up. The bottom is split-off with the band saw. At the end of the machine the block are removed for further processing. The foam block can ...

Cutting hanks of wire manually of automatically Machine for cutting hanks of wire either manually or automatically, as well as for trimming brush segments from 1.2″ (30 mm) in diameter up to street sweeper rings of 3.3 ft (1.0 m) and ...

Weight: 130 kg

DESCRIPTION Cutting machine for all sorts of channels. TECHNICAL INFORMATION Movement for automatic change of measurement from touch screen or via USB stick or ethernet port Speed regulation of the blade motor from 400 to 1.800 ...

Automatic table for float and laminated glass shaped cutting, characterized by extreme strength, elegance, reliability and ease of use. Cutting Dimensions: 4.000 x 2.600 mm Max cutting speed: 180 m/min Glass thickness from 2 mm to ...

DESCRIPTION Breaking table for manual glass cutting with air cushion, breaking bars and pneumatic tilting. TECHNICAL INFORMATION Max cutting size: 3.210 x 2.100 mm or 3.210 x 2.500 mm (optional) Breaking bars n.: 2 Total Power: ...

Mini Slitting Machine uses extremely sharp rotary blades to cut large coil into strips of metal that have narrower width. Circular Blades or Knives can be moved to make sheet metal strips of varying widths. Mini Slitter is designed as ...

Slitting Line includes Hydraulic Coil Car, Hydraulic Uncoiler, Down Pressing Guiding Device, Slitting blades, Shearing Device, Recoiler,… Able to change Slitting Knife Set to perform slitting more sizes.

A Slitting & Cut to Length Machine can have multiple knives, is designed as coil slitter combining shearing machine. Used for slitting heavy gauge material, creates accurate slit widths and close tolerances. Optional: Combining ...

YS51-Frame Type Punch Press This machine is suitable for molding of automotive interior parts and also can be used for cutting foam packaging. Large working table and excellent forming ability are the main characters of this press. Based ...

Height: 64 cm
Weight: 22 kg

Abrasive disk cut-off machine. Dry additional cutting-off of ferrous metals for works Rapid clamping vice Mobile blade housing with automatic closing Tilting vice jaws from 0 to 45ø to the left and the right Shaft blocking pin for to ...

Height: 58 cm
Weight: 28 kg

Carbide blade cutting-off machine rapid and burr-free cutting of metal profiles without material heating and coolant Progressive start of the motor Rapid clamping vice Tilting vice jaws from 0 to 45° to the left and the right Depth stop 7-position ...

Overall length: 94 cm
Height: 157 cm
Weight: 130 kg

"45ø tilting head to the left and the right Rapid clamping vice. Burr-free double vice Mobile jaw to perform right 45° cut Protective cover of detachable saw mill Lubrication system of saw mill using a pump Drive through an oil-bath ...

CUTTING BLADE "R-50" Item No. 2940501000 "Loop R-50 for separating strong fabrics, cords an d ropes with dias of up to 35 mm"

HEAT CUTTING BLADE "HSO-N" Item No. 2940510000 "Loop HSO-N pointed loop, especially for light-wei ght fabrics and thin cords"

HEAT CUTTING BLADE "HS-S" Item No. 2940543000 "Loop HS-S for separating and edge-welding of larg e-sized tarpaulins, sailcloths and awning fabrics"

Weight: 1,650 kg

Special for metalloid material cutting as Graphite. Travels of work table - mm - 450x350 Max. cutting thickness - mm - 135 Max. cutting capacity - mm2/min. - 600 ( when cutting graphite material) Finest surface roughness ...

Cutting speed: 0 m/s - 0.6 m/s

The machine construction begins with the chassis by using the best quality steel materials to put together every kind of parts, which are manufactured with special weldings or self-bolts jamming, then, upon the chassis eight driving wheels ...

Combination of selected bandsaw and circular saws provide maximum output of finish products in small area. Min/ max diameter of log depends of type of machine [mm] 120-1500 Min/max lenght of log depends of type of machine [m] 1-16

SAWING LINE IS COMBINED WITH 2 different types of bandsaws, for optimum efficiency with different log diameters. On separated lines we can cut small to big diameter and each line is optimized for their orders. Crossaws and circulars ...

Automatic sawing line with multirip enables high productivity of cutted boards can be installed as part of bandsaw cutting line or standalone.

The scrap shear is a hydraulically driven automatic shear, which cuts the long scrap in short pieces. The scraps, after the chopping machine, drop down directly into an inclined conveyor that convey the scraps into a box that will be ...

Specifications - Semi-automatic vertical action twin headed mitre saw, - Right hand head fixed, the left hand head positioned automatically by servo motor on roller type linear guideways. - High performance heavy duty gear ...

The MK500 marking system is designed to deliver comprehensive marking services for cables, components, wires, terminal blocks, etc. with multi character marking ability. The unit can efficiently mark PC, POH, PK, PA+, PS and TX products.

The compact base CUT glass cutting machine is ideally suited for cutting straight lines and shapes out of flat glass. Its construction ensures maximum precision and minimal cutting tolerances, as well as the machine’s highest level of ...

It should be emphasized that it is extremely difficult to construct a 12 kW laser cutting machine. Especially when it comes to dynamic and efficient machines. This solution must be lightweight, ergonomic and ideal for optics. The last ...

Y travel: 1,300, 1,700, 2,200, 3,100 mm

Squeegee Cutter. Improved printing quality with a factory smooth edge. Rotating knife cutting only a 0,8 mm (1/32") thin strip of material Cooling lubricant guarantees precise cut of squeegee edge One cut for the perfect ...

Articulating Diamond Wire Saw Cuts Pipe and Cuts Costs Mactech Europe, a leading provider of subsea and offshore machining solutions, in association with Mactech Inc. are pleased to announce the launch of the Articulating Diamond Wire ...

Force: 996.4, 1,494.6, 498.2, 797.1 kN
Opening: 250 mm

Specifically designed to perform work involving deep-drawing, stamping, die-cutting, forming. It consists of an electro welded structure made solely of S355JR steel. They are stabilised and machined at the end of the structural welding ...

Force: 498.2, 797.1, 996.4, 1,494.6 kN
Opening: 250 mm

Specifically designed to perform work involving deep-drawing, stamping, die-cutting, forming. It consists of an electro welded structure made solely of S355JR steel. They are stabilised and machined at the end of the structural welding ...

Force: 797.1, 996.4, 1,494.6 kN
Opening: 450 mm

Specifically designed to perform work involving deep-drawing, stamping, die-cutting, forming for medium and high volumes. It consists of an electro welded structure made solely of S355JR steel. They are stabilised and machined at the ...