|
|
| Products 151 to 180 of 202 |
Balluff Micropulse transducers are the rugged transducers for use under extreme ambient conditions with stroke lengths between 50 and 4000 mm. Various output signal options are available for integration into your specific control system. Processor cards with a variety of programming functions are also offered.
|
|
electronic offset and amplitude professional control leads to high interpolation- accuracy and further reduced sensitivity to contamination
Signal interpolation up to 100x
Signal processing electronics in the connector manufacturer
Mounting assistance by setup PROFESSIONAL LED in the connector
also available as ultra high vacuum version
|
|
Non-contact displacement sensors using eddy current technology measure distances, displacements, or positions of any electrically-conductive target. These objects may have both ferromagnetic and non-ferromagnetic properties. Due to the high insensitivity to oil, dirt, dust, moisture, interference fields, etc. the eddy current principle is ideally suited to applications in harsh industrial environments.
Eddy current transducers designed for industrial use in factory automation, for machine monitoring, for inspection and for measuring and testing.
|
|
Duncan's Linear movement Manufacturer of position sensors offer a wide variety of types and characteristics that give the designer several alternatives. All linear position sensors are made from infinite resolution conductive plastic, characterized by long-life and smooth, low-noise performance.
These devices are excellent replacement alternatives to linear variable differential transformers (LVDTs). Life ranges from 2,000,000 cycles (5 million dither cycles for such products as the 9600 Series Microminiature Linear sensor) to 100 x 106 traverses (up to 12" stroke derated proportionately for longer units). Shaft lengths, interconnections (threaded shafts, lead wire or terminal contacts), and special housing configurations are available. |
|
Features
- Extremly small dimensions of scanning head for crowded installation conditions
- High resolution and accuracy
- High interpolation accuracy due to electronic signal professional control
- Signal processing in the 15pin D-sub manufacturer of connector
- Integrated signal interpolation up to 100x in the connector
- Wide mounting tolerances
- Simple mounting of the professional scale tapes because of double-side adhesive tapes specifications
- Defined thermal behaviour of the DOUBLEFLEXscale tape
- Mechanical decoupled DOUBLEFLEX-scale tape Dynamic |
|
| Microprocessor chips have found their way into a surprisingly high number of products that are around us every day in our home, car and office. This explosion in worldwide demand has forced semiconductor manufacturers to enhance quality and throughput in ways never before imagined. Capacitec's microinch level positioning sensing systems assist chip processing and handling equipment manufacturers to sense silicon wafers for exact positioning prior to deposition, etching and other processing where generating unwanted particles is preferred. This is accomplished without coming into contact or damaging their highly sensitive surfaces. Other industries where sensitive surfaces must be measured damage free are professional printing professional presses, photocopier rollers, computer hard disc drives and molten materials. |
|
Designed specifically for use in hydraulic and compressed air actuator
applications, where the transducer is fitted inside the pressurised
environment. Can operate at pressures of 670 Bar and temperatures of +200C.
Seperate electronics module operates from 10-60Vdc.
Available in a choice of mounting styles (Internal or External), these
transducers can be supplied to suit actuator suppliers strokes up to 2000mm.
|
|
The POSIMAG length measuring system comprises an MR scanning head and a magnetic dimensional scale. The position is determined without contact and thus without wear or tear. This measuring setup supports resolutions in the µm range.
POSIMAG is suitable for linear, angluar and speed measurements.
Technical advantages:
Sturdy construction, contact-free and wear-free, shielded metal housing, protection category up to IP67, signal processing as standard with professional encoders, distance between the MR sensor head and the magentic strip up to 2 mm, measuring lengths of up to 30,000 mm.
Thanks to its special properties, POSIMAG is ideal for many industrial applications in the production of machinery, plants and precision equipment as well as research. For example: Metal and wood processing, manual tasks in industrial handling systems, positional checks for linear units, quality-control systems for sheet metal, punches and industrial presses.
|
|
DS Europe produces series PC magnetostrictive linear displacement transducers.
Measuring ranges: 0 to 100 up to 3000mmFS.
Outputs: 10V, 4-20mA, RS485, RS422, CANopen, SSI, Start Stop.
Advantages: no wear (infinite mechanical life), can survive harsh working conditions (vibrations, moisture and dirtiness), good resolution and price.
Applications: automation, hidraulic actuators suppliers, converting machines, center tools, packaging machines, paper machines, vehicles, professional presses, wood machinery, food machines, medical machines, quarry equipment etc. |
|
OPTIPACT Optical length and velocity sensor
- Contact-free optical measurement principle
- Measurement in 2 orthogonal axes
- Compact industrial design (120mm x 47,5mm x 42mm)
- Velocity range up to 4 m/s
- Detection of standstill and direction of motion
- Allows deviation from nominal working distance
- Suited for rough and smooth surfaces
- Measurement uncertainty <1 %
- Self adapting to measurement object
- Long life LED illumination
- Programmable via Graphical User Interface
- Protection class IP 65
- Price for one piece: < 1000€
|
|
Model 9717 Modular Linear encoder
- Scale lengths to 125"
- Resolution as fine as 0.5 µm with
HR2B & C incremental interpolators
- Non-contacting, friction-free operation
|
|
- Ranges from 50 mm to 12000 mm
- Single or Double Sealing
- Resolution 1 µm or 5 µm
- Signal out TTL RS422 Line Driver A, /A, B, /B and Z Reference signal ( every 50 mm )
- 5VDC Power Suplly
- IP 54
- Aluminium Body |
|
Optical Professional scales are Givi Misure's basic product. They are made in four different models, for each of which there are a number of variants. The documentation, supplied on request, stresses the high performance of these products.
|
|
Principle of operation: exploitation optoelectronics of a engraved stainless steel ribbon of utmost precision
Series SC
Races useful of 250 mm for 15000 mm
Resolutions: 100,10,5,1 microns
Sealing IP 54 or IP 64 (with pressurization)
Output signals: 2 signals 5V or 12 V out of phase with 90°
MINI series
For assembly in small overall dimensions
Races useful from 100 to 700 mm
Series PBS
With mechanical system of integrated guidance
Races useful from 170 to 4020 mm |
|
Electrical position indicators and combi switchboxes
Intelligent electrical position indicators with automatic commissioning and initialisation, available for quarter turn and manufacturer of linear actuators, field-bus capable combi switchboxes with integrated pilot cocks, customer-specific special solutions, versions for OEMs and other makes available
|
|
With our new Professional laser-Distance Sensors DLS-B you measure absolute distances up to 500 meters. Thanks to state of the art laser technology the DLS-B device measures with a precision of 1.5 millimeters. It represents a cost efficient solution even at extreme environment temperatures as low as -40° C.
The DLS-B is an optical measuring device. You can measure, maintenance-free, distances on natural and reflective surfaces. You determine positions on objects difficult to access or with very high surface temperatures. Just as well you can measure distances in an aggressive environment in an easy and accurate way.
Serial, analog and digital interfaces are standard features for the complete DLS-B product line. This enables you to easily connect the DLS-B to a control system (SPS, IPC or PC)
The DLS-B device runs in a “Stand-alone-mode” and independently executes all programmed functions. Thanks to the flexible range of functions an external display can be connected directly to the DLS-B device via interface RS232 or RS422. Via a digital input, measurements can also be activated from an external button or switch.
For easy configuration of the DLS-B devices, the necessary software is at your disposal. |
|
The company's product range covers rotary transducers with minimal dimensions and actuating forces through to sealed devices in heavy-duty cast enclosures.
Position transducers are produced in different models for stroke lengths of between 5 and 4000 mm.
A comprehensive range of components is available to permit the construction of integrated measurement systems. For large-scale production series and demanding special applications, Novotechnik works in cooperation with its customers to develop optimum solutions to problems. |
|
WaveScale Linear Displacement detection are an enhancement of the Series 2HX Electrohydraulic Industrial actuators. Cylinders with the WaveScale meet standard NFPA heavy duty industrial hydraulic cylinder dimensions, 2” to 6” bore with a male piston bar end. The main advantage is no false stage is required for cap mounts. The overall length of the cylinder is not increased!
3000 PSI Operating Pressure
Non-Linearity: ±0.02% of cylinder stroke or
±0.004 inch, whichever is greater.
Repeatability: Equal to resolution
Input Voltage: +24 VDC
Standard Operating Temperature: -40° F to 185° F.
Cylinder Stroke Length: Up to 100 inches.
Multiple Output: Analog - Voltage or Current
Digital - Start/Stop or PWM
|
|
| The Accumeasure 9000 is Ultra-high precision capacitive gaging system offering nanonmeter accuracy. It is ideal for a wide variety of displacement, position, vibration and dimensional gaging applications. |
|
Precision Displacement sensor CD4 series
High resolution Linear imager for high accuracy displacement measurement.
Electronic shutter controls receiving light level to minimize error. 7 models with different
spec are available for different application. Amp and sensor head are separated and the head
is small enough to install on movable part of system and limited space. |
|
Optical transducer system
Contactless away and manufacturer of vibration measurement
Fiber-optic sensors for distance measurement and vibration measurement work contactlessly and represent a favorable alternative for measurements in the finishing technique. Typical applications here e.g. are:
Movement collection of the control members
Vibration in the camp
Deflection of the diaphragm
Distance measurement in liquid
Dynamic investigation at the fuel injection nozzle suppliers
Eindringstudie and impact study
Positioning of parts
Vibration investigation at the Piezokristall
Piston position collection (TDC)
Plunger lift
Seize from scratches
Servo control
Coil deflection
Speed measurement
Measurement of the structural deformation
Collection of the surface quality
Vibration measurement of the turbine blade
Fairs of the oscillation within the ultrasonic range
Controlling the process in the vacuum tap characteristic measurement and cock stroke measurement
Automatic partial investigation
Camp/wave-dynamic measurement
Commutator profile
Computer non removable disk assembly
Deformation study
Distance to glass
Distance to paper
Distance to plastic
Dynamic expansion
Non removable disk thickness
Process control
Elongation of the wave
Wave orbit
Collection for structural deformation
Fairs of the surface quality
Stretch and oscillation of the turbine blade
Ultrasonic vibration
Application in the ultra high vacuum
Schwingungsanalyse
Twisting |
|
Highest quality in most compact form, that is that
SENC 50 of ACU RITE.
The small dimensions and the high accuracies of this taper roller bearingled top illumination measuring system are ideal conditions for the employment in the measuring technique.
* Compact dimensions
* Dissolutions of 0,5 µm to 5 µm
* TTL and similar signals
* Measuring lengths from 50 mm to 525 mm
* Coded reference marks -
Position Trac
|
|
Precision graduations are probably one of the most sophisticated part of all optoelectronic systems.
Linear industrial measuring systems and shaft encoders of today are both dependable and offer high performance.
We provide the electronic industry with a wide range of standard professional scales, discs and reticles as well as customized applications.
Master and serie parts will be made in house and we have the ability to meet customers specifications and special requests.
Production takes place in class 100 clean rooms wich is absolutely necessary to achieve the highest standard of quality.
Customer designs can be accepted in any of the following design formats: GDS II, AutoCAD DWG or AutoCAD DXF.
Our quality, performance and environment management comply with DIN EN ISO 9001 and DIN EN ISO 14001 standards. |
|
The Model 9717 is a high-resolution incremental encoder
that offers direct measurement of linear position or speed
without contact between the reading head and the glass scale.
When used with the optional HR2B or HR2C interpolator,
its optical resolution can be electronically increased and the output provided as quadrature square waves plus index from RS422 differential line drivers. |
|
Linear encoders
Sealed linear professional encoders are protected from dust, chips and splash fluids and are ideal for operation on machine tools.
Exposed linear encoders operate with no mechanical contact between the scanning head and the scale or scale tape. Typical areas of application for these encoders include industrial measuring machines, comparators and other precision devices in linear metrology, as well as production and measuring equipment, for example in the semiconductor industry.
With incremental linear encoders,the current position is determined by starting at a datum and counting measuring steps, or by subdividing and counting signal periods. Incremental encoders from HEIDENHAIN feature reference marks, which must be scanned after switch-on to reestablish the datum. This process is especially simple and fast with distance-coded reference marks.
Absolute linear encoders require no previous traverse to provide the current position value. The encoder transmits the absolute value through the EnDat interface or another serial interface.
Length gauges
Length gauges from HEIDENHAIN feature integral guideways for the plunger. They are used to monitor measuring equipment, in industrial metrology, and also as position encoders.
|
|
|
|
Linear encoders, Linear displacement sensors
