|
|
AFV 966 S
• Sensing distance with glass fibre
• Supply : 10 / 30 VDC
• Output : PNP / NPN
• Friendly adjustment by key + / -
• Bargraph
Description :
• Simple adjustment
• Sensitivity bargraph
• Maximum and minimum sensitivity indication
• Keyboard lock
• Direct or inverse output
• Output : PNP / NPN
• Cable or M8 connector
• Polycarbonate strong housing
|
|
Features
Analog output 4 ... 20 mA
and switching output
Detection rang 2,5 mm resp. 20 mm
Fork opening 50 mm
High operating frequency
Light / dark switching
Metal casing
M12 metal connector
Protection class IP 67
Typical fields of application
Thickness measurement of tiny objects
Height measurement
Positioning
Contour measurement
Web edge control
Application for instance in packaging machines
|
|
Function
- edge detection, diameter recognition
Dimens. excluding plug, W x H x D, mm
- 26,6x81,5x91,5
- 20x155x91,5
Operating voltage
- 18 - 30 V DC
Outputs
- 3 x PNP
- 2 x analogue
- RS 232
- RS 422
- RS 485
Protection class
- IP 54
|
|
Color Mark Sensor DM-18T series
- Automatic color mark sensor with RGB light built in
- Easy setting by digital display with teaching function
- IP67
- Mark mode and Color mode are available
|
|
|
|
|
|
Registration Mark Sensors
Color sensors detect subtle color contrasts to inspect registration marks, using one, two or three color LEDs.
R58 Registration Mark Sensors
- Outstanding color contrast sensitivity; detecting contrasts as low as 2% over a wide range of colors
- Excellent performance in low-contrast or high-gloss applications
- Ultra-fast 10 kHz switching frequency (10,000 actuations per second); 15 µs repeatability
- Rugged, zinc alloy die-cast housing; rated IP67
- High-quality acrylic lens suitable for food processing applications
- Bipolar NPN/PNP with selectable light/dark operate (LO/DO)
- Two lens locations on each sensor and vertical or horizontal light spot, depending on model
R55F Fiber Optic Series
- Delivers outstanding color contrast sensitivity
- Reliably detects 16 levels of grayscale at up to 10,000 actuations per second
- Available in two fiber types: economical plastic for repeated flexing and glass for harsh conditions
- Offers choice of models with an infrared (glass only) or visible green, blue, red or white LED
- Provides 10 to 30V dc supply voltage with bipolar NPN or PNP outputs
- Features push-button programming for easy-to-set static, dynamic and remote TEACH
- Uses push-button for manual sensitivity adjustment
|
|
BFS 26K-PS-L01-S115
BFS0001
CadenasPath BFS Farbsensoren
CatalogProduct yes
Ordercode BFS0001
Connection M12 connector, 8-pin, 270° rotatable
Switching function light-on
Sensing face material PMMA
Housing material Impact-resistant ABS
Operating Range 20...35
Storage temperature min -20 °C
Storage temperature max +80 °C
Color tolerance ±6 mm at Tol. 3
Dimensions 50×50×17 mm
Emitter type pulsed white light
light spot 4 mm at 22 mm range
light spot geometry round
Recommended connector BKS-S139
Output LEDs CH1-3 3 × LED yellow
Output LEDs Tolerance 1-5 3 × LED red
Load current capacity max. (Ie) 100 mA
|
|
True Color Sensors
True color sensors accurately analyze and compare color to color or varying intensities of one color.
QC50 Series
- Available in two versions for application flexibility: QC50 models for most applications and QCX50 models for more challenging applications such as differentiating dark blue from black
- Accurately analyzes and compares color to color, or varying intensities of one color
- Features easy-to-set push-button programming options for one, two or three colors
- Delivers fast sensing with a response time of 335 microsecond for the QC50 and selectable 1 or 5 milliseconds for the QCX50
- Features compact, self-contained design
- Includes three programming parameters: channel, sensing mode and tolerance level
- Available in models with three NPN or three PNP outputs, one for each color channel
|
|
Verify the presence of targets that can be differentiated by color, faster and with greater control. A ColorMax-1000™ color sensor lets your machine see up to 15 colors and RGB intensity. What's more, innovative technology improves sensitivity and speed, so you can maximize the pace of manufacturing.
Recognizes 15 colors. Use fewer sensors. No need to reprogram when you change setups.
Traditional color sensors output only a "match/no match" condition, but the ColorMax™-1000 also outputs the analog values for each RGB reading. Now machines and operators can see not just which color, but how much color - enabling tighter control.
2 to 5 times faster sample speed - for fast manufacturing.
The only color sensor in an M30 package.
Highest resolution and repeatability specs in the industry.
Sophisticated algorithms ignore luster
PC-based configuration; lock out unauthorized changes
|
|
High Powered RGB Digital Fiberoptic Sensor CZ-V20
•SUPER HIGH POWER RGB sensor Industry's best color differentiation
•High resolution amplifier for triple 16-bit calculation
•Dual digital display & Direct access
•New UV sensor head for fluorescent Detection
•New Luster Detection sensor head
•Three detection modes for every target [Super I / C' / C+I]
Digital, 7 light color combinations RGB fiberoptic sensor with 16-bit accuracy. Including a new UV sensor head, luster detection head, 2-color digital display and unique color element detection. Detects targets conventional sensors cannot.
|
|
- Scanner tor colour detection
- Colour tolerance adjustable in levels
- Static teach-in procedure
- Teach-in via button or control line
- High switching frequency for detection of fast or small objects and marks
|
|
MTCSiCS in LCC8 packaging
JENCOLOUR product family / True Colour Sensoren
The MTCS true colour sensor, based on the standard spectral value function CIE 1931 (DIN5033), makes it possible to measure colours in the three-range method, in accordance with DIN 5033.
- Detection/ measurement of colours more accurately and much faster than human eye
- low dark current
- Signal input frequencies >100 kHz
- RoHS compliant
- Values display as XYZ
- Calibration in system L*a*b
Typical Applications:
- Conceptual formulation from the colour and white metrics
- Low-cost colour measurement
- Colorimeter (measurement and calibration e.g. display screen)
- Illuminate regulation (video projector and RPTV)
- LED test
- Control of coloured light sources
|
|
The CIELab Color Sensor PR0094 is a System with integrated high power lightsource.
Technical data:
- test parameters delta L and delta ab
- 31 different products teaching to the sensor
- Resolution 13 bit
- Dynamic >100 dB
- power supply 24V DC +/- 5%
- Serial and parallel interface useable in parallel
- Cycle time approx. 25ms for 1 product
|
|
The color sensor PR0079 is a system for the passive detection of color in the visible spectrum of light. Here the product to be detected is constantly illuminated via an internal high power LED light source and the reflected light is evaluated.
The module can be used as a mere analog sensor but can also be used a Good/Bad detector via the digital interface.
Both interfaces can be used in parallel. In an application as Good/Bad detector the module uses product specific parameters configured by the user via the software tool contained in the scope of delivery. These parameters are permanently stored on the module. 16 different products can be parameterized and selectively tested.
|
|
The color sensor PR0047 is a system for the passive detection of color in the visible spectrum of light. Here the product to be detected is illuminated and the reflected light is evaluated.
The module can be used as a mere analog sensor but can also be used a Good/Bad detector via the digital interface.
Both interfaces can be used in parallel. In an application as Good/Bad detector the module uses product specific parameters configured by the user via the software tool contained in the scope of delivery. These parameters are permanently stored on the module. 16 different products can be parameterized and selectively tested.
|
|
The color sensors of SI-COLO Series operate according to the 3-color-range principle, with a white-light LED as a light source.
Except of the sensors of SI-COLO1 series, the color sensors can be parameterized under Windows® through the serial RS232 interface.
|
|
|
These high-quality sensors detect shades in changes to colour or surface structures and are frequently used in quality testing.
|
|
Easy handling by means of the teach method.
Compact design.
Insensitive to extraneous light.
Detection of colour shades can be set separately.
Online colour detection of intransparent objects in the diffuse-reflection mode
or of transparent objects in the retro-reflective mode.
Contrast and colour sensors in industrial processes
For automating operations in the manufacturing and processing industry contrast and colour sensors are gaining more and more importance. In practice applications are almost unlimited. They range from identifying and sorting coloured objects through to checking coloured surfaces. Often there is a colour in the object which can be picked up, if not a mark can be applied easily. Colour detection systems are more reliable and powerful than the human eye because errors caused by tiring, subjective colour assessment and slow response times just don't happen.
|
|
|
|
|
|
Color is one of the last qualities still being checked by human eyes in most applications. Color sensors such as the CS24D are changing this. Electronic color sensors are increasingly being used in automated applications to reduce automation errors and improve quality at production line speeds.
Delta's color sensors and sorters are based on our patented pulsed LED technology and offer the benefits of rugged, long-life, solid-state lighting with a wide range of colors from blue to near-infrared.
While most color sensors use a single white LED and filtered detectors, Delta's color sensors are different. They use multiple ultra-high intensity LEDs for smooth, bright lighting and unfiltered large-area precision photodiodes for better signal-to-noise ratio. And the resulting large sensing areas provide superior performance on textured materials.
Be confident the color you want is traveling down your production line. Delta's color sensors provide superior performance in a wide variety of applications, even with textured and other difficult materials.
|
|
We offer a variety of sensors and modules for LCD color monitoring and simple color detection. These photosensors are color sensors using a 3-element (or 2-element) photodiode with color sensitivity assembled in one package. Modules for TFT-LCD monitor and evaluation circuits are also provided.
|
|
FKDM 22
(large light spot, 2 channels)
housing : metal
sensing distance max. : 40 mm
response time (fastest version) : < 0,34 ms
features : up to 2 colors can be distinguished properly, spot size 3 x 5 mm, rugged metal housing, IP 67
FKDM 22
(large light spot, 4 channels)
housing : metal
sensing distance max. : 40 mm
response time (fastest version) : < 0,34 ms
features : up to 4 colors can be distinguished properly, spot size 3 x 5 mm, rugged metal housing, IP 67
FKDM 22
(small light spot)
housing : metal
sensing distance max. : 25 mm
response time (fastest version) : < 0,34 ms
features : up to 4 colors can be distinguished properly, spot size 0,7 x 1,3 mm, rugged metal housing, IP 67
|
|
"New Technic" white light LED transmitter with no limit in life time and colour resolution
4 cannels included
1 ms response time
"Teach In" function
9 bit resolution
LED illumination (RGB)
fibre optics adaption
2-50 mm sensing distance
4 outputs
Option: RS 232 interface
Option: on request: 12 Channels, 0,5ms response time,
RS 232 interface (WLCS-M-12)
|
|
|
|
|
|
FT 50C – A new ray of light in colour detection
With the FT 50 C colour sensor, SensoPart has set another milestone in the technical development of colour sensor technology: the first colour sensor with only one light source in the small standard size, which guarantees the precise detection of objects in the whole working area. And which shows many other technical features that make it capable of a top performance as a standard. The exceptional quality of the FT 50 C is its operational principle with only one light source.The LED emits visible white light. At a large distance range, objects are detected by a patented optical system independently of their shape. The colour to be detected is learned simply by teach-in and the FT 50 C is at once ready for use. It compares the target object with the taught-in reference colour and if they match, it sets one of the three available switching outputs.
Field-proven applications
The FT 50 colour sensor simplifies and speeds up sorting and control tasks within a broad spectrum of automated working processes. Whether it is the distinction of the degrees of browning of cookies in the food industry, the positioning of register marks on packings in the pharmaceutic industry or any other detection task: the FT 50 C is the right sensor whenever all the others have had enough of it.
FT 50 C- 3 Colour sensor
Generates a rectangular light spot of 1 mm by 5 mm. Designed for the detection of oblong objects.Typical applications: checking the presence and correct order of stranded conductors in a flat cable.
|
|
FP11PCT80 & FP04PCT80
Those color sensor are capable of evaluating up to three colours simultaneously. A small spot and a large working range are made possible thanks to single-lens optics. All sensor settings can be selected by means of Teach-In, as well as via the RS-232 interface. Values generated by the sensor can be read out via the interface or digital switching outputs. The sensor has 3 PNP switching outputs and supplies RGB color values via the interface.
FD01
The FD01 is part of a modular color sensor system, which can be adapted to any application with the help of glass fiber optic cabel.
|
|
|
|
|
|
SPECTRO-3 Series - Color Sensors "True Color"
Human vision and recognition - but a thousand times faster
With the SPECTRO-3 series there now is a family of color sensors that has been specifically designed for "true-color" detection ("human color reception") and high switching frequency. The sensors can be operated both in AC and in DC mode, with integrated or external light source. With the included SPECTRO3-Scope software illumination can also be turned off with a simple mouse-click, which then also allows the color and brightness inspection of self-luminous objects such as LEDs, automobile tail lights, halogen lamps, or fluorescent lamps. Up to 31 colors can be provided through the 5 digital outputs, the maximum switching frequency is 30 kHz.
Apart from a super-bright white-light source, a high-performance UV light source also is available, which allows a color and brightness differentiation of fluorescent colors without any problems. Different optical frontends make it possible to implement operating distances of almost 0 mm up to 500 mm, with detection areas of Ø 0.5 mm to approx. Ø 100 mm. The use of an optical fibre version allows applications in Ex areas.
In combination with a reflected-light optical fiber and a neutral-absorber attachment unit the SPECTRO-3-FIO (version for use with fiber optics) makes it possible to perform a color inspection of different self-luminous objects.
|
|
|
These high-quality sensors detect shades in changes to colour or surface structures and are frequently used in quality testing.
|
|
|
|
|
|
WORLD-BEAM® Q12
The ultra-miniature universal sensor
- A new industry standard for miniature photoelectric sensors
- Bipolar NPN/PNP outputs in a housing just 22 x 8 x 12 mm
- Powerful sensing performance for extremely confined areas
- IP67 rating for use in a wide range of applications
- Mounting flexibility on & inside manufacturing equipment
- Overmolded design for enhanced durability & shielding
- Robust metal-lined mounting holes on all models
WORLD-BEAM® QS18
The ultimate value, world-standard sensor
- Universal photoelectric family with 18 mm threaded lens
- Replacement for hundreds of other sensor styles
- Rugged IP67 housing for harsh environments
- Available in all sensing modes
- QS18 Expert models with easy push-button setup
- 360-degree visible multi-function LED indicators
- Ranges are up to 20 m
WORLD-BEAM® QS30
- High power sensing with ranges up to 200 m
- Diffuse, opposed, retro, fixed- or adjustable-field and laser sensing modes
- Universal voltage models available
- Smallest sensor with integrated e/m relay
- Wide variety of special application sensing modes including; high-gain, laser and ultra-sensitive models
|
|
BKT 67M-001-U-S92
BKT0001
Emitter type blue (465 nm), green (520 nm), red (630 nm), autom. selected
permissable ambient light EN 60947-5-2
light spot dimensions 1.5 x 5 at 9mm
Depth of field ±3 mm
Light spot orientation vertical
Protected against reversal yes
teach pushbutton yes
delay time 20ms
Data storage EEPROM memory
Load current capacity max. (Ie) 100 mA
Time delay before available 300 ms
Switching output PNP/NPN switchable
Operating frequency (f) 15000 Hz
Current Consumption Io max. (No Load) 50 mA
Supply voltage min. 10 V
Supply voltage max. 30 V
Voltage ripple max. max. 2V
Voltage drop Ud max. at Ie 2 V
Length 1 60 mm
Length 2 79 mm
Length 3 32 mm
Ambient temperature max. +55 °C
Ambient temperature min. -10 °C
|
|
Reference: PC 929 LS
Adjustable sensing distance: 4 to 15 cm
Supply: 10 lo 30 VDC
Output: PNP ' Teach-in '
Dimensions: 12x32x20 mm
Miniaturised
Integrated amplfiei
Detection indcadcn by LED
Red pulsed viable lijht
Laser d3ss 2
Direct / inverse output
Remote leach-in
Functions lock
Dirty indicator
ABS housing
M8 plug
Applications:
Mark detection: on pack tig, on labels, on paper firm, plastu...
Sensors positioning where space is limited
|
|
TL46 series: NEW CONTRAST SENSOR LINE IN STANDARD METAL HOUSING
The new contrast sensor line of the TL46 series is available in 3 different versions. The TL46-W basic version has only one setting push-button, 2 indication LEDs and optimised performances to obtain maximum use at the lowest price. The TL46-WL standard metal version has 3 push-buttons and a bargraph for manual, automatic or manual setting of the threshold, with excellent performances reaching maximum contrast resolution in grey or coloured scale with a 20 kHz switching frequency. The TL46-WLF enhanced version offers also a 4-digit display enabling the setting of the most advanced functions and the maximum performances are reached, such as the 30 kHz switching frequency.
|
|
|
|
|
|
The CNTX™ combines small spot size and fast response to achieve high-speed contrast differentiation of both neutral and color targets. The sensor provides numerical display of 50 grayscale levels. The broad-spectrum light source allows accurate detection of a wide range of colors against any background. The flexibility of the CNTX™ makes it easy to set-up in a wide variety of printing, packaging and converting applications.
High color contrast sensitivity and resolution.
High detection speed, <150-microsecond discrete output response.
Broad-spectrum white LED light source allows detection of all colors.
Two gain settings and three light source intensity settings allow a wide range of adjustment capability.
Easy-to-use operator adjustable threshold.
Fast and convenient integration. In one sensor you get both analog and discrete output, auto-detect for PNP/NPN configuration.
Unique numerical display indicates measured levels making process setup easy.
Circular spot allows for any orientation of sensor to marks.
|
|
|
|
Photoelectric sensors
