|
|
|
Proximity sensors are the most common and affordable solution for no-touch object detection. The most commonly-used proximity sensor is the inductive type, which generates an electromagnetic field to sense metal objects passing close to its face. This is usually the easiest sensing technology to apply in applications where the metal object to be detected is within an inch or two of the sensor face. Autonics offers 12 products of 6 different types of proximity sensors, inductive and capacitive, and maintains No. 1 market share in Korea for more than 10 years, and still endeavoring to advance product quality and sensing reliability up to the top level of global marketplace. If you are looking for the most cost effective and reliable proximity sensors, Autonics is the answer.
|
|
Inductive sensors
Capacitive sensors
Photoelectric sensors
Tilt sensor
Photoelectric safety devices
Coded magnetic switches / Safety transponder system
Safety magnetic controller
Magnetic switches
Float switches
Sensors for potentially explosive atmospheres
|
|
Proximity Sensors:
Metal bodied Proximity sensors with long detection range and 3 year Warrantee.
|
|
Series 300 - Smaller than small!
- Smallest fully self-contained inductive proximity switches in the world.
- Ø3 mm and M4, housing length 22 mm, weight approx. 2 g (with 100 mm cable).
- Operating distance of 0.6 mm, or 1 mm (increased).
- Safe operation; all usual protection functions of larger devices are built in.
|
|
|
Proximity Sensors are available in models using high-frequency oscillation to detect ferrous and non-ferrous metal objects and in capacitive models to detect non-metal objects. Models are available with environment resistance, heat resistance, resistance to chemicals, and resistance to water.
|
|
inductive sensors
- starting at Ø 3mm
- DC-, Namur- and AC-versions
- plug or cable connection
- normally open, normally closed, antivalent output
- 2-, 3- und 4-wire technology
- stainless steel, brass-, plastic housings
- short circuit protection/reverse battery protection/overload protection
- pressure resistant sensors up to 300 bar
- special designs on request
|
|
Osiprox XS6 Auto-adaptable 12 mm Barrel Inductive Sensor
Features:
Auto-Adaptable Capability
Self-contained, 12 mm housing style
Sensing Range up to 9 mm (.35")
UL Approved
CE Approved
|
|
|
Warner Electric has many years of experience in applying sensors and switches in motion control applications. Our broad range of innovative and technologically advanced products offers our customers the exact solution to satisfy their sensing applications needs.
|
|
general data mounting type shielded
special type with banking screw
nominal sensing distance Sn 0,4 mm
hysteresis 3 ... 20 % of Sr
output indicator 4 port LED red
electrical data switching frequency < 5 kHz
voltage supply range +Vs 10 ... 30 VDC
current consumption max. 18 mA
voltage drop Vd < 2,5 VDC
output current < 100 mA
short circuit protection yes
reverse polarity protection yes
mechanical data type cylindrical threaded
material (sensing face) PBT
housing material steel / hardened steel
dimension 8 mm
housing length 56 mm
connection types connector M8
ambient conditions operating temperature -25 ... +75 °C
protection class IP 67
|
|
|
|
|
|
Features
Introducing the newest member of the rectangular proximity sensor line, the GX-F/H series. This exciting new series offers an unprecidented level of stability, durability, and workability. Using advanced manufacturing techniques, SUNX is able to create sensors that are minimize part to part variance and offer a detection distance that only varies by a maximum of 0.4mm! The result is an incredibly stable detection that is suitable for usage in high volume applications where precision from installation to installation is imperative.
The environmental characteristics of the GX-F/H series further solidify its high-end performance, easily surpassing conventional products. The IP68g enclosure completely isolates the sensor from the effects of dirt, water, or oil allowing usage in very harsh environments. The series also exhibits an extrememly tight deviation of sensing characteristics, +/-8%, over its usable temperature range of -25 to +70 degrees C. Add in a 10X increase in vibration in shock resistance over our previous models and you are left with the most durable proximity sensor SUNX has created to date. Lastly, SUNX has added a metal sleeve in the mounting hole to increase tightening strength, and doubled the wiring gauge to make workability far easier then our previous models. Installation has never been easier. Download the full product catalog for more information or contact us today!
|
|
There are millions of inductive sensors deployed in almost every area of factory automation. They detect metal objects contactless and are distinguished by a long operating life and extreme robustness. The sensors from SICK provide optimum precision and reliability using the most modern ASIC technology.
SICK can always provide the right solution to meet your requirements - from cylindrical and rectangular standard sensors with one, two or three set switching distances to special sensors for Ex-zone applications and harsh environments. It is the intelligent, reliable route to implementing industry-specific and customized solutions to any task involving automation.
|
|
|
The industry standard inductive sensors provide the highest reliability for machine part and metal object detection from short to long distance detection, in special environments, for special mounting conditions, special applications or special connectivity requirements.
|
|
|
|
|
|
High Stability Inductive Proximity Sensor
Introducing the newest member of the rectangular proximity sensor line, the GX-F/H series. This exciting new series offers an unprecidented level of stability, durability, and workability. Using advanced manufacturing techniques, SUNX is able to create sensors that are minimize part to part variance and offer a detection distance that only varies by a maximum of 0.4mm! The result is an incredibly stable detection that is suitable for usage in high volume applications where precision from installation to installation is imperative.
The environmental characteristics of the GX-F/H series further solidify its high-end performance, easily surpassing conventional products. The IP68g enclosure completely isolates the sensor from the effects of dirt, water, or oil allowing usage in very harsh environments. The series also exhibits an extrememly tight deviation of sensing characteristics, +/-8%, over its usable temperature range of -25 to +70 degrees C. Add in a 10X increase in vibration in shock resistance over our previous models and you are left with the most durable proximity sensor SUNX has created to date. Lastly, SUNX has added a metal sleeve in the mounting hole to increase tightening strength, and doubled the wiring gauge to make workability far easier then our previous models. Installation has never been easier. Download the full product catalog for more information or contact us today!
|
|
Balluff single and multiple position limit switches have proven themselves for decades under the most stringent conditions. They ensure flawless function under vibration, shock, rapid temperature changes, and in the presence of aggressive coolants/lubricants and heavy chip formation. Inductive single and multiple position limit switches are also characterized by high electromagnetic compatibility.
|
|
|
Thanks to their reliability and to their facility of use, the inductive proximity detectors are today sensors of choice for many applications in the fields of automation and robotics. They can detect metal target very and are highly insensitive with the difficult industrial environments containing dirtiness, moisture, dust and oil. Available in many faces of case and various executions, our inductive proximity detectors of quality are the result of permanent technological innovations, offering new solutions. In addition to miniature detectors allowing a more close mechanical integration, we propose a whole range of sensors at analogical exit.
|
|
The QUADRO-PROX series of inductive proximity switches is available with detection ranges from 0,2 up to 18 mm. The polycarbonate or metal housings with the QUADRO® (PDF) design are ideal for heavy duty applications or where space is at a premium.
The electronics have been built to conform to industry standards. Power supply of 10 - 30V and PNP / NPN / Namur output configurations are all available.
Next to the standard products DIS also supplies many CUSTOMIZED inductive switches.
|
|
A proximity switch is a device which causes a switching action without physical contact. SCHMERSAL proximity switches respond to targets that come within the active range of their generated sensing fields. These units are completely self-contained, and house a field generator, amplifier, and other necessary circuitry to accomplish electronic switching.
The units are all solid state and have no moving parts that can wear out. The electronic switches are not susceptible to contact contamination, contact erosion, or material transfer as are mechanical switches.
Their service life, within their specified ratings, is virtually unlimited. The switching is insensitive to vibration, and is positive (full step function) without chatter, regardles of how slowly the target approaches or recedes from the sensor
|
|
Inductive proximity switches are designed for wear-free and non-contact detection of metal objects. For this they use a high-frequency electro-magnetic AC field that interacts with the target.
Moreover uprox+ sensors offer highest switching disntance with their unique coil concept, factor 1 and highest operational safety from the start by simple and safe mounting.
|
|
|
A process card resonant circuit is arranged with these sensors under the active surface. The electromagnetic field produced by the process card resonant circuit becomes during approximation of metals (e.g. Steel, aluminum or brass) affect. Achieves the metal the adjusted switching gap switches the exit.
|
|
These are sensors which have their sensing area formed in a ring
and sensing occurs when a metallic mass enters this ring. They are
particularly suitable for sensing, counting and checking small metal
parts: screws, nuts washers etc. or for similar applications.
-They are supplied with internal diameter
5-12-15-22-25-30- 44-63-100 mm.
-NAMUR types from 5 ÷ 24 Vdc
-NAMUR EX types
-Amplified 3 and 4 wire types NPN or PNP from 10 ÷ 30 Vdc
SIA25 totally screened against mutual interference
-Led incorporated
-Max. output current 200 mA
-Types with retained impulse 100 ms
All types are available with cable or plug for connector
|
|
Features
Compact design
Metal connector
Ring-diameter 6mm to 100 mm
Static operating principle
High resolution
Short response time
Pulse stretching adjustable
Short-circuit protection
Protection class IP 67
Typical fields of application
Applications in the assembling technology and supply automation, e.g. detection and jam control of small metallic parts in feed hoses.
Wire break detection etc.
|
|
General description
di-soric infrared distance sensors OAA... are characterised by a large operating distance, while having a very good colour independence.Thanks to the large diameter of light spot uneven surfaces of stones, sintered material or rough boards will be safely detected. Due to that di-soric infrared distance sensors OAA... are especially suitable for height control in concrete and gravel works, brickyards as well as saw mills. Two independently from each other adjustable thresholds enable diverse operation possibilities.
|
|
APPLICATIONS
• Water-based product market
1) Automatic lighting of wash basin units
2) Toilets
3) Automatic water flow from faucets
• Stores and financial instructions
1) Automatic doors
2) Automatic lighting
3) Cash dispensing machines
4) Automatic teller machines
5) Visitor detecting sensors
• Amusement market Automatic lighting for game display
• Medical field
Non-contact switch
• Others
1) Automatic ticket gates
2) Seat-taking sensors
3) Golf cart collision prevention
|
|
|
|
|
|
The RPS-409A-IS is an intrinsically safe, UL Listed analog ultrasonic sensor. It is a self-contained sensor in a 30mm PVC barrel housing. It is powered by 16-30VDC with reverse polarity protection. It also has a narrow beam angle, which enables it to get into tight places. A flat target can tilt up to 10 degrees and still be detected.
The RPS-409A-IS has a short circuit protected analog 0-10VDC output. Example using the RPS-409A-80-IS: The output is a linear .125 volts per inch.
The RPS-409A-IS has built in temperature compensation to provide accurate readings throughout the entire operating temperature range.
An LED indicator is provided. The LED is green when not detecting and changes to red when a target moves into place. The sensor is completely sealed and the connection is made by way of IP and NEMA rated cables.
There are four sensing ranges available: 4-40", 6-80", 10-144", and 12-216".
The RPS-409A-IS is designed to take advantage of today's PLC and computer analog input cards. The numerical values that are programmed into the PLC or computer will determine the zero and span.
|
|
Reference: P 925 L1 AN S - P 925 L2 AN S - P 925 L3 AN S
Sensing distance :
P 925 L1 AN S : 40 to 60 mm
P 925 L2 AN S : 45 to 85 mm
P 925 L3 AN S :
Supply : 18 to 28 VDC
Output : analogical 0...10 V
Description
Detection indication by LED
Red pulsed visible light
Laser class 2
Minimum resolution : 0,01 mm
Analogical output 0...10 V
Antichock ABS Housing
Orientable M12 connector
Applications
Position control of an arm robot
Thickness measurement of thickness pieces
|
|
ODS Blue-line sensors is the price leader in high performance non-contact measuring.
The ODS Blue-line sensors is a very price competitive series of high quality optical laser sensors, especially designed to meet demands from machine builders worldwide. The result is unsurpassed value for money, based on a simple mechanical layout, but at the same time living up to the well known high ODS-standards of measuring accuracy and rugged durability.
The applications are innumerable. From food and medical industry over wood-, rubber- and offshore industry to everywhere a non-contact precision measurement is advantageous.
The ODS Blue-line is a good example of DSE’s efforts in customization. In addition to the competitive program of ODS sensors and O2DS scanners, DSE design and manufacture special sensors to customer defined specifications.
For further information please study the PDF/datasheet on our website www.sensor.dk
|
|
|
|
|
|
With our new Laser-Distance Sensors DLS-B you measure absolute distances up to 500 meters. Thanks to state of the art laser technology the DLS-B device measures with a precision of 1.5 millimeters. It represents a cost efficient solution even at extreme environment temperatures as low as -40° C.
The DLS-B is an optical measuring device. You can measure, maintenance-free, distances on natural and reflective surfaces. You determine positions on objects difficult to access or with very high surface temperatures. Just as well you can measure distances in an aggressive environment in an easy and accurate way.
Serial, analog and digital interfaces are standard features for the complete DLS-B product line. This enables you to easily connect the DLS-B to a control system (SPS, IPC or PC)
The DLS-B device runs in a “Stand-alone-mode” and independently executes all programmed functions. Thanks to the flexible range of functions an external display can be connected directly to the DLS-B device via interface RS232 or RS422. Via a digital input, measurements can also be activated from an external button or switch.
For easy configuration of the DLS-B devices, the necessary software is at your disposal.
|
|
Measuring sensors
Measuring optosensory technology offers an unusual performance spectrum. Depending on the field of application, modern optosensors make use of different measurement principles such as triangulation, phase shift or pulse propagation time to measure distances. Measurement takes place either directly to an object or to a reflector. Leuze electronic also offers positioning systems which determine positions using a barcode tape.
|
|
Distance sensor FT 92 ILA-PSL5
Large scanning distances and working
ranges (proximity version up to 6 m on
white objects, 30 m on refl ector)
High repeatability
High measuring rates
Very good cost-performance ratio
Optional red pilot laser
2 PNP signal outputs
1 analogue output 4 ... 20 mA
All outputs in the measuring range
freely adjustable
Standard M12 plug
laser protection class 2
|
|
|
|
|
|
HL-C1 sensors
The laser displacement sensor HL-C1 has reached the highest level in its class. Even when sensing difficult objects such as black rubber or very shiny objects, the sensor has no problems maintaining stable and consistent results. Through the fusion of our unique newly developed optical system, linear image sensor methodology and high-speed sampling technology, a wide variety of objects can now be stably measured with great precision at ultra high speeds. This new sensor is developed for use in almost all fields of industry like tyre manufacturing or semiconductor production (wafers, printed circuit boards).
HL-C1 controller
The compact and multifunctional controller unit HL-C1CM again shows how powerful this new sensor series is. A flexible combination of controller and sensor heads allows cost-effective service and maintenance. Even in production changeovers, i.e. when the distance to be measured changes, only the head has to be exchanged. Another industry first is a compact touch panel that allows you to conveniently make settings and display data. Up to two sensor heads can communicate with one controller. Together with the touch panel, results can be calculated, e.g. for thickness or difference measurement. Moreover, all adjustments and results can be transmitted via RS232 to a normal PC.
|
|
|
|
Proximity sensors
