|
|
| Products 91 to 120 of 311 |
Minimum Sample Sizes for Maximum Savings
Microbalance & Ultra-microbalance
Excellence microbalances and ultra-microbalances from METTLER TOLEDO set new standards in terms of weighing performance, user friendliness and regulatory compliance.
Offering a capacity of 52 g with 0.001 mg readability, our XP56 microbalance is ideal for weighing small samples directly into the tare container. Sample transfer errors can be avoided, resulting in significant cost savings – particularly when using valuable materials.
For more information, please click on the models listed below. To receive support or a quotation, choose the appropriate button.
|
|
…from 5 g to 3,000 kg are especially easy to load.
• 1 x 3000e | 2 x 3000e (for legal metrology); class III
• High resolution can be set
• Ultra-low profile design; IP68 protection
• Painted or stainless steel finish (also electropolished)
• Can be used in Zones 1, 2, 21, 22 | FM CLASS I, II, III, DIV. 1
|
|
Hygienic-washdown design to meet special requirements for easy, thorough cleaning and rugged daily use in the food industry.
• AISI 304, stainless steel (Platform optional: AISI 316 Ti stainless steel electro polished)
• 4 display and control Units, type of protection IP67
• Platforms with type of protection IP68 + IP69K
• 3 platform dimensions
• 6 weighing ranges from 3 kg to 150 kg
• Overload protection
• Temperature range –10°C....+40°C
• 2 verifiable versions, accuracy class III, resolution 3.000 e and 2 x 3.000 e
• 2 versions non verifiable, resolution 15.000 d, 30.000 d
|
|
SC 800 T/SC 800 E
Modern scales with double-sided display, display and combined ticket/label printer, mounted on stand.
|
|
|
The OHAUS FD Food Portioning Scale is a rugged, multi-use portioning scale designed for use in food service applications. Ideally suited for food portioning and checkweighing, the FD Food Portioning Scale combines an easily cleaned design, fast display and high precision loadcell.
|
|
Features
The flat user-friendly universal scale for non-approved weighing operations. The patented Quattro-Tronic weighing system provides precise weighing measurements. This is also the reason for the compact design and low weight. Its low height makes it ideal for installation in worktop surfaces. The 12.5mm easy to read LCD is integrated in the scale. Easy to operate by gently touching the innovative soft-touch sensor. The scale is easily removed from the stainless steel tray for cleaning.
Design
- Convenient one-key operation with soft-touch sensor – no more
mechanical keys
- The scale is easy to clean due to its smooth surface and easy to
remove from the stainless steel installation tray
- 12.5mm LCD for easy readability
- High quality design stainless steel installation tray
- Ceramic-coated safety glass produces hardwearing surface
- Scratchproof, shockproof and heat resistant
- Full capacity tare range by subtraction (100%)
|
|
|
The OHAUS FD Food Portioning Scale is a rugged, multi-use portioning scale designed for use in food service applications. Ideally suited for food portioning and checkweighing, the FD Food Portioning Scale combines an easily cleaned design, fast display and high precision loadcell.
|
|
Chatillon hanging scales are found worldwide and used in industrial, scientific, educational, commercial and home applications. Our hanging scales are known for their quality and reliability and they offer unsurpassed accuracy and performance.
|
|
|
Multifunctional, modulare combination of checkweigher, laser coder and OCV/OCR camera. Compact design, comprehensive IQ/OQ cocumentation, 21CFR Part 11 conform. Track & Trace system solution
|
|
The group of weighing and automatic labelling at Gemini high speed functions under a computing system able to treat the weighings with speeds going to 150 products per minute.
For detailed information, visit www.preciamolen.com
|
|
ES 9002
2 Printer from above
The new ES 9002 provides fully automatic price labelling of the highest standard. Utilizing dynamic weighing technology, the system achieves a labelling output of 150 packs per minute with maximum precision.
The ES 9000 Series
ES 9001 | ES 9002 | ES 9003 | ES 9004 | ES 9005 | ES 9010 | ES 9011 | ES 9012 | ES 9013 | ES 9014 | ES 9022 | ES 9023 | ES 9800
|
|
If you need accurate, high speed weigh price labelling with longer running times, look no further than the WPL 8160. It’s specifically designed to handle small to medium size retail packs where, typically, high packing speeds of 160 packs/min are required.
Speed alone, however, is not enough because the weighing of every pack is vital to consistently efficient processing and production and this is where the 8160 excels.
To ensure that every pack is pitched correctly across the weigh table, driven side belts provide positive control and correct orientation of incoming packs. These, along with side guides that are manually adjusted to set the pack width at the input of the machine, ensure product runs true and correctly spaced over the weigh table.
The machine can regulate its own speed according to product input.
|
|
Weighing hopper
For the weighing and the storage of various products
INDUSTRIAL materials of crushing, mixes, handling, storage, proportioning, sifting and bagging
|
|
Marel hopper scales are designed for weighing a continuous product flow into batches for packing and other purposes. The hopper scale consists of a stainless steel hopper, a load cell, and a weight indicator. The hopper scale is controlled by a software program, which normally runs on an M2200 indicator.
The scale is designed to withstand the harsh environment commonly found in food processing plants, without any trade-off in weighing accuracy. The system is highly automated, extremely accurate and robust. Normally, the hopper scale is fed by an external in feed conveyor system. There are numerous variations to the basic hopper setup.
Easy to use
The M2000 Scale Indicator is operated with push buttons and keypad, using a simple built-in menu system. The indicator has a large, bright weighing display, and another display to show tare, grade number, etc.
The Hopper Scale Indicator also has a large filling bar display which shows clearly the packing status in real-time.
|
|
|
The Ramsey DE10 and DE20 Impact Weighers are unique devices designed to measure the mass flow rate and total mass of free-flowing particulate materials. They provide a low cost, yet highly accurate, method of measuring the mass flow of dry solids and powders for inventory process control and can help you save thousands of dollars by reducing waste and improving product quality.
|
|
Select the suitable scale from many models, designs and capacity ranges.
Comprehensive accessories and options allow perfect adaptation to the installation location and application.
• Weighing capacities to 3 t
• 13 platform sizes
• Built-in, combinable application programs (e.g. counting)
• SPEED UP technology for weight readouts within 0.5 s
• IP68 | IP66 protection
• HACCP | EHEDG compliance
• Optionally factoryverified accuracy class III
• Designs available for use in hazardous areas of the various zone classifications with ATEX and international approvals.
• Can be integrated into networks
|
|
|
Very High speed load cell interface that was especially designed for WIM application either trucks or trains. The LCIC-WIM comes with embedded application calculates "on the fly" the axle weight, axle speed and distance between axles. With 52000 samples per second high resolution A/D and powerful DSP that runs the WIM application on board, it consider to be the fastest and most intelligent Load Cell Interface that is available today in the market. The LCIC-WIM equipped with USB and RS232/485 and comes with drivers and full examples on how to communicate with the board and our monitoring package that helps to analyze the scale behavior under different speeds.
|
|
Has been designed for electronic weighing systems using strain-gage load cells. - Hopper and silos weighing - Platform scales - Batching and weighing systems - Weighing for intrinsically safe installations.
MAIN FEATURES :
- Heavy duty and small size construction
- Corner correction trimmers
- Six wire extension cable terminal board
|
|
DYNAMOMETER AND LOAD INDICATOR WITH DIGITAL DISPLAY
The new DYNAFOR LLX range of load indicating devices are highly accurate instruments for measuring tensile forces, suitable for many applications: transport and construction industries; testing and safety organisations; monitoring lifting equipment and load-checking goods in and out. The DYNAFOR principle is the movement of a material within its elastic limit, using bonded strain gauges to give an electrical signal under strain, relative to the load applied, which is instantly displayed on the LCD
|
|
|
Mechanic or electronic, overload detectors were developed to prevent the overloads which occur on lifting devices. From 1 until 3 break-points as the products, they avoid ruptures of cables, structural deformation and all the accidents due to an overload. There are with 94/9/CE ATEX Directive.
|
|
|
e load limiter type LC1 has been especially projected in order to be used on lifting devices where precision and reliability are needed on the load control.
|
|
Overload protection
Amplifier digital
Standard D
Type MVD-0481d_D
Overload devices are built up in Fail-Safe-Technology and are a specified system security feature for lifting gears of every kind.
Output relay: max 14 opener
Output current: 4 x 4-20 mA
Supply: 230 V/50 Hz
Summation: Yes
Constants input: by PC / Keyboard
Option:
Load collective counter: Yes, selectable
|
|
Axial movements (longitudinal) appear in many transport applications and feedings.
To limit longitudinal forces and prevent damages RINGSPANN developes special force limiters.
Forces up to a certain value can be transmitted in both directions completely free of play and rigid. On exceeding the preset disengaging force the power of the force is interrupted and the output part is no longer driven. After the overload has been cleared the driving part and the driven part are aligned towards each other and the force limiter reengages automatically.
|
|
|
|
|
|
FEATURES
T050E is a weight transmitter amplifier microcontroller based. Four push buttons and one display that shows the guide messages, help the operator in the configuration and weight calibration.
T050E is equipped with two serial lines, a primary bi-directional line and an auxiliary one with transmission only.
The primary is available in RS232 or in RS485 mode to operate in multidrop network. ADOS has implemented as standard both the logic protocol MODBUS and PROFIBUS-DP by the gateway IPBUS1 (option). On T050E is also available an analog output that can be configured for 0-10 V or 4-20 mA. One or four relays, according to version, can be associated to a function required by the application. In the overload control modality (option) the instrument can be associated to category 1 as a security device (UNI EN 954-1 12-98 norm). A new load cell signal averaging method FIR, linearization and user friendly approach are the best characteristics of this transmitter.
APPLICATIONS
Weight transmission
Overload control and lifting device applications
|
|
|
|
|
|
The indicator of weighing multichannel standard G4-PM developed by Vishay Nobel grew rich by a new special software for overhead travelling cranes and answering the European recommendations of standard FEM 9.755.
Goatskin bottles the traditional functions of weighing of G4, it will be possible to manage the sensors individually, to carry out the sum and the difference between sensors, to manage the loads raised by principal lifting, but also by auxiliary lifting, and to control the various movements of the overhead travelling crane: Lifting, translation, displacement.
The G4-PM will record then:
Office pluralities of the raised loads
Raised maximum loadings
Detections of overloads (number and duration)
Times of uses of the various movements and their number
Times of use of auxiliary lifting
Detections of levels (32 maximum.) with time and durations
All this information then is taken again and calculated according to a formula given by standard FEM 9.755 and is compared with the rated capacity of the overhead travelling crane.
This information then makes it possible to calculate the cycles of preventive maintenances of the overhead travelling crane according to recommendation FEM 9.755.
|
|
Loadcell - KISD-6
Main data
Rated load (R.L.) kN 50, 100, 200, 400, 1000
Combined error (terminal) % of R.L. ± 0,1
Repeatability % of R.L. 0,02
Overload, safe
(ref. to rec. loading point) % of R.L. 100
Side load, safe % of R.L. 100
|
|
|
|
|
|
The group of weighing manual labelling I 500 makes it possible to carry out the labelling of the fresh produce in the small boats under films.
Of a great facility of use thanks to its touchscreen, I 500 gives access easily the operations of weighing labelling (use, programming).
I 500 was designed for an integration in the corporate network (operation multipost, exchange of information by network, Ethernet TCP/IP or key USB, connection to the databases of the company.
Its great memory size is the guarantee of a traceability total (number of operation and single DSD, management of the batches, data of traceability skeletal per family of products.
For a faster seizure of the data, the terminal I 500 can be equipped with a keyboard of the type PC and a reader of bar code.
The group I 500 is composed:
Of a terminal of weighing I 500:
- an accessory measures
- 2 ports series
- 1 parallel port
- 1 port USB
Of a platform R1 DLS
Of a printer P950 or P970
Of a key USB 64 Mo
Of CD creation of labels
In option:
- second printer
- second and third ways of measurement
- Ethernet port
|
|
GH
GH is a modern labeling device for flexible, variable-weight pricing and labeling. A rational solution for labeling larger quantities of merchandise, it can be used with different load receptors of different sizes and weighing ranges and is available in the form of a desktop or free-standing unit with stand or installation frame.
|
|
|
Sartorius offers mass comparators for calibration and verification of weights and mass standards in national primary standard laboratories, calibration laboratories as well as in laboratories of verification, weights and measures, and metrology offices.
|
|
|
|
|
|
The LW 01 incorporates all the advantages of a field proven MULTIPOND combination weigher, with a mobile lift system. It can be used at various positions of a packaging line, as required.
The motor driven elevation adjustment with programmable positions, allows for the LW 01 to be easily adapted to varying transfer heights. When moved to the lower end position, all product leading parts are comfortably accessible, making cleaning very easy. The entire system is mounted on caster wheels and can be wheeled to a cleaning area as needed.
Standard features of the LW 01 Series
- Compact, dust and water-repellent design, for use in wash down environments
- Feeding tray drives integrated into machine body, therefore well protected against environmental influences
- Dehumidifier in weigher housing drains condensation moisture
- Frequency adjusted drives ensure ideal product conveying characteristics
- Temperature compensated strain gauge weigh cells, with integrated calibration weight for automated calibration, ensure high precision and controlled availability
- Automated, programmable zeroing sequence allows to account for product residuals in the weigh buckets
- Compact, modular control system including:
– 32-bit-technologie
– self diagnostic system
– extensive help text
- Various, self optimizing trending routines
- Programs can be saved locally and/or on memory cards
- Statistical reports according to European Weights & Measures legislation
- Operator interface – 12" TFT colour display with touch screen
|
|
|
|
Weighing, Scales
