|
|
ELPRO datalogger series ECOLOG-NET are designed for recording temperature and relative humidity via a network.
The data is stored in the internal memory and can be loaded to the PC via the LAN network. The system offers the very highest of data safety as the datalogger continues logging for months even in the event of a power failure running from its own internal lithium battery. Multiple level alarm features are built in for local or network alarming in for any user set out of range conditions.
|
|
multiparameter sensor MPS-D8
13 parameters can be measured: water level, °C, conductivity, salinity, O2, pH, ORP, NH3, NO3-, Cl-, NH4+, Na+, Ca2+, F-, K+ and turbidity. For use with data logger MDS-5.
|
|
Temperature Control with the data logger "Penguin"
- available in two variations
for temperature (16.000 measuring values)
for temperature and humidity (32.000 measuring values)
- Measuring range temperature: -40°C to 80°C
- Measuing range humidity: 0 to 100% RH
- High accuracy
- Infrared Interface
- Easy Programming
- Various programming possibilities
Just have alook at our Online-Shop:
www.temperature-shop.eu
Here you will also find information about our further data loggers and product range all around the temperature measurement:
- Temperature Sensors
- Temperature Humidity Sensors
- Thermocouple Connectors
- Temperature Measurement Instruments
- Digital-Thermometer
- Infrared Thermometer
- Data logger
- Recorders
- stationary Pyrometers
- Controllers
- Indicators
- Transmitters
|
|
Data Logger - Series BDL
Measure Temperature, Stores up to 2,048 Readings
Data Logger - Model MTL10
Measure Temperature, Stores up to 2,048 Readings
Data Logger - Model DL-8T
Measure Temperature, Stores up to 1,048,000 Readings
Data Logger - Model DL001
Measure Temperature, Stores up to 32,768 Readings
Data Logger - Model DL-PRT150
Measure Temperature, Pressure, or RH, Store up to 87,000 Readings, 4-Channel
Data Logger - Series DL6
Measure Temperature, Pressure, or RH, Store up to 32,768 Readings, 5-Channel
|
|
|
|
|
|
UR C30 Controller System
Digital Controller for Bay Control and Substation Automation
Protection and Control:
User-definable protection functions
Programmable logic, timers, counters
Distributed logic, remote I/O expansion
Up to 96 digital input and 64 digital outputs)
Transducer I/Os (RTD, dcmA)
Monitoring and Metering:
Oscillography - 64 samples/cycle, up to 64 records
Event Recorder - 1024 time tagged events, 1 microsecond
resolution
DataLogger - Up to 16 channels with user selectable
sampling rate:
User Interface and Programming
Front panel display and keypad for local access; RS232 port for local PC access
User programmable local display, LEDs and pushbuttons
Customize protection and control functions with FlexLogic,
FlexCurves, and FlexElements:
Includes EnerVista LaunchPad - Simplified relay setup and programming
Multi-language - French, Chinese, Russian option
Communications:
Networking options - Ethernet-fiber (optional redundancy), RS422, RS485, G.703, C37.94
Multiple protocols - IEC 61850, UCA 2.0, DNP 3.0, Modbus, IEC-104, Ethernet Global Data (EGD)
Direct I/O - exchange of binary data between URs
|
|
|
|
|
|
With or without display, compatible with extreme temperatures (very high and very low), the new range of KISTOCK dataloggers lets you monitor (continuously or on-demand) your manufacturing process, storage premises, transport chain...
With these new accurate and self-contained dataloggers, you can store from 16,000 to 100,000 measurement points (temperature, humidity, light, current and voltage); they are compatible with external probes (up to 4):
- humidity-temperature (thermocouple K-J-T, Pt100),
- ammeter clamps,
- 4-20mA and 0-10V
When connected to the USB port of your PC and when configured in ONLINE mode, the KISTOCK becomes an acquisition system, allowing you to measure 5 parameters simultaneously, in real-time.
KILOG work on batteries, which can be replaced when required. You can configure the working mode, display mode, LED status, recording duration…
One click and you can quickly download data (1000 points per second) from your KISTOCK (or from the Data Recorder). Once the data have been automatically saved, you can process data with clear and accurate tables and graphs.
Join our distribution network all over the word....Contact us !
|
|
|
|
|
|
Libratherm offers Microprocessor based Temperature and Humidity Scanner / Data logger Model HTLOGGER, designed for monitoring temperature and humidity at various locations or at various points in the stability chamber or in the walk in chamber or other identical systems.
HTLOGGER is a 16 channel data logger and it can accept 8-Temperature and 8-Humidity input from the std. RTD (Pt-100) temperature sensor and from the capacitive type RH sensor. The instrument displays the temperature in the range 0.0-100.0 oC and humidity in the range of 0.0 - 100.0 % RH on 4 digit 7-segment Red LED display with respective channel number along with the respective unit of measurement.
In addition to this the HTLOGGER has many other useful features such as Separate display to indicate Real time clock / calendar. In-built data storage facility, which can be retrieved on demand or can be down loaded on to a computer or on a printer for hard copy via the printer port in both off line and on line mode. The data storage capacity depends on the logging time and the number of channels. Internal 128KB of memory allows 3000 records of storage for all 16 channels.
The HTLOGGER is provided with a Serial communication port RS 232 / RS 485 for interfacing to a computer for data logging and storage. Specially designed window based software does the on line data logging and plot the graph with respect to the time on the PC. Special 2 level Pass Word protection (operator & supervisory) for unauthorized tempering of the parameters is also provided.
|
|
|
Quest Technologies offers a variety of thermal environmental and WBGT heat stress monitors. Datalogging heat stress monitors also available.
|
|
HOTBOX HTH Part No.: 2601
- Stand-alone datalogger for temperature and rel. air humidity
- Robust aluminum casing
- Memory capacity for 64,000 measured values
- Constant temperature +95°C, peak temperature up to +105°C
- rH: 0..100%
- 1 external temperature probe (NTC): -50°..+140°C
- Including factory certificate
|
|
DATA LOGGER KLIMA I, portable instrument with integrated temperature and air humidity sensor, equipped with interface for PC and long-life lithium battery.
Ideal for monitoring living rooms and workrooms, museums, warehouses, etc. Not recommended for outdoor use or at constant high air humidity
|
|
The HOBO Pro v2 External Temperature/Relative Humidity Data Logger is a weatherproof data logger with an external Temperature and Relative Humidity sensor on a 6-foot cable for fast sensor response and deployment in tight spaces. The Relative Humidity sensor features fast response and superior durability in humid environments, and is user-replaceable.
Features:
- Weatherproof housing for use in outdoor or condensing environments
- High accuracy
- Replaceable Relative Humidity sensor provides fast response and superior recovery from condensing conditions
- Small-diameter external sensor versions for measurements in tight spaces
- Optic USB interface for fast and reliable download
|
|
|
Tecnosoft dataloggers series has also instruments for temperature and relative humidity measurement. These instruments, as all Tecnosoft systems, feature a high precision and are very easy to use. They can be provided with a SIT (Italian Reference Center for measurement) traceable calibration certificate.
|
|
All analog inputs fully isolated!
Voltage/temperature loggers with PC networking support
8420-51(8ch), 8421-51(16ch), 8422-51(32ch) All analog channels isolated.
Temperature, voltage, humidity, cumulative pulses, rotations
Max. 32-channel, 100ms high-speed multi-channel data collection
Simultaneous numerical and graphical display
Attachable Printer and I/O Module
Up to 16 HiLOGGERs can be connected and controlled via LAN.
|
|
Pico supplies a range of easy-to-use PC-based temperature and humidity data logging products. Designed to replace costly chart recorders and complicated "plug in" data acquisition boards, these devices simply plug into a port on your desktop or laptop PC and do not require a power supply.
-Easy to install and use
-No power supply required
-Supplied with data logging software
-Low cost data acquisition systems
-Multiple data loggers (in any mix) can be used on a single PC
|
|
|
|
|
|
HUMLOG 10
Data logger for humidity and temperature
HUMLOG 10 series humidity/temperature data loggers permit the exact and professional recording of humidity and temperature values. Low power consumption and large memory size enable long-term data capture for a wide range of applications.
HUMLOG 10 / HUMLOG 10TSE:
The elegant 2-part housing, which consists of a display module and a plug-in sensor module, enables easy installation and a fast exchange of the sensor unit when service is required.
The current measurement data on the large display is easy to read even from a distance of several metres.
HUMLOG 10THC:
The compact HUMLOG 10THC version does not have a display and is equipped with internal H/T sensors.
Measurement Data - Evaluation & Configuration:
Measurement data evaluation and instrument configuration can be conveniently performed via the serial RS232 interface with a PC or notebook computer by means of the Smartgraph TM 2 software, which runs under MS Windows TM.
Smartgraph TM 2 can display the recorded measurement data in graphical form or as a table. The layout of the display can be individually configured by the user.
|
|
ShockWatch temperature recorders give you the ability to monitor and record temperature and humidity to ensure acceptable environmental conditions for your sensitive goods.
The DataScribe RH52s device monitors and records temperature and humidity through a linear dual channel. Its small size and built-in sensors allow it to go where no other logger can, which enables it to be easily concealed for added security. Despite the small size, this device is accurate, reliable, and has a large memory capacity. Accuracy is an impressive +/- 1 degree F and +/- 3% RH guaranteed. The quality of the RH sensor is unaffected by condensation, immune to most reagent vapors, has a fast response time, and has excellent long-term stability. The large memory and long battery life make this device ideal for remote applications. It records up to 16 months of hourly readings in protected memory, ensuring that you don't lose your data if the battery is removed.
|
|
8-channel, Web-enabled temperature measurement modules :
- WEB-TEMP supports J, K, R, S, T, N, E,
& B type thermocouples, 2-, 3-, or 4-wire RTDs and thermistors,
and semiconductor temperature devices
- WEB-TC supports thermocouples only
- Built-in ambient CJC temperature sensor
- Independent temperature inputs
- Built-in Web server/Web page
|
|
The HOBO U12 Stainless Temperature Data Logger is ideal for food, pharmaceutical, autoclave, and other applications where high-accuracy temperature data is critical. With its broad temperature range (-40 to 125C) and food-grade stainless steel housing, the U12 Stainless Temperature Data Logger withstands process conditions from pasteurization to flash freezing and washdown. The U12 Stainless is also ideal for high-temperature or deep underwater applications.
Features:
- Food-grade 316L stainless Temperature data loggers
- High-accuracy, extended temperature range
- Suitable for high pressure applications to 2200psi
- Fast readout via direct USB interface
|
|
|
|
|
|
HUMLOG 10 series humidity/temperature data loggers permit the exact and professional recording of humidity and temperature values. Low power consumption and large memory size enable long-term data capture for a wide range of applications.
HUMLOG 10 / HUMLOG 10TSE:
The elegant 2-part housing, which consists of a display module and a plug-in sensor module, enables easy installation and a fast exchange of the sensor unit when service is required.
The current measurement data on the large display is easy to read even from a distance of several metres.
HUMLOG 10THC:
The compact HUMLOG 10THC version does not have a display and is equipped with internal H/T sensors.
Measurement Data - Evaluation & Configuration:
Measurement data evaluation and instrument configuration can be conveniently performed via the serial RS232 interface with a PC or notebook computer by means of the Smartgraph TM 2 software, which runs under MS Windows TM.
Smartgraph TM 2 can display the recorded measurement data in graphical form or as a table. The layout of the display can be individually configured by the user.
|
|
|
|
|
|
Product Guide
Temp. and Humidity recorder TR-71U/TR-72U
Single Temperature datalogger + Timer DTM-317
Daul Temperature datalogger DTM-318
0 °C ~ 50°C+/-3°C; 10 ~ 95% +/- 5%
USB Connection
One Year Continual
Use on One Set of Batteries
Simultaneous Monitoring of Multiple
Channels of Data
High Speed Data Transfer
Large Data Capacity: 8,000 Readings X 2
Channels
Adjustment Function
Accurate, Compact,
Lightweight and Affordable
Easy to Read Multi-Functional Display
Humidity/Temp Meter w/Dual Input
Model : DTM-321/DTM-322
Temp:-20°C ~ 60°C (-4°F ~ 140°F ); K-type:
-200°C ~ 1,370°C (-328°F ~ 2,498°F);
Humidity: 0 ~ 100% RH
4 Digit, Triple display.
K-type Termocouple.
Reading hold °C or °F annunciators.
MAX, MIN. function.
Auto power off.
ÄREL function. (DTM-321)
Automatic low battery indication.
RS-232 computer interface.
RS-232 cable and software for Windows( DTM-
322).
TR-71W Web Temperature Data Logger (USB)
TR-72W Web Temperature / Humidity Data
Logger (USB)
About the TR-7W Series Web Viewer
View Reading on a Cell phone
Recording Settings Monitor Current
Readings
Downloading Recorded Data Graph
Send Warning Messages by E-mail Main
Unit Settings
Wireless Lan Option Brings Flexibility &
freedom
Compact / Lightweight / Water Resistant!
No Switches means No Fuss / No Mistakes /
No Tampering
Wide Temperature Measuring Range:-60°C
to 155°C
Two Types to meet your Needs
Large Data Capacity: up to 16,000 Readings
Battery Life Good for up to
Two Years of Continued Use
Wide Selection of Recording Intervals
|
|
The DRAABE HumSpot steers and supervises the humidification of the individual zones (e.g. different areas, work areas). The simple menu guidance and the lit color display guarantee high convenient operation. Their advantages:
• Point-exact activation of the air moisturizers on falling below of the adjusted dampness desired value
• High measuring precision by digital, capacitive dampness measuring technique
• Permanent status indication of relative dampness and ambient temperature
|
|
Datalogger ECOLOG TH1
- Connection for 1 integrated (-35°C ..+55°C; 0% ..+100% rH) orup to 2 external humidity and temperature probes (-35°C ..+70°C; 0%..100% rH) orand second temperature probe(-50°C..+140°C)
- Calibrated, exchangeable humidity and temperature probes
- Memory capacity for 64,000 measured values
- Large display with alarm information
- Key pad with 4 keys, external start, alarm reset, measured value and alarm scroll
- 1 digital input
- DB15 multifunction connection with alarm output and RS232
- Direct printout of measured values and alarm data at printer
- Ecolog TH1 with white housing Part No.: 2423-W
- Ecolog TH1 EEX with approval for EEX zone 1
|
|
Data logger HygroGuard 10 / 20
- Complete, battery powered, ready to use data logger system
- Included data acquisition/configuration software
- Included data transmission cable
- High storage capacity of 120'000 data points
|
|
|
|
|
|
The Commeter C and D series comprise multi-channel, lightweight instruments for the measuring of temperature, relative humidity, dew point, atmospheric pressure, etc. The Commeters are battery-operated and are ideally suitable for a wide range of applications in the heating, ventilation, and cooling areas. Because of their \"state of the art\" design, the meters are very user-friendly. The large, dual LCD screen is very convenient and minimises the risk of reading errors.
All functions, such as alarm and storage of minimum and maximum values, are easy to setup using the ‘menu’ function key. The Commeters are supplied with a 9VDC battery, manual and a convenient storage case (D series with recorder only). A battery charger is optionally available.
The exclusive Commeter series D distinguishes itself from other measuring instruments by it’s advanced recorder function. The D series has a real-time clock and stores the measured readings in its memory with a date and time stamp. There are three recording variants programmable; manually (the user can place readings in memory by hand), first-in-first-out (the oldest readings will be overwritten when the memory is full), and finally stop-when-full (the recorder stops collecting data when the memory is full). Using the 3.5mm jack connection, the Commeter can be connected to the RS232 port of a PC, so that the recorded data can be transfered, processed, analysed, and printed out at any desired moment.
|
|
The long term recording of humidity and temperature conidtions is very important in storage, shipping, production processes, test facilities and many other areas. Once logged, the temperature and humidity data can be evaluated statistically. This provides valuable information on conditions that can have an influence on people, materials and objects.
The ROTRONIC data loggers fulfil the requirements of FDA 21 CFR Part 11 and GAMP 4. They have a degree of functionality currently not achieved by any other logger while being highly accurate and easy to use. Data can be shown in graph or table form. A large range of interchangeable probes means simple maintenance and flexibility in different applications, and loggers are available in a range configurations to suit most uses.
Applications
Warehouses, museums, libraries, art galleries, clean rooms, server rooms, factories, shipping, residential properties
|
|
EL-USB-RT
- -20 to +70°C (-4 to +158°F) Measurement Range
- 0 to 100%RH Measurement Range
- Dew point indication via Windows Control Software
- USB Interface
- User-Programmable Alarm Thresholds for T & RH%
When plugged into the USB port of a PC installed with the purpose designed software under Windows XP and Vista(32-bit only), EL-USB-RT measures temperature and relative humidity from -20° to +70°C (-4° to +158°F) and 0 to 100%RH. The PC displays the temperature, humidity and dew point(the temperature at which water vapor present in the air begins to condense) in real-time and saves it to a file which can store up to 7 day's worth of data.
This data file is overwritten at the beginning of each new logging session. The software provides the option for the user to save the data file permanently to the hard-drive. Temperature, relative humidity and dew point can be graphed, printed and exported to other applications.
|
|
|
|
|
|
EL-USB-2-LCD
- LCD display shows high/low and last readings
- Humidity/Temp USB data logger
- Calculated dew point
- Free configuration software
- User-selectable alarm thresholds
This standalone data logger measures and stores up to 16,379 relative humidity and 16,379 temperature readings over 0 to 100%RH and -35 to +80°C (-31 to +176°F) measurement ranges. The user can easily set up the logger and view downloaded data by plugging the module into a PC's USB port and using the supplied software. Relative humidity, temperature and dew point (the temperature at which water vapour present in the air begins to condense) data can then be graphed, printed and exported to other applications.
The high contrast LCD can show a variety of temperature and humidity information. At the touch of a button, the user can cycle between the current temperature and humidity, along with the maximum and minimum stored values for temperature and humidity.
The data logger is supplied complete with a long-life lithium battery, which can typically allow logging for up to 1 year.
|
|
|
|
|
|
MCC has announced the addition of two battery powered temperature dataloggers to its growing datalogger line. These battery powered dataloggers are offered in two models: the USB-501 for remote temperature logging, and the USB-502 for remote temperature and relative humidity logging. These products are the perfect, cost-effective solution for long or short-term data logging applications. Both the USB-501 and USB-502 log up to 16,382 temperature measurements in the -35 to +80 ºC (-31 to +176 ºF) range. The USB-502 additionally supports up to 16,382 additional relative humidity measurements over the full 0 to 100 percent range. Rates for both dataloggers can be set from 10-second to 12-hour intervals. The loggers plug directly into a standard PC or laptop USB port for setup and data download. The included USB-500 Series Data Logging Application software supports both products. This user-friendly, intuitive software is used initially to configure the loggers, program alarm thresholds, logging rates, start times, and measurement units. When the loggers are retrieved from the field, the software provides simple one-click access to download, display, and export the data.
With the included USB-500 Data Logging Application software, the user can display time-stamped temperature, relative humidity, dew point, and alarm limits on a powerful strip chart graph. The data can also be downloaded to a text or a .csv (comma separator values) file. Supporting these file types allows users to easily export the logged data to Excel. With one mouse click, spreadsheets and reports are easily generated. The software and USB-500 series dataloggers are compatible with Windows 2000/XP.
|
|
|
|
|
|
- Temperature, Temperature/RH/Dew Point, Voltage and Current Models
Windows Software Included
- Datalogger Plugs Directly into Computer 's USB Port for Easy Setup and Data Download (No USB Cable Required)
- User-Programmable Alarm Thresholds with LED Indicators
- Bright Red,Green and Orange LED Indication
- Low Battery Warning
- IP67 Protection
The OM-EL-USB Series of data loggers includes models for temperature, temperature/relative humidity, voltage, and current measurement. The user can easily set up the data logger and download the stored data by plugging the module into a PC's USB port and running the easy-to-use Windows software. Software-selectable setup parameters include logging rate, start-time, high/low alarm settings, and temperature units (°C or °F). Data can then be graphed, printed, and exported to other applications such as Excel. Each data logger is supplied complete with a long-life lithium battery. Built-in LED indicators show data logger status. OM-EL-USB Series data loggers are protected against moisture to IP67 standards when the protective cap is fitted.
|
|
|
|
|
|
myDatalog Mobile
Independent operation even at most unfavourable conditions enables an extremely cost effective and maintenance-free measurement network without compromises.
Application
Portable measurement instrument to acquire and record analogue and digital signals from a standardised interface, to be used in:
Sewer systems
Industries
Public water and sewage systems
Product Characteristics
ATEX-certified for zone 1
Automatic reconfiguration upon exchange of instruments
Measurement sites may be managed from anywhere around the world via the internet
Data storage on the instrument of up to 440.000 measurements
Adjustable measurement and transmission intervals
Real time clock synchronised with server
Extraordinary battery lifetime of up to 5 years - MicroPower® technology
Compact dimensions
Rugged IP66, IP68 casing with high resistance against chemicals and with a protective rubber outer sleeve
Ultra low costs for start-up and operation
Measurement Examples:
Level, temperature air/water/surface, flow, rainfall, weather station, relative humidity, pH, conductivity, CSB, pressure
Standard Interfaces:
0-20mA, 4-20mA, frequency, daily counter, continuous counter, RS232, RS485, Hart
|
|
|
|
Environmental data-loggers: Temperature / humidity data-loggers ...
