Drill bits, reamers

224 companies | 1607 industrial products

Companies per page

30 products Sandvik Coromant
new Sandvik Coromant ø 66.7 - 165.1 mm | CoroDrill 801
indexable insert drill bit for deep hole drilling ø 66.7 - 165.1 mm | CoroDrill 801 Sandvik Coromant

​CoroDrill® 801 enables a secure drilling process in difficult to chip materials. With a rigid design and the latest insert and pad technology, it offers high process security...

new Sandvik Coromant ø 1 - 20 mm | CoroBore 824 XS
boring bar for small part machining ø 1 - 20 mm | CoroBore 824 XS Sandvik Coromant

Boring small-diameter holes even at long overhangs has never been easier. Sandvik Coromant is now expanding the fine boring offer with new boring concepts. CoroTurn XS boring bars and the exchangeable-head...

video Sandvik Coromant ø 10 - 600 mm | Silent Tools®
anti-vibration boring bar ø 10 - 600 mm | Silent Tools® Sandvik Coromant

Silent Tools dampened boring bars and adapters make it possible to maintain good productivity and close tolerances also for long tool overhangs beyond 3 x bar diameter. Silent Tools...

Sandvik Coromant ø 5 - 8 mm | CoroMill 326
chamfering tool for machine tool ø 5 - 8 mm | CoroMill 326 Sandvik Coromant

Versatile and cost efficient, this miniature milling cutter benefits from three cutting edges for internal threading and chamfering. Use it in small holes, down to 6 mm (0.236...

Sandvik Coromant ø 12 - 63 mm | CoroMill 495
chamfering tool for machine tool ø 12 - 63 mm | CoroMill 495 Sandvik Coromant

Most components require at least one chamfer operation. This makes frequent tool changes a potential problem, especially when machining small batches in different materials. With CoroMill 495®, the...

Sandvik Coromant ø 25 - 65 mm | CoroDrill 800
deep hole drilling tool ø 25 - 65 mm | CoroDrill 800 Sandvik Coromant

In deep hole machining, a combination of tool design and cutting fluid pressure is used to evacuate the chips out of the hole. Both the Single tube system and Ejector drill system can produce holes with...

4 products HILTI
HILTI TE-CX
hammer drill drill bit TE-CX HILTI

- New solid carbide head for less wear and more holes with the accuracy required for setting anchors - Thanks to its innovative solid carbide head featuring the...

HILTI TE-TX
hammer drill drill bit TE-TX HILTI

- Solid metal carbide head: Top performance and reliability,...

HILTI TE-YX
solid carbide drill bit for deep holes TE-YX HILTI

- Solid metal carbide head: Top performance and reliability,...

9 products HITACHI TOOL
new video HITACHI TOOL ø 0.1 - 12 mm
drill bit for hardened steel ø 0.1 - 12 mm HITACHI TOOL

Let us take care of drilling in hardened steel! Merits of drilling (direct drilling)...

video HITACHI TOOL ø 2 - 2.93 mm | WHNSB-TH
deep hole drilling tool ø 2 - 2.93 mm | WHNSB-TH HITACHI TOOL

* Completely non-step to ultra-deep (L/Dc=30)...

HITACHI TOOL NSB series
solid carbide drill bit for cast iron NSB series HITACHI TOOL

High-efficient machining of cast iron with long...

video HITACHI TOOL SD(S-DLC)
solid carbide drill bit for aluminum SD(S-DLC) HITACHI TOOL

Carbide Oil Hole Non Step Borer for Aluminium Special...

video HITACHI TOOL Step Borer S
deep hole drilling tool Step Borer S HITACHI TOOL

* New item for selected dealers. TH coating...

HITACHI TOOL Drill‐EMD
drilling tool Drill‐EMD HITACHI TOOL

The cutting rubbish is smoothly exhausted by adopting...

Sandvik Coromant USA CoroDrill®
drilling tool CoroDrill® Sandvik Coromant USA

Sandvik Coromant’s drilling programme offers a wide range of high performance drilling products. Regardless of the hole style - we can offer...

Sandvik Coromant USA CoroDrill®
deep hole drilling tool CoroDrill® Sandvik Coromant USA

The CoroDrill 805 makes it possible to drill deep holes without moving the workpiece to a dedicated deep hole drilling machine i.e. all operations can be completed in one set-up. Deep...

Sandvik Coromant USA CoroBore®
high-productivity boring tool CoroBore® Sandvik Coromant USA

A boring tool is usually a modular tool, consisting of a basic holder, adapter and a cutting unit in the form of a cartridge, slide or fine boring unit. A fine boring head holds a boring bar or cartridge....

Sandvik Coromant USA
reamer Sandvik Coromant USA

Reamer 830 - for finishing of through holes Sandvik Coromant now introduces a reaming tool programme as a complement to the high performance drill concept CoroDrill 880. The new reamer is of modular...

Sandvik Coromant USA ø 5 - 8 mm | CoroMill 326
chamfering tool for machine tool ø 5 - 8 mm | CoroMill 326 Sandvik Coromant USA

Versatile and cost efficient, this miniature milling cutter benefits from three cutting edges for internal threading and chamfering. Use it in small holes, down to 6 mm (0.236...

Sandvik Coromant USA
boring bar Sandvik Coromant USA

There are four shank sizes 12, 16, 20 and 25 mm available with seats for CoroTurn 107 and CoroTurn 111 inserts. Bars have...

2 products AMECA
video AMECA
drill bit AMECA

The...

AMECA AMECOIL
thread repair kit using wire thread insert AMECOIL AMECA

Used in all industrial sectors, the standard or self-locking AMECOIL® SR thread...

5 products CERATIZIT
new video CERATIZIT EcoCut
multi-function drilling tool EcoCut CERATIZIT

Advantages * Problem solver for insufficient tool storage * Less programming...

new CERATIZIT
solid carbide twist drill bit CERATIZIT

CERATIZIT now covers the entire supply chain in the field of the production of precision tools, from powder preparation, to rods and preforms, to a diverse and extensive range of finished solid carbide...

new CERATIZIT CTS
carbide boring bar CTS CERATIZIT

The new CTS grades for rods and molded parts offer a winning combination of toughness and heat resistance. CERATIZIT is also launching a programme of carbide rods with four coolant holes, thereby optimizing...

video CERATIZIT ProfilMaster
drill bit with internal coolant ProfilMaster CERATIZIT

Advantages * Reduction of tool changing times * Reduced pre-setting and set-up times * Less programming...

36 products KOMET GROUP
video KOMET GROUP ø 16.5 - 44.5 mm | KUB Pentron™
indexable insert drill bit ø 16.5 - 44.5 mm | KUB Pentron™ KOMET GROUP

The KOMET KUB Pentron® was developed for continuous solid drilling up to 5xD, even in extreme machining situations which were previously only possible in 3xD. This...

video KOMET GROUP ø 10 - 20.5 mm  | KUB K2™
indexable insert drill bit ø 10 - 20.5 mm | KUB K2™ KOMET GROUP

The new replaceable head drill KOMET KUB K2™ ensures simple and safe replacement of the double cutting, carbide drill heads, even in the machine. The replaceable head drill relies on the economy...

video KOMET GROUP ø 14 - 65 mm | KUB Quatron®
high-performance drill bit ø 14 - 65 mm | KUB Quatron® KOMET GROUP

With its square inserts with four cutting edges on internal and external inserts, KOMET KUB Quatron® guarantees maximum tool life, high stability and economy. Applications: * Drilling depths 2xD, 3xD...

KOMET GROUP ø 3 - 16 mm | KUB Drillmax™
high-performance carbide drilling tool ø 3 - 16 mm | KUB Drillmax™ KOMET GROUP

The new KUB DrillmaxTM high-performance solid carbide drills complete our range for drill diameters of 3 to 16 mm and length/diameter ratios of 5×D and 8×D for small diameter ranges. Optimised,...

KOMET GROUP ø 3 - 10 mm | KUB Drillmax XL
high-performance carbide drilling tool ø 3 - 10 mm | KUB Drillmax XL KOMET GROUP

With the new KOMET KUB® Drillmax XL, the expertise gained from developing many special solutions has been transferred to a standard tool range, which is available from stock for 20×D in diameters...

video KOMET GROUP ø 14 - 44 mm | KUB Trigon®
drilling tool for machine tool ø 14 - 44 mm | KUB Trigon® KOMET GROUP

Because of its wide range of geometries and coatings KOMET KUB Trigon® opens up a high degree of flexibility in production. Close bore tolerances up to H8 and an extremely good surface finish allow...

27 products OSG
OSG ø 2 - 20 mm | WD-2D, WD-4D series
carbide drilling tool ø 2 - 20 mm | WD-2D, WD-4D series OSG

WD Series of carbide drills; These WD-2D & WD-4D drills all-rounder...

video OSG ø 1 - 12 mm | Nexus™
HSS drill bit ø 1 - 12 mm | Nexus™ OSG

New generation HSSE drill ideal for Stainless Steel...

video OSG ø 1.6 - 12 mm | TDXL series
extra length drill bit ø 1.6 - 12 mm | TDXL series OSG

HSS Extra long drills (without coolant...

OSG ø 3 - 12 mm | WDW series
solid carbide double-lip drill bit ø 3 - 12 mm | WDW series OSG

A good example in carbon steel. After the competitors product drilled 2,500 holes, the tool reached its usable limit due to loss of the cutting...

video OSG ø 5 - 18 mm | TRS-HO series
carbide drilling tool ø 5 - 18 mm | TRS-HO series OSG

High efficient processing of steel &...

Mikron Machining Technology ø 0.4 - 6 mm | CrazyDrill Steel™
high-performance drill bit ø 0.4 - 6 mm | CrazyDrill Steel™ Mikron Machining Technology

Under the CrazyDrill Steel brand, this high performance small drill offers truly spectacular drilling results. Even at high drilling speeds, the finished holes are outstanding! Impressive...

Mikron Machining Technology ø 0.4 - 3 mm | CrazyDrill Alu™
high-performance drill bit for aluminum ø 0.4 - 3 mm | CrazyDrill Alu™ Mikron Machining Technology

This CrazyDrill for aluminum die-castings and wrought alloys has achieved exceptional results. The main features: Faster drilling speeds Higher drill accuracy...

Mikron Machining Technology ø 0.4 - 6 mm | CrazyDrill Pilot™
centre drill bit ø 0.4 - 6 mm | CrazyDrill Pilot™ Mikron Machining Technology

With the CrazyDrill Pilot, centering and drilling of a pilot hole up to 2 x Ø is carried out in one single operation, thereby guaranteeing tight tolerance for the follow-up drill process....

video Mikron Machining Technology ø 0.4 - 6 mm | CrazyDrill Crosspilot™
high-performance drill bit ø 0.4 - 6 mm | CrazyDrill Crosspilot™ Mikron Machining Technology

Mikron has developed a pilot drill for inclined surfaces, which in many instances provides a perfect pilot hole for subsequent drilling at an angle. Centering or direct finish drilling; this does not...

Mikron Machining Technology ø 0.75 - 6 mm | CrazyDrill Cool™
drill bit with internal coolant ø 0.75 - 6 mm | CrazyDrill Cool™ Mikron Machining Technology

CrazyDrill Cool is used for all applications requiring deep, accurately drilled holes. In order to cover the entire spectrum from non-ferrous metal to heat-treated steel, it is available either with a...

video Mikron Machining Technology Ø 1 - 6 mm | CrazyDrill Cool XL™
drill bit with internal coolant Ø 1 - 6 mm | CrazyDrill Cool XL™ Mikron Machining Technology

With CrazyDrill Cool XL, Mikron Tool has developed a brand new deep hole drilling line for depths up to 40 x Ø and in a diameter range from 1.0 to 6.0mm (.04" - .24"). Due to its...

new video Ingersoll Cutting Tools T-Mini
boring bar for small part machining T-Mini Ingersoll Cutting Tools

Features and Benefits New range of positive, small IC turning inserts. Minimum...

new video Ingersoll Cutting Tools ø  14.3 - 50.8 mm | Quad-Twist
indexable drill bit ø 14.3 - 50.8 mm | Quad-Twist Ingersoll Cutting Tools

4 edge indexable drill. Excellent performance in gummy materials. Diameters...

video Ingersoll Cutting Tools ø 7 - 25.9 mm | Gold-Twist
drill bit ø 7 - 25.9 mm | Gold-Twist Ingersoll Cutting Tools

NEW GEOMETRIES! M Geometry (TMA Series) For Stainless Steel & High Temp Alloys (Available now!) K...

video Ingersoll Cutting Tools PBS-FC
high-precision fine boring tool PBS-FC Ingersoll Cutting Tools

Eliminates the gap (.125) typically found with standard...

video Ingersoll Cutting Tools PBS-TRD
finishing boring tool PBS-TRD Ingersoll Cutting Tools

Allows both roughing and high precision finishing with one...

18 products WALTER
video WALTER B4212, B4213, B4214, B4215
indexable insert drill bit B4212, B4213, B4214, B4215 WALTER

Walter provides its customers with yet another boost in productivity through the introduction of the two new drills from the Xtra-tec® series. The Xtra-tec® Insert drill with two four-edged indexable...

WALTER B4012C
indexable drill bit B4012C WALTER

No reworking necessary - high surface finish thanks to new precision geometry - low hole tolerances (H8) and accurate cylindrical holes due to self-centering and margins Can...

WALTER B3220
high-productivity boring tool B3220 WALTER

All materials can be machined with our boring tools and indexable inserts. The boring tools B 3220 Walter Boring Medium and Maxi are characterised by their easy handling, wide range of application...

video WALTER B4035
boring tool B4035 WALTER

Precision boring: Walter Precision DIGITAL The new precision boring tool B 4035 with its electronic position measuring system makes no compromise in terms of accuracy. Setting errors are avoided...

WALTER X-treme
solid carbide double-lip drill bit X-treme WALTER

The new solid carbide drill Walter Titex X·treme PLUS is an innovative masterpiece and it sets new standards. This high-tech tool has a unique multifunctional double coating for extremely...

video WALTER XD
high-productivity solid carbide micro drill bit XD WALTER

XD technology for small diameters; up to 600% higher productivity compared...

2 products CERAMTEC
CERAMTEC
indexable boring tool CERAMTEC

CeramTecs tools designed for boring cast iron workpieces can be fitted with SPK® mixed ceramics, CBN, oxide ceramics, silicon nitride ceramics, cermets and coated versions. Boring...

CERAMTEC
simple rolling tool CERAMTEC

CBN, SPK® mixed ceramics and various coated cutting materials from CeramTec with matching tool systems are available...

9 products HEULE
new video HEULE ø 6.5 - 21 mm | BSF
automatic back spot facing tool ø 6.5 - 21 mm | BSF HEULE

The surprisingly simple BSF tool concept allows back spotfacing or back counterboring in one operation without turning the workpiece. The productive efficiency is distinguished by its simplicity and high...

video HEULE ø 2 - 35 mm | SNAP
chamfering tool for machine tool ø 2 - 35 mm | SNAP HEULE

Economic front and back chamfering in One Operation, with very easy blade changes. The SNAP tool is an efficient front and back chamfering tool that is easy...

video HEULE ø 4 - 100 mm | GH-S
chamfering tool for machine tool ø 4 - 100 mm | GH-S HEULE

The double bladed GH-S tool allows for front and back chamfering of discontinuous bore edges without requiring the work piece to be turned or the spindle to be stopped. GH-S deburrs the bore edges and...

video HEULE ø 4 - 46 mm | DEFA
chamfering tool for machine tool ø 4 - 46 mm | DEFA HEULE

The double bladed DEFA chamfering tool creates predefined front and back chamfers in a single operation without stopping or reversing the spindle. The chamfer diameter can be adjusted on the tool. The...

video HEULE ø 6 - 49 mm | SOLO
counterbore ø 6 - 49 mm | SOLO HEULE

The SOLO tool allows for production of front and back countersinks and back spotfacing of through-holes with positive control in One Operation without requiring the work piece to be turned. The blade...

video HEULE ø 8 - 80 mm | GH-Z/E
counterbore ø 8 - 80 mm | GH-Z/E HEULE

The GH-Z/E tool is a twin bladed front and back counterboring tool that produces accurate back spotfaces, large countersinks and precision forms. The two blades of the tool are radially extended and retracted...

20 products Kennametal
2 products Paul Horn
video Paul Horn ø 12 - 15.9 mm | DD series
solid carbide twist drill bit ø 12 - 15.9 mm | DD series Paul Horn

Exchangeable head drill bit system from diameter 12...

video Paul Horn ø 11.9 - 100.6 mm | DR series
reamer ø 11.9 - 100.6 mm | DR series Paul Horn

Reaming tools for bore superfinishing of * steel, * cast...

10 products SGS
video SGS Hi-PerCarb®
high-performance carbide drilling tool Hi-PerCarb® SGS

The SGS Hi-Per Carb drill is designed to provide absolute accuracy and stability in the most challenging applications. The double margin design is absolutely...

video SGS ICE-Carb®
drill bit with internal coolant ICE-Carb® SGS

The SGS ICe-Carb drill is designed to provide absolute accuracy and stability in the most challenging applications. The engineered...

SGS ø 3/32
drilling tool for composite materials ø 3/32" - 1/2" | 120 series SGS

This all new 8 Facet Double Angle Hi-Per Carb series drill offers application benefits beyond that of other high performance drills in its category. Each feature of this 8 facet design was engineered...

SGS ø 0.7 - 12 mm
solid carbide double-lip drill bit ø 0.7 - 12 mm SGS

Hay limas rotativas y depuse hay limas rotativas de SGS. SGS Tool Company es el líder mundial...

SGS ø 0.5 - 16 mm, DIN 6539
solid carbide double-lip drill bit ø 0.5 - 16 mm, DIN 6539 SGS

SGS Solid Carbide Drills feature special geometry and other enhancements that...

SGS ø 1 - 12 mm
solid carbide single-lip drill bit ø 1 - 12 mm SGS

This high strength design is ideal for hard materials and extremely abrasive materials....

new KAISER Precision Tooling Ltd.
anti-vibration boring bar KAISER Precision Tooling Ltd.

The Smart Damper is a solution in extended-reach arbor technology....

new KAISER Precision Tooling Ltd. ø 22 - 62 mm
chamfering tool for machine tool ø 22 - 62 mm KAISER Precision Tooling Ltd.

The C-Cutter Mini is an ultra high feed chamfering mill with a compact design. This design reduces...

KAISER Precision Tooling Ltd.
boring bar KAISER Precision Tooling Ltd.

A carbide bar with an optimized length and with the biggest possible diameter offers the highest rigidity and therefore the...

KAISER Precision Tooling Ltd. ø 16 - 30 mm | 337 series
indexable insert drill bit ø 16 - 30 mm | 337 series KAISER Precision Tooling Ltd.

The new generation of the KAISER insert drills is made with straight flutes. This design guarantees a short distance for chip evacuation and a high radial and torsional rigidity. The CKB/CKS connection...

KAISER Precision Tooling Ltd. ø 31 - 74 mm | 336 series
indexable insert drill bit ø 31 - 74 mm | 336 series KAISER Precision Tooling Ltd.

Insert drills in two length graduations (2xD and 3xD) with CKB/CKS tool connections. The CK-connection provides versatile clamping...

KAISER Precision Tooling Ltd. ø 5 - 100 mm
chamfering tool for machine tool ø 5 - 100 mm KAISER Precision Tooling Ltd.

Chamfering mill with indexable inserts for efficient and...

16 products ISCAR Tools
video ISCAR Tools ISCARDRILL
solid carbide double-lip drill bit ISCARDRILL ISCAR Tools

Features • Range of 3-20 mm in length to diameter ratio of 3xD &5xD. • Right-hand cut with and without internal coolant nozzles. • IC08 submicron substrate. • Most advanced TiAlN...

new video ISCAR Tools SUMOCHAM
carbide drilling tool SUMOCHAM ISCAR Tools

ISCAR’s SUMOCHAM drill family is the next evolution of the very successful CHAMDRILL and CHAMDRILLJET families. The new family has similar features, with improved head and pocket design, no setup time,...

new video ISCAR Tools SUMO UNICHAM
modular drill bit SUMO UNICHAM ISCAR Tools

ISCAR is introducing the SUMO UNICHAM, new drills without a flange, for chamfering operations by using the standard CHAMRING modular chamfering drill holders. The SUMO UNICHAM combines the advantages...

ISCAR Tools CHAMDRILL
drilling and chamfering tool CHAMDRILL ISCAR Tools

This revolutionary drill features ISCAR’s unique "quick change" system. Precise carbide drill heads...

video ISCAR Tools CHAMDRILL
solid carbide twist drill bit CHAMDRILL ISCAR Tools

This revolutionary drill features ISCAR’s unique "quick change" system. Precise carbide drill heads...

video ISCAR Tools UNICHAMDRILL
drill bit with internal coolant UNICHAMDRILL ISCAR Tools

ISCAR has introduced a new family designated UNICHAMDRILL. This family follows the familiar CHAMDRILL but is produced without a flange (round cylindrical body). The...

18 products SECO TOOLS
video SECO TOOLS Crownloc®
drilling tool Crownloc® SECO TOOLS

Crownloc® is our high quality range of exchangeable tip drills, designed to offer high quality holes at a lower cost. Crownloc® features a coated drill body, a large range of optimised tip...

video SECO TOOLS 12 - 19.99 mm | Crownloc® Plus
drilling tool 12 - 19.99 mm | Crownloc® Plus SECO TOOLS

Crownloc® Plus is a new generation of Seco drills with exchangeable crowns. Featuring new geometry, coating and locking interface, Crownloc Plus improves chip evacuation and wear resistance...

video SECO TOOLS Perfomax®
indexable insert drill bit Perfomax® SECO TOOLS

Perfomax® is Seco®’s range of indexable insert drills. The strong, square inserts offer four cutting edges per insert and the possibility to use our most modern insert grades. The high drill body stability,...

video SECO TOOLS ø 2 - 20 mm | Feedmax™
solid carbide double-lip drill bit ø 2 - 20 mm | Feedmax™ SECO TOOLS

Seco Feedmax™ is our latest generation of high performance solid carbide drills. They offer a unique combination of state-of-the-art carbide, coating and geometry technology. High productivity...

video SECO TOOLS Ø 0.1 – 2 mm | Feedmax™ SD22, SD26
solid carbide micro drill bit Ø 0.1 – 2 mm | Feedmax™ SD22, SD26 SECO TOOLS

SD22 and SD26 are a new range of small, highly productive solid carbide Seco Feedmax SD22micro drills designed for applications in the automotive and medical industries, along...

video SECO TOOLS ø 4 - 10 mm | Feedmax™ SD230A
solid carbide double-lip drill bit ø 4 - 10 mm | Feedmax™ SD230A SECO TOOLS

In order to meet the demands from our customers Seco is now launching long Seco Feedmax SD230Asolid carbide drills (30xD) as a complementary product to our existing range of 16xD drills. In addition...

1 2 3 4 5 6 7 8 9 10
Filter by :
Related categories
Search by product
Search by manufacturer
Search by catalog
With DirectIndustry you can find a nearby distributor, contact a manufacturer for an estimate or a price, or examine product characteristics and specifications.