|
|
|
|
|
|
Universal III
509-7X Series Transmitter using 409-1000 Series Electronics The Universal III provides advanced internal Admittance circuitry that enables the system to ignore significant process coating deposits on the RF sensors.
Smart Check Well
509-7X Series Transmitter using 409-1000 Series Electronics The Smart CheckWell provides capability of water well measurements to 800 ft. depths.
RCT RF
RCT 10, 11, 12, &, 13 Series Transmitter with HART Protocol using 409-T Electronics The RCT Series provides advanced internal Admittance circuitry that enables the system to ignore significant process coating deposits on sensors.
Universal Lite
509-1X Series Transmitter using 409-1400 Series Electronics The Universal Lite provides cost effective measurements on liquid applications that do not leave a significant process coating deposits on sensors.
True Level
509-8X Series Transmitter using 409-2000 Series Electronics The True Level III provides the ability to provide accurate measurements on homogeneous (blended) liquids.
Drop-In-Displacer²
509-7X Series Transmitter with HART Protocol using 409-1000 Series Electronics The Displacer² provides the ability to replace maintenance intensive electrical or mechanical displacer assemblies with alternate technologies such as RF Admittance.
SLT II
509-5X Series Transmitter using 409-1200 Series Electronics The SLT II Series provides advanced internal Admittance circuitry that enables the system to ignore significant process coating deposits on the RF sensors.
|
|
CONTINUOUS LEVEL MEASUREMENT
capacitive level probes for liquids and bulk materials in high-grade steel or plastic
Exit 4-20mA,
for vertical installation,
for aggressive media,
Remarks with removable head and exchangeable or shortenable probe staffs
|
|
|
The CS001 RF Capacitance Transmitter offers a compact and affordable solution to a wide variety of level sensing applications. With 4-20 mA and 0-5 VDC or 0-10 VDC selectable outputs, the solid state sensor provides accurate, proportional level measurement in many extreme process temperatures and fluid conditions. The CS001 features a simple, fully programmable four button calibration to set for whatever media it is measuring. Its 316 stainless steel probe comes in lengths up to 120" and is available in NEMA 4 or explosion-proof housings.
|
|
|
The capcitive filling level systems operate according to the three-electrode principle. With this principle the container or an additional electrode serve as a counter-electrode to the probe electrodes. For this reason it is necessary with this system that the container is of a conductive material or a "substitute electrode" is fixed to the container wall, e.g. copper foil. These systems are available with probes for analogue filling level measurement of for detection of 1, 2 or 3 measuring points. The position of the switching points and the analogue measuring area is user-definable within the possible effective range and therefore it can be determined for optimal matching of each application. Level measurements of bulk material, liquids or pastes are possible with a dielectric constant as of år 1,1.
|
|
Our unique inverse frequency-based approach to capacitance technology ensures accurate, reliable and repeatable measurement even in dusty, turbulent, and vapourous environments, or in situations with product build-up. Because even a small level change creates a large change in frequency, our instruments provide better resolution and consistently outperform conventional devices. With special features such as Active Shield technology and modular probe options available on various models, they offer practical solutions to a wide variety of continuous level measurement challenges.
SITRANS LC 300
Capacitance level measurement instrument for liquids and solids, high accuracy applications such as food and beverages, pet food and bulk solids; ideal for challenging processes involving vapor and dust.
SITRANS LC 500
Capacitance level and interface monitor/controller for extreme and critical process conditions, such as oil and "liquid gas", toxic and aggressive chemicals and vapors.
|
|
|
|
|
|
The SC120 probe and CN200 level transducer can continuously measure as well as control the level in a wide range of applications. They can be used in conductive and non-conductive liquids, solids such as grains and feeds, as well as slurries. The SC120 probe sends an mV signal to the CN200 transducer, which converts the (mV) signal into a 4-20mA signal. Unlike the SC 404, the SC120 working with the CN200 transducer has two adjustable level controls in a scale of 0-100% with bar graph level indication, as well as a Zero and Span adjustment.
FEATURES
*Wide range of applications/industries
*I.e. liquids, oils, corrosives, solids such as powders and grains, etc.
*Functions on conductive as well as non-conductive medias
*No moving parts, rugged construction
*Easy economical installation, accurate and reliable measurement
*Unaffected by coating media or aggressive products
*Can operate ate high temperatures and pressures
*Available in 316S.S. threaded, sanitary and flanged process connections
*3A approved
Sitron's SC120 probes and CN200 transducers provide reliability, easy of use and installation.
|
|
LLS 20160 DIGITAL fuel level sensor for vehicle tracking and telematics
Fuel level sensor LLS 20160 is intended for determining the level of light oils and other liquids in metal and non-metal vessels. Fuel level information is transmitted to on-board equipment of monitoring systems periodically or upon request.
The main features of the fuel level sensor LLS 20160:
- probe length from 100mm to 3000mm
- adjustable length in field conditions
- long-term stability of measurements
- built-in galvanic decoupler
- interfaces RS-232 and RS-485
- resolution 1023-4095 points (adjustable)
- data transmission rates from 1200 to 115200 bps
- powered from on-board power system, power supply 7-50 VDC
|
|
|
Resistive sensors emit a virtually linear and continuous signal which, controlled by a suitable instrument, indicates the level of fluid in a tank
|
|
Fuel level sensor DUT-E is designed for precision fuel level measurement in tanks of vehicles, tractors, fixed installations. Fuel sensor DUT-E is mounted in the standard hole of fuel level sensor or in the special hole in vehicle fuel tank.
Fuel level sensor DUT-E is to be used together with Fuel Monitoring Systems, Fleet Management Systems, GPS tracking systems, AVL Systems.
Advantages:
- Allows cutting “at place” up to 30% of initial length without recalibration
- Hermetic case made from cast duralumin
- Protection of sensor output from short circuit
- Protection from voltage overload (up to 50 V)
- Electrical noninteraction with tank body
- Possibility of sealing
|
|
Gill Fuel Level Sensors use capacitive technology to accurately sense the level of fuel. The sensors have no moving parts and are ideal for use in extreme environments. All sensors feature fully integrated on-board electronics so there is no need for additional bulky electronic modules. The sensors are factory calibrated in the applicable fuel and are provided with our free ProbeMON calibration software to allow you to re-calibrate the sensors to your requirements.
Our fuel level sensors will operate to temperatures of 125°C and are compatible with all grades of:
- Petroleum
- Gasoline
- JetA
|
|
These are used where it is necessary to control with a high degree
of security the level of non conductive substances both liquid
and solid.
They are particularly used for controlling the level in silos for
cereals and foodstuffs, in feed plants, foundries and cement
works.
They function in the vicinity of the material to be controlled.
-Supply voltage 24 Vac or 110/220 Vac
-Relay output with 1 pole changeover from 5A to 220 Vac.
-Led incorporated
-Sensitivity adjustment
-Selector of min/max level
-SC series with power supply-amplifier incorporated within probe
-SCD series with power supply-amplifier separated from probe
-SX2 type with power supply-amplifier in plastic body
-Bar electrodes of teflon in standard lengths of 300/500/800 mm
-Plastified cable electrodes in standard lengths of 1/2/3/4
metres
-Housing in aluminium alloy with threaded fitting 1.1/2 inch GAS
|
|
The capacitive working LevelCheck 350C builds up a high-frequency, electrical field over the sensor surface.
If materials touches or is close to this field, the electrical field changes and the electrical signal changes within the sensor.
This is converted into a switching process. The sensitiveness of the sensor can be adjusted continuously to the adaptation
to different products.
|
|
OptiLevel is the leading edge system for liquid level measurement in smaller storage tanks. The OptiLevel tank gauging system is the best choice for your above and underground storage facilities.
The OptiLevel tank gauging system can be used for all applications in petroleum and petrochemical installations.
The state of the art HLS 3010HF level sensor and designed system architecture enable open interfacing to the Entis Inventory systems and other protocols.
|
|
Fully insulated, capacitive rod electrode for level measurement
For use in conductive liquids
All advantages in an overview:
- robust and maintenance-free
- easy installation and mounting
- measurement along the complete probe length
- insulation thickness 2 mm
- instrument from the plics® family
Version rod: - fully insulated
Insulation: PE, PTFE
Length: 0.1 ... 6 m
Process fitting: thread from G¾A
Process temperature: -50 ... +200 °C
Process pressure: -1 ... +64 bar (-100 ... +6400 kPa)
|
|
Level sensors are used to detect the level of liquids. In contrast to mechanical limit switches the switch points can be freely selected within the measuring range. One level sensor can replace up to four binary switches. Another advantage is direct level indication on the display. Adjustment to the medium is done automatically. The sensor is suitable for many liquid media.
> Reliable function even in coolant applications
> No time-intensive cleaning of mechanical components
> One sensor for all media – no adjustment necessary
> Selectable switch points for applications as required
> Direct level indication by LED display
> Modular concept saves time and money
|
|
|
|
|
|
Ink Level Sensor, Adblue Level Sensor, LAB Level Sensor, Paint Sensor
The 'other' level sensors categorises liquids not covered by our 'fuel', 'oil', 'bio-fuel' or 'water' level sensors categories. Our level sensors will work with most fluids, using capacitive technology to accurately sense the level of the liquid. The sensors have no moving parts and are ideal for use in extreme environments. All sensors feature fully integrated on-board electronics so there is no need for additional bulky electronic modules. The sensors are factory calibrated in the liquid type and are provided with our free ProbeMON calibration software to allow you to re-calibrate the sensors to your requirements. We can produce sensors using alternative materials if the standard Aluminium, Stainless Steel and Titanium options are not compatible with your liquid.
Our level sensors will operate to temperatures of 125°C and are compatible with most fluids:
- Ink
- Adblue
- LAB
- Paint
We offer two ranges of level sensors, 'M-Series and 'R-Series'. An M-Series sensor is fully custom designed to your requirements, an R-Series sensor is our standard design, available at any custom length.
|
|
Products Level Measurement - Capacitive level sensors
All of the capacitive level sensors are now available with automatic calibration should the overall length need to be changed.
The required length can be easily adjusted by the user. Once the length has been shortened the unit will require to be re-calibrated. This is now very simple, just requiring the "Zero Adjustment" button to be pressed with the tank empty and the "Maximum Value Adjustment" button to be pressed with the tank full. The calibration is then done automatically by the integrated micro controller.
The advantages of these level sensors includes the ease of adjustment, voltage or current outputs, extremly robust by virtue of the coaxial measuring principle and a 2" BSP head. Additional switching points are available optional.
|
|
Limit switch made of plastic for liquids and bulk goods
CPS 01
Features:
Quick and easy setting via programming by keystroke
Electrical connection: Cable or plug M8
PNP transistor output Housing made of PP or PVDF
Make contact or break contact
Outstanding price-performance ratio
Functional LED display Small and compact
Thread BSP G½"
Description:
Immersing the CPS 01 into the medium will cause a change in capacitance in the electrical capacitor. The change in capacitance is detected by the electronics and the switching operation is initiated.
Adjustment to the corresponding medium is carried out with the help of a programming key (programming via keystroke).
Application:
Designed for level limit detection of liquids and powdery or fine-grained bulk goods.
|
|
|
The capcitive filling level systems operate according to the three-electrode principle. With this principle the container or an additional electrode serve as a counter-electrode to the probe electrodes. For this reason it is necessary with this system that the container is of a conductive material or a "substitute electrode" is fixed to the container wall, e.g. copper foil. These systems are available with probes for analogue filling level measurement of for detection of 1, 2 or 3 measuring points. The position of the switching points and the analogue measuring area is user-definable within the possible effective range and therefore it can be determined for optimal matching of each application. Level measurements of bulk material, liquids or pastes are possible with a dielectric constant as of εr 1,1.
|
|
The vessel, capacitance electrode and medium to be measured form together an electrical capacitor. The level change is monitored as a direct result of the variation in capacitance value around the probe, dependent upon the degree of immersion.
Advantages
- Rugged sensors suitable for universal applications
- High chemical resistance
Applications
- Level measurement and level detection of liquids and solids
|
|
|
|
|
|
High frequency microwave impulses are coupled to a cable or rod and guided along the probe. The impulses are reflected by the product surface and received by the processing electronics.
Due to this measuring principle, the comprehensive adjustment with the product is no longer necessary. The instruments are adjusted to the ordered electrode length. The shortable cable and rod versions are suitable for individual adaptation to the local conditions.
Even process conditions such as high dust and noise generation or strong steamy atmospheres do not influence the accuracy of the measurement.
Density fluctuations, different granulation or even fluidising do not influence the accuracy. This applies also to the change from dry to wet gravel.
Strong build-up on the electrode or on the vessel wall does not affect the measuring result.
With measuring ranges up to 30 m, the sensors are also suitable for high vessels. Temperatures up to 150°C and pressures from vacuum up to 40 bar cover a wide application range.
By using a coaxial guide tube, VEGAFLEX 65 operates completely unaffected by vessel installations such as e.g. heating spirals or struts. A special adjustment is not necessary.
|
|
Level sensor acc. to the measuring principle of the guided microwave (TDR)
For universal use in heavy solids and liquids
All advantages in an overview
- setup without adjustment
- independent of product features
- insensitive to dust, vapour and buildup
- probe can be shortened
- signal processing ECHOFOX for echo analysis with Fuzzy-Logic
Version: with exchangeable cable (ø 6 mm) or rod (ø 16 mm)
Measuring range cable: up to 60 m; rod: up to 6 m
Process fitting: from G1½A
Process temperature: -40 ... +150 °C
Process pressure: -1 ... +40 bar (-100 ... +4000 kPa)
Accuracy: ±5 mm
|
|
Guided Radar (TDR) Level Meter
for distance, level and volume
of liquids, liquid interface, pastes and solids
OPTIFLEX
works better than any guided radar ever before
In contrast to earlier guided radar devices, the new OPTIFLEX with its more advanced design solutions has higher signal dynamics. Sharper pulses measure thinner interfaces. The very good time base stability allows better reproducibility, which translates to better trustability.
|
|
|
|
|
|
Eclipse® transmitters are loop-powered, 24 VDC, level transmitters based upon the revolutionary Guided Wave Radar (GWR) technology and can be utilized on virtually all level measurement and control applications.
Application conditions include processes exhibiting visible vapors, foam, coating or buildup, surface agitation, bubbling or boiling, high fill/empty rates, low level and varying dielectric media or specific gravity.
In addition, Eclipse reliably handles interface level measurement and control applications with a clean distinct interface, including those with changing specific gravities and visible vapors.
Choosing the proper Eclipse probe is the most important decision in the application process. With this in mind, Magnetrol offers 19 probe designs to choose from.
Eclipse features IS, XP and Non-Incendive approvals, optional HART® or Foundation Fieldbus® communications, and quick connect/disconnect probe coupling.
Contact us to learn how these leading-edge transmitters provide performance well beyond that of many traditional technologies.
|
|
4-wire guided wave radar for small tanks (up to 2000mm)
Measurement is insensitive to ¡V
* Properties of the target Density, conductivity, dielectric constant
* Environmental conditions Pressure, temperature
* Physical obstacles, turbulent target, foam, built-up
* Continuous level measurement AND point level detection (with multiple switching points) in just one device
* Independent of liquid properties and installation conditions
* Ideally suited for small tanks: minimal blocking distance
* Simple single-button-operation/configuration
* No moving parts ¡V maintenance free
|
|
External display and adjustment unit
Suitable for external display of measured values and adjustment of the sensors
All advantages in an overview:
- digital and quasi-analogue display of measured values
- can be mounted up to 25 m away from the sensor
- inclusive PLICSCOM
- instrument from the plics® family
|
|
Sensortechnics is a leading manufacturer and distributor of a wide range of sensors and fluid control devices. The product portfolio includes basic pressure sensors, rugged transmitters, submersible level sensors and customised pressure sensing systems from 1 mbar up to 1000 bar as well as liquid level sensors and switches, flow, oxygen and force sensors. Additionally, Sensortechnics offers ultrasonic air bubble, air-in-line, liquid level and fluid monitoring detectors. Fluid control devices include miniature solenoid valves, diaphragm pumps and electronic pressure controllers.
Sensortechnics has more than 25 years of experience in providing highly customised sensing products and in the development of complex integrated fluid control systems for OEM customers worldwide.
|
|
LN Potentiometric Level Transmitter
A top mount insertion probe, the LN is designed with process control in mind. Ideal for filler bowls, balance tanks, and pressurized vessels, the LN is immune to pressure or temperature changes excelling in applications where pressure based sensors come up short.
Form AIC
|
|
Potentiometric level measurement
- Fields: Chemical and Petrochemical Industry / Food and Beverage Industry
- Type: LSP05x
- Measurement ranges: -20...140°C
- Operating pressure: max. 16 bar
- Type of protection: IP67
- Connecting head / Material: Head ø89 mm, W1.4301 (AISI304) / Wetted Parts, - W1.4404 (AISI316L) / 3A Approval
- Output signal: 4...20 mA
|
|
| ... products without technical information |
| |
|
|
Level sensors: capacitive, potentiometric, guided radar level sensors
