|
|
|
|
|
|
The OROS 3-series analyzers are flexible enough to handle your measurement, whatever the application. These instruments overcome most of the measurement obstacles with their wide frequency span from milliHertz to 40 kHz and the extensive 140 dB dynamic range. Thanks to these attributes, OROS 3-Series analyzers are the right choice for all your NVH activities.
Get accurate and comprehensive results representing noise phenomena within a portable instrument is what OROS 3-Series offers to acoustics specialists. The 1/n octave band analyzer and the overall level meter (OVA) deliver data complying with international standards within class 1 requirements. Take benefit from the OROS 3-Series mobility for your industrial acoustic measurements and improve your efficiency.
Acquire, Store, Analyze and Report is your everyday work in noise and vibration tests and R&D? Automotive, Aerospace, Consumer, Industry and Energy are demanding domains where you get more and more data to measure while delays for the results delivery are getting shorter. Focusing on your time to result challenge, OROS offers breakthrough noise and vibration analyzers, the OROS 3-Series. From 2 to 32 channels these comprehensive instruments offer powerful real-time analyses associated with a disk data recorder packaged in portable and professional units.
|
|
|
|
|
|
The WCA mini AD3661 - It goes where you go- Portable 4-channel Noise & Vibration Analysis System
- USB bus power unit
- 24 bit, 4-channel measurements
- A channel exclusively for tacho pulse measurements
- WCAPRO (multi analysis software)
- FFT analysis and real-time octave analysis
- Tracking analysis and throughput recording/playback
- Equipped with WCA Lite (easy-to-use analysis software)
* Configuration
Standard configuration
- AD3661 Hardware (size: 30(H) x 139 (W) x 138(D) mm, weight: 330g,
including UBS cable and power adaptor)
- WCA Pro software and license for basic FFT analysis
* Options for WCA Pro software
2D tracking license
3D tracking license
Real-time Octave analysis license
Time-series filtering license
[Features]
A portable and lightweight, USB bus powered unit
The WCA mini is small and light enough to fit into your travel case. Its actual size is Height 30mm (height) x Width 139mm x Depth138 mm (width), and weights is only 330g. Power can be supplied from athe USB bus, allowing you to perform noise and vibration analyses anywhere.
User-friendly GUI and WCA Lite with improved ease of operation
With enhanced operability, the WCA mini has adopted the same design concept employed in the highly reputed WCA. WCA Lite will enable simple operation of FFT and tracking analyses.
Complete compatibility with the CompactWCA/WCAonPC
A compatible user interface eliminates the need for additional training of existing users.
WCAPRO, multi-analysis software
WCAPRO provides real-time FFT analysis for noise & vibration testing.
Please see the AD-3661 catalog for further details.
|
|
- Automatic determination of unbalance, losseness, misalignment and bearing condition
- Built-in LED stroboscope
- Built-in Infrared Thermometer
- Built-in Stethoscope
- Acceleration, velocity and displacement measurements
- Measurement of FFT spectrum, Time signals and wideband values
- Check, whether your machines work under optimum conditions
- Find insufficiently lubricated bearings
- Automatic finding of revolutions
- Automatic determination of a total machine status
- Automatic determination of an operational status of a roller bearing
|
|
|
|
|
|
Portable Data Acquisition FFT Analyzer Soundcard. Two high quality, high speed, IEPE simultaneous sampling inputs, 24 bit ADC, for NVH measurements.
RogaDAQ2 datalogger is a high performance portable Data Acquisition Device. It features two high quality, high speed, 24 bit simultaneous sampling inputs, 4 auxiliary inputs, two configurable tacho-inputs and additional digital I/Os.
The main inputs of the RogaDAQ2 are simultaneously sampled precision analog inputs for recording static and dynamic signals. Sampling rates up to 48 kHz at 24 bit resolution are supported. Each channel features instrumentation quality preamplifiers with AC or DC coupling and constant current sensor supply for directly supporting IEPE-type sensors. In addition, the RogaDAQ2 is equipped two highly flexible RPM inputs featuring individual pulse width counters, yielding RPM and phase relative to the main channels. The trigger levels are programmable between +/-25 Volts. In a complex measurement application it is often necessary to measure the main channel inputs in correlation with other data. For this purpose, the RogaDAQ2 features for auxiliary analog channels along with four digital I/Os.
|
|
Two-channel Analyser, Collector, Balancer, Recorder
OneProd MVP-2C is an “all-in-one” modular system designed to improve the reliability of your machines through vibration analysis.
OneProd MVP-2C is equipped with a high-brightness colour screen and its user-friendliness favours users’ comfort and productivity.
Ultra compact, 2 x 40 kHz channels + trigger input channel, for the control and analysis of vibrations in industrial settings:
• FFT analyser,
• Data collector,
• Balancer,
• DAT recorder,
• Order analyser,
• Pyrometer (°C),
• Integrated laser-sighting tachometer (RPM).
Full set of tools for the detection and analysis of bearing defects (Bearing factor, Kurtosis, Envelope) – Automatic contactless identification of the measurement point – Communication through USB, RS232 and Internet (e-Route module). Exists in intrinsically-safe mode for measurements in areas where explosion hazard is permanent (zone 0).
|
|
|
The international community has recently drawn considerable attention to occupational vibration and it's detrimental effects on the human body. In response to these new developments, Quest has released the HAVPro personal human vibration monitor and the "New" VI-400Pro real time vibration analyzer.
|
|
Description :
The Virtual Corset™ has been described as "a gentle reminder to stand up straight". A more erect posture can reduce trunk muscle activity, and may reduce the loads borne by the spinal column.
By combining an inclinometer, data logger and silent vibrating alarm in a tiny pager enclosure, the Virtual Corset™ keeps track of trunk inclination, and warns the wearer when a prescribed inclination angle limit has been reached. The clinician or therapist sets the unit's inclination limits, sample frequencies, and data save intervals using the serial port of a personal computer (PC); once programmed, the Virtual Corset may be disconnected from the PC. In the field, it performs its pre-programmed datalogging and biofeedback tasks while worn anywhere: during work, play, exercise, and rest.
|
|
8-Channel Measurement Box with IEPE-Sensor Supply and USB connection
Compact, portable, measuring and control system for reliable sound and vibration, transient analysis.
High precision, 24-bit measuring technique, provides a signal-to-noise ratio of 100 dB.
The Integrated Electronic Piezo-Electric sensor supply (24V/4mA) is software selectable by individual channel.
Measure ready system. Numerous software options available.
|
|
|
|
|
|
The SBS AEMS (Acoustical Emission Monitoring System) is the latest addition to the SB-4500 product. This optional add-in card for the SBS control system offers our customers the capability to monitor their grinding process with exceptional precision. The AEMS product uses proprietary acoustic sensor technology to monitor the very high frequency signals generated on the grinding machine structure during key events in the grinding process.
The benefits to the user include elimination of grinding gap time in the grind cycle, automatic notification of part crash conditions, and automatic quality monitoring of wheel dressing. The gap time in a CNC controlled grinding cycle, represents the time required for slow grinding wheel infeed prior to making contact with the work piece. The position of the workpiece with respect to the grinding wheel can only be known within the tolerances of the part and process. Rapid wheel infeed must therefore be stopped prior to where part contact is expected, and the wheel very slowly moved in toward the workpiece, until contact is achieved. This can add significantly to the time required to grind each part, reducing production efficiency. Gap elimination can provided by the system when used in conjunction with the machine's CNC control. The AEMS system allows rapid and automatic grinding wheel infeed right up to the point of initial contact with a new part loaded in the machine. The system can automatically detect the initial contact, and very quickly report this event to the machine control, which then stops the wheel infeed, without operator intervention required.
|
|
|
2 channel USB sound card with IEPE sensor supply. It can be used for noise and vibration measurement.
|
|
|
|
|
|
RogaDAQ 16 datalogger Description:
With the introduction of the RogaDAQ16 USB2.0 data acquisition system, a new age of measurement technology begins.
USB 2.0 / 480MBIT (USB1.1/12MBIT COMPATIBLE)
16 analog input channels (16bit/500kHz max.)
IEPE sensor supply (24V/4mA)
0.125V to 10V input range
Individual preamplifiers
4 analog output channels (16bit/100kHz)
Powerful DSP (255MIPS) for filtering, control etc.
24 digital I/Os
Optional 24bit counter, timer, PWM, incremental encoder
Free drivers for major application software
including DASYLab; LabView & DiaDem drivers & RogaRec Software; FlexPro7 Standard
The RogaDAQ16 is an affordable multichannel IEPE solution. The USB 2.0 interface permits unrivalled portability. Hotplugging the data acquisition unit during operation has now become a reality. The compact and rugged measurement unit with its BNC connectors breakout boxes obsolete. Downward compatibility to USB 1.1 also permits to run this high performance measuring system with older hardware. Simplicity of integration, whether mobile or stationary, has reached a new level.
|
|
VC-2100 - Vibration Comparator
Our line of vibration comparators can serve as your vibration "watchdog" in a wide range of situations in which vibration based judgments must be made, such as in go/nogo vibration testing of products, facilities diagnosis and machine tool cutting tool damage.
Features:
- Simultaneous two-band measurement.
- Digital display function.
- Analog output.
- Headphone output.
- Comparator gate.
- Comparator time delay setting.
- Compact 96 x 96 (DIN) size.
Specifications:
- Number of Input Channels: 1
- Input Range: 0.1 to 50000 m/s2
- Number of Settable Bands: 2
- Measurement Modes: Rms, Peak, Maximum hold, Peak hold
- Output Modes: Analog output, Headphone output, Cal signal output, RS-232C output, Over output
- Comparator Function: Judgements made independantly for each band
- Operation Temperature: 0 to 50º C
- Dimensions: 96 mm x 96 mm x 112 mm (DIN)
- Weight: Aproximately 500 g
|
|
|
|
|
|
SIR-3000 Series
Raid One Data Acquisition
The robust new SIR-3000 series recorders from Sony are a redundant, secure, customizable and networkable solution for today’s critical sound and vibration data acquisition requirements. The dependable new recorders limit the potential of having to repeat critical, difficult or expensive tests due to data acquisition failure.
The SIR-3000 Series features hot swappable, front mounted dual hard disk drives to protect valuable data in a RAID One array. The redundant high capacity 200GB drives insure high volume tests are accurately captured each and every time without the worry and expense of a drive or media failure.
Regardless of the sampling rate, the system accurately records data to the redundant hard disk drives at a 12Mbps recording rate. The test engineer can have direct access to specific data during post processing with the elimination of the need to wind and rewind the tape.
Sony has included data security features including a built-in Nickel metal-hydride battery back up for both main AC and DC power sources that provides an orderly shutdown to prevent data loss. The drive is also key lockable and can be quarantined for maximum-security.
Recording channels can be expanded up to 128 channels with additional units for data input. Two measuring unit options are also offered: the SIR-3032i with a sampling frequency of 48kHz(20kHz) or the SIR-3032W with a 192kHz(80kHz) sampling rate to further customize the system.
|
|
RT-2M
RT-2M is a fast 2-channel audio generator and analyzer. The instrument is optimized for high-volume production lines and QC sampling inspections of
- Mobile phones
- Speakers, Receivers
- Head-sets
- TV’s
- Amplifiers
- Other audio related products
RT-2X
RT-2X is a fast 2-channel voice frequency test system with analog and digital interfaces (POTS, ISDN, T1, E1, J1, PCM) for telecommunication device testing, such as
- POTS tests incl. SRL and RLR
- IADs, xDSL Modems
- Telephone Line Cards
- ISDN Telephones
A2 / A2-D
The A2 is an analog, 2-channel audio analyzer supporting stand alone or PC-controlled test applications in R&D or production.
|
|
1121 Audio Analyzer
The Model 1121 audio analyzer provides fast, accurate measurements including frequency, AC or DC level, distortion, SINAD and signal-to-noise ratio. It also includes an audio source providing accurate low distortion signals over wide frequencies and level ranges.
• Frequency range from 10 Hz to 200 kHz
• Low-distortion audio source for testing systems, amplifiers, receivers and components
• Measures AC/DC level, distortion, SINAD, S/N, frequency
• Ten readings per second
• 50-, 150- and 600-ohm output impedances
• 300 µV full-scale range sensitivity
• 70 dB Common Mode Rejection Ratio
• Sweeps frequency or level
• Non-volatile memory for instant recall of up to 99 complete front-panel setups
• IEEE-488 interface
|
|
Digital and analog audio analyzer for production, laboratory and service
While the R&S®UP300 is ideal for numerous analog audio measurements, the R&S®UP350 has added capability for performing measurements on digital audio instruments. For details see R&S®UP300.
|
|
|
|
|
|
Assessor Range
- Model 81 & Model 82 Integrating Averaging Sound Level Meters with Leq & Peak(C)
- Model 81CA & Model 82CA Integrating Averaging Sound Level Meters with Leq & Peak(C) plus dB(C)-dB(A) Mode
- Model 83 & Model 84 Integrating Averaging Sound Level Meters with Leq & Peak(C) plus 1:1 Octave Band Filters
The Assessor Series is a range of simple to use Sound Level Meters designed to be used for Noise at Work Measurements and General Purpose noise testing.
All of the Assessor instruments are Integrating Averaging Sound Level Meters providing for the measurement of LAeq and LCPeak. The instruments are ideal for compliance with the requirements of the EU Physical Agents (Noise Directive) as well as many other Occupational Noise Regulations and Guidelines.
The Assessor Range of instruments are available as either Class 1 or Class 2 and can also be supplied as a Noise Measurement kit containing all that is needed to carry out a noise survey including the Assessor Sound Level Meter, Acoustic Calibrator, Windshield, Hard Attache Carrying Case, Operating Manual, Calibration Certificate, Batteries and 'Analyser' Software (where applicable).
|
|
Vibration Supervisor DMM-4000/TGV
These field mounting devices consisting of sensor and specific transmitter prepared for preventive control of vibration in bearings of heavy machinery by means a trending system activing alarms according several criterium. These models transmit RS-485 Modbus and 4-20 mA signal proportional to the vibration speed. Optionally can transmit by Radio, Ethernet cable or WiFi.
|
|
The most complete and reliable solution for the full spectrum of tightness testing, leak detection and predictive maintenance.
The SDT 170 encompasses our company's vast experience in the fields of ultrasonic leak detection, tightness testing and predictive maintenance. It is robust, lightweight, user friendly and ergonomically designed. It provides a totally efficient, and simple response to proper and effective equipment maintenance and product quality.
|
|
The Ultraprobe 10,000 brings Ultrasound Inspection technology to a whole new level. With this one system, inspectors can perform condition analysis, record sounds, store and manage data.
With the push of a button, it is now possible to record a sound sample directly into the instrument and link it to one of 400 record files stored in the Ultraprobe.
Specialized Application Screens
Adjustable On/Off Features
Connect to External Devices
Flexible Reporting Options
|
|
VIBRATION INSTRUMENTATION & CONDITION MONITORING
a) VIBRATION MONITORING
A range of vibration meters such as the MV 100, MV 200, MV 400, MV 410 (B) etc. are available to measure vibrations. The MV-410 (B) is specially suited for evaluating the condition of bearings in actual operations besides vibration measurement.
A range of vibration analyzers like MV 306, MV 310, MV 320 etc. are available for vibration analysis ( frequency analysis) in addition to vibration vibration measurement. Field balancing can be done with a vibration analyzer by the use of stroboscope.
|
|
Noisecom's NC 3000 Series calibrated coaxial noise sources are well suited for receiver testing, noise figure measurements, or applications that require broadband noise and fast switching times. Several models include output isolators, and voltage regulators that provide excellent stability over varying temperature and voltage ranges. The NC 3000 Series includes the NC 3100 units with 15 dB ENR output for noise-figure meters, and the NC 3200 Series high-output noise sources with outputs between 26 and 35 dB ENR for radar and satellite communications system testing.
Features
- Noise output rise and fall times less than 1 μs.
- VSWR as low as 1.35:1.
- Noise output variation < 0.01 dB/°C, and < 0.1 dB/1%ΔV.
- Input power +28 VDC at 30 mA max.
|
|
|
|
|
|
NTi Audio TalkBox greatly simplifies the acoustical feed of the STI-PA intelligibility test source signal into closed sound reinforcement systems. It presents the standardized voice-like acoustical signal emission simulating a human talker according to IEC 60268-16, combined with a TNO certified speech intelligibility signal at standardized levels.
NTi Audio TalkBox features human head-like dimensions and is based on a Solid-State-Generator with CF-Card. It perfectly equalizes the STI-PA test signal and replays it at the precisely correct playback sampling rate, also minimizing systematic errors through the internal amplifier and internal precision loudspeaker. Due to the required overall accuracy of ±1 dB over the relevant frequency range, each TalkBox is individually equalized and calibrated for precision output. The radiation characteristic complies with the ITU-T P.51 in wide ranges. The built-in combination of solid state generator and DSP ensures highest playback accuracy and lowest sample frequency deviations with minimized jitter effects.
|
|
The VIBROCONTROL 6000 Compact monitor initiates a new period of vibration measuring and machine condition monitoring.
It is exactly adapted to the specific requirements of the machine to be monitored. Standard monitoring, if necessary, but also diagnostic monitoring, if needed.
Our huge application library offers you a great number of already practised solutions. Should this be insufficient to fulfil
your requirements, our application engineers will work out the optimum machine protection for your precious
manufacturing facilities.
|
|
4-Channel High Performance USB Data Acquisition
The DT9837 and DT9837A are highly accurate data acquisition modules that are ideal for portable noise and vibration measurements. Four 24-bit IEPE (ICP) sensor inputs are synchronized with a tachometer input to provide data streams that are matched in time for field or laboratory use. The rugged small module is self-powered via the USB connection to a PC laptop. BNC connections are provided for all I/O signals for secure and easy-to-use operation.
|
|
Ultra-portable Vibration Monitoring
- Weighs less than 0.4kg
- 4 Analogue channels/housing
- 1 Tachometer Input/housing
- 1 Analogue output/housing
- Up to 52kHz per channel
- Synchronous across all channels
- AC, DC, and ICP inputs
- USB Interface
- 106dB SNR
- Multi-unit operation
The new ultra-portable data acquisition system providing dynamic data capture for a wide range of field and mobile or test facility applications.
Four Analogue input channels plus Tachometer and Analogue Output per housing.Versatile self-contained solution with data streamed to a laptop or other PC via USB. Synchronous 24-bit ADC per channel provides wide dynamic range with 25.8kHz bandwidth.
Synchronization between units ensures Mosquito offers modular expansion to meet your larger channel-count requirements.
|
|
Electrical Diagnosis Solutions
OneProd ESA offers the unique integration of electrical analysis into vibration analysis, for full monitoring of electrical machines. The OneProd ESA (Electrical Signature Analysis) system implements permanent electrical analysis, and allows for reliable monitoring and diagnosis of electrical motors, their electric power supply and driven machines.
With voltage and current transducers associated with an electrical interface unit, OneProd ESA can integrate the OneProd MVX acquisition system (see specific data sheet), the data of which are processed by the OneProd XPR software (see specific datasheet).
The system can be implemented quickly, due to the large database on electric motors available, and the automatic diagnosis feature offered by OneProd ESA can also help the user to get started.
|
|
|
|
|
|
The FlowHUB is ideal for condition monitoring, test stands and closed loop control applications both for fluid power and lubrication systems. The FlowHUB can measure and display flow and temperature readings as well as switch and transmit flow values. This enables a system designer to trigger alarms, shutoffs and transmit real-time values to a PLC using just one component, instead of up to six which might have been required conventionally. This represents a significant cost saving in terms of reduced complexity of wiring and far fewer components.
It is available in five flow ranges from 1 to 360 lpm (0.25 to 100 US gpm) and in two pressure ranges 210 and 420 bar (3,000 and 6,000 psi). The FlowHUB is available in three versions - ‘Switch’, ‘Transmitter’ and ‘Ultimate’, all three versions have built in temperature measurement and a large bright digital display.
The 'Switch' version provides two configurable switched outputs; the trigger flow rate, time delay, sense (above/below) and normal mode (normally closed / normally open) can all be freely configured. Each switch is independent and can switch up to 500 mA. The 'Transmitter' version provides a conditioned analogue output either 0 to 5 Volts or 4 to 20 mA - full scale is configurable to any maximum flow. The 'Ultimate' version has both the switches and transmitter and the highest pressure rating of 420 bar (6,000 psi) as well as an enhanced response time of 50 ms.
Other configurations are available on request.
|
|
|
|
|
|
Innovative hardware
The compact diagnosis system efector octavis evaluates vibration signals using the methods of frequency analysis. The system uses a micromechanical acceleration sensor. Data can be collected, processed and evaluated decentrally with no expert know-how required.
Continuous monitoring
efector octavis is designed for the early detection of rolling element bearing damage or unbalance. Continuous monitoring offers a reliable and cost-effective solution as compared to intermittent methods.
The unit type VB1001 monitors up to two different objects. The unit type VE1001 can monitor up to five different objects or 20 individual frequencies. An object is defined as a rolling element bearing or a shaft. With efector octavis permanent vibration monitoring is no longer a question of price.
The integrated expert
Acoustic emission is detected, the frequency spectrum is calculated and e.g. the rolling element bearing state, the unbalance etc. are evaluated. The condition can be directly read on site and is signalled by binary switching outputs. The switching signal can be transmitted via unscreened cables. Connection to bus systems
is possible.
|
|
Hydrosteel 7000 is a fixed, totally non-intrusive device for the continuous monitoring of hydrogen flux at high criticality sites within petrochemical and gas production and petrochemical refining operations.
Hydrogen flux measurement relates directly to active sour and HF corrosion at <100 °C, and any acid corrosion (e.g. sulfide/napthenic acid) at higher temperatures, and is designed for fixed monitoring on steel surfaces subject to these corrosion scenarios, such as in sour gas wells, lines, storage facilities and treatment plants, amine and alkylation units, distillation columns, outlets and heat exchangers (NAC), and cracking unit overheads.
|
|
|
|
Acoustic measurement instruments, Vibration measurement instruments
