|
|
| Products 121 to 150 of 299 |
Level Measuring Instruments for Solid
Rotary Paddle Level switch manufacturer, Air Hammer, Pneumatic vibrator, Vibrating Probe Level Switch, Microprocessor Based Bargraphic Display Scaling Mter, Capacitance Level transmitter, Electromechanical Level Measuring System, Ultrasonic Level Indicator, TDR Radar Level Professional transmitter, FMCW Radar Level Transmitter, Admittance Level Switch, Capacitance Level Switch etc. |
|
SOLIBA - Tilt manufacturer of level switch for solids
High level detection in non-explosive zones
Especially designed to stop the filling of silos containing cereal, grains, flour, animal food, polyethylene granulate, wood dust, cement, lime, etc.
Compact, resistant and simple device. Ready to be used. It does not need any maintenance. |
|
Float Type Suppliers of level switches
Flotect® Liquid Float switch - Model L4
Explosion-proof, Leak-proof, Brass/SS Housing
Flotect® Liquid Float Switch - Model L6
Explosion-proof, Leak-proof, Brass/SS Housing
Flotect® Liquid Float Switch - Model L8
Leak-proof, Weatherproof Optional, Low Cost
Chamber Type Level Switches
Chamber Type Level Switch - Series 123/125
Operating Pressures to 150 psi, Snap Action Type
Chamber Type Level Switch - Series 102/1102
Operating Pressures to 300 psi, Flanged Chamber
Chamber Type Level Switch - Series 500
Operating Pressure to 400 psi, Adjustable Deadband, Weatherproof
|
|
LEVEL LIMIT VALUE
- capacitive suppliers of level switches for liquids and bulks, lateral
and vertical installation, PNP exit, also for aggressive media, also for
strongly got dirty suitably.
- opto-electronic level switches made of high-grade steel for liquids, that
lateral and vertical installation, PNP exit, remarks for high
Temperatures and pressures, hygenic applications
- Manufacturer of float switches from high-grade steel and plastic one, for lateral and
vertical installation, switching contacts reed switches, up to 4 switching points,
customized remarks |
|
| OPTISWITCHes are available in a number of variants: with short and long paddles, coated and uncoated, and made of various metals and alloys. The OPTISWITCH 5000 is designed for liquids; typical applications are overflow and dry-run protection. The OPTISWITCH 3000 supplements the KROHNE product range in this sector by switches for solid materials, mainly particulates with a bulk density upwards of 0.02g/cm3. |
|
Convincing Advantages
- easy and reliable method to monitor fluid levels
- proven float principle
- easy side installation using threads ¾" or ½" BSP
- potential-free contact as signalling industrial transmitter
SIKA-level controller in service as
- run dry protection for pumps (minimum alert)
- spill protection (maximum alert)
- leakage monitoring
- screwed-connection oil level monitoring gauge, e.g. at compressors suppliers |
|
ATS 165 EP, ACS certified (ACS: Certificate of Sanitary Conformity)
ACS certified float level switch for a mandatory use in drinking water (EP) meant for human consumption.
This float level switch supplier is connected to the pump to perform an automatic regulation. It has been specially designed for use in very agitated liquids and its 165º switching differential avoids excessive jerking of the pump.
Application exemples: Tanks and reservoirs of drinking water.
For multilevel regulation in drinking water, we propose the SOBA EP, ACS certified which has a 25º switching differential. |
|
Level switch manufacturer applications are found in all types of production, including the food indutry, for monitoring one or more high/low levels on fluids or bulk material.
This is applicable on all kinds of vessels e.g.:
storage tanks
hot product bunkers
stirrer vessels cyclones
sluices
feeder chutes etc.
|
|
"The Nivotemp M series from Buehler comprises a group of controllers for the control of both liquid level and temperature in fluid power packs or lubrication systems.
The installation via a central thread is cost effective and allows the use of a small float with good boyancy.
Despite small physical dimensions the Nivotemp M has a series of adjustable bistable contacts.The number of contacts is determined by the type of the connector specification as you can see from the data sheets.
The use of bistable contacts allows the float to operate a number of contacts.
liquid level and temperature in one unit
adjustable contacts
bistable = just one float
float with good buoyancy
industrial electrical connector included
easy installation
maintenance free" |
|
Gems Sensors, Inc. is a leading manufacturer of level switch manufacturer products, pressure switch manufacturers instruments, flow switching devices, and liquid level control units for use in a broad range of fluids across the industry. Gems products feature an ever-expanding selection of sensing technologies including: electro-optic, ultrasonic manufacturers of level sensors, float type, CVD, thin professional film, piezo-resonant, capacitance, hall effect and conductance products and services.
|
|
Nivofix NW1-020HM/HK
Mechanical Level switch supplier for liquids with magnetic
triggering of an adjustable rees switch.
high switch capability
wall mounting
reliable
good repeatability |
|
The horizontally mounted L070 is a rugged, hazardous duty level switching providing a safe, isolated switch closure for monitoring high and low liquid levels. With an all stainless steel construction and ultra-light float, the L070 provides high performance in most any media and can be adapted to sense dissimilar fluid interfaces within a 0.1 differential.
FM approved for Class I, Division 1, Groups C,D,E, F & G hazardous locations, the L070 also features a water-tight switch enclosure with a standard ½" NPT conduit connection and can be installed for either normally open or normally closed switching. |
|
Soba Ex, ATEX certified
Compulsory for multilevel regulation in sewage pumping stations with explosive risks 0, 1, 2 (gas) & 20, 21, 22 (dust) |
|
Ultrasonic Manufacturer of level transmitters
Ultrasonic Level Transmitter - Model UT
±0.25% Accuracy, 10 ft. Range
Submersible Level Professional transmitters
Submersible Level Transmitter -Series PBLT2 & PBLTX
316SS Construction, ±.25% Accuracy, Lightning & Surge Protected, Intrinstically Safe
Submersible Level Transmitter -Series SBLT2 & SBLTX
316SS Construction, ±0.25% Accuracy, Lightning Protected or Intrinsically Safe
Liquid Level Transmitter
Piezoresistive Level Transmitter - Series PLT
Loop-Powered, ±0.25% Accuracy
|
|
| The vertically mounted TR420 with integral signal conditioner provides a reliable 4-20 mA proportional electronic output in tank levels up to twelve feet. Available with stainless steel, polypropylene or Buna floats and a wide selection of mounting styles and materials, the TR420 can be used to input programmable logic controllers, meters and other digital professional receivers for accurate and continuous measurement in many liquid level applications. The variety of float styles and densities afford the best and most direct means for continually monitoring surface interfaces of dissimilar liquids in a single tank. |
|
| Mini Float, Magnetic Level Float switch, Magnetic Float Level transmitter, Side Mounting Float Switch, Cable Float Switch, Thermal Dispersion Flow switch, Flow Switch, Optical Level switch, Proximity switch, Capacitance Level Switch, Vibrating Probe Level Switch, Capacitance Level Professional transmitter, Pressure Level Transmitter, Magnetostrictive Level Transmitter, By-Pass Level Indicator, TDR Radar Level Transmitter, FMCW Radar Level Transmitter, Ultrasonic Level Indicator. |
|
The LL series Liquid Level Sensor uses an optoschmitt trigger which provides a digital output that indicates the presence or absence of liquid. These components require user supplied external circuit protection.
The LLN series Industrial Liquid Manufacturer of level sensors are designed for harsh industrial environments with extremes in temperature, pressure, vibration, and shock. The LLN series are sealed to meet IP67 and have reverse polarity and overvoltage protection. Housed in stainless-steel, the LLN series has long life and is easy to clean. The LLN series terminates using industry standard Quick-connect interconnections. |
|
Level sensors suppliers are used to detect the level of liquids. In contrast to mechanical limit switches suppliers the switch points can be freely selected within the measuring range. One level sensor can replace up to four binary switches. Another advantage is direct level indication on the display. Adjustment to the medium is done automatically. The sensor is suitable for many liquid media.
> Reliable function even in coolant applications
> No time-intensive cleaning of mechanical components
> One sensor for all media – no adjustment necessary
> Selectable switch points for applications as required
> Direct level indication by LED display
> Modular concept saves time and money |
|
Soba VR ECO
Perfect for a use as a high level "security alarm" and/or for a multilevel regulation with several pumps in waste water, sewage water, polluted water, clean water, etc.
This model also exists in a smaller size for pumping stations with limited space. |
|
The Pointsense Model LL-101 Liquid Level switch
is the ideal solution to a host of liquid level sensing
and control applications. It uses proven ultrasonic
technology to operate in virtually any liquid,
regardless of viscosity or aeration. Its small size and
standard 3/4" NPT mounting make it the perfect
choice for new or existing applications. The LL-101
consists of a 316LSS sensor and an integral miniaturized,
encapsulated electronic professional control unit which
is mounted in a cast aluminum, explosion-proof,
watertight enclosure. |
|
Gems Sensors, Inc. is a leading manufacturer of manufacturer of level switch products, pressure switching instruments, flow switching devices, and liquid level control units for use in a broad range of fluids across the industry. Gems products feature an ever-expanding selection of sensing technologies including: electro-optic, ultrasonic manufacturer of level sensors, float type, CVD, thin film, piezo-resonant, capacitance, hall effect and conductance products and services.
|
|
In Brass, Stainless Steel PVC and Nylon, this versatile range of point contact sensor can be in sizes up to 1 Metre long and can be fitted internally or externally to the tank. With single float two point station switching, High and Low, and up to 3 stations possible.
|
|
|
|