|
|
| Products 211 to 240 of 297 |
USonic
US Series Transmitter using US-XX Series Electronics The USonic provides a non-contact Ultrasonic measurement in a 2-wire 4-20 mA, Hart output signal with internal characterizations for Open Channel Flow, Level, Distance and Volume. A 30 ft. measurement range with 0.15% accuracy. Suitable for all Class I Div. 1, Zone 0, I.S. or XP locations. SmartGain circuitry ignores most internal vessel obstructions.
USonic-R
USonic-R Series Transmitter using USR-XXXX Series Electronics USonic-R provides a non-contact Ultrasonic measurement in a 2-channel system with (2) 4-20 mA output, allows two independent non-contact measurements, or sum or differential measurements. Modbus output signal with internal characterizations for Open Channel Flow, Level, Distance and Volume. A 30 ft. measurement range with 0.15% accuracy. Wall mounted controller suitable for all Class I Div. 2, Zone 0 locations, with sensors I.S. for Class I Div. 1 locations. SmartGain circuitry ignores most internal vessel obstructions.
Universal Sonic - 505-5100 Series
505-5100 Series Transmitter using 405-5100 Series Electronics The 505-5100 Series is a Line powered Ultrasonic measurement with range to 80 ft. Suitable for all Class I Div. 1, Explosion Proof locations. Internal circuitry ignores most internal vessel obstructions. |
|
Siemens ultrasonic level measurement products are the cost-effective choice for monitoring and control in short- to long-range applications for liquids, slurries, and solids in a wide range of industries. Non-contacting technology offers low maintenance advantages. Siemens is the world leader in ultrasonic level measurement technology, with many models available and strong application experience to support you.
Ultrasonic Transmitters
Ultrasonic Transmitters provide easy-to-use continuous measurement. These transmitters offer superior reliability for level, volume, and flow applications in the water and wastewater, food, and chemical industries.
Controllers
Extensive product range from simple single-channel controllers to versatile systems for the monitoring of ten measuring points.
Transducers
Wide range of transducers with various measuring ranges, applications, and process connections
|
|
Principle
The vibrating probe level switch is structured of two piezoelectric elements built on vibration kit inside pipe. One receives pulse signal from PCB and causes pipe to vibrate, and the vibration transmits to the other in order to output electric signal and it is sent to PCB. When the vibration of the pipe is paused when measuring the material surrounding it, PCB can not receive the vibration signal from the piezoelectric element and relay actuates on.
This enables the use in fail-safe due to few malfunction and high stable work.
This vibrating probe provides reliable & trouble-free level sensing for bulk solids. Simple mounting and calibration, high confidence in working, it is unaffected by material built-up and static electricity, and can withstand high lateral loads.
Features
No calibration needed, using friendly as well as sturdy and durable design.
Shed off build-up material. No fear about accumulated material on sensor.
High / Low fail safe modes offer safety and reliability.
According to different density, its adjustable sensitivity wheel button can be set even for finest material. |
|
For conductive liquids
Contact 2 contacts via relays
Connection G 1, G 11/2 male, 1 NPT, 11/2 NPT male
Material st. st., hastelloy, titanium
Max. pressure pressureless
Max.temperature 60°C
For conductive liquids (>20 mikroS/cm)
|
|
Compact vibrating level switch for liquids
For universal use as overfill or dry run protection system
All advantages in an overview:
- setup without adjustment
- screwed piezo drive
- SIL 2 qualified
- product-independent switching point with high reproducibility
- wear and maintenance-free
- instrument from the plics® family
Version: standard version
Material: 316L; Hastelloy C4; enamel; ECTFE; PFA
Process: fitting from G¾A |
|
The V-Tork is a point level switch that is designed to detect low or high level of liquids, thick and turbulent fluids, as well as corrosive mediums and pastes (depending on viscosity). Due to its simple and rugged controlled system, the V-Tork is virtually unaffected by any chemical or physical properties of the mediums and can be installed at any angle of the pipe or tank. It is ideal for multiple-purpose processing where the probes must be compatible with a variety of process materials and process conditions. The V-Tork does not require recalibration between batches and can also be cleaned in place.
The V-Tork can operate in temperatures up to 176ºF (80ºC) and has a maximum working pressure of 725 PSI (50Bar).
Standard probes are available with 3/4” up to 1” BSP or NPT process connection and insertion length L= 3 1/8” (L= 80mm).
FEATURES
*Unaffected by variations in density, conductivity, or dielectric constant.
*Unaffected by foam, tank agitation or vibration.
*Various length options to best suit your application.
*Made with 316 S.S. and can be PTFE coated.
*Relay and Transistor outputs available.
*Thread, Tri-Clamp, Hygienic Fittings, Flanges, etc.
*Polished Forks - RA tested when necessary
*3A approved |
|
VEGASWING:
Versatile use in liquids
The piezo drive is the heart of VEGASWING, actuating the tuning fork on its resonance frequency. The frequency of the fork falls when being immersed. The frequency change is processed by the integrated oscillator and converted into a switching command. The piezo drive is screwed to ensure reliability and ruggedness. With the tuning fork of only 40 mm length, VEGASWING 60 works reliably in all liquids and mounting locations. Pressure, temperature, foam and bubbles and even viscosity do not affect the switching accuracy. Even pipelines with a nominal width of DN 25 are no problem.
VEGASWING 60 is the universal level switch for all applications.
Advantages
- Virtually independent of product characteristics
- Level detection up to +250°C
- Short tuning fork of 40 mm
Applications
- Level detection of liquids
|
|
Applications:
- Detection of high, intermediate or low levels
- Non sticky powders and granulars (<10mm)
Advantages:
- No moving parts
- Large self cleaning single blade
- Easy to install
- Adjustable sensitivity
- Multiple probe lenghts
- Multiple products can be detected in the same silo
- Minimum material density : 0.03
- Maximum working pressure : 10 bars
- Die cast aluminium |
|
| The Pulsarpoint 200 series range of point level measurement systems offers the very latest state of the art technology applied to the well respected vibrating blade principle of operation. All units in the range are manufactured to the highest standard from 316 solid stainless steel for maximum strength durability and corrosion resistance. Series 200 provides highly reliable, fixed point level indication or control with a repeatability of 1mm or better. Versions are available to measure solids and slurries with relay output. The Pulsarpoint 200 series uniquely combines solid rugged construction with high sensitivity to produce maximum reliability. The unique blade design allows 'tip sensitive' control and the unit does not react to troublesome material build up on vessel walls. Standard units may be extended using fixed or flexible extensions to suit the application. |
|
Features:
- Especially suited for applications in fine grained and powdery bulk goods
- Simple and reliable function principle, maintenance free
- For difficult applications with high mechanical loading
- Short insertion length allows installation in very limited spaces, e.g. down pipes
- Favourable design to avoid build up between the forks
- Detection of solids in liquids
- Robust die-cast aluminium housing
- Enclosure IP 66
- Certified for hazardous locations (gas and dust) |
|
The vibrating rod of VEGAVIB is actuated via piezoceramic elements. If the vibrating rod is immersed, the amplitude will be damped. The amplitude change is processed by the integrated oscillator and converted into a switching command. Due to the rod design, it is nearly impossible for material, e.g. granules, to get wedged in. Typical applications are overfill or dry run protection systems, e.g. in flour, milk powder, sand, cement, plastic granules, styrofoam and down feathers. Even products with a specific gravity up to 0.015 g/cm³ (15 g/l) can be measured. An adjustment with medium is not necessary as the mounting location and the granulation size do not affect the measurement.
Advantages
- Virtually independent of product characteristics
- Optimum rod configuration for solids
- Easy cleaning
Applications
- Level detection of solids
|
|
One instrument, three functions: level indicator, level switch, and level transmitter !
WEKA Magnetic Flag Level Indicators provide three important functions in a single instrument, independently of one another: level indicator, level switch (user adjustable over the full range), and level transmitter with electrical signal output. The visual readout does not require electric power supply for its functioning, and indicates liquid level in a vessel through a directly-connected chamber, based on the phenomenon of a liquid having the same level in connected vessels. Level readout is guaranteed in all circumstances. These level instruments are therefore ideal for use during commissioning stages, as well as for back-up functions in process plants.
|
|
| ... products without technical information |
| |
|
|
Level sensors
