|
|
| Products 181 to 210 of 311 |
Perfect Cast solid BI extra flat steel and concrete
All our ponts-bascules is designed according to the principle of marking THIS factory patented Arpège Master K which avoids an expensive calibration on site.
In factory, we mount, cable and fix the sensors of weight (or balances) on their frame and carry out the calibration of the measuring equipment and its marking EC.
We block then the sensors for transport and on arrival among customers, ponts-bascules is discharged, assembled, the freed sensors and in less than four hours our ponts-bascules is ready with the use in commercial transaction.
|
|
With weighing systems directly integrated into the SIMATIC automation system in either central or distributed configurations, Siemens offers uniform solution concepts for weighing technology.
Here you find a wide range of weighing processors (for force measurements, container, batching, differential proportioning and bagging scales) and load cells, including installation accessories (for force and weight measurement for use in harsh environments).
|
|
|
Sartorius offers powerful process and system controllers for scales used in applications involving incoming goods and loading, filling and discharging processes, average weight control of prepackages, material acceptance and distribution as well as recipe management and batching processes.
|
|
|
|
|
|
HI 4050 Weight Controller
This weight controller / weight indicator acts as a front end to a PLC, PC or DCS system for most weighing applications, or as a stand-alone for simple control or weight monitoring.
Modularity – Configure the HI 4050 weight controller to suit your applications:
- Specify it with or without a display
- Choose either AC or DC power
- Add some Digital I/O
- Select a communication network: Analog, DeviceNet, EtherNet/IP, Allen-Bradley Remote I/O, Profibus, or Modbus TCP/IP
- Choose between a panel/remote mount and a DIN rail mount. With a display, you choose either to panel mount the entire assembly, or to mount the controller housing assembly remotely.
Ease of Installation: Installation is easy, with no special tools or expertise required. Just drill five to nine standard holes in your panel, and attach the front panel keyboard display. There is no rectangular cutout required. The controller housing can be attached to the rear of the panel or remotely up to 100 feet away to a DIN rail. Need to replace an HI 2151/30WC or HI 2110WI? Just drill four holes and plug the HI 4050 controller in.
|
|
MODEL 562 - PROCESS WEIGHT CONTROLLER
APPLICATIONS
-Process Control
- Inventory Management Modes
- Integrated Batch Control
- Data Management
- Truck Scale I/O Weighing
- Multiple Weigh Systems
- Fieldbus/Ethernet Connectivity
- OEM Defined Programs
FEATURES
- Programmable Macros
- Programmable Databases
- Programmable Data Registers
- VFD or LCD Display
- Remote Display Mode
- Stainless Swivel Bracket or Panel Mount Option
|
|
|
|
|
|
When a successful product with new features takes the market by surprise, you are bound to benefit from it. The DISOBOX by Schenck Process rounds out the concept of the Mechatronic scale. At the same time, it sets new standards für convenience, compatibility, and range of applications.
Signal acquisition and on-site process sontrole are mounted locally on the scale. Communication with high-level system components such as a PC, PLC, or weighing terminal takes place over interference-free digital transmission channels. In combination with DISOMAT B plus or DISOVIEW E, you have access to legal-for-trade weighing systems that combine the advantages of conventional analysis devices with those of load cells with direct digital output.
Our Solutions Package
-Separate mearsurements from up to 8 load cells or
channels
-Individual monitoring of the load cells
-Optional interfaces to fieldbuses
Applications
-Truck scales applications
-Crane scales applications
-Hopper scales and fill-level monitoring
|
|
For new conveyor installations or retrofit existing conveyors. Weigh Legs have adjustable height and capacities from 250 to 1,000 lb per Weigh Leg frame.
Weigh legs allow you to save steps and increase productivity with in-line weight measurement and checkweighing.
The Weigh Leg frame is an integrated assembly, incorporating two supporting legs, two Weigh Bars, junction box and cabling. The finish is a heat-fused powder paint, which provides a high level of corrosion protection.
|
|
|
|
|
|
Optimal solutions for tank weighing, level measurement and batching processes.
HBM tank weighing modules, electronics, and software meet the most stringent requirements for precision and reliability in all types of tank and batch weighing applications.
Our tank weighing modules help maximise machine reliability, product quality and repeatability in the following industries:
Chemical Industry
Almost limitless range of solutions, especially for potentially explosive atmospheres
Cosmetic Industry
Batch weighing of lifestyle, health, and beauty products
Pharmaceutical Industry
Maintaining the high quality of medicinal products
Animal Feed Industry
Ensuring the delivery of exact quantities of fodder to farm animals
Synthetic Material Processing
Weighing and batching of goods in the synthetic materials processing industry
Food Industry
Our hermetically-encapsulated load cells made of stainless steel provide a long service life with absolute weighing precision, even in damp, corrosion-prone environments
Steel Industry
Reliable results even at high temperatures
Building Materials Industry
Weighing and batching of heavy building material in silos e.g. additives for different types of concrete.
|
|
Whether storage tank or outdoor silo, batching tank, mixer or reactor – Sartorius offers tailor-made equipment for almost every process vessel scale.
In addition to rugged and particularly reliable load cells, this also includes a complete range of accessories: from GL-certified mounting kits to state-of-the-art process transmitters. Everything fits together.
• From a few kilograms to well over a thousand tons: the complete range for almost every process situation and accuracy specification
• 100% maintenance-free and highly reliable for the most accurate measurement values that you can trust
• Unique safety provided by mounting kits and constrainers certified by Germanischer Lloyd
• Complete range of instrumentation including digital process transmitters, process indicators and batch and system controllers
|
|
An extensive range of products for the use in the process industry, covering all accuracy levels, various automation needs and communication demands.
The applications range from level control by weight, flow by weight, bulk weighing of silos, standard batching, weighing and batching of agitated vessels and batching control in parallel including recipe handling in larger systems.
|
|
MH - WEIGH MODULE
APPLICATIONS
- Tank, Bin and Hopper Weighing
- Mixer and Blender Weighing
- Bulk Material Inventory/Processing
- Silo/Large Vessel Weighing
- Legal-For-Trade Certified System
FEATURES
- 5,000 to 150,000 lbs. Capacities
- Dual Shear Beam Technology
- 0.02% Accuracy Class
- Epoxy-Coated Steel Mount
- Accommodates Vessel Movement
- Self-Checking/Integrated Design
- Matched Output Sensitivities
- IP67 Environmental Sealing
- Two Year Warranty
|
|
Weighing and Batching
An extensive range of products for the use in the process industry, covering all accuracy levels, various automation needs and communication demands.
The applications range from level control by weight, flow by weight, bulk weighing of silos, standard batching, weighing and batching of agitated vessels and batching control in parallel including recipe handling in larger systems.
|
|
ADOS offer a wide range of industrial platform scales with weighing ranges from 3 kg to more than 10000 kg. The rugged weighing platforms available in stainless steel or painted carbon steel are suitable for daily use in dry and wet areas.
The platforms are available with standard dimensions and capacity or designed with dimensions and capacities on customer specifications.
A special version can operate in hazardous areas.
|
|
|
Weighing platforms and modules. Solutions suitable for weighing in all types of industrial applications. Single load cell platforms. Four-load cell platforms. Counting scales. Weighing bars. Pallet-weighing. Crane scales.
|
|
Combics - Weighing Platforms
…from 0.1 g to 3,000 kg, these are a whole new generation of rugged and flexible industrial scales.
• Accuracy 3,000e, 2 x 3,000e, class III; 15,000d, 30,000d
• 13 different sizes
• IP65 | IP68 | IP69K protection
• Finish: painted or various stainless steel grades
• Accessories include drive-on ramps, pit frames
• Stainless steel models can optionally be operated in Zones 2 and 22
|
|
|
|
|
|
The ProDec floor scale was designed as a low profile, economical scale for use in many environments. The stainless steel version can take the high pressure wash downs and highly corrosive environments in many industrial settings. Capacities from 2,000 to 20,000 lbs and sizes from 30" x 30" to 96" x 72" available.
Low profile design
The low profile design helps relieve the back strain of repetitive weighing. The scale height is only 3.31 inches on models of 5,000 lb or less, 4.06 inches on 10,000 lb models and 5 inches on 20,000 lb models. This allows for easy-on and easy-off manipulation of carts.
Built to last
Steel support channels welded under the top plate add superior strength and keep decks from warping and bending.
Safety tread deck
The top plate on the deck and ramp surfaces is a safety tread pattern. This non-slip pattern reduces the risk of injuries.
Four-way ramps
ProDecs are placed in the most efficient traffic patterns to utilize more than one weighing situation. The four-way ramp positioning speeds up work flow from any direction.
|
|
Features
Two-range version: weighing range is divided into two ranges.
The lower range from 0kg is divided into a smaller resolution; the scale is therefore even more precise in the lower load range.
Design
- Sturdy construction with strain gauge load cell made of anodised
aluminium
- Special alloy with Protection Class IP 65
- Mechanical overload protection to protect the load cell
- Platform made of chrome nickel steel on all models
- Types 2880 and 2881: the support structure is made of corrosion-
protected die-cast aluminium. Designed for use in wet rooms.
- The measuring cable between weighing platform and digital indicator
is 2m long
|
|
MASTER Series 410 SRS/SRC
maximum capacity 300 kg
Solid and reliable scales, for rough use year after year
Strain gauge platform SRC (380x500) stainless steel IP 67
Strain gauge platform SRS (400x500) steel platform IP 65
• Rugged Scale with stainless steel platform
• Choice of two terminals
• Practical and user-friendly
• LC display with backlight
• Battery operation
• RS232 interface
• Units kg and lb
• 2 years warranty
Terminal SRD, ABS or stainless steel IP 67
• Large LC display with backlight
• Battery operation
• Units kg and lb
• Check weighing program
Terminal SRM, ABS or stainless steel IP 67
• LC display with backlight
• Battery operation
• Counting, units kg and lb
• Direct: - ID and date settings
- tare entry
- reference weight entry for counting
|
|
Engineered for easy use, the all-new Ohaus Indicators feature smart software and hardware enclosed in a modern industrial design. You can link our Indicators to any Ohaus bench scale - or any other scale system - with up to four load cells. Combined with Ohaus Champ bases, Ohaus has a wide variety of capacities and platform sizes to meet your operational needs.
|
|
Engineered for easy use, the all-new Ohaus Indicators feature smart software and hardware enclosed in a modern industrial design. You can link our Indicators to any Ohaus bench scale - or any other scale system - with up to four load cells. Combined with Ohaus Champ bases, Ohaus has a wide variety of capacities and platform sizes to meet your operational needs.
|
|
|
WRMDB weighing system for concrete plant (max 50 formulas), designed to control the batching of aggregate materials, cement, additives and the counting of water meter pulses. It is possible to measure the humidity of two aggregates with the automatic correction of water and aggregate quantities depending on the humidity acquired.
|
|
Weight sensing device Weightcontrol 2000
This microprocessor-controlled weight sensing device guarantees die-protection and quality control for casting weights up to max. 2000 gr. Within user-inputted tolerances, it secures a reliable weight comparison and communicates it to the diecasting machine.
Features:
- DMS-weight sensing-cell
- Temperature positional compensation
- Operator input
- LED-Display
- Weight-Display in grams
Special advantages:
- Wait function after weighing
- Automatic zeroing
|
|
The PEP structure is a frame on which are mounted 3 strain gauge
load cells. A receiving hopper rests on the load cells whose outlet is
fitted with a dosing extractor comprising a flat based mechanical
agitator with either a dosing coil (of ECS type) or dosing screw (ECV
type), and a variable speed
geared motor.
- In painted steel or ALL STAINLESS STEEL
Mounted under hoppers, silos, with an outlet butterfly valve,
this structure is suitable for extracting, dosing BULK granular
or powdery products.
Throughput: from 10 dm3/h to 10 m3/h as per model
Achievable accuracy: ± 0.25 to 1 %
|
|
The HC-EX is a special machine configuration of the HC for direct installation of the weighing belt and control terminal in areas where there is an explosion hazard.
The HC-EX is prepared for the ATEX approval and has a variable conveyor system.
Precise weighing and very simple operation in areas where there is an explosion hazard.
|
|
• Weighing range up to max. 1,500 g
• Additive dead load up to max. 3,000 g
• Protection class IP 44
• Housing material stainless steel
• Several interfaces available
|
|
|
|
|
|
BI 300 - SELF-SERVICE UNITS
Metrological approval
Test certificate LNE 03-03.
Mentioned in CE approval certificate type X201-A. n° F-01-A-005.
European directives
Directive 90/384/CEE relating to No-automatic weighing instruments.
Directive 89/336/CEE relating to ElectroMagnetic Compatibility.
Directive 73/23/CEE relating to Low Voltage equipment.
Application
The BI 300 range are self service consoles is a new generation of driver operated weighing systems based on many years of in-depth experience.
The key advantage of the BI 300 is the speed and flexibility it brings to the whole driver operated weighing operation.
The standard design of the BI 300 effectively acts as a extremely versatile intelligent hub specifically designed for weighbridge operations, this allows.
The BI 300 to interface to a wide variety of peripheral equipment such as printers, traffic lights, barriers RFID or barcode badges. The BI 300 is ideally suited for connection to a host computer system to form an integral part of a management information system.
|
|
|
|
|
|
METTLER TOLEDO manufactures and markets a wide range of industrial scale terminals to meet the weighing needs of almost any industry and any application.
Looking to the Future
They range from simple, easy-to-use terminals for straight weighing applications to advanced instruments that can accumulate data, control systems, operate peripheral equipment, communicate with computers, monitor scales and much more. No matter how simple or complex the application, all METTLER TOLEDO industrial scale terminals offer the highest degree of performance, accuracy and reliability available on the market.
As technological innovations continue to revolutionize all industries and issues such as total cost of ownership, return on investment, and ease of integration become more important, METTLER TOLEDO remains committed to developing scale terminals that meet our customers' changing needs today and tomorrow. Already, METTLER TOLEDO is establishing itself as a leader with the introduction of Internet-enabled scale terminals and other terminals that incorporate the leading technologies and offer open connectivity.
|
|
|
Weight Indicator TAD 3 is intended for converting signals from strain gauge based load cells and force transducers into suitable indication or for PC or PLC based systems. As options, flow measurement and recipe controlled batching facilities are available. The high accuracy and very fast transmission rates make TAD 3 perfectly suited to advanced process control. TAD 3 is panel mounted.
|
|
|
Weight Indicator TAD 3 is intended for converting signals from strain gauge based load cells and force transducers into suitable indication or for PC or PLC based systems. As options, flow measurement and recipe controlled batching facilities are available. The high accuracy and very fast transmission rates make TAD 3 perfectly suited to advanced process control. TAD 3 is panel mounted.
|
|
|
|
|
|
FEATURES
The A200E is a weight amplifier indicator based on a microcontroller. All the operations of configuration and weight calibration are done by front keyboard. The instrument is equipped with a main display to show weight and an auxiliary display to show the operator guide messages. The base version foresees three digital inputs, three digital outputs and two serial line outputs, a primary bi-directional line and an auxiliary one with transmission only.
The primary is available in RS232 or in RS485 mode to operate in multidrop network. ADOS has implemented as standard both the logic protocol MODBUS and PROFIBUS-DP by the gateway IPBUS1 (option). Options allow to expand the number of digital outputs from three to eleven ( S and D versions) and with options V or A it is possible to have an analog optoisolated output configured for 0-10 V or 4-20 mA. The A200E is equipped with a real time clock that allows to include date and time on printing reports. According to several applications, ADOS supply software versions for multicomponents batching and /or complex weighing process systems.
APPLICATIONS
Static weighing system
Multicomponents batchings
Testing machines
|
|
|
|
Weighing, Scales
