|
|
|
|
|
|
The FAG Detector II is the ideal vibration analysis introductory device. The hand-held measuring instrument weighing approx. 450g is user-friendly and very easy to operate. And the best: the value for money is just unbeatable. The FAG Detector II is a vibration measuring device and a data collection device in one. Machine damage is detected early and remedied. This avoids unforeseen shutdowns as well as expensive consequential damage.
How exactly does the FAG Detector II work?
Vibration signals are detected via a sensor. The FAG Detector II calculates the RMS values (root-mean-square values) of vibration speed and acceleration (so-called characteristic values) from the vibration signals. The characteristic values are evaluated by means of a computer with the aid of the "Trendline" PC software.
Who is able to operate the Detector II?
Great, if you already have a basic knowledge on vibration analysis. But: You don't have to be an expert in order to operate the FAG Detector II. Even staff without knowledge in the area of vibration analysis can quickly learn how to handle the device. We offer training courses in which you achieve the knowledge neccessary.
Version Detector II
The device in version II has the following features:
- Filing up to 24 time signals by memory of 256Kb
- In memory of 1MB 114 time signals can be stored up
- Temperature measurements (from - 15 °C to 250 °C)
- Email button: If this button is hit data can be forwarded to a vibration analysis expert
- Calculation of frequency spectrums
|
|
|
|
|
|
PROsmart from ITT Industries encompasses the latest technology in condition monitoring to assure that your plant continuously runs at peak efficiency. It provides a cost-effective solution to maintaining uptime on all of your rotating equipment. PROsmart continuously monitors, analyzes (to pre-stated parameters) and annunciates an alarm when critical criteria is not met. By identifying, diagnosing, and sounding an alert to potential equipment problems before they have a chance to manifest into unexpected downtime or catastrophic failure, PROsmart helps to assure plant profitability.
PROsmart delivers benefits that go right to the bottom line.
Extends equipment life
Optimizes costly "walk arounds" by skilled personnel
Can help reduce overall equipment failures and the cost of downtime
Sends alerts prior to potential catastrophic process failures
Provides "state-of-the-art" predictive analysis
Consolidates data for equipment optimization
PROSmart is a self-powered device, or can be set up to use local power if it is available, that works 24/7 with alarm and alert capabilities. Individual computer formulas (algorithms) are created based on testing of the rotating equipment. These are used as the basis for evaluation and are stored on the PROsmart central computer.
|
|
SeTAC
THE MACHINE ON BOARD MONITORING
SeTAC is a triaxial intelligent vibration sensor that, installed onboard a machine, provides continuous monitoring, ensuring maximum reliability of the measurements taken.
With SeTAC it is possible to identify specific events (collisions, unbalances, overloads, wear of specific mechanical parts), distinguishing significant vibration from background noise by using filters that can be calibrated by the user. The user can set three digital alarm thresholds with a highly reduced response time (1 ms). SeTAC can be easily interfaced with the machine’s control logic to automatically activate the corrective measures defined by the user or linked to the company control network via Ethernet for continuous monitoring.
The tool’s internal memory enables SeTAC to carry out a black box function, recording up to 12,000 events and indicating the date, duration and value of the phenomenon.
|
|
- T1-45: Vibro-alarm
- T1-D: Absolute vibration monitoring, single channel with
- T1-D2: Absolute vibration monitoring, single channel with
- T1-EV1: Absolute vibration monitoring, dual channel with 2
- T1-EV2: Absolute vibration monitoring, dual channel with 4
- T1-EA: Absolute vibration monitoring, with 4 alarm relays
- T1-DADV: Absolute vibration monitoring, with 2 alarm relays
- T1-C: Relative vibration monitoring, dual channel with 4
- T3-NC2: Absolute vibration monitoring, dual channel
- T13-N: Speed monitoring, zero speed, reverse rotation
- T1-NC2: Axial displacement monitoring, dual channel with 4
- TMP: Vibrations monitoring, axial displacement, differe
- TMP-SOFTWARE: Diagnostic and data management software
- TM1: Vibrations monitoring, dual channel programmable
|
|
|
|
|
|
The XL2 is a handheld acoustical analyzer paired with a powerful Audio analyzer. The set of functions is ideal for testing, monitoring and logging of factory or machinery noise pollution.
The practical blend of electrical and acoustical functions, combined with computer connectivity through the standard USB interface, positions XL2 to be an indispensable tool for every engineer.
Acoustilyzer Features
Sound Level Meter
In addition to the familiar instantaneous and integrated sound pressure level (SPL) measurements, the repeatable LEQ and LCpeak measurements complete the event monitoring requirements.
The XL2 visualizes the actual audio spectrum (RTA) without interrupting ongoing sound level measurements. All measurement results may be logged to the internal memory for further investigations.
RTA, Real Time Analyzer
The enhanced real time spectrum analyzer (RTA) features high speed measurements with selectable 1/1 and 1/3 octave bandwidth. The RTA simultaneously provides real time single band SPL and LEQ measurements complying with the IEC 60804.
Stored spectra may be averaged or combined by using the available mathematical functions. The “Max-Min” display is particularly helpful for finding dominant room modes and characterization of listening areas.
Zoom FFT
Extremely fast, real-time Zoom FFT with resolutions up to 0.7Hz over the entire frequency range. The ideal tool for visualization of comb filters and narrow band effects. Features detailed cursor readout and data storage.
|
|
|
|
|
|
Data Logging Real Time Analyser
Description:
Model 30 Sound Level Meter & Real Time Analyser with 1:1 Octave Band Filters
The Model 30 (Class 1) and Model 30-2 (Class 2) are high performance, yet user friendly, integrating Sound Level Meters and Real Time Frequency Analysers.
Both models meet or exceed the latest standards for compliance with worldwide regulations and guidelines, making them ideal for most applications.
Taking measurements is as simple as pressing the 'record' and then 'stop' buttons. The wide single dynamic span of over 110dB ensures that you never make invalid measurements that 'Overload' or 'Under range'.
The Model 30 instruments simultaneously measures parameters with all Frequency and Time Weightings, this gives users the confidence to know they will always have the correct data for subsequent analysis.
Real Time Analysis allows users to measure all 10 individual 1:1 Octave Bands at the same time. This is very practical for reliable, accurate and rapid capture of variable noise levels to optimise the accurate prescription of hearing protection in industrial environments.
The Model 30 series can also be supplies as a Noise Measurement Kit containing all that is required to carry out a noise survey, including a Model 30 Sound Level Meter, Acoustic Calibrator, Windshield, Hard Attache Carrying Case, Wrist Strap, Carrying Pouch, Software, Calibration Certificates, Download Cable & Batteries.
|
|
|
Quest Technologies offers a complete line of datalogging sound level meters and real time analyzers. The SoundPro® SE/DL Series includes Advanced Hand Held Sound Level Meters and Real-Time Frequency Analyzers. When used with QuestSuite® Professional II applications software, you can simply and reliably perform your advanced noise analyses.
|
|
Choralis, orchestrate your measurement...
New regulations include requirements relative to airborne noise insulation, impact noise and noise generated by technical equipment from the design stage. The verification of building sound quality requires precision instruments perfectly suited to the requirements of field measurements.
01dB offers the “modular‿ technical solution that fully meets all issues relative to building noise measurements: sound level meter Blue Solo, combined with dBSolo-B wireless remote control, noise sources and dBBati software.
|
|
|
|
|
|
Colour Coded Sound with the CEL-620
Casella CEL has developed a colour-coded display system for sound level meters which simplifies use and reduces the risk of misinterpreting data. The new 620 series of pocket sized meters incorporate a high resolution colour display into the smallest and easiest to use sound level meter on the market.
The colour readout assists the user by displaying results in a simple colour coded format that is impossible to misinterpret. Ease of use has been a key design goal in the development of this instrument, so from simple point and shoot measurements to full industrial hygiene assessments, all measurements can be performed quickly and easily.
The CEL-620 uses digital technology that can measure in a range up to 140dB, dismissing the need for range adjustment and eliminating reading errors which may result. It measures all occupational noise parameters simultaneously; rather than changing the instrument setup you simply change which noise parameters you wish to view knowing that all parameters can be viewed afterwards even if not selected at the time. "The CEL-620 really presents the next generation of workplace sound level meters," said Tim Turney, Product Manager for Casella CEL. "A real-time octave band analyser has never been so compact and yet filled with technology designed to make life easier for the health and safety professional."
The CEL-620 is supplied as a kit in a rugged briefcase, which includes an acoustic calibrator, windshield, software and USB download cable. Instrument and calibrator come with calibration certificates as standard, documenting compliance with the latest IEC 61672 Sound Level Meter standard.
|
|
Battery powered Analog Audio Analyzer that fits into the palm of your hand.
It provides you with a comprehensive set of functions essential for the analysis of professional audio systems.
Minilyzer continuously measures the signal and displays the desired results with all complementary information on an illuminated hi-res graphical LC-Display.
The Minilyzer with software V2.00 (or higher) and the MiniSPL form a comprehensive integrating sound level meter.
Product-details
Measurement functions:
Level RMS, Relative
Sound Pressure Level
Distortion Analyzer (THD+N)
VU & PPM Meter
Speaker Polarity Test (for all speaker types)
Signal Balance Error
Frequency-/Time-Sweep Recording
1/3rd Octave Spectrum RMS & SPL
Scope
|
|
Programmable
Sound Level Datalogger
ModelFDSL 331
Auto Ranging Measurement 30dB to 130dB
Work with Window Software
32,000 Records Data Logger
Bar graph Indication with Back Light
USB cable available for optional purchase.
Specifications:
--------------------------------------------------------------------------------
DSL 331 FEATURES
Auto Ranging Measurement 30dB to 130dB
Work with Window Software
32,000 Records Data Logger
Bar graph Indication with Back Light
RS-232 Real Time Display Software for Window 95/98/2000
Frequency Weighting: A, C
4-Digit Display with updated cycle 0.5s
0.1dB resolution
Max/Min Hold Function
The standard Fast and Slow Time weightings
AC/DC signal output
Overload condition indication
Auxiliary output jack
IEC 651 Type II, ANSI S1.4 Type2.
Back screw hole tripod connection
External Power DC 9V input
Calibration Potentiometer easy to adjust
|
|
|
|
|
|
Vib008, Don’t let pain take hold!
Directive 2002/44/EC deals with the determination of limits and action values, for the daily exposure to vibration. Two physiological domains are addressed: the “hand-arm” and the “whole-body” domains, the acceptable statutory values of which are specified. The experimental protocol, as well as indicators relevant for assessment, is defined in Standards ISO 5349-2 and ISO 2631-1.
01dB-Metravib introduces a new portable instrument Vib008 that perfectly meets the requirements of this statutory application. This metrological instrument connected to a triaxial accelerometer is installed on site. Vib008 integrates a presence detector on the whole-body plate in order to activate subsequently the signal storage. Very simple to use, Vib008 is remotely controlled by the operator using a Pocket PC. This wireless remote control is used to manage measurement configurations (simultaneous “whole-body” and “hand-arm”), to start acquisitions (immediate, delayed mode) and to collect measured data for post-processing and archiving purposes, on several instruments at the same time … for a best prevention of Repetitive Strain Injury (RSI).
|
|
- Automatic determination of unbalance, losseness, misalignment and bearing condition
- Built-in LED stroboscope
- Measurement of FFT spectrum, Time signals and wideband values
- Check, whether your machines work under optimum conditions
- Find insufficiently lubricated bearings
- Automatic finding of revolutions
- Automatic determination of a total machine status
- Automatic determination of an operational status of a roller bearing
- Stethoscope function
|
|
●TV310 is equipped with low sensitivity probe, suitable for testing strong vibration signal.
●TV320 is equipped with high sensitivity probe, suitable for testing weak vibration signal.
●Two display modes: digital value mode and spectrum mode
●Large memory function:100×100 measured results(100 testing points, 100 data can be stored in each testing points ); 100 Spectral chart
●Spectrum chart can display in real time
●Easy diagnosis: alarm is sounded when vibration go over limit set ,and get into spectrum mode
●Testing results and spectrum chart can be printed out when connected to printer
●300×200 matrix LCD display, with backlight
●Compared with TV300, the testing result of TV310/320 is more accurate and stable especially in low frequency
|
|
Electronic vibrometer for measurement of vibration displacement and velocity
|
|
The TK81 Tunable Filter/Vibration Meter is a low-cost, portable handheld instrument for basic vibration measurements. It can display vibration in both unfiltered (overall) and filtered modes. It accepts inputs from displacement, velocity, and acceleration transducers, but does not provide power for them.
Its filtering capability is particularly useful for diagnosing vibration problems occurring at particular frequencies on all types of machinery. The TK81 is powered by a single 9V transistor battery.
|
|
|
Examiner 1000 is an overall vibration meter for ISO10816 specified measurements. Simple to use with only one button operation. Audio output acts as an electronic stethoscope. Measure acceleration, velocity or acceleration envelop for high frequency bearing defects. Comes complete with accelerometer, magnetic base, stringer probe, headphones and field holster. Click the link below to go to our website.
|
|
|
The international community has recently drawn considerable attention to occupational vibration and it's detrimental effects on the human body. In response to these new developments, Quest has released the HAVPro personal human vibration monitor and the "New" VI-400Pro real time vibration analyzer.
|
|
Carry this highly portable, handheld vibration meter in your shirt pocket. Its one-button operation switches between acceleration, velocity, and displacement—or click and hold for a digital reading up to 10 kHz. Reading can be displayed in Metric or English units.
The PVM100 is supplied in a convenient carrying case with all necessary accessories:
Portable vibration meter
784A accelerometer
Connector cable
PT2 probe tip
B3 magnet mount
SF6 mounting stud
Metric or English units available
|
|
|
|
|
|
The Columbia Model VM-300 Vibration Meter is a general-purpose vibration measuring instrument for periodic routine vibration checks of industrial machinery and general field use where portability and ease of use are required. This hand-held device is the ideal preventive maintenance tool.
Model VM-300 operates from a rugged, precision piezoelectric accelerometer and incorporates a charge amplifier input stage for stability and minimizing errors. Operation is controlled by an internal integrated microcontroller acting under direction of a splash-resistant 7- key membrane keypad.
features:
- An optional printer can be connected to the VM-300 Meter for making permanent records of readings taken.
- Dual power allows the VM-300 to be powered from its internal battery in the field, or from an external AC adapter to save battery life in bench applications.
- A precision low-voltage lockout circuit prevents the VM-300 Meter from making erroneous readings due to low battery.
- Automatic 10-minute timeout during battery operation prevents the VM-300 from draining its battery while untended.
|
|
Industrial plant such as rotating machinery will generate a vibration signature comprising spectral components associated with specific
primary vibration sources-rotors, bearings, moving parts. These will further excite passive, static elements such that the overall spectrum, although containing information relevant to say, balance, bearing wear, electrical faults, may be difficult to interpret.
Frequency selective measurement provides the means for recovering
meaningful source dependant data buried in wideband signals, and to therefore diagnose the state of specific machine components.
|
|
Machine Control MC 1002 is the basic vibration meter for measuring the effective vibration velocity v (rms) according to DIN ISO 10816-3 and the rolling bearing condition gSP according to the shock pulse method.
* Features
o Reliable, easy operation
o Immediately ready for measuring, no settings required
* Applications
o Vibration measurement and vibration checking on machines and machine lines
o Evaluation of rolling bearing condition
o Recognizing critical operational areas
o Early detection of failures
|
|
The backbone of all proactive maintenance is up to date data on the machine status, obtained with two well-tested frontline techniques. Vibration severity monitoring according to ISO standards diagnoses general machine condition. Shock pulse monitoring with the True SPM® Method gives early warning of bearing deterioration, the most common cause of machine failures.
Root cause elimination is true preventive maintenance. A poorly aligned and balanced machine wastes much energy and wears itself out. Do not tolerate excessive noise, vibrations and failure rates. Leonova is a state of the art maintenance tool for fast and easy alignment and balancing.
Condition monitoring costs money for equipment, training and labour. With Leonova, you have a free choice of suitable instrument functions and how to pay for their use.
|
|
●Analysis acceleration, velocity, and displacement
●For checking of unbalance, misalignment, bearings and gears
●Large memory of 100 results and 10 frequency spectrograms
●Includes a hand-held accelerometer probe with a removable magnetic base
●Rechargeable battery
●Large LCD display all functions and parameters
●Upper and lower limit setting and sound alarm
●Printer included
|
|
The CEL-300 Series includes the CEL-320/IS and CEL-360/IS dosimeters which can be converted to the CEL-320S/IS and CEL-360S/IS Intrinsically Safe sound level meters by simply exchanging the cable microphone assembly for a traditional stalk microphone and preamplifier. They are the ideal instruments for any form of personal worker surveys when considering the possible risk of hearing loss in the workplace. Conversion to a compact sound level meter enables comprehensive noise measurements to be carried out with the possibility of storage of the results for later recall from memory.
IS and non-IS models available
|
|
Noise dosimeter exposimeter Wed007
To address the issue of assessing individual noise exposure, dosimeter Wed007 and software dBLexd are the solution compliant with European Directive 2003/10/CE.
Based on a multiple-point metrological approach, the technical solution consists in deploying a set of "blind" dosimeters in the work place, which are operated with a remote control using wireless communication. This simple and non-invasive device is a valuable tool when implementing new regulations on the field.
Wed007 consists of an ergonomic and miniaturised housing, hosting acquisition unit, signal processing, data storage and data transfer. Only a single remote control of the Pocket PC type, dBWed, is required to drive 5 instruments at the same time. Noise measurement performance, electronic power and simplicity of the user interface, combined with Bluetooth wireless communication technology, make Wed007 the must-have device for optimum compliance with European Directive 2003/10/CE.
|
|
|
|
|
|
Model 22 doseBadge System
Personal Noise Dosimetry
Barriers to accurately assessing the noise exposure of workers are removed with the innovative Model 22 doseBadge System.
The revolutionary doseBadge is a self contained noise measurement device that has no cables, display or controls, making it an ideal solution for noise dosimetry because units cannot be tampered with during measurements.
doseBadges communicate with an infra-red Reader Unit - similar technology to a television remote control. The Reader Unit controls the doseBadge to program, calibrate, start/stop, download and store measurements.
All key parameters can be viewed on the large clear backlit screen of the Reader Unit, which also displays a time history graph of workers' daily noise exposure.
doseBadge Measurement Systems include all that is required to carry out a noise survey including: Model 22 doseBadge(s) with fixing mounts, Model 22-R Reader Unit, CHR20 Charger Unit, Power Supply, Hard Attache Carrying Case, USB Cable, Software, Calibration Certificates and Operating Manual.
|
|
|
|
|
|
Pulsar Instruments Noise Measurement Kit
Pulsar Instruments Plc also provide complete Noise Measurement Kits containing all the accessories required to carry out a noise survey.
The Pulsar Instruments Noise Measurement Kits include a Pulsar Instruments Sound Level Meter, Acoustic Calibrator, Download / Analysis Software, Hard Attache Case, Wrist Strap, Operating Manuals, Certificates of Calibration, Download Cable, Batteries and 1 year Warranty extendable up to 5 years.
The comprehensive Reporting Software supplied as standard (where applicable) enables the user to produce informative, professional reports with minimum effort.
To allow the Pulsar Model 30 series to be used outdoors, two weatherproof measurement kits are available. The standard WK1 kit uses the microphone, preamplifier and cable from the Sound Level Meter to make a simple, lightweight system suitable for overnight and occasional use.
For longer term measurements, the WK2 kit uses a complete integral outdoor microphone assembly, which has a superior degree of weather protection for the microphone capsule.
|
|
OROS offers breakthrough noise and vibration analyzers, the OROS 3-Series.
From 2 to 32 channels these comprehensive instruments offer powerful real-time analyses associated with a disk data recorder packaged in portable and professional units.
The OROS 3-series analyzers are flexible enough to handle your measurement, whatever the application. These instruments overcome most of the measurement obstacles with their wide frequency span from milliHertz to 40 kHz and the extensive 140 dB dynamic range. Thanks to these attributes, OROS 3-Series analyzers are the right choice for all your NVH activities.
4 mobile, real-time, multi-channels analyzers in the OROS 3-Series range: OR34, OR35, OR36, OR38.
|
|
P.I.N.D. - Particle Impact Noise Detection
Vibration Shock and Acoustics to insure the highest of reliability
For over thirty years the PIND Products Group of SPECTRAL DYNAMICS, INC. has given users a simple, reliable, and inexpensive method of Particle Impact Noise Detection (PIND) testing to increase the reliability of electronic components.
Our non-destructive high frequency acoustic test monitors for loose particles moving inside high reliability internal cavity electronic components such as relays, transistors, hybrids, integrated circuits, and switches – particles that have the potential of causing short circuits and serious malfunctions in system operations.
|
|
|
|
Acoustic measurement instruments, Vibration measurement instruments
