|
|
Two-channel Analyser, Collector, Balancer, Recorder
OneProd MVP-2C is an “all-in-one” modular system designed to improve the reliability of your machines through vibration analysis.
OneProd MVP-2C is equipped with a high-brightness colour screen and its user-friendliness favours users’ comfort and productivity.
Ultra compact, 2 x 40 kHz channels + trigger input channel, for the control and analysis of vibrations in industrial settings:
• FFT analyser,
• Data collector,
• Balancer,
• DAT recorder,
• Order analyser,
• Pyrometer (°C),
• Integrated laser-sighting tachometer (RPM).
Full set of tools for the detection and analysis of bearing defects (Bearing factor, Kurtosis, Envelope) – Automatic contactless identification of the measurement point – Communication through USB, RS232 and Internet (e-Route module). Exists in intrinsically-safe mode for measurements in areas where explosion hazard is permanent (zone 0).
|
|
|
The international community has recently drawn considerable attention to occupational vibration and it's detrimental effects on the human body. In response to these new developments, Quest has released the HAVPro personal human vibration monitor and the "New" VI-400Pro real time vibration analyzer.
|
|
Description :
The Virtual Corset™ has been described as "a gentle reminder to stand up straight". A more erect posture can reduce trunk muscle activity, and may reduce the loads borne by the spinal column.
By combining an inclinometer, data logger and silent vibrating alarm in a tiny pager enclosure, the Virtual Corset™ keeps track of trunk inclination, and warns the wearer when a prescribed inclination angle limit has been reached. The clinician or therapist sets the unit's inclination limits, sample frequencies, and data save intervals using the serial port of a personal computer (PC); once programmed, the Virtual Corset may be disconnected from the PC. In the field, it performs its pre-programmed datalogging and biofeedback tasks while worn anywhere: during work, play, exercise, and rest.
|
|
ShockWatch Impact & Environmental Recorders help monitor and record impact and shock vibration to your equipment, structures, and storage environments — ensuring protection from costly damage. Additionally, they provide an ongoing record of the environmental conditions of the product, equipment, or structure being monitored.
They provide ongoing monitoring of the intensity and duration of shock and vibration to large stationary or moving equipment, structures, and products. Tri-axial piezo-electric accelerometer technology is used to record impact direction, amplitude, and duration. Optional sensors also record changes in temperature, humidity, and atmospheric pressure.
The Micro ShockLog — RD317 records the date and time of up to 128 events, in addition to peak values of impacts at user-specified intervals. Optional accessories include a humidity sensor.
|
|
|
|
|
|
ShockWatch Impact & Environmental Recorders help monitor and record impact and shock vibration to your equipment, structures, and storage environments — ensuring protection from costly damage. Additionally, they provide an ongoing record of the environmental conditions of the product, equipment, or structure being monitored.
They provide ongoing monitoring of the intensity and duration of shock and vibration to large stationary or moving equipment, structures, and products. Tri-axial piezo-electric accelerometer technology is used to record impact direction, amplitude, and duration. Optional sensors also record changes in temperature, humidity, and atmospheric pressure.
The ShockLog records the date and time of up to 400 events. It has several unique features, making it especially suitable for applications in which the cost of exposure to out-of-specification environmental influences is very high. The instrument is equally convenient for protecting high-value fixed or mobile installations, or characterizing shock and vibration during transportation.
|
|
InfoLink® is a wireless fleet management system that monitors and communicates a wide range of essential fleet truck usage and performance information. Each truck is in continuous communication with the management team offering information on location, performance, operator productivity, unauthorised use and maintenance requirements.
InfoLink can be run on existing 802.11 Wireless LAN systems, eliminating the need for an expensive new data transmission set-up. All data is transmitted in real time to ensure immediacy of information.
The use of InfoLink will result in better decisions on fleet management. Companies and organisations can uncover accurate facts and performance on shift-working patterns that were previously much harder to define. Detailed reports provide insights into equipment use based on actual processes and functions.
InfoLink is another example of Crown’s commitment to delivering superior value at the lowest cost of ownership.
|
|
|
|
|
|
Off-line fuel monitor СКРТ 31 Lite is designed for data logging and displaying vehicle operational data, fuel monitoring and vehicle route tracking (option). Collected data are stored in non-volatile memory of the off-line fuel monitor CKPT 31 Lite.
Off-line fuel monitor CKPT 31 Lite is mounted on the dashboard in the driver’s cab. The controlled parameters can be displayed and checked either on the screen of the off-line fuel monitor on-board the vehicle or using an external personal computer. Standard sensors (speed sensor, engine speed sensor, ignition key position sensor) and additional sensors (fuel flow sensor DPT, fuel level sensor DUT-E) can be connected to the off-line fuel monitor CKPT 31 Lite.
In order to perform subsequent automatic data processing and detailed data analysis in the office Software “CKPT-Manager” is used.
Controlled parameters of CKPT 31 Lite:
- Fuel consumption
- Fuel level in tank
- Fueling volume and time
- Fuel discharge volume and time
- Traveled distance
- Traveling time
- Idle time
- Vehicle speed
- Engine speed (RPM)
- Motor-hours of operation
- Engine operating time
- On-board power supply
- Vehicle travel route according to GPS data (option)
Advantages of CKPT 31 Lite:
- Continuous real-time recording of vehicle operational data
- Automatic wireless data transmission to the personal computer (option)
- Numerous service functions for driver and manager
- Moderate price and fast payback
- Detailed documentation
- User-friendly and informative software
- Generation of reports in the form of texts, charts and diagrams
- Certificate of conformity (CE)
|
|
|
|
|
|
ShockWatch StartManager®: Equipment Access and Usage Monitoring
for Improved Forklift Safety and Fleet Management
By preventing untrained personnel from using specified equipment, the StartManager improves forklift safety and reduces damage-related costs in your facility while monitoring usage. The device reliably monitors and records operator identity so that if damage does occur, supervisors can determine accountability and respond promptly with necessary repairs or corrective action options. Optional software provides equipment access reports, which also help supervisors decide when to train additional personnel on certain equipment to ensure OSHA regulatory compliance.
The StartManager's usage reports also provide the information needed to improve fleet management. By monitoring the number of labor hours for each piece of equipment, you can make smarter decisions about when to rotate your fleet. Optimal equipment utilization extends the equipment lifecycle while minimizing costly downtime, repairs, and replacements that result from overuse.
Features Designed for Maximum Performance:
Monitors and controls access to equipment operation
Reports data via an iButton
Includes user-friendly software with client server and Internet capabilities
Works in conjunction with your preferred access device, including HID proximity card readers, iButton readers, or infrared readers
UL rating (pending) - Type E, EE, GS, LP, LPS, DE, and DS
CE-certified (pending)
|
|
|
|
|
|
On-line GPS tracking & Fuel monitoring terminal CKPT 45 is the perfect way for remote monitoring of a vehicle or fleet of vehicles.
Terminal CKPT 45 is designed for real-time GPS tracking and transmission of information about vehicle's operating parameters to the server. The device has a large number of inputs designed for standard and additional sensors.
The presence of CAN bus allows you to get the vehicle's operating parameters directly from the engine control unit. In order to monitor fuel consumption fuel level sensors and/or fuel flow sensors are used. Terminal CKPT 45 also allows using information from CAN bus to monitor fuel consumption.
Advantages:
- Record number of inputs
- Inputs are optimized for working with widespread vehicle sensors (frequency and voltage optimization)
- 2 outputs protected from short circuit
- Mechanical protection from unauthorized disconnections
- Accurate and reliable GPS-receiver Trimble
- Data transmission via GPRS and SMS both in home network and in roaming
- Extended temperature range
- Extended range of power supply
- Simple, reliable and efficient protocol of data transmission to the server
- Simultaneous work with several types of reports
- Possibility of remote control via SMS
- Data preprocessing directly in the terminal, providing optimal server loading as well as traffic minimization
- Strong metal case
Inputs:
- Engine speed (RPM)
- Vehicle speed
- Pulse signal detection
- Tank
- On-board power supply
- Oil pressure
- Engine temperature
- Outdoor temperature
- Indoor temperature
- Axle load
- Signal lamps
- Doors opening
- Locking of differential
|
|
| ... products without technical information |
| |
|
|
Data-loggers: Shock, Vibration, Fleet management
