The V555 shaker will operate in the frequency range of DC to 6300Hz from either ...
The V830 Electrodynamic Shaker is designed for ...
The V650 is designed to reproduce a vibration environment. Qualification tests on components ...
Model 086C01
Product Manual (831kb)
Modally Tuned® Impulse Hammer w/force sensor and tips, 0 to 100 lbf, 50 mV/lbf (11.2 mV/N)
Sensitivity: (±15%) 50 mV/lbf (11.2 mV/N)
Measurement Range: ±100 lbf pk (±444 N pk)
Hammer Mass: 0.23 lb (0.10 kg)
Model 086C02
Product Manual (831kb)
Modally Tuned® Impulse Hammer ...
Model 086E80 Replaces model(s) 086D80
Miniature ...
Air-cooled shakers are the workhorses for many component testing applications such as automotive assemblies and consumer electronics equipment. The Data Physics range includes many shaker models with axial guidance bearings and 2 inches (50mm displacement) and our largest air-cooled model offers 2.5 inches (63.5mm) continuous ...
SignalForce amplifiers provide very high levels of efficiency with superior levels of performance. These amplifiers occupy little space and are suitable for driving shakers from all manufacturers, as well as other laboratory applications.
EMC ...
The M series of modal shakers use linear bearings, in place of the more common suspension systems, to produce virtually zero axial stiffness and virtually zero mechanical damping. When combined with Data Physics’ linear amplifiers, operating in current mode, the resultant system force output will exhibit typically less than 1% electrical damping ...
The Air Cooled Series Vibration test systems are a versatile wide frequency range electrodynamic vibration test system which ...
Puma Revolutionizing Vibration Testing
PUMA (Cougar for portability) utilizes Spectral Dynamics' innovative Computer-Aided Test Suite™ (CATS) architecture. Both take full advantage of the PC's powerful Intel processor and Windows XP technology. Optimized for multi-tasking, and ...
Powerful workstation-based system for large scale Shaker Control, signal analysis, and MIMO Shaker Control
Shaker Control
Jaguar provides a full suite of closed loop Shaker Control applications with up to 98 control channels and over 500 response channels. Patented adaptive control techniques provide the highest levels ...
VibRunner - Measurement Hardware for Vibration Testing, Noise & Vibration Control and Process Monitoring
Tailored to the specific needs of noise & vibration analysis, vibration testing and dynamic data acquisition where numbers of channels and high data throughput are vital for accurate and efficient testing.
VibRunner is the new solution-oriented measurement hardware platform ...
Vibration Control and Complete Vibration Test Benches
m+p international's VibControl products for advanced vibration testing from 4 to hundreds of input channels are used by many of the leading environmental test laboratories throughout the world. In co-operation with renowned partners, m+p international provides complete vibration test stands including shaker and combined climatic ...
A powerful sound source designed for building acoustics measurements per ISO-140/4 Annex A (Field measurements). The source provides uniform sound radiation. When used with the power amplifier Nor280, the high sound power level ensures accurate ...
Reference sound source for Sound Power determination according to ISO 6926.
230V/50Hz or 115V/60Hz (specify when ordering).
...
TMC Modal Shaker
To provide the turnkey Modal test solutions to our customers,
TMC Solution produces the components for the total modal
test system,including the impact hammers,signal generators,
accelerometers,signal conditioners,modal shakers,modal
power ...
The compact vibration and rolling bearing monitor VibroGard-R 1500 is used for low cost monitoring, i.e. on electric motors, fans or pumps. Different ...
The ARA Façade Source is a loudspeaker designed for on-site measurements of airborne noise sound isolation. Thanks to is neodymium magnets, the ARA speakers provide high sound pressure levels while remaining light in ...
The MI005 is a standardised (ISO 140) Tapping Machine designed to generate normalised impact noise for laboratory and field measurements of the impact sound insulation ...
Spider-81 is a highly modular, distributed, scalable vibration control system developed by Crystal Instruments. It represents the fourth generation of vibration control systems because its advanced technology is not seen in any other ...
Impulse Hammers
Model Number: 5850B
Item: MULTIRANGE ...
Endevco modal impact hammers feature an ISOTRON® impedance converter that provides an IEPE-type output, compatible with most FFT analyzers and data acquisition systems, and are designed to properly excite structures in modal and structural analysis applications.
Use ...
NTi Audio TalkBox greatly simplifies the acoustical feed of the STI-PA intelligibility test source signal into closed sound reinforcement systems. It presents the standardized voice-like acoustical signal emission simulating a human talker according to IEC 60268-16, combined ...
2.0 J Impact Hammer
Product Details
* 1250 g body includes release mechanism and striking element guide.
* 250 g striking element comes with cocking knob and hammer ...
The F22.50 uses adjustable energy levels to allow the full range of test settings. This product is a Complete Impact Test Apparatus ...
