|
|
SSI
Preset Input
Preset Button and LEDs
Hollow Shaft
Additional Incremental Output
Transfer Distance up to 1,200m |
|
Specifications Ethernet Inferace
Integrated Web Server
LEDs for Status Indication
Integrated T-Distributor
Connection Cap With M12 Connectors specifications
Ethernet TCP/IP
Communication Via TCP, IP, HTTP, SMTP, UDP
Transmission Rate = 100 MBits/s
Modbus TCP/IP Also Available
Powerlink
2-Port Repeater For In-Line Cabling
Supports Powerlink V1 and Powerlink V2 Protocols |
|
Profibus DP
All Common Transmission Rates up to 12 MBaud
Accredited by Profibus User Trade Organization
Programmable According to Class2 Professional encoder Profile
Additional Features Including Velocity Output, Software Manufacturer of limit switches, and a Teach-In Option for On-Site Gear Ratio Determination
Expanded DPV2 Functionality (Isochronous Mode and Slave-to-Slave Communication)
Connection Cap With Screwed Cable glands supplier or Integrated M12 Plugs |
|
CANopen
Certified by CiA
Communication Profile According to DS 301
Device Profiles DS 406 or DS 417 (for Lift Applications)
Programmable According to Class 2
Transmission Mode: Polled Mode, Cyclic Mode, and Sync Mode |
|
In addition to our encoder range, we market a wide range of mechanic and electronic accessories like :
- flange, coupling, DAC, etc...
- Professional digital displays for industrial encoders : measures and display of angular position, linear movements, linear and rotation speed, differential scale function, signal processing devices : multi-channel professional amplifiers, D/A converters etc... |
|
Accessories
Interconnections, Measuring Wheels, Couplings, Adaptor Flanges, Mounting Brackets |
|
These accessories are available to complete the professional encoders’ series:
· flexible fittings
· fixing vices
· pinion and rack
· reducing sleeves, for hollow shaft encoders
· mating interconnection and connection cables
· metric wheels
· mounting bells
· adapting flanges
· Eex housings
|
|
Supplier of connectors, shaft joints, draw-wire units and measuring professional wheels are just part of Leine&Linde's line of accessories. Accessory cables, connectors and all the other accessories that can be used in an application should always maintain the same high quality as the professional encoders Leine&Linde deliver. The best way to guarantee that the accessories are of this high quality is to use only accessories that have been verified regarding operation and performance and are offered as Leine&Linde accessories.
|
|
AMO's proven and original technology for length and angle measurements uses techniques for scanning high precision graduations
consisting of structures photo-lithographically etched onto steel. Based on this, inductive transducers and integrated evaluation electronics
(in ASIC) have been developed further, to create a new and powerful generation of industrial measuring systems.
® The AMOSIN angle measuring systems are open hollow-shaft measuring systems, and generally therefore do not have their own
manufacturers of bearings, nor do they require any couplings for mechanical connection.
® Operating entirely on an inductive basis, the AMOSIN systems achieve high precision figures as close as +/- 5 µm arc length, but
are nevertheless ver y well able to resist environmental influences such as dust, humidity and so forth, and also feature extremely high
resistance to shock and vibration.
The high precision is mainly due to the procedure used to manufacture the rigid steel measuring ring, and to the exceptionally high
quality sensor signal, with deviations in the sine wave down to < 0.1 % harmonic content, as a measure of the achievable interpolation
precision within the grating pitch. |
|
Angle industrial encoders
The term angle encoder is typically used to describe encoders that have an accuracy of better than ± 5" and a line count above 10000. These devices are used in applications such as NC manufacturers of rotary tables, swivel heads of unit tools, dividing apparatuses, high-precision angle measuing tables, precision devices in angular metrology, professional antennas and telescopes.
Shaft encoders
Rotary encoders from HEIDENHAIN serve as measuring sensors for rotary motion, angular velocity and also, when used in conjunction with mechanical measuring standards such as leadscrews, for linear movement. Application areas include electrical motors, machine tools, professional printing machines, woodworking machines, textile machines, professional robots and handling devices, as well as various types of measuring, testing, and industrial inspection devices.
With incremental angle encoders and rotary encoders, the current position is determined by starting at a datum and counting measuring steps, or by subdividing and counting signal periods. Incremental encoders from HEIDENHAIN feature reference marks, which must be scanned after switch-on to reestablish the datum. Incremental rotary encoders with commutation signalssupply the angular shaft position value - without requiring previous traverse - with sufficient accuracy to correctly control the phases of the rotating field of a permanent-magnet three-phase motor.
|
|
The RESR and SiGNUM%u2122 RESM angle industrial encoders feature a ±5 arc second professional scale graduated axially onto a stainless-steel ring. Available in a range of 20 diameters (from Ø52 mm to Ø550 mm), Renishaw's angle encoders have a low cross-section and a large internal diameter to position easily around large internal rotors, payloads or services.
The rings also feature a unique taper mount which corrects for eccentricity of the rotor/shaft and ensures excellent accuracy, offering easy and robust fine adjustment of the ring's form and all installation tolerances. In addition, the rings offer a very low moment of inertia ensuring that whatever the installation, the system can be positioned with minimal torque and maximum speed.
|
|
Angle Sensors, contactless
Series RSC (VX)
RSC2800 Serie 100, Serie 600, Serie 700
The contactless sensor utilizes the orientation of a magnetic field for the determination of the measurement angle. Therefore, a magnet is attached to the sensor shaft, the magnetic field orientation is captured with an integrated circuit. An analogue output signal represents the calculated angle.
The housing is made of a special highgrade temperature-resistant plastic material. Fixings are in the form of elongated slots which allow simplicity in mounting together with ease of mechanical adjustment.
The special backlash-free push-on coupling ensures extremely quick and simple installation. The transducer is not sensitive to either dirt or dampness.
Electrical connections are made via a shielded cable with 3 lead wires which is sealed into the housing.
Special features
- non-contacting, magnetic
- electrical range 30° up to 180° in 10°-steps
- available with push-on coupling or marked shaft
- simple mounting
- protection class IP54 or IP65
- long life
- 5 V-variant fullfills e1-standard
- internal resolution 13 Bit
- independent linearity ± 0,5%
|
|
PRAS1: Contact-Free 360° Angle Sensor in Ultra-Compact M-12 Housing
ASM GmbH sets the new benchmark for angular position detectors with the new development of a magnetic angle sensor in a very compact M12 housing. The PRAS1 sensor provides absolute position measurement over full 360° sensing range and is part of the successful POSIROT® family of magnetic angular sensors. With only a 1/2 inch diameter and overall length of less than 2 inches, this small sensor saves space and can be installed in the tightest locations.
The contact-free and wear-free angular measurement of 0° to 360° is achieved by using a position magnet. PRAS1 has a typical resolution of 0.1° and yields an analog signal through the use of a D/A professional converter. Three different analog outputs are available: 4-20 mA, 0.5-4.5 V and 0.5-10V. The industrial housing is rated up to IP68.
With its dependable and rugged design, the PRAS1 angle sensor is well suited for angle monitoring in a wide variety of heavy duty applications such as factory automation equipment, variable cock controls, mobile working machines, etc.
|
|
| The QR angle sensor is designed to measure non contact rotary displacement from 0 to 360 degrees without mechanical stop. A magnet needs to be fitted to the rotating axle and the sensor can be mounted opposite with a maximum 5 mm gap. This gives plenty of room for mechanical tolerances in extreme circumstances. In combination with our robust QUADRO® (PDF) housing you get a accurate sensor that withstands a few knocks. We supply a range of electronic input / output options with 8, 10 or 12-bits resolution to cater for the wide range of applications. Custom design housing with or without integrated magnet are an option. |
|
| The Schaevitz® line of rotary position transducers offers high reliability for absolute rotary position measurements in a range of specialized applications. Standard features include a non-contacting design, 120 degree measuring range, 360 degree free rotation, virtually infinite rotational life, infinite resolution, a wide operating temperature range and a fully signal-conditioned output. Applications include industrial controls, cock position, robotics and throttle controls. |
|
The compact DFP-2 is perfect for use in use in dancer control applications with the MAGPOWR VERSATEC™, and in dancer and follower arm applications with the DFC-90 and FAD. It offers the same exceptional sensing performance as the original DFP sensor, but in a lighter duty low cost housing.
And what's already included in the DFP-2 is a servo type spider coupling to allow for misalignment in shaft-to-shaft applications as well as fifteen feet of shield cabling for ease of installation. |
|
The combination of a coder with ends of the road in the same case increases the reliability and the safety of the machines, because of two independent checking circuits in the same case.
The coder integrated provided information uninterrupted of the movement in 5-30 VDC with a resolution from 100 to 5000 increments. The programmable ends of the road, the catch of origin are regulated freely with the position wished.
The adjustment of the ends of the road is very simple: the case is assembled on the machine, the machine is then led manually to its limiting position, the end of the road is positioned with a key of programming. This procedure is repeated for the other end of the road.
The case is well protects by its cap against dust or any external intervention; all the signals are cabled on a manufacturers of connector with the back of the case.
These cases can also be provided with potentiometric.
COMP' AUT will be able to best advise the customer in the choice of the case being appropriate for its application.
|
|
| The MLX90609 Angular Rate Sensor is a full gyroscopic system. A single SMD package contains a high performance Silicon micro machined sensor with signal conditioning circuitry. It operates from 5V supply and is designed for demanding automotive applications. The MLX90609 delivers two output signals proportional to the angular rate parallel to the assembly surface. One of the output signals is in an analog voltage format (the output is 2.5V at zero angular rate and the full scale angular rate produces an output of 4.5V or 0.5V depending on direction of rotation) and the other one is in a digital SPI format. |
|
The collapse of magnetic field due to the interruption by a ferrous gear tooth provides an analog signal output (sine wave) that does not require an outside power source. Variable reluctance sensor or Mag-pickup is suitable for speed sensing with a range from 30 to 1000 inches per second with a target gear from one tooth per revolution to 32 pitch gear.
|
|
For spare parts enquiriesplease see our website.
www.tamagawa-seiki.com/english |
|
Absolute encoders are devices used to measure lengths or angles and are used as distance gauges in line tools, in handling and automation technology and on testing units.
Absolute industrial encoders
These output positional information in the form of a numerical value (code). This numerical value is unique across the entire resolution range of the absolute encoder. For this reason no initial reference run is required, as is the case with incremental encoders.
With shaft encoders, a distinction is made between single-turn encoders, which provide a resolution on just a single rotation and then revert to 0, and multi-turn encoders that provide a resolution over several rotations. A further distinction is made between optical and magnetic encoders. |
|
| Absolute encoders have a unique value (voltage, binary count, etc) for each mechanical position. When an absolute industrial encoder is turned on, the position of an absolute encoder is known. |
|
A speciality of these industrial measuring systems is the ease with which it can be integrated into customers existing mechanics, regardless of
whether the mechanical parts are supplied to us for integration of the measuring ring, or whether AMO manufactures the special
mechanical parts, incorporating the scale body, in accordance with customers' drawings. |
|
BEI IDEACOD industrial encoders convert any position, movement, speed or acceleration into digit al information for any machine controller or PLC SUPPLIERS. The various combinations of optical disks, output circuits, output connections, shaft diameters and couplings give BEI IDEACOD one of the broadest ranges of encoders on the market.
Absolute Single-turn
Absolute Multi-turn
ATEX Certified
Incremental |
|
Integrated with the motor
Diameter matching the motor type
Extremely low current consumption
Extremely light and compact
Available in analog and incremental output
Easy to interface
Custom systems available from design to production
|
|
|
|
Angular encoders, Angular sensors
