Drill bits, reamers

228 companies | 1666 products
Filters
  • What’s new?
    Submit
indexable insert drill bit / deep hole - ø 66.7 - 165.1 mm | CoroDrill 801

Corodrill is an equipment that is useful for secure drilling in materials that are difficult to undergo chipping. The device has a rigid design and has implemented...

anti-vibration boring bar - ø 10 - 600 mm | Silent Tools®

It is possible to maintain good productivity and close tolerances with the Silent Tools dampened boring bars and adapters. This also applies to long tool overhangs over a 3 x bar diameter. Up to...

chamfering tool for machine tool - ø 5 - 8 mm | CoroMill 326

The CoroMill 326 is an adaptable and economic miniature milling cutter that features three cutting edges allowing for internal threading and chamfering. This is the ideal unit to use for small...

chamfering tool for machine tool - ø 12 - 63 mm | CoroMill 495

The SANDVIK COROMANT CoroMill 495 versatile chamfer cutter offers various types of chamfering of holes and along edges in multiple materials and for typical chamfering, back chamfering,...

deep hole drilling tool - ø 25 - 65 mm | CoroDrill 800

The CoroDrill® 800 is designed with a variety of grades that is capable of machining different materials using precise chip control from its central insert L-geometry technology. It...

{{productDetail[14460]}}
hammer drill drill bit - TE-CX

The TE-CX drill bit features a new solid carbide head that is able to drill through steel rebars without encountering difficulty, and the bit has greater precision for setting...

hammer drill drill bit - TE-TX

This highly durable and innovative drill bit is made with a sturdy metal carbide...

monobloc drill bit / carbide / deep hole - TE-YX

The head of TE - YX is made of solid metal carbide which makes the...

{{productDetail[18858]}}
hardened steel drill bit - ø 0.1 - 12 mm

This can be used for drilling hardened steel. It provides so many benefits of drilling materials that...

deep hole drilling tool - ø 2 - 2.93 mm | WHNSB-TH

Manufactured by Hitachi, the carbide oil hole non step borer series features a full non-step...

monobloc drill bit / carbide / for cast iron - NSB series

The high efficient machining of cast iron is possible with a long tool life. This product...

monobloc drill bit / carbide / for aluminum - SD(S-DLC)

The SD(S-DLC) coated Carbide Oil Hole Non Step Borer for...

deep hole drilling tool - Step Borer S

The Epoch Micro Step Borer S features a standardized chip removal stopper with high level...

{{productDetail[33369]}}
drilling tool - CoroDrill®

The CoroDrill 880 from Sandvik is an indexable insert drill specifically used for general drilling, drilling of angled, curved, concave and convex...

deep hole drilling tool - CoroDrill®

Sandvik Coromant is a top notch deep hole drilling system producer. Among its long line of deep drilling solutions is the CoroDrill 805.

The...

boring tool - CoroBore®

CoroBore 820 is a boring tool introduced by Sandvik Coromant. It is actually a modular device engineered for an inside coolant supply with a 35 - 260...

boring tool - CoroBore®

High performance drill concept CoroDrill 880 gets a compliment in the form of Reamer 830. Reamer is a reaming tool that delivers high surface finish. With its modular design and a replaceable cutting head, it is quite...

chamfering tool for machine tool - ø 5 - 8 mm | CoroMill 326

The miniature milling cutters also benefit from three cutting edges for internal chamfering and threading. In addition to this, you can use them with small...

{{productDetail[35541]}}
thread milling cutter / with internal coolant - TC610, TC611

Walter Prototyp Setting new standards for thread mills with the Supreme line.

Features...

precision drill bit / deep hole - Titex XD

Walter Titex XD drilling technology: High-precision
in one operation down to 70 x Dc.

Features and advantages:

Up...

boring tool - B4031.C

The B4031.C single edge boring tool has a highly flexible Capto interface, making the tool ideal for high precision applications such as milling, drilling, precision...

indexable insert drill bit - Xtra▪tec® Insert

The Walter Xtra▪tec® Insert drill is fitted with two indexable inserts each of which feature four cutting edges. This tool is suitable for achieving...

indexing drill bit - Xtra▪tec® Point

The Xtra▪tec® Point drill is equipped with an indexable insert capable of positive locking...

{{productDetail[5602]}}
wood-burning drill bit - 0650610165

The Würth auger drill bits are designed to deliver precision and efficiency...

{{productDetail[18878]}}
drill bit -

This AMECA hand-operated installation tool drilling bit is the ideal unit to use with applications...

repair kit thread - AMECOIL

The AMECOIL® SR repair feature parts made out of stainless steel variants, phosphorous bronze,...

{{productDetail[34843]}}
monobloc drill bit / carbide / for aluminum / for steel - ø 1 - 12 mm | W11xx series

Specialists for depth

Quick processing times
The new drill geometries allow for process security...

insert drilling tool / for non-ferrous metals / for cast iron / for steel - 15 m/min | EcoCut

EcoCut is a multifunctional tool that allows drilling and turning with the use of a single device. It solves problems of insufficient...

monobloc drilling tool / tungsten carbide / for non-ferrous metals / for aluminum - ø 4 - 8 mm | EcoCut Mini

1 tool for 4 machining operations - Ø-range from 4 to 8 mm

Save costs and time
EcoCut Mini is suitable for the machining of internal and external...

insert drilling tool / with 1 tooth / with internal coolant / thread - 110 m/min | ProfileMaster

In competitive market multi-functioning tools are in demand. Ceretizit's profile master revolutionizes machining process...

insert drill bit / for stainless steel / for steel / high feed - 200 m/min | MaxiDrill 900

Our high-performance tool for solid drilling

Maximum productivity
The tool body defies the tremendous stress of high-feed-drilling and its stable construction offers perfect drilling quality even with high cutting parameters....

{{productDetail[24084]}}
boring tool - ERPLUS

The ERplus by Hoffmann Group is a precise boring system. It is a newly manufactured...

modular drill bit - HIPER-DRILL

The Hiper-Drill from Garant is a head drill that offers high performance and precision. It also provides...

modular drill bit - HIPER-DRILL

The product has a version with spiral fluted ground from solid and relief ground. It's designed to suit 70m/min vc cutting speed in aluminium with maximum of 350N/mm2 of long chipping...

modular drill bit - HIPER-DRILL

This ground jobber drill from Hoffman is engineered with great concentricity and pitch accuracy ground point. It produces a smooth finish and is perfect for production drilling....

modular drill bit - HIPER-DRILL

This model arrives with a pointed drilling point so prior drilling is not required. Conically boosting cutting corners and thoroughly free ground circumference for a matching cut. With scale in the flutes, and three drive flats in the...

{{productDetail[40734]}}
indexable insert drill bit - ø 16.5 - 44.5 mm | KUB Pentron™

KOMET KUB Pentron® is created for consistent solid drilling up to 5xD even in the midst of paramount machining implementations. It supplies up to 20% more cutting and...

indexable insert drill bit - ø 10 - 20.5 mm  | KUB K2™

Safe and effective replacement of double cutting, carbide drill heads, even those found in machines, is simplified using the KOMET KUB K2™ replaceable head drill.

This device offers...

high-performance drill bit - ø 14 - 65 mm | KUB Quatron®

The KUB Quatron® is a solid drilling tool manufactured by Komet. Its key features include drilling depths of 2xD, 3xD and 4xD, a diameter ranging between 14.0 to 65.0 mm, higher...

carbide drilling tool / high-performance - ø 3 - 16 mm | KUB Drillmax™

The KUB DrillmaxTM high-performance solid carbide drills is part of the 3 to 16mm and length/diameter ratios of 5×D and 8×D for small diameter ranges....

carbide drilling tool / high-performance - ø 3 - 10 mm | KUB Drillmax XL

KOMET KUB® Drillmax XL is a high performance drill used for deep holes. The standard tool range is available from 3.0 to 10.0mm diameter for the 20×D range and 3.0 to 8.0mm for the 30×D....

{{productDetail[7054]}}
carbide drilling tool - ø 2 - 20 mm | WD-2D, WD-4D series

WD Series of carbide drills, especially WD-2D & WD-4D drills are noted for their versatility and...

high-speed steel drill bit / HSS - ø 1 - 12 mm | Nexus™

The HSS Nexus Drill is a series of drills manufactured by OSG. It is specifically created for use...

extra length drill bit - ø 1.6 - 12 mm | TDXL series

The TDXL series are top of the line designs by Toko-ton Spirit. This product features...

monobloc drill bit / carbide / 2 lips - ø 3 - 12 mm | WDW series

This product of OSG have achieved its quota because of the cutting edge prompted by the fault in the margin. The WDS-3D...

carbide drilling tool - ø 5 - 18 mm | TRS-HO series

The OSG TRS-HO-3D/-5D/-10D are high precision carbide drills with equipped with...

{{productDetail[17355]}}
high-performance drill bit - ø 0.4 - 6 mm | CrazyDrill Steel™

Under the CrazyDrill Steel brand, this small drill with high performance from Mikron offers truly amazing drilling results with outstanding finished holes even at high drilling speeds. Impressive...

aluminum drill bit / high-performance - ø 0.4 - 3 mm | CrazyDrill Alu™

This CrazyDrill for aluminum die-castings and wrought alloys has achieved exceptional results.

The main features:

Faster drilling speeds
Higher drill...

center drill bit - ø 0.4 - 6 mm | CrazyDrill Pilot™

The CrazyDrill Pilot from Mikron is mainly used for centering and drilling of pilot holes up to 2 x Ø in one operation that ensures high tolerance. Also, it...

high-performance drill bit - ø 0.4 - 6 mm | CrazyDrill Crosspilot™

MIKRON CrazyDrill CrossPilot represents a high-performance, cost-effective drill that solves various problems that occur during difficult angled drilling tasks, in applications like transfer...

drill bit with internal coolant - ø 0.75 - 6 mm | CrazyDrill Cool™

When precision, depth and accuracy are major concerns for applications, operators use CrazyDrill Cool. The device comes in both coated or non-coated version and is highly useful in non-ferrous metal to heat-treated...

{{productDetail[5710]}}
stainless steel drilling tool / for titanium / high-productivity / shrink fit - 12 - 19.99 mm | Crownloc® Plus

The Crownloc Plus, manufactured by Seco, is a drilling tool that features a design characterized by new geometry, coating and locking interface with its...

diamond-coated drilling tool / for CFRP / for composites / finish - Feedmax™ -C1, C2

The Feedmax™-C1 & -C2 are SECO'S specialized new drills both of which are diamond-coated with a micro grain substrate making them highly resistant to wear, contributing...

monobloc drilling tool / PCD / for composites - Feedmax™

The PCD Drill is a composite machining drill manufactured by Feedmax™. Manufactured with a 120° drill point design, it offers a versatile operation. Tailored tools may...

stainless steel drilling tool / for steel / for cast iron / for hardened steel - Crownloc®

SECO Crownloc® eliminates large stock of drills than braised drills. A cost-effective solution since it produces more holes and reduce downtimes with its easy and fast...

indexable insert drill bit / for cast iron / high-productivity / deep hole - Perfomax®

The Perfomax® from Seco has been equipped with high quality inserts and drills that has a long tool life. It is engineered with a stable, low friction-coated drill body, that enables it to operate...

{{productDetail[5699]}}
monobloc drill bit / carbide / 2 lips - SOLIDDRILL

Characteristics of Solid Carbide Drills include array length of 3 mm to 20 mm to three times and five times of the diameter ratio, right-hand cut can be done with and with no interior coolant needles and substrate of IC08 submicron. They offer best fissure quality,...

carbide drilling tool - SUMOCHAM

ISCAR's SUMOCHAM drill family is next evolution providing excellent success for CHAMDRILL and CHAMDRILLJET families. The new release comes with similar features along with improved pocket and head design,...

modular drill bit - SUMO UNICHAM

The Sumo UniCham, manufactured by Iscar, is an indexable head that features a drill that does not include a flange. The device operates through the modular Chamring chamfering...

deep hole drilling tool - ø 12 - 25 mm | SUMOGUN

The all new SUMOGUN series manufactured by ISCAR is a line of products designed for drilling with a drilling range capacity of 12 to 25 mm for a total length of 1000 mm. Removing the drill...

beveling machines drilling tool - CHAMDRILL

The CHAMDRILL is a revolutionary drill that highlights ISCAR's reliable "quick change"...

{{productDetail[5692]}}
beveling machines drilling tool - CHAMDRILL

The SPK® series of boring systems is specifically designed for boring operations with cast iron (either gray and ductile types) work pieces. The tool may be fitted...

beveling machines drilling tool - CHAMDRILL

The CeramTec range of CBN, SPK® mixed ceramics and various coated cutting materials complete with matching tool systems are ideal...

{{productDetail[5715]}}
monobloc drill bit / carbide - GOdrill series

The KC7325 is a solid carbide drill manufactured by Kennametal. Its key features include...

monobloc drill bit / carbide / deep hole - B269, B274Z series

The model B269 HP Solid carbide deep-hole drills with 12x drilling depth are exceptionally...

{{productDetail[7354]}}
carbide drill bit / high-output - ø 12 - 15.9 mm | DD series

The Drilling System DD features a unique system that supports interchangeable...

reamer - ø 11.9 - 100.6 mm | DR series

The PH HORN PH offers a wide range of Reaming Tools for bore finishing applications....

{{productDetail[16174]}}
carbide drilling tool / high-performance - Hi-PerCarb®

The SGS Hi-Per Carb drill from SGS is engineered with External Coolant 3xD and 5xD, and a double margin to ensure high precision...

drill bit with internal coolant - ICE-Carb®

The SGS Ice-Carb drilling tips are specifically engineered to cater reliability and functionality in difficult...

composite drilling tool - ø 3/32

SGS Hi-Per Carb composite drill has a double angle, and it provides many more advantages in comparison to other drills within its class.

It has a 8 facet design. Every feature of the drill has been designed to solve the most common challenges faced during composite drilling. The...

monobloc drill bit / carbide / 2 lips - ø 0.7 - 12 mm

Designed for drilling effectively in a broad variety of uses and materials, the SGS general purpose...

monobloc drill bit / carbide / 2 lips - ø 0.5 - 16 mm, DIN 6539

SGS Solid Carbide Drills combine unique geometry and other improvements that offer...

{{productDetail[9243]}}
monobloc drill bit / carbide / 2 lips - ø 0.5 - 16 mm, DIN 6539

A carbide bar with an optimized length and with the biggest possible diameter offers...

monobloc drill bit / carbide / 2 lips - ø 0.5 - 16 mm, DIN 6539

This anti-vibration boring bar is developed by KAISER Precision Tooling Ltd. It is...

boring head finishing - ø 2 - 54 mm | 112 EWD series

The precision boring head KAISER EWD 2-54, with digital display...

boring head finishing - ø 0.4 - 152 mm | 112 EWN series

Short and compact boring head with an extremely rigid construction
Ground and play-free fitted micrometer spindle...

{{productDetail[17788]}}
small parts machining bar / boring - T-Mini

Ingersoll T-Mini are indexable boring bars suitable for machining of small parts. It features a latest range of...

drill bit - ø 7 - 25.9 mm | Gold-Twist

The Gold Twist is a series of replaceable tipped drills manufactured by Ingersoll. It is available in a wide variety...

indexing drill bit - ø  14.3 - 50.8 mm | Quad-Twist

For superior gummy materials performance, this four-edge indexable drill is the ideal machine. It can...

boring tool high-accuracy / fine - PBS-FC

New face contact arbors reduce the gap usually found...

boring tool - PBS-TRD

The Ingersoll TRD double bit system is a dynamic cutting tool end that is capable...

{{productDetail[17869]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation