|
|
| Products 91 to 120 of 145 |
For sound-pressure level.
DB 100 sound level meter is reliable, easy to use and in accordance with metrology requirements. DB100 can measure :
-Sound-pressure level
-Time averaged or equivalent continuous sound pressure level
Sound-pressure level LA as per two weighting times FAST or SLOW
To be used for stable or slightly fluctuating sound sources.
Sound-pressure level (LA) unit is dBA and LAmax and LAmin values are saved.
Time averaged sound level LAeq
To be used for fluctuating sound sources. Time averaged sound level (LAeq) unit is dBA with a programmable integration time in minutes and seconds.
Join our distribution network all over the word....Contact us !
|
|
|
|
|
|
Easy To Use Sound Level Meter
Description:
Pulsar Model 14 Digital Sound Level Meter (AGP A13 Pulsar.jpg attached)
The Pulsar Model 14 is an entry level sound level meter for general purpose use whilst meeting the requirements of IEC 61672 to Class 2.
Is is also an ideal low cost instrument for those applications where a Sound Level Meter can be useful but a high specification instrument would be too expensive.
Noise levels can be checked quickly and simply, through the instrument's large and easy to read display, which shows the Sound Level (SPL) with the standard dB(A) frequency weighting. Also included is the dB(C) frequency rating.
A maximum hold function allows the unit to freeze the display showing the highest level measured. This can be used where the allowable level is given in terms of a maximum (LAFmax or LCFmax).
The Model 14 can also be supplied as a Noise Measurement kit containing all that is required to carry out a noise assessment including: Model 14 Digital Sound Level Meter, Model 106 Acoustic Calibrator, Windshield, Carrying Pouch, Certificates of Calibration, Batteries and User Manual.
|
|
|
Quest Technologies' Basic Series Sound Level Meters provide you with extremely easy-to-use tools for obtaining the most commonly required noise measurements, such as SPL, Lmin, Lmax, Leq/Lavg and Peak. With Quest, you get these features and conformance to independent sound level meter performance and intrinsic safety standards.
|
|
Sound level meter, incl. microphone, wind protection cap and battery
The ideal instrument for daily use. Whether it is for air conditioning or heating, disco noise, machine noise or noise in combustion systems, testo 815 is the ideal partner.
* Easy to adjust (adjustment screwdriver included)
* Frequency weighting to Characteristic A and C
* Maximum and minimum value memory
* Built-in tripod knuckle screw (1/4 inch)
* Switchable time weighting Fast / Slow
* testo 815:
* Frequency weighting
* Current value
* Time weighting
* Section measurement range
|
|
Sound Level Meter MA86193 with ALMEMO®- cable for measured value recording
Digital Sound level meter
Measuring according to IEC651, ANSI S1.4
Measuring level range: 35 bis 130 dB
Frequency weighting A or C
Output maximum measured level
Analogue output for connection to all ALMEMO®
measurement devices to record
|
|
Features:
- Backlight display.
- Auto range and auto power off.
- Min/Max storage and recall
- Test range from 30 to 130 dB.
- A & C frequency weighting.
- Fast & slow dynamic characteristic models.
|
|
CENTER 322
Features
If one needs long time on site sound monitoring, CENTER 322 will be the choice. With its build in 32'000 records deep memory, it can gather all the data you need just by this tester and a tripod. After the data is collected, the user can download the data to the computer at his convenient place.
|
|
ROGA MU-10
USB measurement microphone, is a new
generation of digital measurement microphones.
• The MU-10 is an easy to use sensor, which is detected by
the PC as USB Audio device.
• Flexible sensitivity adjustmet.
• RogaREC & VA FFT spectrum analyzer software
is included.
• MU-10 works with Linux, MAC OS and Windows.
ROGA-Instruments takes over no liability for the correctness and/or
completeness of the pictures and descriptions. We are left to ourselves
the right any time and without to carry out special announcement
changes in and/or the description.
|
|
In a compact case protected by a shockproof cover, the Physics Line C.A 832 digital sonometer checks sound levels from 35 to 130 dB in compliance with the IEC 651 type 2 standard.
• 3 measurement ranges
• accuracy: ±1.5dB
• resolution: 0.1dB
• 2 slow and fast integration times
• 2 weighting curves dB(A) and dB(C)
• memorisation of maximum value
• analogue output: 10mV/dB and 1V RMS - 600W
• possibility of tripod mounting
• 2,000-count display
• dimensions: 237 x 60.5 x 38 mm – weight: 230g
• shockproof protection cover
|
|
The LA-1200 series (consisting of four models) achieves a wide linearity range of 85 dB and operates no less than 40 hours continuously with two type AA batteries.
The series includes models with memory, comparator and external control functions, which enables to capture sudden noise and synchronous operation of several meters.
LA-1200 is designed for operational easiness to be realized at the measurement site.
Features
- Wide 85-dB linearity range
- Long battery life, realizing approx. 40-hours continuous operation
- Setup resume function for quick startup of measurement, with measurement condition storage
- Key protection function to prevent erroneous or accidental operation
- Comparator output and external control setting capability
- Time scheduled operation for environmental measurements (on LA-1250)
|
|
The Edge - Cable Free Noise Dosimeter
When it comes to innovation, we left no stone unturned. As the market leader in noise dosimeters, we designed the most innovative cable-free dosimeter on the market. No longer is there a concern with cables interfering with the task at hand and you won’t even know you have it on, weighing only 2.4ozs/69g. The thin, contoured shoulder mount conforms to the worker’s body for superior comfort. The Edge features up to two dosimeters allowing user selectable options and datalogging with time history values. The intuitive buttons on the instrument allow you to easily run, navigate and review data.
The new Edge eg5 is now rated intrinsically safe!
|
|
The most complete and reliable solution for the full spectrum of tightness testing, leak detection and predictive maintenance.
The SDT 170 encompasses our company's vast experience in the fields of ultrasonic leak detection, tightness testing and predictive maintenance. It is robust, lightweight, user friendly and ergonomically designed. It provides a totally efficient, and simple response to proper and effective equipment maintenance and product quality.
|
|
The Ultraprobe 9000 Kit Complete is a digital ultrasonic inspection, information storage and retrieval system that is so versatile, so easy (most operators are able to use the Ultraprobe 9000 within 15 minutes) and so much fun to operate, you'll be looking for opportunities to use it every day.
Open Platform Software
Interchangeable Modules
Frequency Tuning
Spin and ClickTM Technology
120 dB Dynamic Range
400 Memory Locations record: dB, Frequency, Time, Date, Text, Operation Mode & More
Acoustic Isolating Headphones
Environmentally Friendly Rechargeable Batteries
Superior Application Support
Easy interface for most Vibration Analyzers including: SKF, ENTEK, DLI, CSI, DI
Developed by the Industry Leader in Airborne Ultrasound
|
|
|
|
|
|
The OROS 3-series analyzers are flexible enough to handle your measurement, whatever the application. These instruments overcome most of the measurement obstacles with their wide frequency span from milliHertz to 40 kHz and the extensive 140 dB dynamic range. Thanks to these attributes, OROS 3-Series analyzers are the right choice for all your NVH activities.
Able to accurately manage all types of Tach /keyphasor, OROS 3-series analyzes rotating machinery signals with their comprehensive toolset. Synchronous order analysis and constant band order tracking reveal hidden details during speed variation. The 3D waterfall and profiles give clear overviews of coast-downs or runs-up.
Acquire, Store, Analyze and Report is your everyday work in noise and vibration tests and R&D? Automotive, Aerospace, Consumer, Industry and Energy are demanding domains where you get more and more data to measure while delays for the results delivery are getting shorter. Focusing on your time to result challenge, OROS offers breakthrough noise and vibration analyzers, the OROS 3-Series. From 2 to 32 channels these comprehensive instruments offer powerful real-time analyses associated with a disk data recorder packaged in portable and professional units.
|
|
|
|
|
|
PUMA / COUGAR Vibration Control and Analysis System
Puma Revolutionizing Vibration Testing
PUMA (Cougar for portability) utilizes Spectral Dynamics’ innovative Computer-Aided Test Suite™ (CATS) architecture. Both take full advantage of the PC’s powerful Intel processor and Windows XP technology. Optimized for multi-tasking, and founded on industry connectivity and data interchange protocols, the CATS make your entire test and validation process more timely and efficient.
Versatile Test Capabilities
The Computer-Aided Test Suite™ vibration control and analysis applications were designed to meet a wide range of test requirements. With scalable hardware and software the Vibration Control and Analysis System combines the simplicity of operation required for production screening with the power and versatility required for R&D prototype testing.
Technical Specifications
• 4 to 32 input channels with ICP
• Analysis to 40 kHz with 12,800 lines
• Scalable h/w and s/w architecture
• Powerful Multiple DSP architecture
• Comprehensive vibration test capabilities
• Extensive laboratory integration and test automation features
|
|
|
|
|
|
The OROS 3-series analyzers are flexible enough to handle your measurement, whatever the application. These instruments overcome most of the measurement obstacles with their wide frequency span from milliHertz to 40 kHz and the extensive 140 dB dynamic range. Thanks to these attributes, OROS 3-Series analyzers are the right choice for all your NVH activities.
Whatever the method you are using, Impact hammer or SiMo/MiMo shaker excitations, FRFs are acquired confidently. A set of innovative tools such as node path sequencer and preview of averaged coherence dramatically speeds up modal data acquisition.
Acquire, Store, Analyze and Report is your everyday work in noise and vibration tests and R&D? Automotive, Aerospace, Consumer, Industry and Energy are demanding domains where you get more and more data to measure while delays for the results delivery are getting shorter. Focusing on your time to result challenge, OROS offers breakthrough noise and vibration analyzers, the OROS 3-Series. From 2 to 32 channels these comprehensive instruments offer powerful real-time analyses associated with a disk data recorder packaged in portable and professional units.
|
|
Vibration Analysis
Component vibration design requires full-field information of single component and assembly modes.
The Dantec Dynamics vibration measuring systems replace single point accelerometers and sensor attachment, or mass loading, delivers three dimensional vibration modes including in- and out-of plane components of the vibration within seconds after the test.
3D High Speed Correlation System Q-450
Dynamic measurements of full-field 3D displacements
and subsequent analysis of strains.
3D Vibro-ESPI System Q-500
Enables complete 3 dimensional and highly sensitive vibration analysis of almost any component.
|
|
The most cost-effective, accurate, powerful entry into Structural Analysis available today.
Bobcat, built for:
Vibration Analysis
Transient Analysis
Acoustical Analysis
Modal Analysis with enhanced features
Swept Sine Analysis, with Tracking Filters
Signal Analysis with optimal displays
Simply making accurate measurements
|
|
TMC Modal Shaker
To provide the turnkey Modal test solutions to our customers,
TMC Solution produces the components for the total modal
test system,including the impact hammers,signal generators,
accelerometers,signal conditioners,modal shakers,modal
power amplifiers,High speed dynamic data acquisitions and
Analysis systems,etc.
TMC Solution offers series of modal shakers from 10N to
1,000N,specially designed for the vibration environment
testing and modal analysis.To excite high efficient thruster
force,shakers are driven by rare-earth permanent magnets.
The special design of the modal shakers is characterized
by wide usable frequency,long stroke,light weight,smart size.
Features:
Wide Frequency Range
Light weight,smart size
High Efficiency,rare-earth magnets
Use as small scale vibrator or modal shaker
Applications:structural vibration experiments,dynamic structural simulations,fatigue testing of
parts,modal test/finite element modal analysis
|
|
The Reovib BK032 is a monitoring unit for vibratory feeders. By using this measuring device in conjunction with an accelerometer e.g. Reovib SW10, vibration levels can be monitored. An acceptance window can be set defining adjustable maximum and minimum limits. If either of these values are exceeded then a corresponding relay will operate. During the unstable, start-up phase a time delay can be set so that spurious readings are ignored. The unit has a built-in sensor power supply available for direct connection. A 4...20mA signal can be used instead of an accelerometer.
|
|
|
|
|
|
|
It is typically necessary to conduct measurements at the location of the future installation of ultra-accurate 3D measurement machines in order to guarantee that existing floor vibrations do not exceed the maximum allowed values. Vibrational accelerations are measured within a defined frequency range, (1-100 Hz) as a simple sum value measurement cannot provide a sufficient amount of information about the exact conditions. Evaluation of the force-distance signal is conducted with a Fast Fourier Analyzer that displays a measured value for each frequency of the spectrum. (vibration acceleration in g) In case the disturbances (vibration immissions) exceed the permissible range, our PC calculation software can help to ascertain the suitable isolation. Very precise vibration analysis in the lower frequency range can be conducted with a highly-sensitive geophone. Vibration speeds of under 0.01µm/s in the range of 0.2 to 30Hz can be recorded with a geophone. Especially in the semiconductor, nanotechnology, and ultra-precise 3D measurement industries it is necessary to conduct very precise vibration measurements in order to guarantee an optimal and client-specific configuration.
|
|
|
|
|
|
The DT9837A is a highly accurate USB data acquisition module that is ideally suited for portable noise and vibration measurement and analysis. Four 24-bit IEPE (ICP) sensor inputs are synchronized with a tachometer input to provide data streams that are matched in time for field or laboratory use. A read-back channel from the analog output guarantees perfect correlation of all signals in the input stream, the output stream, and the tachometer.
This rugged small module is self powered via the USB connection to a PC or laptop, no external power supply is needed. This makes it ideal for portable measurement applications. Additionally, two modules can be triggered simultaneously for perfectly synched measurements over eight inputs.
The DT9837A ships with a software applet to get you up and running right out-of-the-box. This applet supports basic operation of the module and can be easily modified for more advanced capabilities using Measure Foundry®, our popular rapid application builder software.
|
|
|
|
|
|
HI 3600 Machine Monitor
Full Functionality:
- Vibration Monitoring: Vibration can be monitored through acceleration, velocity, and displacement measurement, with customizable filtering. The HI 3600 will accommodate whatever sensing mechanism and monitoring range is best suited for you and your applications, regardless of whether it involves probes, accelerometers, or high/low frequencies.
- Impact Measurement: for reciprocating motion issues such as mechanical looseness or detonation: While many equipment issues can be monitored using vibration monitoring, impact measurement will call attention to impact or shock related issues that are often times hidden using typical vibration monitoring technologies.
- Rod Drop Monitoring: Rod drop monitoring is a capabilitiy used to measure the wear and tear on rider bands, rings, and seals for reciprocating engines and compressors.
- Expansion Channels: With an Additional 16 Channels, you can monitor any parameter in the process (such as temperature, KW Load, or position), tying them into the 3600 Machine Monitor.
Full Connectivity:
The HI 3600 uses the Hardy-Links Connectivity structure of the 3000 Controllers to allow you to connect to your process from anywhere.
- Hardy Web-Link is an embedded webserver that enables local or remote access to your condition monitoring system.
- Hardy e-Link is an electronic mail feature that enables your machine to a) notify you of alarms, or b) receive a customized equipment performance report. These emails can be sent to PC's, cell phones, or to pagers.
- Hardy PDA-Link allows you to access all aspects of your 3600 Machine Monitor using the IR Port on your Palm PDA.
|
|
|
|
|
|
600 Series
Dynamic Signal Analyzer (DSA)
Vibration data acquisition, analysis, and monitoring has never been easier than with the new IOtech 600 Series of dynamic signal analyzers and eZ-Series software. More than 30 years of engineering experience in vibration measurements have gone into the design of the 600 Series of DSAs.
Key Highlights
• Analysis frequency ranges are software programmable from 20 Hz to 40 kHz
• 24-bit Sigma Delta ADC per analog input
• Spurious-free dynamic range of 108 dB (typical)
• AC/DC coupling, software selectable per channel
• TEDS support for accelerometers
• Pseudo-differential input
• Total harmonic distortion of -100 dB (typical)
• Channel-to-channel phase matching of <0.12 degrees at 1 kHz
• 8-bit digital IO port
• USB 2.0 high-speed
640 Models
• 4 analog inputs, ±10V input range (±60V max without damage)
• 2.1 mA IEPE current source per channel (20V compliance)
• 1.0 Hz AC Coupling HPF
• 24-bit Sigma Delta DAC analog output
• Analog outputs: sine, swept sine, random, burst, arbitrary
• Analog output signal-to-noise ratio: 100 dB (typical)
650 Models
• 5 analog inputs, ±40V input range (±60V max without damage)
• 2.1 mA IEPE current source per channels 1-4 (20V compliance)
• 0.1 Hz AC coupling HPF
|
|
| ... products without technical information |
| |
|
|
Acoustic measurement instruments, Vibration measurement instruments
