|
|
Radar Level counter for distance, level and volume of liquids, pastes and solids
OPTIWAVE
works better than any radar ever before.
In contrast to earlier radar devices, the new OPTIWAVE with its more advanced design solutions is able to operate over a larger bandwidth. This ensures a sharper resolution and higher accuracy. The higher signal dynamics of OPTIWAVE allow the detection of even the smallest level changes.
|
|
| The 4790 Continuous Gamma Level System raises the standard for non-contacting nuclear level measuring. The non-contacting and non-invasive design makes the 4790 ideal for abrasive, corrosive, high pressure and high temperature applications regardless of vessel shape or size. |
|
Continuous Level measuring
The external mounting and the non intrusive arrangement of a continuous level measurement are some of the outstanding advantages, that determine it for various applications like:
high- and low-pressure reactors
agitated vessels
bunkers
suppliers of autoclaves
hot material industrial containers, etc.
No matter, what the physical- and chemical properties of the measured product are nor what the shape of the vessel is.
|
|
High frequency microwave impulses are coupled to a cable or rod and guided along the probe. The impulses are reflected by the product surface and received by the processing electronics.
Due to this measuring principle, the comprehensive adjustment with the product is no longer necessary. The instruments are adjusted to the ordered industrial electrode length. The shortable cable and rod versions are suitable for individual adaptation to the local conditions.
Even process conditions such as high dust and noise generation or strong steamy atmospheres do not influence the accuracy of the measurement.
Density fluctuations, different granulation or even fluidising do not influence the accuracy. This applies also to the change from dry to wet gravel.
Strong build-up on the electrode or on the vessel wall does not affect the measuring result.
With measuring ranges up to 30 m, the sensors are also suitable for high vessels. Temperatures up to 150°C and pressures from vacuum up to 40 bar cover a wide application range.
By using a coaxial guide tube, VEGAFLEX 65 operates completely unaffected by vessel installations such as e.g. heating spirals or struts. A special adjustment is not necessary. |
|
Level sensor manufacturers acc. to the measuring principle of the guided microwave (TDR)
For universal use in heavy solids and liquids
All advantages in an overview
- setup without adjustment
- independent of product features
- insensitive to dust, vapour and buildup
- probe can be shortened
- signal processing ECHOFOX for echo analysis with Fuzzy-Logic
Version: with exchangeable cable (ø 6 mm) or rod (ø 16 mm)
Measuring range cable: up to 60 m; rod: up to 6 m
Process professional fitting: from G1½A
Process temperature: -40 ... +150 °C
Process pressure: -1 ... +40 bar (-100 ... +4000 kPa)
Accuracy: ±5 mm |
|
Guided Radar (TDR) Level measuring device
for distance, level and volume
of liquids, liquid interface, pastes and solids
OPTIFLEX
works better than any guided radar ever before
In contrast to earlier guided radar devices, the new OPTIFLEX with its more advanced design solutions has higher signal dynamics. Sharper pulses measure thinner interfaces. The very good time base stability allows better reproducibility, which translates to better trustability.
|
|
Eclipse® industrial transmitters are loop-powered, 24 VDC, level transmitters based upon the revolutionary Guided Wave Radar (GWR) technology and can be utilized on virtually all level metering and control applications.
Application conditions include processes exhibiting visible vapors, foam, coating or buildup, surface agitation, bubbling or boiling, high fill/empty rates, low level and varying dielectric media or specific gravity.
In addition, Eclipse reliably handles interface level measurement and control applications with a clean distinct interface, including those with changing specific gravities and visible vapors.
Choosing the proper Eclipse probe is the most important decision in the application process. With this in mind, Magnetrol offers 19 probe designs to choose from.
Eclipse features IS, XP and Non-Incendive approvals, optional HART® or Foundation Fieldbus® communications, and quick connect/disconnect probe coupling.
Contact us to learn how these leading-edge transmitters provide performance well beyond that of many traditional technologies. |
|
Advantages:
- High accuracy fill level metering
- Up to 80 times overload resistance
- Various food flanges
- Suitable for CIP and SIP cleaning
- Connection housing in steel or plastic
- with clamp manufacturer room, plug M12x1 or mounted cable
- Electronic rotatable by 330 degree
- Integrated digital 4...20mA 2-wire-electronic or 0...10V 3-wire-electronic
- Four-digit, very high brightness Light emitting diode display
- Two free programmable PNP-switching outputs,
- e.g. for use as two-position-controller
- Fast sensor adjustment by key combinations or menu controlled sensor adjustment by LED display
- Password protection
- Adjustment by customer specification |
|
| DIVELIX can continuously measure filling professional levels of liquids in storagetanks and containers. DIVELIX is applied where other detection are too big or cannot be used due to installations in tanks. DIVELIX is particularly suitable for professional oil and oily liquids, professional brake fluid, glycerine as well as glycol e.a. |
|
Hydrostatic Tank Gauging (HTG)
Enraf has been continually searching for new technologies and has developed remarkably innovative level measurement solutions tailored to your requirements. The techniques employed by Enraf tank gauging systems are complementary, yet each has its own advantage. The hydrostatic systems (HTG), which can be used in a mixed installation with SmartRadar manufacturer of level gauges and ATG and XTG servo gauges.
HTG is a system based on the use of intelligent hydrostatic industrial pressure transmitters. Basically this system is designed for direct mass measurement. In the process industry, this technology is common used for deriving a level indication. |
|
Level measuring by hydrostatic pressure
The use of a pressure transmitter specifications for the level measurement is an economical solution in particular for the chemical and petrochemical industries. The professional transmitter can be with direct or capillary mounted membrane seals.
These instruments can handle extreme chemical and mechanical loads and are no sensitive to electromagnetic interference. They can be used for all liquids, corrosive or not, and for closed or open tanks.
|
|
| in 2- and 3 way version, DN 15-150, Flanges DIN/ISO drilled to PN16- and ANSI Cl 150, up to 180°C (360°F) |
|
External display and adjustment unit
Suitable for external display of measured values and adjustment of the sensors
All advantages in an overview:
- digital and quasi-analogue display of measured values
- can be mounted up to 25 m away from the sensor
- inclusive PLICSCOM
- instrument from the plics® family |
|
With our new Industrial laser-Distance Sensors DLS-B you measure absolute distances up to 500 meters. Thanks to state of the art laser technology the DLS-B device measures with a precision of 1.5 millimeters. It represents a cost efficient solution even at extreme environment temperatures as low as -40° C.
The DLS-B is an optical measuring device. You can measure, maintenance-free, distances on natural and reflective surfaces. You determine positions on objects difficult to access or with very high surface temperatures. Just as well you can measure distances in an aggressive environment in an easy and accurate way.
Serial, analog and digital interfaces are standard features for the complete DLS-B product line. This enables you to easily connect the DLS-B to a control system (SPS, IPC or PC)
The DLS-B device runs in a “Stand-alone-mode” and independently executes all programmed functions. Thanks to the flexible range of functions an external display can be connected directly to the DLS-B device via interface RS232 or RS422. Via a digital input, measurements can also be activated from an external button or switch.
For easy configuration of the DLS-B devices, the necessary software is at your disposal |
|
Automatically controlling molten metal pouring processes can provide significant returns in terms of reduced cost, improved throughput and quality – as well as the ability to remove operators from dangerous environments.
LMI sensors are broadly used to provide accurate, sub-millimeter level information from the molten metal surface during pouring, in spite of the hostile smoky, high temperature environment
Our Metal applications division works closely with System Integrators & Original Equipment Machine Suppliers to deliver the most effective solutions for their particular sensor vision needs.
|
|
COSENSE INC Level and Distance Measurement is not just another level or proximity transducer supplier:
-Contact, Non-Contact and Non-Intrusive (sense "through" tank walls without penetration) Level and Proximity
-No moving parts, sanitary, flanged, multi-point, electropolished, switch output or analog designs, explosionproof, intrinsically safe
-No calibration
-Titanium, Tefzel, Stainless, CPVC, Monel....
-Cryogenic (-300F/-184C), High Temperature ( 750F/398C)
-Subminiature with .0005 inch (.013 mm) accuracy
-Full Scale measurements as small as .01 (.25 mm) can be used to measure inside test-tubes!
-Large robust designs and subminiature sensors
-Aerospace, bio-medical, nuclear, pharmaceutical, process, lab, semiconductor,automotive, power.....
-OEM and SPECIAL REQUESTS WELCOME
-COSENSE All Tefzel Level sensors suppliers, starting at $95.00 US Dollars, (relay contact or loop powered options) for use in practically any acid, caustic, water, oil, etc....
-COSENSE sonic and acoustic systems work independantly of conductivity, dielectric, color, opacity, density. Models for most applications available. Call, email or fax us for FREE ASSISTANCE and product information. If we don't have it, we may be able to design a custom solution just for you.
|
|
Dependable solid state devices to liquid level, photoelectric
temperature and process control
Operating on the principle of conductivity (the ability of a liquid to conduct electricity), Curtis Industries Liquid Level controls sense and control the level of almost any fluid or moist solid. These units are available with fixed or adjustable set points to control levels in fluids having an external circuit resistance up to 3,000,000 ohms. |
|
Dancer or Follower Arm? You'll find both operating modes applicable for the DFC-90 and DFC-A low cost tension controls.
Dancer Mode:
In dancer control applications, the DFC-90 and DFC-A are full PID closed loop dancer controls. They control web tension by sensing the position of the dancer arm through a DFP or DFP-2 Position sensor manufacturers and adjusting the professional clutch, brake or motor control torque accordingly to maintain the dancer position set point. An advanced control algorithm provides optimum control and ease of use.
Follower Arm Mode:
In follower arm applications, the DFC-90 and DFC-A control web tension by compensating for measured changes in the roll diameter. Roll diameter changes are measured through the DFP or DFP-2 Position Sensor and a follower arm. An optional Stop Multiplier provides additional stopping torque to help stop large unwind rolls.
Make quick setup adjustments using the easily accessible potentiometric. All adjustments are intuitive and clearly marked. |
|
| Microprocessor core modules are compact, powerful control devices for embedded applications that require I/O control, data handling, and peripheral connectivity. |
|
| A comprehensive modular system provides the basis for the configuration of individual level indicators – cost-efficient and directly suited to customer needs. Depending on requirements, we offer level indicators with almost any defined switching points, quasi-analog with dry reed resistor chains and a resolution of up to 5mm, industrial pressure sensors in plastic or stainless steel with ½ or 1 ½ inch threads and current or voltage outputs and low cost capacitive level indicators. The probes in the capacitive level indicators can be cut to length by the user and simply calibrated at the touch of a button. For bulk solids we offer silo switches. |
|
The microwaves detector detects the level in a industrial hopper or a clogging product and is any without contact with the product. In electronics off-set or integrated, the microwaves detector is composed two of units separated: the industrial transmitter and the professional receiver. Particularly used in binding applications: very high temperature (until 900°C/1652°F), high granulometry, obstruction, abrasive environments... This product does not require any authorization or specific training. Moreover, it’s without danger for man ; that why it’s one excellent alternative to the radioactive probes.
Our strong experience in bulk solid market enables us to propose you the most adapted solution for your application. Please Do not hesitate to contact us.
Technical data:
-------------------
Material temperature: -30°C (-22°F) to 65°C (140°F)
Material grain size: All
Ambient temperature: -30°C (-22°F) to 65°C (140°F)
Ingress protection : P 67
Manufacturers of power supply: 110/230 VAC or 24 VDC
In Option:
-------------
Material temperature: until 900°C (1652°F)
|
|
SMD Fluid Controls is focused on providing customized manufacturer of float switches and liquid level sensors suppliers at the costs of others standard products.
Click "More info" below, select the desired part and "Configure" your own part and we will be sure to give you quick and personal response. It's That Easy ! |
|
TUBA 1'' VR ECO
Level sensor for automatic regulation and level control for tanks and cisterns with very small diameter orifices.
Mainly used for tanks requiring mounting by the sides or for an installation with ballasts or fixed to a vertical tube.
Also available in 1''1/4 version. |
|
Application
The Vessel Check Unit
VesselCheck has been the first choice for hundreds of industrial and commercial users, with applications in a wide range of markets, from brewing and pharmaceuticals to the Nuclear Industry. All have specified VesselCheck for its accuracy, repeatability and for the Canongate Technology Service that comes with each system.
Features
The Vessel Check System
* High accuracy - to 0.1%
* Truly non-intrusive sensing technique
* Can monitor up to 16 tanks
* Automatic compensation for temperature and density
* Level & strength versions available
* Easy installation without professional tank break-in
* No moving parts, no drift, no recalibration
* Suitable for most tank sizes and materials
* Analogue and digital outputs available
* Option hard empty indication |
|
Tiltswitch Level Indicator
Level indicator for bins & silos
Suitable for almost all granular materials
Alarm is triggered when material build-up tilts sensor by approx 15°
Sensor cable adjustable up to 5m |
|
|
|
Level sensors
