Milling tools

153 companies | 2413 products

Threads in steel are milled for reasons relating to
repeat accuracy and quality requirements. However,
this procedure requires more time than conventional
procedures such as tapping and forming, especially for
small diameters of up...

The new milling cutter range from KOMET follows on the success of the tried and tested KUB Quatron solid drill range. The innovative Quatron indexable insert was developed from solid drilling technology and this experience...

If you would like to have a trustworthy step and face crushing of cast iron substances, then hi.aeQ arbor face milling cutter is an ideal choice as it is innovative in design and offers excellent performance. It features many high teeth and low cutting forces. The Q80 divergent indexable...

The Solid Carbide Milling Cutter, engineered by Komet group, is suitable for varieties of applications...

{{productDetail[7054]}}

The Walter Blaxx™ F5138 porcupine cutter is a shoulder milling tool that has exceptionally enhanced reliability due to its solid structure as...

Walter Prototyp Setting new standards for thread mills with the Supreme line.

Features...

Walter Prototyp Top performance with the new
Supreme line.

Features and advantages:

A...

The Walter Prototyp TMC is a carbide thread mill combining both a thread milling and countersinking tool that has a concentricity of less than 10 μm.

It...

The Walter Prototype TMD solid carbide thread milling cutter is ideal for cutting internal threads as well as drilling, countersinking and milling the threads in one operation. It is best suited for use in short-chipping aluminum and cast iron materials....

{{productDetail[5602]}}

The CrazyMill Cool is the only one of its kind with a diameter range of 0,3 to 6 mm or .0118" to .236". Perfect flushing and cooling is attained with integrated...

Mikron's broad range of solid carbide tools are optimized for chip removal applications, and are tailor fit to specific customer requirements for their custom applications. These tools promote...

{{productDetail[5710]}}

The OSG offers this thread milling cutter series Vol.7 that has been developed for utilization with...

Added with new coating, the WXL Series is the latest addition and competing...

The CBN series of the OSG has overpoweringly tools for large end mills requirements....

The NEO series contains end mills that hinder the breaking to perform well. With this...

The robust and durable Exocarb Aero Rougher is a TiALN Coated, wear-resistant...

{{productDetail[17355]}}

Milling Cutter Series with a Variety of setting Angles for universal Roughing and Semi-Finishing
SPK®...

Milling Tool with highly positive octagon Inserts for Machining thin-walled and fragile Components

SPK®...

Milling Tool for economical, high-performance Face Milling of Cast...

High-performance Face Milling System for perfect Fine Finishing Surfaces

The...

{{productDetail[5715]}}

CERATIZIT provides the complete supply chain for precision tool production, including powder preparation, rods, and preforms. It also offers a wide and versatile range of finished solid carbide equipments. Along with drills and milling cutters, it also provides...

1st choice for steel machining

High metal removal rates
Thanks to the optimised...

The specialists for stainless steel and heat resistant materials

Optimised machining operation as a result of high end tools
The geometries and grades...

Optimised for exotic materials

Reliable quality
The tool geometries are specifically adapted for the machining...

We specialise in producing cutting tools for very hard materials.

High-performing grades for hard materials
With an increase in...

{{productDetail[24084]}}
{{productDetail[7354]}}

Solid carbide end mills DC:

Thread milling part profile from M1,6
...

Solid carbide end mills DC:

Thread milling part profile from M1,6
...

Solid carbide end mills DC:

Thread milling part profile from M1,6
...

Disc cutters with indexable inserts type 314 screwed...

{{productDetail[16174]}}

The CoroMill 170 is mainly used for internal and external roughing of gears, also used for Slewing rings and Planetary gears with a module range of 12 to 22. It features...

The Coromant EH is an exchangeable-head system which includes a broad range of indexable milling cutters, integrated machine adaptors, solid carbide heads, boring heads and different shanks. The Coromant EH has a modular...

The Auto AF face milling cutter is used for finishing cast iron components, requiring excellent surface finishes in automotive operation like engine blocks and cylinder...

This fixed pocket face milling cutter has been designed specifically for use in square shoulder cast iron applications that require fine surfaces at...

The auto roughing extra close pitch face milling cutter is designed for use roughing and semi-finishing cast iron...

{{productDetail[14460]}}

The kind of insert has a type of low cutting force and a type of tough cutting edge.
New...

The kind of insert has a type of low cutting force and a type of tough cutting edge.
New coating...

Wall surface accuracy during shoulder milling has been improved. Exceptionally...

This is a tool helpful in achieving higher efficiency...

{{productDetail[33369]}}

New solid endmills have a special edge configuration for machining CFRP composite parts and honeycomb.
The increased popularity of composites in aerospace applications creates new challenges for metal cutting shops. One of these substances, Carbon Fiber Reinforced Plastic (CFRP), can be especially difficult to machine.

These materials...

The MILLSHRED P290 line features 90° serrated milling inserts. Provides reduced cutting forces and is extremely productive at high overhangs.

Features

...

The HELIDO S890 FSN features a screw clamping ability, and square shaped inserts S890 SNMU 1305 PN that has a repeatable cutting...

HELIPLUS is an extension of the HELI2000 family. The rigid and double screw-clamping method of the HELIPLUS insert features a high helix sharp cutting edge, which in turn provides FMR (Fast Metal Removal). HELIPLUS milling...

The HELITANG T465 is a product family with a tangentially clamped, 4 corner insert with a 65° approach angle.
The 65° cutting edge angle is a very efficient solution for high metal removal...

{{productDetail[5692]}}

The Garant 181100 is a shall end mill which features its class N fine toothing ability of 30° helix. For this...

The Shell End Mill by the Hoffmann Group is especially designed to create and provide a good quality performance for any related applications for the tool. It is made...

This is an HSS milling cutter by Garant that offers a unit designed for 28 m/min and 23 m/min cutting speed...

The Single Flute Slot Drill by the Hoffmann Group is specifically and especially designed to provide a high quality performance for any related fields. The slot drill has...

The End Milling Head is specifically designed to create a high quality performance....

{{productDetail[40734]}}

SGS Tool Company aims to deliver cutting tools at not just economical rates, but with high productivity too. These cutting tools will definitely produce remarkable...

The Multi-Carb High Performance Finishing End Mill incorporates a large number of flutes for stability and high feed finishing capabilities in applications where surface finish...

The Finishing and Semi-Finishing 5 Flute Variable Geometry End Mill is designed with enhanced...

The Ski-Carb® range of end mills are optimized for handling plastic, aluminum, and other non-ferrous materials, in...

The Power-Carb™ End Mills have the capacity to mold grade steels up to 65 HRc. These end mills are designed...

{{productDetail[9243]}}

The GOLD-MAX 4, with its high-speed and maximum pocket strength is used in titanium...

The Gold Max 4 FFIN is a finishing face mill manufactured by Ingersoll. Its key features...

The SERIES 3VJ5V in a thin slotter design features a high performing thin slider that offers...

There are numerous features and benefits that apply to the use of this advanced cutting tool. First of all, the cutter is available with diameters...

Benefits and features are as follows, a robust insert design, secure, strong insert clamping screw for demanding...

{{productDetail[17869]}}

Seco Tools gives you various sets of cutter bodies, inserts and attachments in the industry. It serves...

The Hexamill® R220.66-12 series of face milling inserts and cutters is specially designed for use in machining systems with at least ISO 50 and 25 H.P. taper...

This Seco's Quattromill makes reliable and precise milling application simple because...

Quattromill-AL is a cutter that comes equipped with PCD inserts, being especially designed for applications that require high performance when working with aluminum alloys, as well as other non-ferrous materials, including...

The highly flexible Double Octomill™ R220.48 face milling cutter functions as a roughing and finishing tool in one. It is designed to last long thanks...

{{productDetail[5699]}}

The cemented carbide burrs manufactured by Tyrolit, features a casting iron, a non ferrous...

{{productDetail[37270]}}

The CoroMill 245-18 is used for cutting and is capable of milling surfaces with perfect finish and is usually applied with wiper inserts....

CoroMill 390 endmill is noted for its exceptional performance. In fact, this device is...

When it comes to threading, it is essential to choose the correct tool and application...

The CoroMill 245 from Sandvik Coromant is a light-cutting face mill specifically used for removing...

The CoroMill 390 from Sandvik offers accurate performance in a class of its own and is...

{{productDetail[35541]}}

New generation solutions for high feed applications with greatest performance and reliability.

HIFEED PRO 200 is a new range of small diameter high feed tools, intended for very high productivity in modern...

The PNHX 1105 series is manufactured by Palbit, and is a face milling that has an optimized...

The PLUS 90945, SNHX 1206 Series is mainly used as high performance solution for face milling application. This series...

The Plus 91245 model is manufactured by Palbit, and is a milling tool that...

The TG PLUS 90390 is specifically designed and created to provide an excellent...

{{productDetail[40532]}}

SLOTWORX®
from S to L offers to you a complete ran-ge of square shoulder face milling- and slotting end mills for universal applications: roughing and finishing of steel,

aluminium, graphite, plastics as well as...

SLOTWORX®
from S to L offers to you a complete ran-ge of square shoulder face milling- and slotting end mills for universal applications: roughing and finishing of steel, aluminium, graphite, plastics as well as hardened materials and, in the meantime, for machining stainless...

{{productDetail[9204]}}


SKS high feed cutter | indexable endmill | insert cutter | milling cutter | high-feed milling

Features:

●...

2-flute flattened end mill | straight shank | long cutting edge
DP-2-EL Series

Features:

*...

4-flute end mill | flattened head | straight shank

Features:

* Cutting flutes: 4;

* Helix...

2-flute ball nose end mill with straight shank

Features:

* Cutting flutes: 2;

* Helix...

{{productDetail[122411]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation